Align the drop cap at the bottom of the paragraph

Similar Questions

• How do underline you a drop cap so that the text following around her wrapping?

  I found a PDF Online where the designer has used large drop caps on a number of occasions that are highlighted.

  Obviously this is not technically difficult, I can add an underline in the character Panel, but underscore appears above the line of text below.

  In the case of the original example, not only the line of text below appears as underscore on the drop cap, the adjacent text to the right of the drop cap is perfectly aligned with the bottom of the letter drop IMP and the underscore, as if everything is settled on the baseline. How is - this made both acurately?

  

  Try you object anchor

  

• Space between the text and the drop cap

  Hello

  Hope you are well.

  In the picture as an attachment (a screen shot from an InDesign document), I would create more space between the drop cap L and the text to the right.

  How do I do that?

  Thank you!

  

  Likewise, you must define the difference between any pair of characters - with kerning!

  

  

• Matter of style re: color of the drop cap, the rest of the text in black

  Hello... I'm trying to achieve this result by using character paragraph styles / nested:

  

  Instead, that's what I mean:

  

  I have a paragraph with a nested character style style. The paragraph style specifies the point of using a drop cap with 4 lines. The nested character style tells the paragraph to the first three words in a special font and some red CMYK color. But I can't understand how to tell the style also put the drop cap in the same color. Help!

  Thank you.

  the character of the dropcap style there red color value itself?

  PARK style of paragraph for a moment, go to the style of CHARACTERS assigned to the dropcap letter and look at the options. Look at the color of the text and see if it is red or not.

  Does that help?

• Drop cap in the first paragraph only...

  Hi all

  I found what looks like the solution to this, but it does not work (making it not a solution).

  in any case, I've created two paragraph styles ('First paragraph Style' and 'Paragraph Style'). "First paragraph Style" I put the drop cap, and I put "Next Style" (under 'general') 'Paragraph Style' (who has not a setting of the drop cap, or rather the settings by default ie. 0 rows, etc.).

  The catch: I apply the paragraph Style first to my text and... all paragraphs will have a drop cap, as defined in the first paragraph Style. Major sadness!

  Any ideas?

  Thank you very much!

  -steve

  You must right click on the first paragraph Style and then choose apply "paragraph Style" then next Style.

• How can I get my index generated to properly align the bottom margin?

  I did the index before and had no problems.  This time, it will not go to the bottom margin or will go underneath.  The page numbers for the last topic in the back (with 2 or 3 empty lines above the bottom margin) appear at the top of the next column.

  I still don't know what was wrong.  I played a little of the paragraph palette and the index works properly!   Thank you very much for your help!

• Align the text of the varchar2 column data

  Hello
  
  It is in reference below thread:
  Re: Align the text of varchar2
  
  I think I should post my question in this forum, rather than General database,
  
  I created a table and inserted the same that in the thread that above, and when I said:
  Select ID, FILLED_TEXT(DESCRIPTION,30) FROM T;
  
  It does not show the data in the column as aligned in 30 word boundaries. I thought, that I would be able to resolve the issue with the help of the http://soft.buaa.edu.cn/oracle/bookshelf/Oreilly/prog2/ch11_02.htm link, but failed.
  
  Kindly help me more.
  
  Kind regards.

  Okay, so you're saying there is already a tags in the code to indicate where the line breaks are necessary, so a small adjustment of the data to include these tags and also the code...

