Alert for the ability of logical space available for guests.

Similar Questions

• Alert for comments file system disk space (without turning on all of the alerts capability)

  Hello

  Is anyone know how you can activate alerts for comments (i.e. individual symptoms) file system free space without activating capacity alerts? Alerts from the ability to create a lot of noise. VRealize operations 6.1

  Thank you

  John

  Go to the content--> Notifications and create a new notification.  Set the type of object to the Virtual Machine and the Notfication trigger in the alert definition, then tap the alert that you want to be notified on.  You can select any or all levels of criticality, and possibly under Advanced, you can choose any or all States of alert and statutes.

  

• to know the amount of free space in a tablespace

  Hello
  
  I'm learning to oracle 9i release 9.2.0.1.0. I had created a tablespace 'TOOLS' to use the default tablespace for Statspack.
  I would like to know the amount of free space available in this table space. To do this, I ran the following query, but there was no selected lines:-
  
  SQL > select tablespace_name, bytes from dba_free_space
  2 where nom_tablespace = 'TOOLS. '
  
  no selected line
  
  SQL > select name from v$ tablespace;
  
  NAME
  ------------------------------
  CWMLITE
  DRSYS
  EXAMPLE OF
  INDX
  ODM
  SYSTEM
  TOOLS
  UNDOTBS1
  USERS
  XDB
  TEMP
  
  Can someone say the reason for this.

  Strange that the difference of 0.625 MB does not appear in free_space...
  But anyway, this tablespace is good as COMPLETE.

• vRealize Operation Manager 6.0 - Snooze alert for host in maintenance

  Hello

  I was wondering if somebody encounter this situation or have a solution for this. In the previous version of vCOPS by default when a host was in interview he disappeared from vCops and does not generate any alerts. With the new version, this behavior is no longer present. Since we are currently plug our hosts, we get a bunch of alerts for guests who do not have loads of work on them.

  If anyone has a way for us to get this functionality, let me know! Looking into this at the same time.

  Thank you!

  Finally I ended up adding a definition of the symptom in the alert

  Where this can be useful for someone else

  Alert definition: host has lost the connection to vCenter Server

  Creates a new definition of the symptom

  Type = property

  Name = host State not in maintenance

  Length of ownership. State of maintenance. = inMaintenance

  The alert now as two conditions and for the moment, in my test environment, that it does not work as expected.

• exclude alerts for DVD players on the rules available to the logical disk space

  Hello

  I created a new rule to monitor space available in megabytes using the topology of logical disk for my windows Hosts. The rule is also trigger alerts for CD/DVD players. I need exclusion has go them of monitoring/alert. Please guide if you have an idea of how it can be ruled out starting / ignored.

  Query scope I use: LogicalDisk: host.agents.type {'Active Directory', 'ExchangeAgent', 'WindowsAgent'} with the spaceAvailable property. Alert reader DVD are ignored if I use the property capacityavailable of logical disk. But it shows the free space available in % I need.

  Return to Administration-> tooling-> Console of Script and paste the following text in the search box:

  Logical disk: (host.agents.type {'Active Directory', 'ExchangeAgent', 'WindowsAgent'}) and (detail.writable! = false)

  "Do the motion" SELECT and let us know if this succeeds.

  (It worked for me)

• Want a graphic 'Filesystem space available' for the last 31 days, 7 days and 24 hours on 24

  Using control of cloud EM 12.1.0.4.0.

  For a given host, we are able to get the desired cards as (host > surveillance > CPU detail), which gives us the use of the GPU, CPU etc. load graph. For these cards see you current, last 24 hours, last 7 days and 31 days.

  We need similar graphic for "Filesystem space available (MB or free %)" or the disc.

  I can see the data is present in MS for example (Home > surveillance > the metric), under there are file systems:

  - File system space available (%)

  - Space of available filesystem (MB)

  - File size (MB) system

  
  

  But these data are in table form.

  and you can pass the data for these positions... BUT I need to have table smilar to chariot of CPU load with the files above, system information

  Please help with steps, or direct me to documentation.

  Thanks a lot for any input.

  On the page where you see the metric data in a table, select a row (for example a mount point) and you should see the table of the metric for that point inside mounting.

  Below a screenshot shows the graph for a mount point.

  

  Kind regards

  -Loc

• EAC Package created with the ability to update. However, when an update to a CC for 2014 is available, it requires only an Adobe ID connected with the deployment of the company? This is how it is supposed to work?

  I created a company package CC with the ability for an administrator to perform updates. However, when an update is available for a CC 2014 application, an Adobe ID is asked to download and install the update and the Adobe ID must have the correct rights and permissions to perform the download if it means that it must be an account with our company related to the CC Adobe license?

  I studied and the way it looks, it's another package will have to be downloaded to get CC 2014 applications. The undesirable method would be to share the Adobe ID or plug the Adobe ID and do the installation myself (the Adobe ID that our institution is connected to our Creative Enterprise Cloud license which we give out). I agree this isn't the ideal method, especially for the company, the Mac Admin had just completed an installation of 80 iMac of the old package last month. You hope that the Adobe engineers would come up with something better.

