alignment of pixels really annoying bug

Similar Questions

• WHY do we have a % * # update every 2 weeks until persists 1 really bad bug (fonts and sizes change randomly when entering)?

  Y at - it sort of STOP TB, to send updates every two weeks (and BTW this slowed down TB / crashed more and more in the last two months) until they have fix this really irritating bug to randomly change the fonts and sizes when you write an email? Outlook does not, Apple mail, didn't do so to stop spamming and begin to address the real problems for a change!

  Nothing of the sort, overall we are very poor typists. How can I know what others are doing? I do it myself. I touch type? Not and nor do the vast majority of people. Even those who say they do.

  How can I know something about the issue? I've seen other people complain and the results are similar to the serious, where my advice. In my opinion, that most of the people with problems touch with appearance and no content is also to experience. Most are apparently not aware more you are trying to improve the appearance of your mails using the fonts and sizes the worst they look almost invariably to the purchaser who does not have the police fancy you selected.

  In my opinion, the code that goes into the composer's poor by the standards of today and the suffering of his age and bitrot. Most of it is written in C++, and most of those who work on Thunderbird are people of Javascript. I do not worship at the altar of God any Mozilla and I have few illusions. Either on the code, program or the people who use it. Or at least I like to think so.

  What I hold as a hope, it's a complete rewrite of the composer happens, or at least people who can make the scriptable code so many of these things can be upholstered.

  Your comments about Microsoft releases and past years their fixation are neither correct nor helpful. Unfortunately the back doors and new threats are discovered almost daily. The software industry overall solves the problems as soon as they can and issues a patch. Automakers weigh the cost of litigation related to failure (how can die, be injured) against the cost of a recall. Sorry, but as far as I don't like regular patching, I prefer the approach of the automotive industry.

• How can I fix a slow scrolling, it becomes really annoying!

  I can't find a solution. Answers, I found online were to go into options > advanced > general and turn off the acceleration hardware and/or scroll smoothly. I tried all combinations and my scroll is still I assume one line per rotation which is really annoying! Please help me! Thank you in advance.

  Hello

  I'm glad to hear that your problem has been resolved.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• Why my iPod is unchecked music and why he plays an entire album when it is supposed to play songs randomly? This happened some time now. Since the last update? It's really annoying.

  Why my iPod is unchecked music and why he plays an entire album when it is supposed to play songs randomly? This happened some time now. Since the last update? It's really annoying.

  Why my iPod is unchecked music synchronization

  In iTunes, select iPod (click on its button on the device on the horizontal bar) to show his summary of the settings screen.  Make sure that the sync only checked songs and videos is checked.  If this is not checked and click apply.

  why he plays an entire album when it is supposed to play songs randomly?

  On the screen of the settings on the iPod, there is a setting for Shuffle.  It's probably on Albums.  Set it to shuffle songs.

• Gallery in photo book, annoying bug.

  As photos are imported in photo book in chronological order, it's a pain that photo gallery (photos showing all imported at the bottom of the window) always comes back to the beginning after having chosen a photo and put it on a page. You have to constantly drag forward to resume where you left and it consumes time and effort because it is not so easy to find your way in case you have lots of photos to choose from. Very annoying bug and it should be fixed as soon as POSSIBLE!

  tell Apple

  http://www.Apple.com/feedback/photos.html

  LN

• The functions of the left and right of my mouse buttons keep swapping without doing me anything, and it's really annoying!

  For some reason any the left and right buttons on my mouse keep turn on their own without me doing anything. Once this happens, I go into the properties of the mouse, apply the default and then that's fine. That lasts anywhere from 3 hours to 3 days. I don't know if it's a problem of Vista or my computer, but it's really annoying. I restarted my computer after changing the settings and it still does not help. Can someone help me with this?

  Hi regretfullybliss,

   

  Welcome to Microsoft Answers Forums.

  There could be conflicts with the key functions of mouse or a corruption with the mouse driver.

  I suggest you update to the latest mouse driver, you need to visit the Web site of the manufacturer of the mouse to the GET the latest drivers for the mouse.

  Updated a hardware driver that is not working properly

  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  How to change the mouse settings.

  http://windowshelp.Microsoft.com/Windows/en-us/help/efd700f8-bbc0-4F04-9f78-3bdb4bbf47011033.mspx#EF

  There could be the possibility that some third-party program or service is in conflict with the key functions of the mouse.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista cursor flickers background job to select Normal? Its really annoying

  Windows Vista cursor flickers background job to select Normal. It wobbles when I right-click, refresh, left-click etc and also all by highlighting the text in Internet Explorer. I have Windows Vista Home Premium 32 bit and Intel 82945 G GPU on board. Please help me solve this problem its really annoying.

