After you install windows, 10 (v.13.3.2.35) cannot connect to my iphone iTunes 5. No help available?
After you have installed windows 10 on my laptop, I lost the ringtones I had installed on my iPhone 5 (iOS 9.2) and recorded in my book, nor can I install them again because (v.13.3.2.35) iTunes could not connect to my iPhone.
Try the following:
- Open Control Panel > Device Manager
- Plug in your device
- Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver
- Right-click and select software update of the driver...
- Click Browse my computer for driver software
- Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers - Click on let me pick from a list of drivers for devices on my computer
- Click on Apple Mobile Device USB Driver
- Click Next, then close and exit the Device Manager
Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If not try a complete tear down and rebuild in accordance with the resolution of the problems with iTunes for Windows updates.
TT2
Tags: iTunes
Similar Questions
-
Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __
I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.
Thanks for listening
Hello
· Did you do a clean install of Windows Vista without formatting?
· How many letters pilot are there on the system, for example C:\, D:\?
· The number of records your C:\ drive?
Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.
If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.
How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista
http://support.Microsoft.com/kb/930527
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP Envy 17 t-j100: where is beats? And the sound is bad after you installed windows 10
So I installed windows 10 when he pulled out a few months back. When I install my audio beats is completely left! As this laptop is shipped with it. He was the symbol engraved on it so the reason that this laptop was so expensive in the first place with audio beats adding (I know that Hp has probably had to buy the rights or something and so increase the price). That being said, my audio beats went and my sound is too bad. As the volume is low (yes I made sure it's not muted and checked my sidebar, you know one next to the time on the screen and also the video player or the music I listen too and also the audio Manager but nothing is). Also, my audio changed too. It used a different name that according to me, but after the update is "IDT High Definition Audio CODEC". I've also updated my driver, but even once, nothing worked.
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe
When finished, press and hold the Windows key and press R
In the run window, type devmgmt.msc and press to enter.
In Device Manager, expand sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe
When the reinstallation of Chipset is finished, stop the laptop.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation. When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.
Kind regards
DP - K
-
After you install Windows XP on my system, I can't activate any key in this regard.
Work with multiple Codes are not valid on my computer.
I recently installed Windows XP Professional SP2 on an old computer in my company office. When it was over, I started windows update and I was told that my key is not valid. I went into regedit and changed the OOBETimer so that I could enter another code, activate Windows using, I received from winkeyfinder on another computer in the company. This key was supposed to be invalid, so I asked my boss. He used winkeyfinder on his computer and had the same winkeyfinder key returned on another working computer. Then, he contacted an old workman and got two more known keys to work. After entering the Windows activate both would also be invalid. Any ideas?I recently installed Windows XP Professional SP2 on an old computer in my company office. When it was over, I started windows update and I was told that my key is not valid. I went into regedit and changed the OOBETimer so that I could enter another code, activate Windows using, I received from winkeyfinder on another computer in the company. This key was supposed to be invalid, so I asked my boss. He used winkeyfinder on his computer and had the same winkeyfinder key returned on another working computer. Then, he contacted an old workman and got two more known keys to work. After entering the Windows activate both would also be invalid. Any ideas?
If they are retail or OEM, the key can be activated on a single computer. Why di you think they can be activated on more than 1 computer at a time?
-
After you install Windows XP on a new hard drive, I am unable to activate it.
Original title: key not turn
After put xp to new hd key entered went to the Activation Center and they disabled key how can I fix?
original title: impossible to activate
Hi DonWebb,
- What happens when you try to activate Windows XP? You receive an error message?
- Where you successfully able to install Windows XP on the new drive?
Refer to the article below for more information on activation of Windows XP.
How to activate Windows XP
-
I tried to install Windows Vista Service Pack 2 last night (after it has automatically updated several days ago) and it appeared to get 100% up-to-date point and he said of without shutting down your computer. I left the computer for a while and I think it has restarted and it got stuck on this message! OXC190036! 4319/76322 (mscorsec.dll) for about 2 hours before I turned it off. The message is still there when I try to restart and recovery mode is not able to help. Any suggestions? (It's a HP laptop on a 1 1/2 years and ran very well until now)
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.
Microsoft free support for Vista SP2 at the link above.
See you soon.
