AI file is empty when you open in PS

Similar Questions

• Cannot create document empty when you open the label printer software

  I installed the software to store 8 labels intermec for my label INTERMEC PF8t printer, when I try to open the message cannot create an empty document when you open the printer software labels appear. Help, please

  Hi Phaphama,

  ·         Did you do changes on the computer before the show?

  ·         He has already worked on the computer?

  Follow these methods.

  Method 1: Uninstall and reinstall the software and check if it works very well.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  If the problem still persists, contact the manufacturer for more help and information.

  http://community.Intermec.com/Intr/

  http://www.Intermec.com/support/index.aspx

  http://www.Intermec.com/products/pswlblshop/index.aspx

• Screen reader works but see window empty when you open a Word document

  Original title: I am currently setting up my screen reader, Windows Vista Home Edition and have successfully by reading everything except the content of windows. Example, you open a word document and I see the text, but the screen reader sees an empty window.

  Thanks for any help you can give.

  Hi MacGyver Fan,

  Narrator Windows you use? Let me know if you are using a third-party application

  You can follow the steps mentioned in the link below

  Troubleshoot Narrator

  For more information, please visit the link below

  Hear text read aloud with Narrator

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• File name changed when you open a Word document of

  At the opening (don't save) a Word document from a web site, I have a computer that maintains the original file name and a computer that displays the file name as Tmp #XX.tmp (where # are the numbers and XX are characters). Why the second the first different computer and how do I set up to keep the original name of the file?

  This happens on a computer Windows 7 with Word 2012 and using IE9 and Firefox 14.

  Thanks in advance for an answer.

  Bob George

  If you test in "Safe Mode with networking" think that any difference in behavior?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  As you are only open files and do not save them, they seem to be saved as files temp in your Temp or saved to your Temporary Internet Files folder.  Have you tried to clean the two files and see if that makes a difference?

• Path of file by default when you open explores in Vista

  When I right click on 'Start' and choose 'Explorer' it always opens "Menu of C:\Users\Name\AppData\Roaming\Microsoft\Windows\Start", I would like to change to another set of folders and files.

  Where should I go to set the new path?

  Hello

  Don't know which can be changed but you can make a shortcut on the desktop that
  Opens Explorer at your favorite place.

  Create a shortcut to open the type explore - Start - in the start-> Windows Explorer box
  find the head of list - right click on COPY - then go to the desktop - right-click-PASTE

  1. make sure that the icon opens a Windows Explorer.

  For this one or an icon that opens to explore just RIGHT CLICK - PROPERTIES

  On the SHORTCUT TAB - target line add C:\

  There is a space after explore.exe and C:\ or path that you specify.

  It's mine: %SystemRoot%\explorer.exe C:\

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to remove files that indicate when you open Adobe reader XI? under recent files!

  

  Do you delete the files or delete this list?

• Excel file is empty when the burst!

  Hi all

  RDBMS: 11.2.0.3.0

  Oracle Applications: 12.1.3

  I'm new to break and I'm having a problem.  When my output type is Excel the file attached to the email is completely empty!  If I just change the type of output to PDF, my data is here!

  Anyone know what is happening here?

  Here's my break control file, I have some data for a sanitized public viewing...

  Any help is greatly appreciated!

  {code}

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < = xmlns:xapi xapi:requestset ' http://xmlns.Oracle.com/OXP/XAPI "type ="break"> "

  < select xapi:request = ' / MWACIIER/LIST_G_INTERFACE_CONTROL/G_INTERFACE_CONTROL/LIST_G_ERRORS/G_ERRORS ">

  < xapi:delivery >

  < xapi:email server = "00.000.0.00" port = "25".

                       from=" [email protected] "RΘpondre α =" [email protected] ">

  " < xapi:message id ="123"to =" ' [email protected] 'cc =' "attachment = 'true' content-type 'text' subject = 'Test out' = >

  < body >

  The error report is attached ready for you to review. < br / > < br / >

  Text here! < br / >

  More text here! < br / >

  < / body >

  < / xapi:message >

  < / xapi:email >

  < / xapi:delivery >

  < output = xapi:document "test2.xls" output-type = "excel" delivery = "123" > "

  "< xapi:template type ="rtf"location="/ua4001/oracle/MFSGUAT/apps/apps_st/appl/xbol/12.0.0/xml/MWACIIER.rtf "> < / xapi:template >

  < / xapi:document >

  < / xapi:request >

  < / xapi:requestset >

  {code}

  Here's my problem, it's related to the messaging tool that I use to watch the attachment...

  You use Microsoft Outlook Web Access (OWA) 2007 access one
  mailbox on a computer that is running Microsoft Exchange Server 2007 Service
  Pack 1. When you download a .xls file attachment and then try to open the
  file, the downloaded file is empty.