  DROP TABLE test_data
  /
  CREATE TABLE test_data as
  select 1 as id, q'[For several days after leaving Nantucket, nothing above hatches was seen of Captain Ahab. The mates regularly relieved each other at the watches, and for aught that could be seen to the contrary, they seemed to be the only commanders of the ship; only they sometimes issued from the cabin with orders so sudden and peremptory, that after all it was plain they but commanded vicariously.<>Yes, their supreme lord and dictator was there, though hitherto unseen by any eyes not permitted to penetrate into the now sacred retreat of the cabin.]' as txt from dual union all
  select 2, q'[Every time I ascended to the deck from my watches below, I instantly gazed aft to mark if any strange face were visible; for my first vague disquietude touching the unknown captain, now in the seclusion of the sea, became almost a perturbation. This was strangely heightened at times by the ragged Elijah's diabolical incoherences uninvitedly recurring to me, with a subtle energy I could not have before conceived of. But poorly could I withstand them, much as in other moods I was almost ready to smile at the solemn whimsicalities of that outlandish prophet of the wharves.<> But whatever it was of apprehensiveness or uneasiness - to call it so - which I felt, yet whenever I came to look about me in the ship, it seemed against all warrantry to cherish such emotions. For though the harpooneers, with the great body of the crew, were a far more barbaric, heathenish, and motley set than any of the tame merchant-ship companies which my previous experiences had made me acquainted with, still I ascribed this - and rightly ascribed it - to the fierce uniqueness of the very nature of that wild Scandinavian vocation in which I had so abandonedly embarked. But it was especially the aspect of the three chief officers of the ship, the mates, which was most forcibly calculated to allay these colorless misgivings, and induce confidence and cheerfulness in every presentment of the voyage. Three better, more likely sea-officers and men, each in his own different way, could not readily be found, and they were every one of them Americans; a Nantucketer, a Vineyarder, a Cape man. Now, it being Christmas when the ship shot from out her harbor, for a space we had biting Polar weather, though all the time running away from it to the southward; and by every degree and minute of latitude which we sailed, gradually leaving that merciless winter, and all its intolerable weather behind us. It was one of those less lowering, but still grey and gloomy enough mornings of the transition, when with a fair wind the ship was rushing through the water with a vindictive sort of leaping and melancholy rapidity, that as I mounted to the deck at the call of the forenoon watch, so soon as I levelled my glance towards the taffrail, foreboding shivers ran over me. Reality outran apprehension; Captain Ahab stood upon his quarter-deck. End]' from dual
  /
  
  CREATE OR REPLACE FUNCTION wordwrap (p_txt IN VARCHAR2, p_linesize IN NUMBER) RETURN t_wordwrap_txt PIPELINED IS
    cursor cur_wordwrap(p_txt in varchar2) is
      select rn, txt
      from (
            select rownum as rn
                  ,trim(regexp_substr(p_txt,'.{1,'||p_linesize||'}( |$)',1,rownum)) as txt
            from dual
            connect by rownum <= ceil(length(p_txt)/p_linesize)+10
           )
      where txt is not null
      order by rn;
    v_txt varchar2(4000);
    v_length number := 0;
    v_paratxt varchar2(4000) := p_txt;
    v_paratxt_part varchar2(4000);
    v_pos number;
    v_srch varchar2(100) := '<>';
  begin
    loop
      exit when v_paratxt is null;
      v_pos := instr(v_paratxt,v_srch);
      v_paratxt_part := case when v_pos = 0 then v_paratxt else substr(v_paratxt,1,v_pos-1) end;
      v_paratxt := case when v_pos = 0 then null else trim(substr(v_paratxt,v_pos+length(v_srch))) end;
      for w in cur_wordwrap(v_paratxt_part)
      loop
        v_txt := w.txt;
        loop
          exit when length(v_txt) = p_linesize or instr(v_txt,' ') = 0;
          for i in 1..p_linesize-length(v_txt)
          loop
            v_txt := regexp_replace(v_txt,'([^ ]) ','\1  ',1,i);
          end loop;
        end loop;
        v_length := v_length + length(v_txt);
        if length(v_txt) > 0 then
          pipe row(v_txt);
        end if;
      end loop;
      if v_paratxt is not null then
        pipe row(''); -- new line before next part
      end if;
    end loop;
    return;
  end;
  /
  

  results...

