AIR - no images after the release of export built

Similar Questions

• The host has not enough space on the boot partition to store the image upgrade. It takes a minimum of size_in_MB. After the release of space or perform an installation from the CD-ROM.

  Hi everyone, the difficulties in trying to update the Update Manager. ESX4.1 to ESXi5.0

  Error I get is below to correct the scan before update:

  The host has not enough space on the boot partition to store the image upgrade. A minimum of 299MB is necessary. After the release of space or perform an installation from the CD-ROM.

  There is enough space in the local disk

  Size of filesystem used Avail use % mounted on
  / dev/sdd5 4.9 G 1.6 G 3.0 G 35%.
  / dev/sdd2 2.0 G 107 M 1.8 G 6% / var/log
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / Boot
  / dev/CCISS/c0d0p2 4.9 G 1.6 G 3.1 G 34% / esx3-installation
  / dev/CCISS/c0d0p1 99 M 67 M 27 M 72% / esx3-installation/boot
  / dev/CCISS/c0d0p7 2.0 G 101 M 1.8 G 6% / esx3-installation/var/log

  Cannot continue installation due to the lack of space and don't have the option upgrade CD directly (of complicated issues)

  Do you have any suggestions?

  Thank you

  It sounds like this host has already been improved 3.x! In this case you will not be able to upgrade to 5.x using the Manager to update because of the small partition/boot (99 MB).

  to remedy the hosts against a basic upgrade

  ... You cannot use Update Manager to upgrade to 5.0 ESXi host, if the host has upgraded ESX 3.x to ESX 4.x. These hosts have not enough free space in the partition/Boot to support the process of update Update Manager. Use either interactive or scripted upgrade.

  André

• Buy unlocked iPhone 7 right after the release date

  Friends good day! Let's say I want to buy an iPhone 7 right after the release date before apple officially begins selling the devices free SIM card. I'd be able to come simply to store and buy, for example, an AT & T phone to use with my operator? Because I know that they would be not selling sim free phones in the first two weeks. Or do I have to buy a plan as well and become a customer of AT & T? In other words, I need now a unlocked device, and can I get one without waiting for the start of the free features of SIM card sale. Thank you!

  If you buy any iPhone outright directly from Apple full paying, it is carrier unlocked.

• Update via subject: Firefox after the release date

  I noticed that in the latest versions of 4-6, after the official release date (for example today Firefox 38.0 was moved to release and pushed to free servers and for manual download on the site) as the day coming on: firefox does not update the program and said I use the latest version (37.0.2).

  Is there a reason for this?

  My guess: version stable/Adaptive QA in the case of a major bug
  -Tire due to an uncorrected critical vulnerability
  -Not overwhelming the server load
  -Help organizations deployment of delay of 1 day instead of trying to push several critical supplier updates every 2nd Tuesday of the month.

  I bet on the top 2 reasons.

  More information available on the subsequent restitution process after the release date? Is there a period of 1 to 2 days before the additional downloads are allowed via the built-in updater?

  • I read the timing of the release, but after the next day of the release date, there is no additional info provided

  Thank you in advance!

  fired 38 of Firefox version and updates are disabled for the time being to investigate and resolve some crashes on Windows and a version of Firefox 38.0.1 is underway and will be published in the next few days.

  You can continue to use Firefox 37.0.2 for now.

  • http://download.CDN.Mozilla.NET/pub/mozilla.org/Firefox/releases/37.0.2/Win32/en-us/

• Firefox process is left running in memory after the release

  The firefox * 32 process remains running in memory after the release of Firefox. You cannot restart firefox without killing the process (ctrl-alt-delete...) or by restarting the computer.

  I'm running Windows 7 pro 64-bit and the Swedish version of Firefox 6.0.2.

  I did have this kind of problem with previous versions of Firefox.

  Firefox is already running but is not responding

  • https://support.Mozilla.com/en-us/KB/Firefox%20is%20already%20Running%20But%20is%20not%20responding

  Profile in use

  • http://KB.mozillazine.org/Profile_in_use

  Check and tell if its working.

• Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications

  Firefox continues to run even after the release in Manager Windows tasks and has about as much memory to affect other applications. Firefox.exe must be completed manually in Windows Task Manager. Is there a software patch that will force the release of memory and all the resources of the computer that was using Firefox, when it is finished?