• No logic switches available to add to the logical router

  I did something that was pretty stupid as always in my lab.  I had 3 logical switches that were assigned to an area of global transport that was attached to all 3 of my bunches.  I decided that I wanted all the logical switches attached to all clusters, so I deleted the form of Exchange clusters.  Bad idea!  Other that an alert on the logical switches, everything seemed ok.  I then decided to create areas of transport for each individual cluster and configure the environment in the right way instead of ugly alerts.

  I created 3 additional transport areas, 1 for each of my cluster and everything looked good.  Then, I created a logical switch and attached to the box for one of my bunches.  However when I try to attach it to my logical router it shows not available.  I even tried to create a router of additional logic and no dice.  If I create a logical network and attach it to my area near global, it turns out very well.

  No idea what I do wrong?

  It was a problem of pedcak on my part.  I didn't not deploy logical routers to disparate groups so there's no Tin area of transport suitable for logical switches to connect to.  OPPS.

• Why the space available on the iPhone never match iTunes report?

  Long-standing oddity, not terribly urgent, but as I hit my phone memory limits recently, something I I want to better understand:

  Storage looking on my iPhone under settings > general > use storage & iCloud, I see a number that does not match the free space listed in iTunes while my cable clocks-"space" available in the graphic bar at the bottom of the page under iPhone iTunes > summary is always different.

  For example, at the present time this 32 GB iPhone 5 shows the settings > general > storage & use iCloud > available 2.5 GB

  and iTunes iPhone 5 s > summary > 3.49 GB free

  Which is more accurate, and why these numbers differ so constantly?

  There are a number of reasons, including how each system filesystem view (s) - are addressed in these discussions

  iTunes and iOS report storage differently - CSA

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• After that I deleted my pictures for free space, it still shows in circles that there is no space available. What should I do? Can anyone help?

  I have an iPhone 16 GB, 6, and recently I received notifications that I have low storage. I deleted more than 400 pictures for free space and when I return to my settings it shows that I have no space available. I don't know what to do and it's really frustrading.

  Just to be safe, you deleted the content of the album "recently deleted" inside the photo app?

  If Yes, have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by doing this, but it can cure a few glitches.

  If still no luck, set it back to factory settings and restore from last backup:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Connect to iTunes and check the status bar to see which section is the largest?

• I've lost the ability to see wireless connections that are available or contact them.

  for some reason, I lost the ability to see the available wireless connections or communicate with them.  We have installed a new modem/router with WiFi and I do not see our network OR any others in the region.  How to bring back this ability?

  original title: WiFi HELP!

  Do you see a logo anywere wlan on your cpu (the logo must be under this text). If so turn on it could be like a touchscreen or there could be a switch. If there is a light on the switch or assimilated to the switch, it should be (in most cases) blue.

  

• Windows Movie Maker 6.0 error during recording: check if the original sources are still available, the saving location is available and if there is enough disk space

  Original title: Windows Movie Maker 6.0 Save Bug?

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  Something's weird with Windows Movie Maker...

  It cannot record movies, I create somehow.

  Immediamente when it starts to save, it gives an error signal: check if the original sources are always available (and yet, they all), there is no such thing as the save location (of course it is!) and if there is enough disk space (a lot of). Still, it will not save. How can this be possible?

  I use an mp3 file (pendulum - watercolor) and have a lot of footage, often used with effects. They are 1280 x 1024 and a .avi file. Everything should work fine, but still does not work. Help me!

  ============================
  It is sometimes possible to publish / save in the
  Even if the DV - AVI format. WMV fails. If you are
  running Vista Movie Maker 6.see the following:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  WIndows Vista Movie Maker 6
  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  And sometimes unchecking that will enable all filters
  registration in progress...

  Reach... Tools / Options / compatibility... tab and
  Uncheck all filters / OK.

  The error that you received can be caused by the following:

  (1) source incompatible or damaged files (photos,
  video clips, audio clips).

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too big or too complex for your system
  resources. Made video is time CPU and
  can sometimes cause blackouts.

  The following items may be worth a visit:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• "The video file cannot be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again"when trying to publish a movie

  Original title: VISTA HOME BASIC MOVIE MAKER

  Hello

  I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not.  Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?

  Hello

  I wanted to connect to music and it would be pretty easy to do using this program to create and then publish and convert audio to mp3 using another program, I have, but not.  Everytime I try to publish it he says its impossible and to veryify the publishing location is still available, check it there enough space and to try once again, I have and it still does not, have any ideas people?

  ===================================
  I suspect that the problem is the format of the music files.
  If you can convert them. Before you import into WMA
  Movie Maker, you may be able to publish.

  Format Factory free software can convert. MP3 files
  WMA... and can also join MP3 files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.