ALFA AWUS036H range adapter

Similar Questions

• ALFA AWUS036H USB adapter referee

  I have a Compaq Presario SR5610F with improved power (Antek 500 watt) and Vista 32 bit.  I bought an ALFA 802.11 b/g usb network adapter that is based on chipset Realtek RTL8187L.

  That is the problem.  When I plug the adapter into the USB port (any) and load the drivers, the adapter only cycles on and outside.  Which means it appears and disappears on the computer continuously at a rate of about once per second.  If Device Manager is open, it appears and disappears under network adapters.  I tried all the drivers I can find... same result.  I even let windows choose the driver from Windows update... even.  I did a restore of the entire system (using another hard drive) back to the State nine factory... made no difference.  Tried another card, did the same thing.  Is there some kind of incompatibility with the presario and 8187 chipset?

  ImaginaryKaos wrote: I could understand if one of these maps to this problem, but three of them?  Three different cards the same when plugged into a USB ports reacted.  The constant cycling on and outside.  Could they just draw too much current from the port?  They are supposed to be rated at 500ma (different from 1000mw), but who knows?

  I saw a review on this device and they knew the same problem you seem to be.

  "The Realtek RTL8187 Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter has malfunctioned and exceeded the power limits of its hub port. You should disconnect the device. »
  
  I bypassed this problem by buying a hub usb powered from best buy.

  Just a thought

• ALFA AWUS036H need driver for Win7 Ultimate 64 bit... s ' Please help.

  I need ALFA AWUS036H driver for Win7 Ultimate 64 bit...

  Waiting for answer

  Oualid Kurdy

  Solved...

  I find new driver at the following link...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PFID=1&level=6&Conn=5&ProdID=36&DownTypeID=3&GETDOWN=false&downloads=true

  Oualid Kurdy

• My alfa wireless usb adapter does not work and I have no internet connection. How can I solve this problem?

  Dr., Sir, I can't fix my wireless adapter usb [ALFA] Please help me how to fix this, your faithfull, Mr Hameed.

  Hello

  ·        Which is exactly the problem that you are facing with USB adapter?

  ·        You are able to go online?

  ·        Is it detected?

  ·        What operating system is installed on your computer?

  Method 1: Run the network troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: Follow the suggestions from the link and check if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Solve Wired and wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4: you can also reset the USB controller and check if it makes a difference:

  a. type devmgmt.msc in the start search box.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer and reinstall the USB controllers.

  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

• Installation of a long range internet adapter Alfa

  I have a desktop computer HP Pavilion Elite Quad Core with 8 GB RAM, etc, etc... It is very nice.  I just moved to an area where the built-in adapter is not strong enough to pull in the wireless signal, so I bought an Alfa long range adapter that works perfectly.  While I have the correct configuration, I just need to know if I need to disable or uninstall the internal wireless network adapter if it comes into conflict with the new long range adapter, or will they play nice and automatically default to the new card?  Currently when I open network connections, I see a Local Connection 2 (network cable disconnected) network, A Wireless Network Connection 3 (he is my long range adapter Alfa (RTL8187), A Wireless Network Connection 4 (Wireless PCI Card (not logged in - I guess that's my built-in adapter) and a network 5 wireless connection (Microsoft Virtual MiniPort).))  I now have a wireless connection, but I assure you once for all that what I see is what I should see and no conflicts that can slow down my connection.  Help?

  There is no need to uninstall or disable the radio factory, if there are no networks in range. However, just to be safe, you can disable it in Windows Device Manager.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Why don't unlock the lock screen?

  I know this is a long post, but I would be very happy if anyone with time on their hands to read.

  My computer works well and has had no virus since I installed windows8 (a few months ago), but today, he worked, and I rebooted, then the keyboard and mouse would not unlock the screen no matter what I do! Normally, when I click or press a key, the screen will slide up and he asked me my password, but now, it won't work.