  This has happened

  A few times a week

  == I see only the program in the Manager of tasks over the past months but the problem could took place for more

  See this:
  https://support.Mozilla.com/en-us/KB/Firefox+hangs#Hang_at_exit

• Shut down the PC after the release of the labview application.

  Dear friends,

  I want to make application in labview so that... when somebody will start PC this labview application should run. and PC shouldn't be able to do any other task instead of running the labview application. and PC should get the stop after the release of the application in labview. Please tell me how to do this.

  Kind regards

  Vijtin

  I think you're able to rebuild on a photo (I can't record to 7.0). If this isn't the case you take a Labview courses such as 'introduction to the introduction to the Labview programmers' and if you see in my first post to you, you will find the description of the shutdown command.

  

• the sidebar has disappeared after the release of firefox 5.0-6

  I've been using the extension all-in-one sidebar, he worked until FF5.0. But after the 6.0 update today, I can't even see the ability to turn on a sidebar, either all-in-one or just out of the box canceled one. That's happened?

  Firefox 6.0 is a pre-release beta version, not due to be released for another 3 weeks.

  https://addons.Mozilla.org/en-us/Firefox/addon/all-in-one-sidebar/
  
  See the bottom of this page - Version 0.7.14 19 June 2011 449,5 KB - works with: Firefox 4.0 - 6.0a2

  It has not been moved for 6.0b2 compatibility yet. Install and use this extension to force compatibility.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  Then see how it works in 6.0. It may be a good reason that compatibility has not yet moved to 6. 0b, the developer can have some fixing to do.

• Redraw the images after the rotation of the device

  Hi, all)

  I need redesign my interphace after the rotation of the device...

  I have a method in myScreen,

  public LoginScreen()
  {
  scaleKoof = Display.getWidth () / 320.0f;
  Create the interface elements

  }

  If I coluld call it after rotating all might be good! How can I do?

  scaleRotation - all images are resized to my interpace...

  replace sublayout and check the dimensions, it is called after a rotation.

• Problems with the image after the rotation of the

  Hello world

  I'm turning my .png image using the ImageManipulator library. Current rotation works fine, BUT - my image with alpha background is rendered on a gray square instead of alpha channel. What should I do with my image? How to preserve this alpha channel after rotation?

  OK, finally I managed to solve it. For those who are facing the same bugs with alpha channel by using ImageManipulator, you must change the method ' private Sub paintTransformedBitmap (Graphics g, int textureOriginX, int textureOriginY)

  private void paintTransformedBitmap(Graphics g, int textureOriginX, int textureOriginY) {
          // Make the drawing space transparent first before painting
          g.setGlobalAlpha(getBackgroundAlpha());
          g.setBackgroundColor(getBackgroundColor());
          g.clear();
          g.setGlobalAlpha(255);
          /**
           * Keep the precision of our transformation and Scale the drawing as
           * well. Scale is applied as though a matrix of the form
           *
           * 
           * | ScaleX  0     0|
           * | 0    ScaleY   0|
           * | 0       0     1|
           * 
  * is multiplied by the Transformation matrix * / dux int = Fixed32.div (transformMatrix [UX], resultantScaleX);
          DVX int = Fixed32.div (transformMatrix [VX], resultantScaleY);
          Duy int = Fixed32.div (transformMatrix [UY], resultantScaleX);
          dvy int = Fixed32.div (transformMatrix [VY], resultantScaleY);
  
      Necessary for alpha changes with Graphics.Clear 6.0 / / g.setColor (Graphics.WHITE);
      g.drawFilledPath (bitmapXPts, bitmapYPts, null, null);
  
          g.drawTexturedPath (bitmapXPts, bitmapYPts, null, null, textureOriginX, textureOriginY, dux, dvx, duy, dvy, bitmap);
      }
  Notice the end of the method - setColor and drawFilledPath now commented and image appears.
  		   

• After the release of love drive [iOS]

  After the update of adobe reader when I send a pdf file to the flattened format removes the part of the document. It's going to be an update for this problem?

  Neil

  Hi Neil,

  I have examined similar issues flattening and discovered a flaw in Acrobat Reader for iOS.  I filed a bug report for the defect corrected in a future release.

  Could you pass a glance to my #4 reply in the following thread a workaround in the meantime?

  Re: Cannot save a PDF to fill by using Acrobat Reader for iOS

  Sorry for the inconvenience.

