Password by default Ix4 - 300 d
Hello
I have recently buy an ix4 NAS storage - 300 d.
But I don't know what is the default username and password.
Hello shahab_shv,
There is no default username or password.
You can find the manual for the ix4 - 300 d here:
https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQzNjgxMDUxOS9zaWQvU2ZTN...
Looking for the manual for the word "reset" and you'll find instructions on how to perform a reset of the safety.
Tags: Lenovo Products
Similar Questions
-
ix4 - 300 d not accessible over the internet or Storage Manager lenovo
Hello
I bought Lenovo ix4 - 300 d for a long time now and it was fine up to that of a few weeks, all workers
I ping the NAS drive to the IP address and all that is fine back.
I did a lot of research online and have tried just about everything I can find on the subject to try to resolve what I will list below.
- Hold Reset button 4 seconds (reboots but no change)
- Hold Reset button 15 seconds (reboots without change)
- Reboot the router / modem (no change)
- To connect to a new network (no change)
I can see the ix4 - 300 d in my area of windows network but cannot access a file because it requires a username / password. Shows NAS in "the other" and "computer."
It is in 'computer' that the NAS is asking me user credentials.
I want to completely reinstall the software on the NAS, but I am struggling to find the .tgz to.
When I have the software is as simple as plugging the USB on the front of the NAS and then boot from USB?
I could do with help as soon as POSSIBLE because this drive must be used for backups of the company.
Kind regards
Nathan Langer
Vizion5 Creative Media Agency
Hello digitaliss,
You will need to contact your local support directly to a film recorder, you can do so here:
https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722 -
IX4 - 300 d frozen at 69% during file system repair
My Lenovo/Iomega IX4 - 300 d had the file system error, so I made the repair in offline mode, but he has been slain all night att 69% and Internet, SSH or the LCD on the front respond to anything...
Obviously, I have no choice but to restart the thing, but I * am * curious if others have seen the same thing and if a cause is known?
I copied the data manually, rebuilt the file system, in turn copied the data and after a reboot it now seems to work...
Do not know what is the default process, but it was not stable yet in the last 8 hours since I made the Ext4 file system manually!
I was just curious if anyone else had this behavior too...
-
Hello
I tried to turn on notifications of e-mail in the ix4 - 300 d, but the testmail is never sent. I use gmail-Server smtp (smtp.gmail.com). How can I configure the e-mail settings to support this?
Comes to be noted - smtp settings are not required since mail sent through lenovo... Good solution.
-
ix4 - 300 d does not start after factory reset and clear disk - HELP!
Hi all
I did a rest from the factory of my ix4 - 300 d. Sellected the quick erase option.
He is now hooked up with "lenovo" on the screen.
I've tried so far:
remove all disks
No network cable
RESET button on the back (5 to 20 seconds)
and a lot of power cable in and out
removed the battery on the Board for 30 minutes...
Help...!
Hello VizBiz,
If you have tried to start with all the removed drives and NAS does not start, I recommend to contact local support and asking an imager:
https://Lenovo-AP-en.custhelp.com/app/answers/detail/A_ID/18133/session/L3RpbWUvMTM2NjU5MDgxMS9zaWQv... -
I bought an IX4 - 300 d without hard disk and first I install a Raid 0 with 2x1To HDD. Now I add a new 1 to HDD and change for Raid 5, the ix4 recognize my new HARD drive and show TB of space in the State of the system, buy I can't use this space...
The IX - 4 d 300 does not use that extra space.Any idea?
concerning
Readers need to be of the same manufacturer, otherwise the unit can accept them. This is because having discs with different specifications can cause problems with the RAID.
-
Considering ix4 - 300 d need your advice
Hello:
I intend to buy the ix4 - 300 d.
But I have a few questions which need advice.
Issues related to the:
1. can I use it to back up my sites, facebook and Twitter data?
2. is there a special procedure to use Seagate 3TO ST3000DM001 hard drive?
3. should I update the firmware immediately?
4. it seems that the warranty is 3 years. Someone did it before using it? How long can you recover your device?
Thank you.
Yes, it will be an advanced shipment so we will send you a replacement first unit, and then you will receive intsructions to create a shipping label and ship back us the defective unit in the same shipping box that was sent to you.
-
I just posted this to the thread of IOmega network storage before realizing there is a thread of Lenovo Network Storage here. Any help is appreciated!
-----------------------------------------------------------------------------------------------------------------
Hello, I'm new on the NAS and setting just has started up a new ix4 - 300 d with 4 x Seagate NAS 3TO (ST3000VN000) in RAID 10. It took about a day to end and everything seems fine, showing the ability of 5.4 to under the disk management page. Windows 7 (ultimate 64-bit) can see the device, but I cannot map it to a drive: I can't create any action, and it gives me the error "the selected function is not available because of the State of the pools.". I searched online and this seems to be a common problem, but I can't find a useful answer.