  SQL> select test_data.id, x.column_value
    2  from test_data, table(wordwrap(test_data.txt,50)) x
    3  /
  
          ID COLUMN_VALUE
  ---------- ---------------------------------------------------
           1 For  several days after leaving Nantucket, nothing
           1 above  hatches was seen of Captain Ahab. The mates
           1 regularly  relieved each other at the watches, and
           1 for aught that could be seen to the contrary, they
           1 seemed to be the only commanders of the ship; only
           1 they  sometimes  issued from the cabin with orders
           1 so  sudden  and  peremptory, that after all it was
           1 plain     they    but    commanded    vicariously.
           1
           1 Yes,  their  supreme  lord and dictator was there,
           1 though  hitherto  unseen by any eyes not permitted
           1 to  penetrate  into  the now sacred retreat of the
           1 cabin.
           2 Every  time I ascended to the deck from my watches
           2 below,  I  instantly  gazed  aft  to  mark  if any
           2 strange  face  were  visible;  for  my first vague
           2 disquietude  touching  the unknown captain, now in
           2 the   seclusion   of  the  sea,  became  almost  a
           2 perturbation.  This  was  strangely  heightened at
           2 times    by   the   ragged   Elijah's   diabolical
           2 incoherences  uninvitedly  recurring to me, with a
           2 subtle  energy  I  could not have before conceived
           2 of.  But poorly could I withstand them, much as in
           2 other  moods  I  was  almost ready to smile at the
           2 solemn  whimsicalities  of that outlandish prophet
           2 of                   the                  wharves.
           2
           2 But   whatever   it  was  of  apprehensiveness  or
           2 uneasiness  -  to  call  it so - which I felt, yet
           2 whenever  I  came to look about me in the ship, it
           2 seemed  against  all  warrantry  to  cherish  such
           2 emotions.  For  though  the  harpooneers, with the
           2 great  body of the crew, were a far more barbaric,
           2 heathenish,  and  motley  set than any of the tame
           2 merchant-ship    companies   which   my   previous
           2 experiences  had  made me acquainted with, still I
           2 ascribed  this  - and rightly ascribed it - to the
           2 fierce  uniqueness of the very nature of that wild
           2 Scandinavian   vocation   in   which   I   had  so
           2 abandonedly  embarked.  But  it was especially the
           2 aspect  of  the  three chief officers of the ship,
           2 the  mates,  which was most forcibly calculated to
           2 allay   these  colorless  misgivings,  and  induce
           2 confidence  and  cheerfulness in every presentment
           2 of   the   voyage.   Three   better,  more  likely
           2 sea-officers  and  men,  each in his own different
           2 way,  could  not  readily  be found, and they were
           2 every  one  of  them  Americans;  a Nantucketer, a
           2 Vineyarder,  a  Cape  man. Now, it being Christmas
           2 when  the  ship  shot  from  out her harbor, for a
           2 space  we had biting Polar weather, though all the
           2 time running away from it to the southward; and by
           2 every  degree  and  minute  of  latitude  which we
           2 sailed,  gradually  leaving that merciless winter,
           2 and  all its intolerable weather behind us. It was
           2 one  of  those  less  lowering, but still grey and
           2 gloomy  enough  mornings  of  the transition, when
           2 with  a fair wind the ship was rushing through the
           2 water  with  a  vindictive  sort  of  leaping  and
           2 melancholy rapidity, that as I mounted to the deck
           2 at  the  call  of the forenoon watch, so soon as I
           2 levelled   my   glance   towards   the   taffrail,
           2 foreboding  shivers  ran  over  me. Reality outran
           2 apprehension;   Captain   Ahab   stood   upon  his
           2 quarter-deck.                                  End
  
  65 rows selected.
  
  SQL>
  

• align the cells with shared values

  3.6.1 the numbers

  I would like to compare two columns and align the cells, if they are equal. Ideally, I would like to include the adjacent cells in the second column in the alignment.

  Example:

  Run the formula (if possible) to format the following text:

  

  As follows:

  

  Hi cnickflight,

  Easy to do by transferring the data to another table.

  

  Table 1 contains the original data. I reduced the names of fruits to three letter codes to reduce type them, but this does not change the process.

  Column A of table 2 contains a formula that copies the existing data in column A of table 1 and insert null strings when there is no data in the table 1.

  The formula is entered in cell A2 and filled down.

  Table 2::A2: = IF (ROW () −1 > COUNTA (table 1::A),"', SHIFT (table 1::$A$1,ROW()−1,0))))

  Fill until the end of the column.

  Columns B and C contain a VLOOKUP formula. The formula is the same in the two columns, with the exception of the number indicating which column of the table, the returned value must come. The version of 'testing' of the formula in B2 is shown. When filled to the bottom, this formula should copy the names of fruits where they are both on the table 1, in the line that they appear in column A, and display a triangle of error in the lines where there is no name in column B to the one in the column (and in the rows where column A is empty). The error message for each of them should be "VLOOKUP couldn't find the requested value."