  I tried different mouse and keyboards and all confirmed working on different machines. My work of mouse and keyboard in my bios and windows 8 s shift f8 mode. I tried different ports. I tried to unplug all USB ports and then plug on the lockscreen. I managed mode shift f8 and tried several options. Safe mode produces the same result. I tried to system restore but it gives me an error report something to do with my antivirus avira. After a Google search I found avira secure systems can't do system restored until avira is uninstalled, which I just can't do it right now.

  While in the lockscreen, I have several signs that the system is not completely frozen. The changes of time. When I unplug my USB WiFi adapter, the icon changes to WiFi and it changes back when I plug it back in. Initially, my keyboard volume knob does nothing but after spamming all the buttons, turn the volume change the volume, as indicated by the meter of volume of windows 8.

  Please help, I need to use my computer! I would prefer not to have to restore it because I don't want to lose a 2 TB of HDD to a value of things. I either need to find a way to uninstall avira has no access to windows and you try and the restoration of the system, or find a solution to the question itself.

  I tried to follow an online guide on how to uninstall programs with cmd, but it failed. I typed in wmic and that the command was successful, the next step was to type in product of is name, but who gave me an error code and it said invalid class. After some research, I discovered that x 64 systems do not come with preinstalled WMI command-line, but I can't install it without access to windows.

  Data sheet:

  Windows 8 x 64 professional
  12 GB Kingston hyperx 1600 MHz ram
  Stock of amd phenom ii x 6 1050t 2.8 GHz cpu
  And gigabyte 6850 GPUs
  ASUS m4a89gtd pro/usb3
  Microsoft sidewinder keyboard
  Logitech m500 mouse
  Alfa awus036h wireless adapter

  Thanks in advance.

  Edit: PS in safe mode, the lock screen is a reason ignored. He starts the password entry screen but the mouse is nowhere to be seen and the keyboard does nothing. The thing hits line of flashes.

  I would like to do a refresh of the system but need an installation disc and I've never had a physical disk, I downloaded an upgrade for windows 7.

  If you get to the real computer login screen, then you have a different problem that speaks of cheezstik .

  For your particular case, if you can not connect, here are your options: cmdrkeene.com/reset-windows-password forgotten

  PS. the icon with the Red Cross means that you are not connected to a WiFi now.  It's nothing to worry and normal.

• AWUS036H does weird things when it is connected to a USB port.

  I have a network card 802.11 g Alfa AWUS036H, the chipset Realtek RTL8187L.  I installed the latest drivers.  When I plug this device into my USB port, the computer recognizes the device without problem.  However, the system starts turn off and turn the card over and over again.  A constant cycling of on and off.  If I open the Device Manager, the USB device keeps appearing and disappearing to the constantly.  He never stops until the unit is unplugged from the USB port.  Needless to say, any kind of network connection is impossible.  Now, I also have an Atheros USB adapter, but it doesn't have the same problem.  I can use it to connect without any problem at all. I also have another NIC Alfa, based on the RALink (802.11n) chipset, and it does exactly the same thing, like the Hawking adapter, on the RALink chip based.    all proposals/solutions?

  All I ask you to do is to re - install the USB drivers

  1. the Device Manager open.

  2. expand Bus USB controllers.

  3. right click on each component and choose uninstall.

  4 restart the computer and windows will install the Inbox for the USB drivers.

  5. now check if everything is working properly.

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• connection problem G-mode network show limited

  I use the alfa AWUS036H wireless card there are two types of network available (G & N, G) mode I could connect only N, G. G-mode network mode network show limited.

  Hello

  Try the steps mentioned in the article below, which deals with a similar question.

  You receive a message "Limited or no connectivity" on a computer that is connected to the Internet by a DSL modem or a modem cable after installing Windows XP.

  http://support.Microsoft.com/kb/892896

  Hope this information is useful.

• ADAPTER DOUBLE BAND ONLY SHOW THE 2 GHZ RANGE, HAVE LOST 5 GHZ BUT PRESENT ON ALL OTHER PCS

  I inadvertently "REMOVED" the recognition of 'network' of 5 ghz on a menu that allowed me to "remove unnecessary networks."  I thought I was doing the right thing, but deleted by mistake the 5 ghz. Now I just can't side 5 ghz of the card to show as an available network when I click available networks at the bottom right of my screen.