  Thanks in advance

  Hi Arvind,

  Thanks for posting your question in the Microsoft answers Forum.
  Follow the steps in this thread for your problem with the cursor. Let us know if that helps.

• Contrast adjusts constantly itself - really annoying

  I have recently upgraded to Windows 8 on my laptop serial Windows 7 Vaio S (SVS151190S). This computer has the hybrid common graphic to Vaio Laptops, with a nVidia GeForce GT 640 M THE and Intel HD 4000.

  My question is this - whenever the display shows something dark (examples: movies, screen, pop up UAC start), after a second the screen allows you to set the contrast. Everything seems ridiculously faded, dark TV shows I watch turn crazy and I don't see anything because the shadows are so dark and icons and graphics that were not changed when the display shows something dark become illegible. It is terrible and I can't seem to find a solution to this.

  I disabled all parameters Adaptive brightness that I can find, including the VAIO Control center application and contrast "Adaptive" in the Intel Graphics Control Panel. This problem has occurred in Windows 7, but is CONSTANTLY happening in Windows 8 that's why I'm here. It of really, really annoying and completely ruins the experience. I looked for answers online, but they all seem to be describing a fix for the Adaptive brightness.

  If anyone has AN idea of what is happening and how to fix it, any input would be GREATLY appreciated.

  Hi William,.

  I suggest that you use the graphics card, one at a time and then check the issue. Disable a graphics card and check the issue with another enabled graphics card.

  Make sure you have the latest driver of the two graphics cards. You can use the link given here and find NVidea driver.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Follow the steps here to turn off the graphics card.

  (a) press the Windows key + X.
  (b) select the peripheral Manager.
  (c) expand display adapter . Right-click and select sand DI.
  (d) to restart your computer.

  Look for the question. Repeat the same steps for the other graphics card and check once more the question.

  Note: it is not necessary that two suitable graphics will be presented under the graphics card. Look under sound, video, and game controller.

  Write to us with the status. We will help.

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop

• A way to resolve the domain controller Adobe Acrobat Reader to open with the right hand "Interface" in the closed position - really annoying to have to close ALL THE TIME.

  A way to resolve the domain controller Adobe Acrobat Reader to open with the right hand "Interface" in the closed position - really annoying to have to close ALL THE TIME.

  Read this:

  https://forums.Adobe.com/thread/1817184?start=120&TSTART=0

• I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I hav

  I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".

  Interestingly, if I copy and paste your images into a new doc 2 points scored.

  I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.

• Is this really a 'bug' in dba_tab_columns?

  Hey guys, it's Xev.

  I've been struggling with this for weeks. No matter what I do, I can't get my procedure to see the dba_tab_columns inside my running procedure. Just jump and say

  'cannot see the table or the view', this generic response.

  Is there really a bug or a limitation with how I use this point of view s/n? is there something else I can do? It just won't recognize other users custom also.

  I have two basic lines of defense here, but two of them not what I need to do.

  Can someone help me on this please.

  OK, this is the 'first method' I have tried to use, it works very well, but 'only' for a single user at a time. I can't seem to 'find' the rest of the 'schema user. " He finds that I said

  but only in schema, the tables and the fields of the user who runs it. I tried to switch out (user_tab_columns) for dba_tab_columns, but it explodes and says that he "cannot see the table or view.

  It is my preferred method. If you change this option to find other other users in through everything to another the whole database schema, I would do anything for you!

  create or replace procedure find_str

  AUTHID current_user

  as

  l_query long;

  long l_case;

  l_runquery boolean;

  l_tname varchar2 (30);

  l_cname varchar2 (4000);

  l_refcur sys_refcursor;

  z_str varchar2 (4000);

  Start

  z_str: = ' ^ [0-9] {9} $';

  dbms_output. Enable (buffer_size = > NULL);

  DBMS_APPLICATION_INFO.set_client_info (z_str);

  dbms_output.put_line ('keyword Table column value');

  dbms_output.put_line ('---------------------------- ------------------------------ --------------------------------------------------');

  for x in (select distinct table_name from all_tables

  When the owner not in ('SYS', 'SYSTEM', 'MDSYS","OUTLN', 'CTXSYS', 'OLAPSYS', 'OWBSYS', 'FLOWS_FILES', 'EXFSYS', 'SCOTT',