Also, what format of file ix4 - 300 d is to create on the hard drives? I used the diskpart utility to clean each drive before installing the base on what I read on the web. Thus, all the readers had no partitiion or file format. Is this a problem? But I guess that's fine since the RAID 10 has been successfully created.
Thank you in advance for your help!
WXY,
I'm not aware of any spirit of RAID 10 specific questions on the ix4 - 300 d.
I would go ahead and re - create your RAID 10.
If the problem persists, you can submit a ticket for support here:
https://Lenovo-na-en.custhelp.com/app/ask/Or, if you wish, you can first submit the ticket and ask for the health of your drive (s) to be checked.
If it happens again, I think that one or more drives a questions stay synchronized.
-
IX4 - 300 d - cannot copy files between actions or the ext disk. USB
Hi forum!
I can't work for the life of me how to move files between the shares on the NAS. I can access my computer fine actions. I have a USB HARD drive connected to the front USB port and I want to copy some files from the HARD drive to a shared folder on the NAS, but when I'm in the content browser that I have no option to copy, and there is no functionality of drag - move. That I going nuts or something blatantly obvious lack?
I want to copy data from USB directly as it is a few TB of data and copying on the LAN will take ages. It's going to be a regular thing, but I can't really put in place a copy job, because it is not the same type of data or file locations every time.
Help, please!
Thank you!
Matt
Hello MattDobson,
You will need to map the actions:
https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+map+a+network+sh...And move the data in this way, the Ext HDD will appear as its own share, but can be mapped as others.
The content in the UI Viewer is not designed to move data.
You can find documentation and downloads for the ix4 - 300 d here:
https://Lenovo-na-en.custhelp.com/app/cust_alp/p/1189, 1193/session/L3RpbWUvMTQ0MDUyNTY3OS9zaWQvZWNDc...You can download the Storage Manager Lenovo via the link above, and which should help you to map actions.
-
IX4 - 300 d / General SIN: How can I move large files between different folders?
Hi @all.
My new IX4 - 300 d arrived yesterday
After doing his RAID-things all night, now I want to move my files from my old NAS to this one.
I do this using Copy-supported by the ix4 - 300 d, which work fine.
A big problem for me: I want to reorganize some large files / directories (> 200 GB), so I have to cut and paste the files from one folder to another (all on the ix4 - 300 d, but with different user groups).
When I move files between subfolders in a folder of the sin, it works fast enough - I think here that the transfer will be treated directly by the nas server.
When I do the same thing between subfolders in different folders (which appear as various network drives in windows Explorer), it seems that the transfer is managed by my pc or laptop - and it is very slow...
I tried to move the files on my network environment (all folders are subfolders of a server: ix4 - 300 d) because I thought the problem was in my network mapping, but it does not work faster.
How will I know my ix4 - 300 d to move the files directly (without the "help" from my pc)?
Another idea for me was to do it via ftp, but my ix4 - 300 d only refused my connection (have to try a little more)
Please help me
I "solved" the problem by creating a copy of the temporary employment with the manual removal of duplicates once the task is completed. The copy job run all night.
For future problems, I must think of an another "file management".
Thanks for your response!
-
migrate from Raid 1 to Raid 5 with IX4 - 300 d
I am considering buying an IX4 - 300 d.
But what I want to know: I might consider commissioning with 2 drives in RAID-1 and later on the road buy a 3rd drive to upgrade my RAID-5.
Is this possible on the fly, which means that I can just put in the drive of the 3rd, and I can upgrade to RAID-5 without data loss?
(Yes, I would definitely have a backup before doing this, but I want to go create a new RAID-5 and have the backup copy of the backup data)
And I'll be able to upgrade my drive later RAID-5 3-4 drives?
Sorry, but I think there is no way to change the RAID level "on the fly"...
That means backup your data, Notes users and their share of privileges etc. better as all you network configuration and start from scratch.
-
User and password by default for DPM 4400
Hi, I have a DMP 4400 and I chose the reset default settings.
What user and password by default to access the http page the DMP?
The best.
Herzer.
Have you tried admin and default password?
-
ix4 - 300 d cannot define ssh root password
Hello
Can someone tell me why I can't define and enable root ssh account more?
Whenever I try to put the password on this page
https://__IP__/manage/Diagnostics.htmlI get an error message like "admin access can not be changed.
I get this error since my last update 4.1.112.33292.
Best regards
Hello sfallen,
The first thing to try is a reset of network/security.