  My dual band router LInksys is certainly put 2 and 5 ghz because I can see them on other PCs in the House and my Iphone6. It's only the HP All In One which now lacks the recognition of 5 ghz.

  It was working fine before my despicable act. I could easily switch between 2 ghz or 5 ghz...

  I rebooted router and reset I can see the 'admin' menu for the router on this computer.  I restarted my HP. I tried to restore my pc soon, and no effect. It seems that somehow I just simply deleted a vital statement or turned a vital switch that prevent this receiver WiFi HP-receive adapter or by switching to the 5 ghz range and the value by default only the 2 ghz.

  My system details also show that it is a working adapter RALink 3290 80211 bgn

  Is there a way to turn this back on? How do I re - establish the 5 ghz network on this HP?

  Any help out there?

  George P

  You are the very welcome.

  That is right.  No 'a' doesn't = No 5 GHz.

  I can't explain why you thought you saw other 5 GHz networks on your PC.

  The only wireless networks that should be visible on your PC are only in the 2.4 GHz band, because it's all Ralink card in your model can see.

  You might be able to replace the card with a wireless card dual band but I can't say for sure.  Some PC have a BIOS lock that prevents users from installing a different wireless card.

  You would have to make sure your PC has two antennas connected to the current Ralink wireless card because all dual-band cards have at least two terminals of the antenna to connect to.

  I would say the best thing you can do would be to go to your local office supply store and pick up a wireless network adapter dual band USB external.

  They now power USB wireless adapters, so you can get one of these.

  You wouldn't have any compatibility or hardware issues with an external USB card and not worry about BIOS locks or the number of antennas inside your PC.

• How to activate the range high voltage E364Xa power adapter

  I use E364Xa power supplier code example downloaded with the driver E364Xa the Web site of NOR. I need the output in the range of high voltage voltage. Please see attachment tha. But the example code has been an error when the output voltage is greater than the range of low voltage. The default setting for the equipment is low voltage range. Does anyone know how to activate the range high voltage before you configure the output voltage?

  Problem solved. I found the order of output range VI.

• Currently, I am running Windows 7 but to install a range more network adapter Linksys which is only compatible with Windows XP. Can I use the compatibility mode and install through XP?

  You can understand that I want to change my office from Wired to Wireless and really to have the adapter installed in the back of my Office Wireless (with dual band antennas).  The Linksys device is not yet recognized because I'm running Windows 7 while trying to install the drivers which are only Windows XP and previous versions. Is it possible to USE the Windows 7 compatibility mode > XP and still have a stable system when I'm not using the adapter. ?  Really appreciate the help of someone who can advise me.

  Thank you all very much,

  Roger Willis

  Calimesa, CA.

  Hi Roger

  The Compatibility Mode works with hardware or software drivers. This mode is less reliable when installing the hardware drivers that it is during the installation of software.

  If Compatibility Mode fails, your only option would be to check with the support of Linksys.

  Linksys support:

  http://support.Linksys.com/en-us/support

  Concerning

• I get my internet through a Repeater.  There is a POE carrier then online, then a router adapter yet.   Can I use an Airport Extreme with POE to improve my WiFi range?

  I live in Baja California Surinamese no cable.  You want to improve WiFi.  Not sure how to interact with a POE.  Tried to set up the airport without a bit of luck.  Appreciate some feedback.

  If the connection between the POE (Power over Ethernet) device and the AirPort Extreme is a wireless, then you will not be able to extend the network Wi - Fi of the OCB in the extreme. This is possible with an another AirPort base station.

  In addition, only a particular model of the base station AirPort Extreme POE supported wired connections. It was discontinued in 2007 and is model # A1034.

• Fill a wireless adapter

  I'm trying to configure a VM snort in 3 Player to watch wireless networks.

  My configuration:

  Host: Win 7 Pro x 64

  Comments: Ubuntu 9.05

  I filled eth0 and eth0 started with listening like this:

  Auto eth1

  iface eth1 inet manual

  up ifconfig eth1 upward

  When I connect to a wireless network, I launching

  #tcpdump-i eth0

  in an effort to see that the bridge correctly captures the data.  All I can capture is broadcast traffic.  This doesn't make much sense.  I'm deliberately generate traffic wireless access point to get things to capture.  I don't know if it's a matter of Linux, Win 7 x 64 issue, a problem of VMWare Player or a wireless driver problem.