  'APEX_030200', 'GENERAL', 'ORDSYS","SYSMAN","APPQOSSYS","XDB", 'ORDDATA', 'WMSYS'))

  loop

  l_query: = ' select "' | x.table_name | ''', $$

  of ' | x.table_name | '

  where 1 = 1 and (1 = 0 ";")

  l_case: = "box";

  l_runquery: = FALSE;

  for y in (select *)

  of user_tab_columns

  where table_name = x.table_name

  and data_type in ('VARCHAR2', 'CHAR'))

  loop

  l_runquery: = TRUE;

  l_query: = l_query | ' or regexp_like (' |)

  y.column_name | (', userenv ("client_info")) ';

  l_case: = l_case | «When regexp_like (' |)»

  y.column_name | (', userenv ("client_info")) then ' |

  '''<' || y.column_name | '>''||' || y.column_name | '||'' < /' || y.column_name | ">'' ' ;

  end loop;

  If (l_runquery)

  then

  l_case: = l_case | "ANY other purpose;

  l_query: = replace (l_query, "$$", l_case). ')';

  Start

  Open the l_refcur for l_query;

  loop

  extract the l_refcur in l_tname l_cname;

  When the output l_refcur % notfound;

  dbms_output.put_line

  (rpad (z_str, 29) |)

  RPAD (l_tname, 31).

  RPAD (l_cname, 50));

  end loop;

  exception

  When no_data_found then null;

  end;

  end if;

  end loop;

  end find_str;

  NOW,.

  It's the second method, she also did a good job of finding what I want it, but again don't search other users and on the other the schema. If you modify this to do find other users and another schema, I'd go crazy! Laughing out loud!

  For the test given just create a table in your schema and put a "nine-figure" everywhere in the fields and both these procedures will find them, but only for the 'USER '.

  AND, that's my problem, I have many customized user go on the forums and create procedures for each user. It is impossible to plant.

  I really need you guys on this point, Happy New Year!

  create or replace PROCEDURE find_string

  --(p_search_string IN VARCHAR2 par DÉFAUT ' ^[0-9]{3}-[0-9]{2}-[0-9]{4}$')

  (p_search_string IN VARCHAR2 DEFAULT ' ^ [0-9] {9} $')

  IS

  e_error_in_xml_processing EXCEPTION;

  e_table_not_exist EXCEPTION;

  PRAGMA EXCEPTION_INIT (e_error_in_xml_processing,-19202);

  PRAGMA EXCEPTION_INIT (e_table_not_exist,-942);

  BEGIN

  DBMS_OUTPUT. Put_line ('Table help of keyword/value of column');

  DBMS_OUTPUT. PUT_LINE ('---------------------------- ------------------------------ --------------------------------------------------');

  FOR r1 IN

  (SELECT table_name, column_name

  OF dba_tab_cols

  WHERE table_name IN (select distinct table_name from dba_tab_cols

  When the owner not in (' MDSYS', 'OUTLN', 'CTXSYS', 'OLAPSYS', 'FLOWS_FILES', 'OWBSYS', 'SYSTEM', 'EXFSYS', 'APEX_030200', 'SCOTT', 'GENERAL', "ORDSYS", "SYSMAN", ")

  APPQOSSYS', 'XDB","ORDDATA","SYS","WMSYS"))

  -WHERE table_name = 'FIND_TEST '.

  ORDER BY table_name, column_name)

  LOOP

  BEGIN

  FOR r2 IN

  (SELECT DISTINCT SUBSTR (p_search_string, 1: 28) "Keyword",

  SUBSTR (r1.table_name, 1, 30) 'table. "

  SUBSTR (t.column_value.getstringval (), 1, 50) ' / value of the column.

  TABLE

  (XMLSEQUENCE

  (DBMS_XMLGEN. GETXMLTYPE

  ("SELECT ' ' |" ") R1.column_name |

  « « DE » ' || R1.table_name |

  "' WHERE REGEXP_LIKE.

  ("' || R1.column_name | '",'''

  || p_search_string | ''')'

  () .extract (' LINES/rowset / * ""))) t)

  LOOP

  DBMS_OUTPUT. PUT_LINE

  (RPAD (r2. ("" Keyword ", 29).

  RPAD (r2. ("' Table ', 31).

  RPAD (r2. (("" Column / Value ", 50));

  END LOOP;

  EXCEPTION

  WHEN e_error_in_xml_processing THEN NULL;

  WHEN e_table_not_exist THEN NULL;

  WHEN OTHERS RAISE.