  Table 2::B2 (trial version): = VLOOKUP ($A, table 1: $b$ C, 1, FALSE)

  (FALSE appears in the formula as 'exact match' editor)

  If the behavior is as described, add IFERROR before VLOOKUP, and , "") after the closing parenthesis to match the 'final version'. " (See "why two versions? below.)

  2::B2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,1, FALSE),' ')

  2::C2 (final version) of the table: SIERREUR = (VLOOKUP ($A, table 1: $b$ C,2, FALSE),' ')

  Fill both until the end of their respective columns. Results should now be as shown above.

  Note: Why two versions?

  Function SIERREUR is ideal for use as a trap for the error, but it acts on all errors, not only the one you plan to trap. Best practice is to add to this trap only if you are sure that the formula generates other error messages that awaits you and using in this case we know VLOOKUP, who has been charged with finding an "exact match" will throw an error when it does. Function SIERREUR catches this error and puts a string anywhere in the cell, making it appear empty.

  Kind regards

  Barry

• I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Anyway is to align the document even if it requires me to crop or lose

  I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Is there anyway to align the document even if it requires me to crop or lose some on the edges?

  Hi brad.

  Yes. You can use the analysis tools to straighten and crop your document. Here is a link to a new tutorial. The key to activate the sliding options recovery is to choose the option of the camera Image in the drop to Enhance, and gives you tools to set the correct page for smoothing areas.

  fundamental https://helpx.adobe.com/Acrobat/How-to/scan-Paper-documents-Searchable-PDF.html?Set=Acroba--principes t - create a pdf file

  Donna.

• Shortcut to align the edges of l/r/C

  Hello!

  I try to find in the context menu, but I don't see the option to set keyboard shortcuts for aligning the edges, I try on google but only what I have find is for the typo, SHIFT + CTRL + R/L/C and works fine but I need for executives

  Does anyone have solution for my troubles

  TIA

  You will need to create a new shortcut set, Edition > keyboard shortcuts...

  You will find the alignment options of objects under editing the objects in the drop-down list of the product area.

  An alternative is to use a script to do the alignment, and then assign a shortcut to the script.

• align the balls next to the image...

  I have an image with text next to him, http://mac.ysu.edu/test/MAC/microsoftpage.html I want to know how to align the bullets in the text, when I put the ball, puts it at the bottom of the image to the left, its where the other balls are just below that the text pretty much as low as the image is.  any help would be appreciated

  Hello

  This generally if I understand your question, so I want to offer you a comprehensive solution first, here is the link:

  http://www.smartwebby.com/web_site_design/bullets.asp,

  It is interesting to work through this script.

  Hans-Guenter

• Align the two signals and measure the Phase Shift

  Hello

  I do an experiment in which I use the NI USB-6221 DAQ card. The jury is able to make 250 k samples/second. I want to measure two voltages in a circuit and find the phase shift between them at frequencies between 1 and 10000. First I ouputted a wave sinusoidal frequency variable through the Commission and applied to a test circuit. Then I used the Board to measure the two tensions consecutively (thus reducing the maximum sampling frequency at 125 k). I used the signals align VI and measured the two phases and then calculates the phase shift (VI attached in Phase 1). It worked well for the test circuit I built in which the phase shift went way logarithmique.20 degrees ~84.5 degrees and then stabilized. At frequencies above 5 000 Hz phase shift must have remained constant, but it varies more or less 1 degree. When the phase shift is 84.5 degrees, present a degree of variability is not particularly explicit. When I asked my program on the circuit that I really wanted to measure, the phase shift went from-. 5 degrees up to about 1.2 degrees. The change in the values of phase shift at high frequencies (> 3000) was environ.2 degrees. Given the small phase shift, this variation is unacceptable. Now I tried to use a sequence to each blood individually (increase the maximum sampling frequency to 250 k) and then align the two signals and measure the phase of each shift. When I use align it and re - sample Express VI to realign the two signals, I get the message "error 20333 analysis: cannot align two waveforms with dt even if their samples are not clocked in phase." Is it possible to align two signals I describe here? I enclose the new VI as Phase 2

  Matthew,

  I think I have an idea for at least part of the problem.

