Alignment of the default fields

Similar Questions

• Check in the default field value

  Hello! I'm checking in documents using the TELL and title is populated by file name, its fine I also filled content of file name ID this field too! How can I do?

  You can use (International) rules or filter values by default - see for example DynamicPrefix (filter) component in HowToComponents: http://www.oracle.com/technetwork/middleware/content-management/index-092832.html

  However, be aware that the content ID must be unique; in other words, if you check in the file with the same name twice, it will reject the second file.

• Update of the custom with the API fields

  Hi, (I am currently a place specifically to work on this, so I'd appreciate an urgent response.)

  Unless I missed something - there seems to be no document saying how to upgrade something else than the default fields? I use the RESTful API and could quickly recover contacts. The update Gets a 200 response - but how we update the custom fields?

  
  

  Here is a sample code... my guess to send just the name "internal" (line 3) does * not * work.

  
  

  $contact-> id = $id;

  $contact-> emailAddress = $lead1 ["emailAddress"];

  $contact->C_Accept_or_Reject_Date1 = time();

  $response = $eloquaRequest-> put ("data/contact /'. ') ($id, $contact);

  
  

  
  

  Update: I also tried the inner statement without success:

  $contact-> {'{{Contact.Field (C_Accept_or_Reject_Date1)}}"} = time();

  
  

  
  

  Thanks in advance,

  Sam
  

  Hi Sam,

  You'll want to see custom fields using their identifier unique and include them as part of a collection fieldValues can only be in your application. See the following example:

  'type': 'Contact,'

  'currentStatus': 'Action pending ',.

  'name': '[email protected]',.

  "accountName": "Eloqua, Inc..

  "address1": "111 Peter Street",

  "country':"Canada. "

  'emailAddress': '[email protected]',.

  'fieldValues can only be':]

  {

  "id': '100021."

  'value': 'value of the custom field.

  },

  ....

  Note that the fieldValues collection can only be contains a record for each custom and its corresponding value field. To search and retrieve the ID unique for your custom fields, you can use the following parameter:

  • GET (list): / assets/contact/fields? Search = {searchTerm} & page = {page} count = {number} & orderBy = {orderBy}

  We also have a post on to access the Contact fields that should help you.

  Please let me know if you need more information.

  Thank you

  Fred

• Is there a way to hide the? symbol, if the recording of the image field is empty?

  If that makes sense...

  Basically, I put a page of details about a site that allows the owner of the site display up to three images. However, sometimes they will download only one or two images.

  Currently, that looks like this:

  http://www.travel7107.com/destinationDetails.php?destinationID=57

  Is it possible to get rid of the small? icons where the image field is empty?

  I tried to download a small white image, and affecting the blank.gif than the default fields, but the file download the script seems to crush those who have a blank if no picture is selected to download.

  So for the moment I have them given this small image to use if they have not the images, but it would be nice to know if there was a way to avoid this step?

  Try

  <>
  If ($row_WADAdestinations ["image_2"]! = ")
  echo '';
  ?>

• default field validation rule

  Please,
  can someone help me find some information about the default field validation?
  I tried to create a validation rule for the field ContactEmail in Contacts, when I was testing created expression, I discovered that some sort of validation rule is already implemented. When I entered e.g. "gggggg.gg @" in the Email field I got the answer "* obligatory valid email", but it is not an ERROR to my validation rule, so I guess there must be a default validation on this field rule.
  
  I would ask, where can I find some other information about these default rules and how do I put or change.
  
  Thank you very much

  The Siebel email format mask is ' % @%.» % ».

  It is applied by Siebel and you have no control of it. The rule is also enhanced during the data import.

• How to change the default alignment of text in the cells in a table on the demand for numbers?

  I'm new to Mac. I own a MacBook pro MF839HN/A and currently using the 3.6.2 release NUMBERS (2577). I want to know if I can change the default alignment of text in the cell in a table of NUMBERS application? Also, when I select all the cells in a table to change their alignment, I can only change the horizontal alignment of the text and not the vertical alignment. To change the vertical alignment of the text in a cell, I have to select them individually. Help me with two questions.

  The only way I know is to create a table that is set up as you like, then save the empty document as a template customized by using the menu item "file > save as template:

  

• The default alignment grid size

  How to set the 'SIZE of GRID ALIGNMENT default"?

  The default size for the façade was 12. Now, it's 100. I don't know how he got that way.

  I set the default size from 100 to 12 in the properties of the VI repeatedly. However, whenever I start a new VI, the size of the grid by default is 100.

  Why the default size remains at 100?

  -Rodney

  Tools-> Options-> façade scroll down a bit and you will see the setting.

• By default the password field BEFSR41v3

  Has been changing some settings on the same page as the password change option and settings, also save all that was default in the saved password field.
  I have absolutely no idea what the password is now, and there's only one way to know without the router.

  For those who have, or a similar model, can you please go to the change password page and do a right-click, view source and find the line that says something like:
  input type = "password" name ='password (possibly) "value ='* I NEED TO FIND OUT *'"

  Whatever it is, it has not been set by Firefox. I checked through all my Firefox saved - passwords no reference to 192.168.1.1. Be terribly awesome if you could get this password for me... soon... = /.