  END;

  END LOOP;

  END find_string;

  Happy New Year, if you can get this to find other users! Good luck!

  OK, just a quick update, all is not lost.

  I decided to use all_tab_columns and not to a stored procedure. Also, I made the diagram one passes in 'parameter' since I don't have the ability to create other peoples in the schema.

  Then I loop and use "regexp_like' (one of my favorite expressions) and use (immediate execution)... overall, I finally found a way to do...

  After the trial and efforts...

  Thanks to all who have contributed and helped

  Thank you

  Xev.

• Annoying bug report: frame 12 (really ADE)

  To publish after generating an epub that is opened by Adobe Digital Editions, one is presented with a dialog that says: "[ebook name] is not open, she draws you want to copy in a library? Below is a check box that says "do not show this alert again. However, there are only two options: copy at the library or cancel and dialogue does not remember the choice if you choose "Cancel".

  So my only option is to add to the library?

  Theresa,

  You can try using other freebie like Calibre, Sigil epub readers (new version just came out), Aldiko reader instead of the ADE. [I gave up to ADE long ago]

• Standard report - left align column not explicitly applied - bug?

  Hello
  
  I think that this post on the forum is very close to what I feel
  BUG: Standard - alignment of the column header problem report
  
  I have a theme which I think was originally based on theme2, using Apex 4.1.1 improved over time to 3.x.
  
  I've created a classic report using the standard template, and I have found that the data remain aligned in Chrome, but centered in IE8.
  
  When I look at the HTML code generated, the align property is added only when the property of the alignment of the column is set to the Center or right.

  <td align="right" headers="COST" class="data">$118.00</td>

  The model column is

  <th#ALIGNMENT# id="#COLUMN_HEADER_NAME#" class="header">#COLUMN_HEADER#</th>

  I would put this in the category "bug", but I understand that this seems to be a specific problem of the browser.
  
  All of the recommendations of the most elegant way fix this using CSS?
  
  Scott

  Scott.Wesley wrote:
  Hello

  I think that this post on the forum is very close to what I feel
  BUG: Standard - alignment of the column header problem report

  I have a theme which I think was originally based on theme2, using Apex 4.1.1 improved over time to 3.x.

  I've created a classic report using the standard template, and I have found that the data remain aligned in Chrome, but centered in IE8.

  When I look at the HTML code generated, the align property is added only when the property of the alignment of the column is set to the Center or right.

  $118.00
  

  The model column is

  #COLUMN_HEADER#
  

  There is a gap. A watch a td (table cell) element and the other a th (table header). Who is this?

  I would put this in the category "bug", but I understand that this seems to be a specific problem of the browser.

  Personally, I'm not really bothered about #ALIGNMENT # and oddities/bugs it. I always use CSS to align the columns (and I use a lot of named column templates where #ALIGNMENT # does not work in all cases).

  The attribute align on all elements of array is now illegal and should not be used. (APEX will have to catch up, but given the lack of attention Oracle gave to the HTML standards in their products over the years, I'm not holding my breath...)

  All of the recommendations of the most elegant way fix this using CSS?

  The elegant CSS to do this is to use an attribute selector:

  /* ID selector for the column header */
  th#COST,
  /* Attribute selector for cells with the header attribute "COST" */
  td[headers="COST"]  {
    text-align: right;
  }
  

  If this does not work in IE8, then a compatibility mode is, or models in the legacy of 3.x theme pages do not contain the necessary rendering trigger Standards mode DOCTYPEs. IE does support attribute selectors in standards mode.

• Although I loaded Adobe 13 (SEVERAL TIMES), it says "vulnerable." Really annoying! What can I do for this? Nothing? "

  I have windows7, essential security and all others is ok in my laptop. I keep up to date. Now, the only problem is when I try to check out it's plug-ins to date, all the other plug ins are but Adobe flash is not. He said vulnerable in red color. When proceed now updated, installed fine, but if after I double check if all plug-ins is up-to-date, there are once AGAIN this red sign: "vulnerable". I'm ready to change my browser to another, if this annoying problem seems to be fixed.

  Disregard my last post. I see that you use Firefox 30.0 (Beta) that contains a bug in the Flash plug-in detection.

  Related bug (read the Bugzilla Etiquette before you comment in the bug reports):

  • Bug 1011824 - Plugin check page displays the version of the plugin as vulnerable Flash even if the latest version is installed at Beta30b4, Aurora31.0a2 and Nightly32.0a1