  I took your program data and deleted stuff DAQ.  I have converted the Signal on the chart control and looked then what was going on with the signal analysis.

  The output of the Waveforms.vi line has two waveforms, like the entry.  However, arrays of Y in the two waveforms are empty!  It does not generate an error. After some head scratching, reading the help files and try things out, that's what I think is happening: the time t0 two input signals are 1,031 seconds apart. Since the wavefoms contains 1,000 seconds of data, there is no overlap and may not align them.

  I changed the t0 on two waveforms are the same, and it lines up.  The number of items in the tables is reduced by one. Then I increased the t0 of 0.1 seconds on the first element. The output had both greater than the entry by dt t0 t0 and the size of the arrays was 224998.  Reversing the t0 two elements shifts the phase in the opposite direction.

  What that tells me, is that you can not reliably align two waveforms which do not overlap.

  I suggest that you go to 2-channel data acquisition and that it accept the reduced sample rate.  You won't get the resolution you want, but you should be able to tell if something important happens.

  You may be able to improve the equivalent resolution by taking multiple steps with a slight phase shift. This is similar to the way that old oscilloscopes of sampling (analog) worked. Take a series of measures with the signal you are currently using.  The make enough average to minimize changes due to noise. Then pass the phase of the signal of excitement to an amount that is smaller than the resolution of phase of sampling rate and repeat the measurements.  Recall that I calculated that for a 5 kHz signal sampled at 125kHz, you get a sample every 14.4 degrees. If shift you the phase of 1 degree (to the point/mathematical simulation), you get a different set of samples for excitement.  They are always separated by 14.4 degrees.  Take another series of measures. Transfer phase another degree and repeat.  As long as your sampling clocks are stable enough so that frequency does not drift significantly (and it shouldn't with your equipment), you should be able to get near resolution of what you need.  The trade-off is that you need to perform more measurements and may need to keep track of the phase shifts between the various measures.

  Lynn

• Aligning the print cartridge HP PSC 1500 series printer

  I just installed a new ink cartridge and try to align. When I open the HP PSC 1500 Setup page, it gives me the option "align cartridge". When I click on it it opens a dialog box titled 'printer properties '. There is no information on how to align the cartridge.

  Thanks for your reply. It didn't really solve my problem. As I've mentioned before, I tried to get the 'how' info from the HP PSC 1500 series control page that displays a link to "aligning the print cartridge. By clicking on this link opens a dialog box that has nothing to do with the alignment of the cartridges. It was not very useful, but eventually, I remembered what I had to do was insert the alignment sheet and press "scan."

• Align the PSC 750 printer ink cartridge error message.

  I just replaced only the black cartridge in my printer PSC 750.  (Will replace the color cartridge later as my money allows.) The printer is connected to my laptop, MacBookPro, under OS X, version 10.6 operating system.  After replacing the cartridge, I ran a self-evaluation report.  It seemed to run correctly.  No color cartridge only test model because there is no ink in the cartridge.  Then I ran the process to align the print cartridge which gives an error on the printer.  It displays "error: Align page not detected" when I clearly placed the page alignment on the scanner glass.  Tried this process several times and each time I get this error message.

  Could it happen because I have not yet replaced the color cartridge?  If not, then what?

  Alignment requires the black and cyan (or was it yellow on this model?) part of the color cartridge to print for correct alignment.  If you have an old copy of the alignment page you can use it, although the alignment would be suboptimal.

  Soak the printhead of the cartridge 78 in 1 "hot water for ten minutes and then gently the printhead from drying and put it back in the printer may allow enough ink complete the alignment page.

• align the ink cartridges

  Does anyone have an idea on how to align the cartridges to print on HP psc 1350 with Windows 7, which does not use the HP Toolbox?  Thank you very much for any suggestions on this.

  When a new cartridge is installed the PSC 1350 will automatically print an alignment page.  This page must be loaded on the scanner glass and the "scan" button pressed to complete alignment.  It does not require the computer see this page for more information.