Mick Murphy - Microsoft partner
-
Upgrade SSD and allowing the UEFI again after you install Windows 8
Hi, having a problem w / install Windows 8 on 128 GB SSD using boot inherited (to easily boot from CD/DVD) and then return to UEFI boot sequence. Model is Dell Inspiron 17r SE. I'm absolutely not an expert on the terminology and technology, so I hope that I am using the correct terms. I removed the 1 TB disk that was originally shipped w / to settle more easily. I am able to install correctly to win 8 to the new disk (using a disc Dell win 8). After I reboot and try to come back back in the UEFI, I get a reboot constant return to the menu of the BIOS/legacy/Windows, UEFI, parameters, Diagnostic Boot Manager. Windows 8 will start only if Legacy option or boot first hard drive is selected. I DO NOT have the msata SSD, so my problem is not in the driver problem intel matrix (or whatever it's called).
I looked at the PDF of installation of windows 8 in the wiki and forums and basically tells you to put the computer in legacy mode and install Windows 8, it does not say you can return to the UEFI boot. The only thing I do not according to who download drivers SATA on USB/add iso and loading them to install. That would be the question? I wouldn't guess.
I have also tried to hit SHIFT + F10 to install and enter Diskpart, select disk 0, Clean, convert the GPT and exit and then the installation. No change. Am I supposed to completely install Windows 8, go back to install the drive, do the SHIFT + F10 sequence and then install then it would convert my GPT disk? I would assume install Win 8 would like to ask if you had UEFI and law/format accordingly.
Questions or comments, please let me know. I would like this mode to get started more quickly. It's fast now through the bios boot, but I wish it were through the UEFI.
When you use the legacy mode to install Windows 8, your setup application assumes that you want to format the SSD as a MBR disk. That's why your system keeps jumping from UEFI. Try to remove your current partitions (the disk must be empty to start), change your mode UEFI system configuration option and using the F12 boot menu a time. Your computer must have an option on this menu to start your DVD/CD drive UEFI mode. When you reach this point, remember to select the option to format the drive as a GPT disk. UEFI mode can manage data the MBR and GPT disks, but if you want to start to UEFI, I'm sure the system drive must be a GPT formatted the player so that there the UEFI boot blocks.
-
Windows says no audio output device after you install windows 8 pro in my desktop computer.
* Original title: sound problem
After you have installed windows 8 pro in my desktop my windows says no audio output device is installed, I am already updated my audio driver in Device Manager, but its cant work, I'm also controls to restart windows audio in services.msc you please try to help me solve this problem
Hello
Press the Windows key + R to open the run
Type dxdiag
Click Ok
Click on the sound tab
If the drivers have been omitted you won't see a name only no Loaded device
If you do not see a charge device click Test DirectSound
If the Director plays with sounds, but you can not hear, check your speakers that can be turned off, disconnected, or broken. Verfy pregnant are very good.
Click Exit
If the speaker is fine, go to the website of the manufacturer of your sound card and search for updated drivers.
Download and install the drivers.
Return to the screen of dxdiag and repeat the test for sound
Click on the help tab if still problems
Windows will guide you through more tests
-
How to return to my previous operating system after you install Windows 8 Preview of consumer?
Install Windows 8 big mistake. You will need to reinstall Vista, but has a HP with no disc.
I installed windows 8: big mistake. Got to get back to go back to Vista, but:1: Windows 8 wiped my recovery partition
2: no disc HP
3: out of warranty so HP will not answer questions
4: have no friend with Vista which has a disc that I can use.only good news:
I have windows.old, and I saved my windows.old plus all my downloads and data.
Right, I have TO go back to Vista,
1: Windows 8 incompatible with all other programs I need, and that you use every day.
I like 8 sorry it's such a disaster at this time.
I installed windows 8: big mistake. Got to get back to go back to Vista, but:
1: Windows 8 wiped my recovery partition
2: no disc HP
3: out of warranty so HP will not answer questions
4: have no friend with Vista which has a disc that I can use.I have windows.old, and I saved my windows.old plus all my downloads and data.
In addition to reinstallation Windows of information below, you can also try this, if you have the Windows.old folder to restore your previous Windows installation:
Return to a previous system Windows using Windows.old:
http://support.Microsoft.com/default.aspx/KB/971760
Note: If you had installed Windows 7, follow the instructions for VistaPlease note: you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to back up your personal files, and then reinstall Windows from the installation or recovery media and reinstall your programs.
For more information - Windows 8 consumer overview FAQ:
http://Windows.Microsoft.com/en-us/Windows-8/FAQReinstalling Windows
HP - order of the recovery disc for Windows 7
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334
HP - restore the PC to its original state with the recovery disks:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00809678#RestoreWithDiscs
-
Will change the bios fix it? If yes how?
CharlesR salvation,
This concern is usually caused by an incorrect configuration of the BIOS of your device settings. If you have recently installed Windows 7, then most likely the boot priority is always set to the optical drive or USB (depending on which you have used in the installation of Windows 7).