  Any ideas or suggestions?  I do not know what data I provide for assistance.  Thanks in advance.

  Matt

  I use the "Alfa Network AWUS036H USB Highpower WLAN Adapter 2.0"

  with a virtual of Backtrack machine.

  This device may be illegal in some countries, as it is so powerful ;-)

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Monitors flicker and "Input Signal Out of Range"

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  After research, I tried to start safe mode, but the problem persists.

  I read that put the computer to sleep and then wake up could solve this problem... it worked a

  couple of times, but the issue soon returned.

  I tried to reset several times VRAM/LANDAU and SMC.

  I doubled checked all the connections.

  Under the system of preferences > display (when the image is stable long enough for me to see) everything looks OK. Under the screen of the 'Default display' tab is selected. On the color tab, there are three HP2071d listed (with a selected) in the window display profiles. I've linked by selecting one of the other "HP2071d" listed without noticeable change.

  I also reset both monitors to factory settings via the menu screen of the monitors.

  I also came across this mini Mac EFI Firmware Update 1.7 for flickering on end of 2012 Mac Minis, but when I tried to run I got "this software don't is not supported on your system. Ugh. It turns out that my Mac Mini is already updated to MM61.0106.B0A (2015-002)

  My Information System > Hardware > graphics/display info is:

  Graphics Intel HD 4000:

  Chipset model: Intel HD Graphics 4000

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0 x 0166

  Revision ID: 0 x 0009

  Exhibition:

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3171PFF

  Mirror: on

  State of the mirror: mirror material

  Online: Yes

  Rotation: support

  HP W2071d:

  Resolution: 1600 x 900 at 60 Hz

  Per pixel: 32-bit color (ARGB8888)

  Display serial number: 6CM3170P31

  Main screen: Yes

  Mirror: on

  State of the mirror: mirror of Master

  Online: Yes

  Rotation: support

  I am of the ideas of what else to check/try.

  Thanks for any assistance that anyone can provide.

  bdcs64 wrote:

  Hello!

  I have a Mac Mini (end 2012) 2.3 GHz Intel core i7 running up-to-date El Capitan, with two HP monitors 2071d.

  These monitors have DVI connections. It is connected with Mini DisplayPort to DVI adapter, and the other with HDMI to DVI adapter (provided with the Mac Mini).

  Quite the same configuration except here, with 2 Samsung S22B310 DVI monitors on an i5 2.5 GHz in late 2012.

  Everything has been fine for a year until this week. Two monitors are:

  (1) intermitantly began flickering of the scrambled images

  (2) flickering intermittently at black or white noise

  (3) intermittently flickering white noise

  (4) the message of the form 'input out of range Signal. 1600 x 900 at 60 Hz settings."

  How is this problem go and come, but rather continues today.

  Both monitors isn't good. Which would lead us to think that the Intel HD 4000 is overheating and the problem is not with any of the adapters or cables. Although, if one of the cards was not internally, it could put additional heat stress on the graphics chip.

  Personally, I will try a few things.

  1. turn off, unplug everything, open the bottom cover and give it a good cleaning to make sure it cools properly.

  https://www.iFixit.com/device/Mac_Mini_Late_2012

  2. try each monitor individually for awhile configurations see if the problem follows the monitor cable adapter installation.

  (I know he'll be a brake after obtaining used monitors to double)

  3. try using > MacFanControl to monitor and help control the temperature of the GPU ITPP.

  http://www.CrystalIDEA.com/Macs-fan-control

  FWIW, I do not use screensavers, but I do a lot of videos as well as some games of light on both my 2010 and 2012 of the Mini and I really believe that MacFanControl has really helped to extend the life of graphics on these two systems.

  I use the control based on the sensors on the sensor of GPU ITPP and configured so that it starts slowly rise in power of the fan above 129' F