• create a theme of the image (after the site update)

  Hello

  How to create a theme of the image, in the new kuler window (after update of the site) then I want to know if I want to delete a comment in my theme, there is not any method to delete a comment in a Kuler.

  can someone help me...

  Thank you.
  

  Thanks for the Homeless of entry.  There are many features Kuler users have requested.  The function 'delete comment' is a good idea.  However, the main focus finalizes now the function 'create image '.

• Can we call a method before and after the operations of export in ADF 11 g

  Hello
  My problem is that I have to run a method before and after the export operation. Is this posible in ADF 11 g
  
  Kind regards
  Felix

  Hello

  in response to a post of similatr of yours, I said

  1 drop af:exportCollectionActionListener on a command button
  2. set the control knob to display = false
  3. in your Java code, call

  ActionEvent ae = new ActionEvent (button);
  AE.queue ();

  Everything you put in front

  ActionEvent ae = new ActionEvent (button);
  AE.queue ();

  will be like a before trigger fires, everything that follows as a trigger of post

  Frank

• Firefox 36.0.4 does not go to the internet after the release of sleep

  My FF won't go to the internet after the resumption of sleep in specific situations to my use of power cord. I have Windows 7 on my laptop. I'm using FireFox 36.0.4. I searched the problem and found a person of 2013 with exactly the problem and I can reproduce my problem the exact way of sames like this person mentioned in their support of Mozilla question. Unfortunately, there is no effective solution to this problem. My FF fails to answer some specific situations:

  It seems to be when I have my laptop plugged in while using FF. If I close the lid to put to sleep, when I reopen the lid it later, that it does not connect to any websites. I can click on things on the page, so it is not completely frozen. I can search on google, but it never connects to a page. It has circular availability icon and 'connection '. It is not stop search or give an error message. I have to close off FF and completely shut down my computer and restart to clear the problem. If I try just close Mozilla and again I get an error message "already underway but enforcement does not." the old process of FF must be closed before opening a new window", but I do not have an open window and regardless of how many times I close and try to reopen, I get this message even; If I don't have the power supply cord is plugged in, I don't think not that I have this problem.

  I met the same problem, but it happens on a desktop running windows 7 and not another desktop running windows 7 so I think that there is another question. I can sometimes get around simply refresh the page he fell asleep on with the arrow curved in the address bar but would like to permanent an easy solution.

• After the release of sleep I get a message saying: "your computer is currently locked" after 30 seconds.

  original title: disorders to restart the PC after the mode "Eve"

  I have a laptop with Windows Vista Home Premium installed. I feel in pretty serious trouble when I try to turn on the PC again after putting in mode 'sleep' (or after it is disabled due to low battery). The sequence of events following the bifurcation is as follows:

  1. I turn the PC back on.
  2. a message appears on the screen after about 30 seconds saying 'your computer is currently locked' and there nothing else do.
  3. impossible to do anything else, I force close to the PC.
  4. I turn it back on and start the PC in "safe" as mode indicated in the display.
  5. when the process is complete, I complete the secure mode by turning off the PC.
  6. I turn the PC back on. It asks me to enter the password, and the rest comes on as it should.

  So I can go back to normal after this 6-step process is completed, which is quite annoying and refused to Office 2007 as scary because even this process did not work last week that my PC has become impossible to connect to the wireless network at home, at work, etc and I was able to use my PC again only after a system recovery which was a nice surprise for me.

  Any help would be much appreciated.
  Kind regards
  Bekaroglu Bulend

  Dear James,

  Thank you for that comprehensive answer. I apologize for my answer, that I was busy with other things and forgot this issue for now. First of all, 1Utilisez mode"still works and that's how I'm going to return to normal operation again. It does not eliminate the problem, however. I have not yet tried the methods mentioned by you. However, I did something else as follows:
  1. I removed the password from my account (I am the administrator)
  2. I left my laptop to turn off because of low battery
  3. I restarted the laptop

  And I managed to find a normal operation. I intend to use my laptop without password, I don't want to face the same problem again. (I guess that the problem will resurface if I started using a password again.)

  In both instances separated last week, I noticed also that my computer started a validation file of three steps and the process of compacting the files immediately after I put on. They went well. I'm not sure, however, they were of no help to solve the problem. My feeling is that they were not.

  Thanks again for your time.

  Kind regards
  Bekaroglu Bulend
  Istanbul, Turkey