The BIOS settings are dependent on the manufacturer of your device, this is why we invite you to contact the manufacturer of your device for assistance by changing its settings.
Kind regards
BIA of Hamilton
You can use the mark as answer button, if this post responds to your request.
-
No audio device after you install windows 8 in dell latitude d610 how can I fix
Just installed Windows 8 in Latitude D610... no audio device comes silent... y at - it an easy fix?
You have posted a question of Windows 8 in a forum for Windows 7 .
Repost in Windows 8 here forums
-
I downloaded Windows XP Service Pack 3, yesterday, Microsoft's official site, and after that I managed to install successfully, it makes my computer continuously.
I searched this problem with Service Pack 3, and he seems to have an impact on nearly everyone who uses it.I also searched for solutions to this problem, but they do not work for me after that I tried them.I would greatly appreciate anyone who has solved this problem and did Service Pack3 achievable without having their computer restarted constantly.Hi Robert,.
I managed to solve the WinXP SP3 reboot loop by reinstalling WinXP fully and then install SP3.Now, the reboot loop disappeared and I can use SP3 without any problem.Thank you very much for your help and assistance.I really appreciate it.Best regardsDaniel -
Satellite A30-514: problem of USB after you installed Windows XP SP2!
I have a satellite A30-514. I clead the HARD drive, reinstall the software from the recovery CD I got with the PC.
After that, I launched Windows updates and installed SP2.But now my USB only recognizes the mouse and nothing else, when I try to connect a device told me that there was an error on the data and the installation cannot last. I tried reinstalling the driver from chipset from the CD, but nothing happened.
Hello
Service Pack 2 does not have hardware redetection of embedded devices. I have the same problem on my S5200 and I just refresh the Device Manager, and after that, it was all right. So, try this one. -
Several problems after you install Windows XP on TE2100
I have a TE2100 and then I put in place the new operating system windows xp professional after finish I open window but not display full right is missing about 1 Inc. (upper left butom OK full) I search the device have yellow question mark '? ' "PCI Device" device
How can I do it please tell me. Original card on Nvidia Geforce 4 220 (I don't remember)I have problem to even some bodies in the forum is the member name Stockcar44 you can watch on my link:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31914&TSTART=0
I'm sorry for not good English because I'm Thailand people
Thank you for all
Man, I'm sorry, but that is not acceptable you ask a question, post a link that contains the answer to your problem and ask what to do.
I can only tell you what is written in the you´ve link posted: check the BIOS if "full screen" is enabled and updating your Videodrivers.
That will solve your problem.
See you soon
-
On my office workstation (Windows Server 2008 R2), I use Outlook 2010 to network and business-related emails. I installed Live Mail 2011 for my personal mail (hotmail, gmail, yahoo, etc) in order to keep it separate and open it only once or twice a day. I said to Live Mail was not the client by default, but all 60 seconds or so he tries to assign the .eml file type to itself in any case (even if it is not running). I've got WinPatrol keeping my setup, but I don't want to say no to him, "do not allow this change" once per minute. How can I send live to accept his secondary position and stop trying to run away with the .eml file type?
original title: let my Filetype Alone!There is no default program to manage the eml file type in Server 2008 R2, and is not one that is recognized by Outlook. I would suggest you go ahead and set the eml file type opened by WLM under control panel | Default programs. Then you can leave it alone, I hope. If not, then ask in the forum here WLM: www.windowslivehelp.com
Steve
Maybe you are looking for
-
I don't want firefox as my internet browser more
I want three browsers as my internet, IE8, Firefox and Chrome browsers. How do I do that? I don't want to just Firefox.
-
EDIT MESSAGES - cannot change new messages.
Dear support, First of all, thanks for the chat message number address updated. Second, there is another question about modify / delete the new message sent by me. You please consider this also, it is a serious and it must be resolved. I have attache
-
I have a bank I have to use Google's browser instead of safari to be able to download and view my monthly statement. Auto-complete in safari on id and psd won't AutoFill to this browser. What can we do to make this right? I have safari 9.0.2 have a
-
The printer only send the paper in the printer, but doesn´t impression on her
Hello I just bought a HP Deskjet 3520 printer and I put in place with the app eprinting of my husband and my own phone. It works perfectly on my husbands phone, but when I want to print the printer send just a piece of paper in the printer from my ph
-
Want to m6 1225dx: hard drive
Whiles run check the system diagnostics (text comprehensive system) he told me that the hard drive optimized DST: software error, check processor: missing module. How can I solve this problem