AIR 2.6 ImageDecodingPolicy problem

Similar Questions

• configuration cisco air-ap1142n-a-k9 problem wpa2 wireless access point

  HI people,

  I am brand new to Cisco Wireless, just that I bought new wireless access point air-ap1142n-a-k9 cisco, try to configure the configuration of wpa2 for security reason, but impossible to configure in any mode security. So my AP is currently no security / encryption mode.

  Could someone can help and suggest me I will appreciate if I get all documents, so the security problem can be solved.

  Concerning

  Sanjeev

  OK great

  ----------------------------------------------------------------------------------------------------------------------

  Be sure to note the correct answer and mark the thread as answered

• Flow on AIR-PI21AG-E-K9 problem

  Hello

  I set up a LAN wireless in a:

  -WLC 4402-25

  -AIR-AP1121G-E-K9 converted to light

  -AIR-AP1121G-A-K9 converted to light

  -Client adapter AIR-PI21AG-E-K9

  I have a problem in a floor of the building where 3 AIR-AP1121G-A-K9 and an AIR-AP1121G-E-K9: after connecting to the WLAN, the client adapter to get a speed of 54 Mbps and it is connected to the point nearest access (AIR-AP1121G-A-K9) but after a few minutes, it wander to the AIR-AP1121G-E-K9 with a flow rate of 1 Mbit.

  Please can you help me e to solve this problem?

  Thank you

  Of course you... you want to keep the less standard. WLC and s AP too on the same client cards and regulatory field. According to the regulatory field, some chains and TX levels change.

• iPad Air folded with scanner problems

  Hello world. I hope someone can give me some guidance. I bought my wife an iPad Air a bit backward and our 2-year-old got a hold of it and cracked the screen. We paid for a replacement of the screen off warranty and bought a high quality screen protector (the iPad is always kept in a cover enough course).

  A few months later (I don't know exactly what happened, but I suspect that 2 - year - old still) we found the cracked protective screen (the replacement screen is fine) and aluminum on the back of the iPad was ever bent on one side/corner. The screen is slightly detached from the envelope back along this edge, and the screen/digitizer is less reactive then normal. A small strip in the middle of the screen does not respond to touch properly.

  It is even useful to repair at this point (or aluminum rear housing can even be repaired?) Or should I just bite the bullet and get a new iPad (and of course, keep the 2 years away.

  Thank you

  It is not repairable, but you can get a replacement under warranty out of Apple for less than buying a new iPad, if you don't want to spring for a replacement again full price.

• Adobe AIR installation has encountered a problem and needs to close

  When I try to install htc sync, it asks you for adobe air and when I downloaded 2.6 on adobe.com adobe air and try to run the installer, it says "Installation of Adobe AIR has encountered a problem and needs to close" how to solve this problem?

  Hi sportzbangalore,

  The following article should be useful to solve the problem you are experiencing.

  Troubleshoot installation AIR | Windows

• air and sqlite - accumulation of results problem

  Hello

  I had problem with sqlite in air.

  The problem is that sqlStmt.getResult () .data is collecting data from Select statements separate, when there are separate results. As in this example where I call the function "select" once and AFTER this result I call again with different query.

  public void select(q:String):void {}

  Conn.Open (DBFile);

  sqlStmt.addEventListener (SQLEvent.RESULT, selectComplete);

  sqlStmt.text = q;

  sqlStmt.execute ();

  }

  private void selectComplete(e:SQLEvent):void {}

  oSqlReturn = sqlStmt.getResult () .data;          It's here sqlStmt.getResult () .data remembers previous results and adds those current in the table.

  Conn.Close ();                                                  but here sqlStmt.getResult () is null

  sqlStmt.removeEventListener (SQLEvent.RESULT, selectComplete);

  }

  So after the second returns Select I'm .data (sqlStmt.getResult with results of the first and the second statement).

  Maybe one of you had a similar problem and is able to help me with this.

  Thanks for help. It is recommended to use different instances of SQLStatement. But it wasn't the case.

  I changed to an asynchronious connection and I added SQLMode and now it works.

  So instead of

  Conn.Open (DBFile)

  now, I got this:

  conn.openAsync (dbFile, SQLMode.UPDATE);

  So I think that the problem was because I was listening to events connect synchronious result.