  This problem occurs if the .xls file contains XML data. In
  Exchange Server 2007, if a file that contains the XML data is associated with a
  message, the XML content in the file is removed when you open or save it
  attachment using OWA.

  To resolve this problem, install the update rollup 6 for Exchange
  2007 service Pack 1.

  For more information about the update rollup 6 for Exchange Server 2007 Service
  Pack 1, see the following Exchange Help topic:

  Description of
  The update rollup 6 for Exchange Server 2007 Service Pack 1

  ( http://go.microsoft.com/fwlink/?LinkId=152555)

  For more information on how to get the last Exchange
  service pack or update rollup, see the following Exchange Help topic:

• camera raw is empty when you making adjustments to files that are already open in photoshop

  My camera raw empties when you making adjustments to files that are already open in a layered photoshop file. Someone else has this problem?

  I use camera raw on mac 10.10.4 9.1.1.

  .

  Hi [email protected],

  you go under Camera Raw preferences and turn off the option to use the GPU and then check request

• When you open a file fdf Firefox goes into an infinite loop of opening new tabs. The only solution is to reboot the machine.

  When you open an fdf file, firefox goes into an infinite loop of creating a new tab, reading a local file (I think that a copy of the fdf file), opening a new tab, read the same file, etc.. The only solution is to reset the machine.

  For now, I guess that the solution is to open the FDF externally (i.e. in Reader or Acrobat and not the plugin).

  You can search for known bugs about Marlon or submit a new report in Bugzilla.

• When you open a new tab, how can I specify a site or empty? My open tabs to a site I want to see.

  When you open a new tab, how can I specify a site, the home page or empty? My new tabs open to a site that I don't want to see.

  This can be done easily.
  Just install the addon FEATURE My Homepage

  You can get it here:

  https://addons.Mozilla.org/en-us/Firefox/addon/my-homepage

  I hope this helps.
  Thank you!

• Windows Explorer crashes when you open any folder with MPEG2 files.

  WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

  Hi kathyd,.

  ·        You did changes to the computer before this problem started?

  Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

  Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When you open a photo to the Lightroom file in Photoshop the photo file size is automatically reduced. How can I fix it?

  When you open a photo to the Lightroom file in Photoshop the photo file size is automatically reduced. How can I fix it?

  misterv1 wrote:

  Example image

  3504 x 2336 @ 240 ppi JPEG original image size now the size of the image is 3504 x 2336 @ 72 dpi.

  So, in my words, your picture has not changed somehow in Photoshop. There is no sense and doesn't matter the number of ppi. The important numbers are pixels.

• Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no p

  Hello. I explained the following error in InDesign. When you open a file that is stored on a server, I get an error message because the file is already open, or don't have sufficient permissions. If I copy to the desktop and open it, I have no problem. Can someone help me? Thank you.

  Is there a file .idlk remaining on the server which is not removed properly?

• When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  When you open the bridge I get empty frames, I have to click on each one to open and see the picture, is a person tried before and what can be done to fix the problem?

  Reset preferences, reset the default workspace, and purge the cache.

  Damaged preferences or workspaces can cause unexpected behavior in Adobe Bridge. Purge the cache can solve problems of the thumbnail display.

  • Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.

  • Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.

• When you open a PP CC2015 file I get the message "this file has been saved in an earlier version and must be transformed", but it was not

  When you open a version Premiere Pro cc2015 file that I created about 3 to 4 months ago I get one convert a project box pop up with the message "this project has been saved from a previous version of Adobe Premiere Pro and must be converted" select OK to continue and a box from "media location" will blink for about half a second then I get a black screen with only the Adobe menu drop down at the top.  From this point of Premiere Pro jams up, none of the menu items work, I just get a windows error chimb when I try and try to choose something or even try to quit the program.  I have to use Task Manager to close the program.

  The file is without a doubt a CC2015 version, I even reinstalled CC2014 to check that he would not open the file as it was created in a later version.

  I tried to open another file from the same era created about 4 weeks later, I received the same message but it converted and added a "_1" the file name.

  I went back to some of the automatic backup of the original file versions and get the same result.

  Any ideas?

  Hi hkjlgfdhgehkjbrf,

  Welcome to the forums Adobe and sorry for the late reply.

  I had this weird problem before. Ann was pointed in the right direction. Because Premiere Pro does no clicks (as you mentioned above), I suggest you to reset preferences and start over.

  -Rename the folder Premiere Pro Old_Premiere Pro under Documents > Adobe.

  Note: You will lose your customization and modification of keyboard shortcuts.

  Hope that helps!

  Thank you

  Regalo