Search in this document "Back panel" find the procedure:
http://download.Lenovo.com/nasupdate/manuals/ix4-300D/ix4-300D-4.1-en.PDFIf this fails to solve the problem, you may need to consider opening a support ticket:
https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722 -
My ix4 storage - 300 d cannot start - its not always goes to reboot. The display shows the logo, then the window with stick and 3 windows for a minute and after the restart with the same plan. Tried to do, hold RESET button with 1 min. (with hard drives and without them) nothing happens. Tried the upgrade to h4c - 4.0.8.23976 through memory stick (with hard drives and without them). Also tried to remove the markup on hard disks. Nothing helps. Give me please a few tips I can do more?
I am finding solution to my problem: pull the NAS HDD, put it to the other computer. Lenovo NAS go to garbage =) thanks for all.
-
Reset password BIOS HP OmniBook 300
Hello!
This is my first post here on the forums of HP and I have a problem. Now, I know there is already a similar topic here somewhere, but I didn't want to resurrect an over 3 years, so I've created a new.
The thing is, a few days ago, I managed to get my hands on a very old laptop HP - OmniBook 300, but the guy who sold it to me "forgot" to tell me that it is password protected. Since it is not able to remember the password, I'm stuck with a work laptop that refuses to boot the operating system (so I think it's a BIOS password in question here).
In any case, I tried everything, including pay 20 dollars for a guy who claims he has a program that can generate a master password for this old OmniBook based on a randomly generated code.
So I did what he said (and what I read in the service manual that I dug up on internet) and on the password entry screen I pressed ALT + SHIFT + F10 and some kind of code appears on the display (in the manual it says this is the encrypted password). I sent this code him and a few hours later he sent me three "master passwords" claiming that at least one should work, depending on the version of the BIOS. Unfortunately, it did not work...
In any case, I was wondering anyone here have an idea how to override the BIOS on OmniBook 300 password? I don't even bother contact HP support since I read in many places that people have tried this, but I got the answer that this laptop is no longer supported because it is too old.
Thank you for your attention and I hope someone can help me.
OK, it's not really a solution to remove a BIOS password, but I managed to start the operating system (Windows 3.1/DOS) through a 'solution '.
The problem I had is that OmniBook was protected with a BIOS and OS (HARD/flash drive disk) password. Someone suggested on the other forum, boot from a disk D, reformatting a HARD drive and reinstall everything from scratch, but it was impossible because of the BIOS (or other) password was in place.
My solution has been to try to reformat the flash card using another device. First of all, I have tried in one of my older laptops with a PCMCIA slot, but Windows XP called for appropriate dirvers. Then, I tried to use my old Pocket/handhelds computers - Jornada 720 oone both 320LX asked pilots. After this failed, I tried something that should have been the obvious choice at the beginning - I plugged 10 MB flash card OmniBook in HP 200 lx (200 LX is an old BACK pocket with PCMCIA Type II slot)... and IT WORKED! I managed to reformat the flash memory card successfully using the commands "format a:" and "fdisk100". I plugged the card towards the OmniBook and the completed system C drive is empty and available to reinstall everything automatically, "get around" the BIOS password. Now everything works as it should and the OmniBook 300 is really a great little machine BACK and now I realize why it was so popular back in one day.
BTW, I recon that this laptop was stolen a long time ago and that he kept changing the owner because we didn't know what to do with computer (HDD, locked, blocked BIOS)... until now. The BIOS password is still there, but this the hell - it works.
Maybe you are looking for
-
Upgrade to El Capitan: MS Wireless Desktop Elite no longer works correctly.
I installed my rMBP to El Capitan. I have a keyboard/mouse MS Wireless Desktop Elite that I like to use and use for years, and this upgrade broke the driver software such as It allows me to no longer share Win/Alt keys (so that the key used as Cmd is
-
Satellite L350D - 20 d - question about graphics card memory
Hi on start I want to sorry for my bad language lol I form a few days TOSHIBA SATELLITE L350D - 20 dI WIN with Vista reinstaling for XPsp3 after 29 hours of blame Microsoft for making Vista. or m.Kin another and another bootUSBpendrive and the mixtur
-
Jet 7 - unable to completely change the language of the user.
I have a new flow 7 purchased on the Microsoft Store in Germany. On initial Setup, I chose the United Kingdom as my country, my language of English and English for the keyboard. While most of the text is in English, a number of essential elements suc
-
I am asked repeatedly to install IE8 update KB2647516 every time I restart Windows. I have now done this 4 times, as can be verified by my history of update to Windows Update. Also, add/remove programs of control panel shows that this update is insta
-
Cannot connect to internet after removing a virus
Can't connect to internet after removing a virus. Said in the currency manager there is a problem with the ethernet controller and can not find a driver when he found new hardware. Dell optiplex 260 - win xp - IE8