• How to factory reset a Macbook Air A1465

  I just got a Macbook Air A1465, the initial problem was the laptop GET a little water on the keyboard. The computer turns on and get a blank screen with the mouse, pointer and bright buttons and the volume works.

  I tried to turn it off and the laptop do nothing when I pressed the power button.

  I totally discharge the battery and tried to turn back the command + R keys pressed and I had the same blank screen.

  Any suggestion?

  Thanks in advance...

  Please return the Mac as soon as possible. Liquid is progressive.

  Best.

• Problem with keyboard: some keys return two, not one, characters

  I have a MacBook Air 11 '' mid-2012 128 GB SSD model running OS X Yosemite 10.10.5 and my keyboard has developed a strange problem occultation key repeat.  Whenever you press the "3" button, the system generates thus simultaneously a '3' and '6 '.  This motif is repeated this diagonal of the keyboard down, i.e.

  '3' generates a '3' and '6 '.

  'e' generates an 'e' and a 'y '.

  "d" generates a "d" and an "h".

  'c' generates a 'c' and a "n".

  The reverse is also true, that is, a '6' generates a '3' and so on.  Curiously, the sign '=' generates a character "§" as well, a special character generated by keeping down option and pressing "6".

  (This combo generates a ' § ' and a ' £', hidden under the '3'.)

  The same problem occurs when you use the Shift or Control keys as modifiers.

  I can work around the problem by using either a connection wireless Bluetooth or wired USB keyboard (like using the "Keyboard Viewer" option under "System Preferences"), but that kind of defeats the point of having a laptop as a MacBook Air, Yes?  The problem is intermittent, but becomes very annoying.  (Try to type a password with such a mess!) It sounds like a mechanical problem requiring a possible replacement of the sale wholesale (and), but I hope someone out there can have a software or another solution.  Thank you!

  Raoul_Duke wrote:

  I can work around the problem by using either a wireless or wired USB Bluetooth keyboard

  That certainly points to make it a hardware problem.  It is difficult to imagine a software problem that would not affect both internal and external keyboards.

• Is it worth to spend on the Apple Care for repair on my Macbook Air?

  My macbook air rcently got a problem in marketing and it is bound to be replaced by a new logic board. I am a student and I find that the replacement cost is quite expensive for my budget. So I'm wondering if I buy an apple care, this will help covering the cost of this? I have run out of warranty because I bought my macbook air 2 years ago and it is a technical mistake completely since I have never had any accident with my macbook air.

  Apple Care cannot be purchased so that your Mac is still under the one year warranty. It's too late to try to buy it now. http://www.Apple.com/support/products/Mac.html

• On the question of the deployment of air

  Hello, I have a few applications that I am trying to accommodate the deployment of air.

  The problem is that when I run the browser blackberry .jad file to download, there is no information version, vendor name or description on the download screen. The app still has downloads and runs correctly.

  If I point the browser to the file .jar instead, the info IS there, but the download fails.

  I'm sure it's something simple, but can someone tell me what I'm missing here?

  Thank you!

  -Joel

  Hello

  In the jad file option as there

  MIDlet-Version

  MIDlet-vendor

  Write the text you want here.

  NOTE: the version number must be in this format 1.0

• 1 crash / 2.HD - Format without turning off. / 3. problems with reinstallation

  Dear community,
  
  Yesterday I had to reformat the hard drive of my MacBook Air because of a total crash suddenly. Unfortunately my Creative Suite 5.5. has not been disabled previously. Today, I tried to reinstall Master Collection CS 5.5, but I'm not allowed at the beginning. For installation, I use my iMac DVD player (MacBook Air does not have a DVD player). So far, the installation via drive iMac has always worked perfectly. When you try to install the Master Collection on this path, today, the following error message is generated on my MacBook Air (the error message occurred when I clicked on the icon 'Install'):
  
  "You cann't use the program" Install "-it may be damaged or incomplete." "
  
  On iMac "Install program" opens easily, so the DVD is not the problem. The connection between the iMac and MacBook also works perfectly (f.e. I can open the file 'README'.pdf and other file on the MacBook Air). Only install it icon "" does not work. You know why I can not start the installation on the MacBook Air icon?
  
  The problem has something to do with Creative Suite disabled correctly?
  

  I would be great to hear your suggestions,
  FD

  Copy the installation files in Office directory of a macbook air (using a USB key, for example) or download the installation files.

  If you see an error of activation of the account, which would be related to your disability to disable a previous installation.  in this case, contact support adobe during hourly pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and ask a county of activation reset.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• What happened to this known issue with the AIR 18?  Is it fixed? (CSA 2.0, type coercion: 3578605)

  In the recent past, the three ads documented SDK 18 AIR outlet some known problem:

  • ASC2.0 update app reports an error of Type with MovieClips CFC constraint (3578605)

  (For reference: 09/06/2015 - news release - 18 AIR Runtime and SDK |) 08/07/2015 - shared - AIR 18 Runtime and SDK | ( 11/08/2015 - shared - AIR 18 Runtime and SDK )

  Last week, the announcement of the AIR SDK 19 (21/09/2015 - release - 19 AIR Runtime and SDK) there is no mention of whether this is still a known issue or a fixed.  It's a hard problem to test, and it would be good to know if Adobe believes that this issue has now been addressed. (Or... If someone else in the community has evidence suggesting that this problem has been fixed, which would be also good to know!)

  In addition, it would be useful if someone could tell me if this internal bug in question (3578605), corresponds to this public one: Bug #3562040-2.0 app compiled CSA Type coercion report crashes with MovieClips in CFC

  Thank you

  Russell

  Hi Russell,

  This is still a known issue and that I plead.  We had security of mitigation (in other areas) which had priority over that in our press releases press.  He put open/tofix in our database bug with a priority 4/4 and (higher) gravity and I hope we can come back soon.

  Thank you

  Chris

• Mobile of AIR application using ringer volume, no media volume

  So I have an application written in AS3 using AIR Mobile. The problem is that the volume of enforcement seems to be related to the volume of the ringtone on my phone, not the volume of media. How to attach my application volume to the media instead of ring? If it makes a difference, I develop in FlashDevelop. Thank you.

  Look into this:

  SoundMixer.audioPlaybackMode = AudioPlaybackMode.AMBIENT;

  Play Back mode controls how much is followed. The default value must already do what I think you want to do.

  Look here for other settings:

  AudioPlaybackMode - Adobe ActionScript® 3 (AS3) QAnywhere

  'media' might be the one you want.

• AIR 15 on iOS tlfText not rendered

  I think I have a bug, but I'm still not convinced that it's the fault of the air.

  I have an AIR applications for iOS, Android, Windows and Mac Publishing.

  I use the version of Adobe Flash Professional CS6 12.0.2.529

  I have a header positioned at 0,0 where to place two TLF textfields and some buttons. When I run on iOS 8 published under the name AIR version 15, I don't see my text, buttons display very well. When I run on Android, Windows, or Mac published as AIR 15, the text is very good. I placed my text under the heading (thinking maybe it was a black text on a black background - don't tell me you have never done this!)-the outcome proved the text was there (the "body" is positioned under the header and was pushed down when I did) - but I still didn't have my text.

  When I compile my app with AIR 14, everything was fine, the text just like on Android, Windows and Mac released with AIR 15.

  The funny thing is that I use tlfText exclusively in the entire application and all THE OTHER INSTANCES are very well, that it is precisely these text two fields render on iOS.

  On a side note, in any case, I put my tlf text using tlfMarkup (mentioned because it doesn't seem to be very popular that I can't find many articles or support on this issue, I'm starting to regret this choice)

  Any suggestions are appreciated.

  UPDATE:

  I tried to compile with 15.0.0.249 and 15.0.0.274 AIR (BETA) but the problem persists.

  They said adobe no longer supports the tlftextfield. I had to spend all the flow of text. After that I started, it was an easy transition.

• Function keys not working only not with screen sharing

  Sierra running on all machines. Until the update, I would use on iMac 2014 screen sharing to access a Mac Mini 2011. Everything worked very well. However, after update, function keys no longer work through screen sharing. I confirmed the screen sharing is the problem, as functions correctly with Mini bluetooth keyboard, and also logging since MacBook Air gives the same problem from the iMac. It wasn't a problem during execution of El Capitan or even when I used Sierra Beta on iMac.

  Anyone has any suggestions or has met this themselves?

  Have you tried using fn function keys?

  IE: fn + f2