  You really A.S.A.P.

  Also, I think that the model of router is correct. Its something like that anyway.

  Thank you very much.

  Same thing happened to me when I enabled UPnP in May. I had no idea that I had to type the password TWICE after making this change. Nasty bug that Linksy never solved. So, I could not come back in the interface, a week or two later. He said that I had the wrong password. I was quite perplexed because I knew I had the right password. I discovered the bad news in the Linksy dslreports forum. Many users Linksy got rid of the BEFSR41 because of this bug, and I have to buy another router Linksy either. All these months I was not able access the interface of the router.

  I tried the password "admin". Did not work. I tried a number of other channels who worked for some to the dslr forum Linksy, but none worked for me. The only solution is a factory reset. I don't want to do this because I have to use the beta firmware because Linksy has so neglected in never update the official firmware for many years. I can't use Ping Plotter Pro on the official firmware because it is too old and Ping Plotter will not work using the TCP and WinPcap engine. Thus, the default factory reset, then I have to Flash the firmware of the beta again means. I had to look too... like I have a new hard drive and all got transferred.

  So, I still don't have the reset as I did have to enter the interface. But that's because as Linksy never corrected that and I had no way of knowing that I had to type the password (twice!) after you have enabled UPnP that I buy Linksy again. I called Linksy support to ensure that the only solution is a factory reset and I was told that the router is no longer supported and Linksy would collect $50 from answering me my question. Gee... Why would I do? I can buy a new router for that! I was not unhappy with this router except how badly he manages DHCP and the fact that Linksy does not solve the problem of password or never gave us a more recent than the official firmware of 2004 and will not be replied to my question unless I have pay $50.

  Try this. He did not work for me but has worked for some. d6nw5vlx2pc7st9m

  http://www.dslreports.com/Forum/remark, 18616506? Hilite =

• Align the HorizontalFieldManager field

  Hello

  I have a few problems right align my custombutton in a HorizontalFieldManager.

  I have a simple code like this:

  public class HeaderManager extends HorizontalFieldManager{
  
      public HeaderManager()    {        super(Manager.NO_HORIZONTAL_SCROLL| Manager.NO_VERTICAL_SCROLL|  Manager.USE_ALL_WIDTH | Manager.FIELD_RIGHT);
  
          this.setBackground(BackgroundFactory.createSolidBackground(Color.RED));
  
          ButtonImage mButtonRefresh =  new ButtonImage("refresh",DrawStyle.RIGHT);        mButtonRefresh.setMargin(6, 10,0 ,0);        this.add(mButtonRefresh);
  
      }
  
  }
  

  It's a pretty simple code, but it does not work!

  My Manager to take full width but my field stuck on the left.

  My custom button (ButtonImageGadget) simply extends the field.

  Y at - it a way to make it works or we have an absolute positioning with layoutChild?

  Thanks for your help

  Its a bug in blackberry jde, try the following:

  1. If you want to add only the unique field in this Manager, and then create the domain Vertical instead of horizontal area manager Manager.

  2. If you have two or fields, and all this must be right aligned, and then create a VerticalFieldManager (Manager.USE_ALL_WIDTH |) Manager.FIELD_RIGHT), create a horizontal field Manager add all the fields to this horizontal Manager, and addition of horizontal to vertical Manager Manager

  3. If you have several fields and these should be aligned differently, then please create a horizontal field Manager add fields to this Manager, you want to align to the left. create a verticalfieldmanager using field_right and the entire width. Create fields in this handler with Field.RIGHT or Field.HCENTER style according to your needs.

• How to align the Hcenter fields in VFM?

  How to align the Hcenter fields in VFM? its giving problem

  solution on mine! years of posting for reference...

  what I did earlier.

  I wanted to have a manager of fixed size (maximum size) and put fields here, during an aliging then using stylebit it did not work. I used sublayout and fixed to what extent a perticular dimension

  resovled doing problem.

  It is not sufficient (or necessary) to if you want to use sublayout to have a fixed size, if you use the alignment, bcz setting hardcodedly properties, the other model overridden, so u must override the methods 'getPrefferedWidth & height', not the two held all the time, but according to the needs, if you want to:-alignment, you can try only method "width" and comparable to V-alignment. I included these methods and found that half of my UI related issues would have resolved more easily, if I tried this previously.

  Thank you best regards &.

• Change the default value for the field selection at run time

  I would like to know how can I keep persistent information in Sib. My problem is I want to change the default value of the choice field when running so that when the user starts the application again, it can retrieve the new default value.

  store values can be done using the persistence framework.
  See Persistable, PersistantObject and PersistantStore in the API.

  You can call setSelectedIndex on an objectchoicefield.

• Align the text field and a button.

  Hi all

  I use Oracle APEX 5.0.1.

  I tried to create a search page that contain a text field and a button.

  But I can't align the text field and button, so they can have the same top position.

  Could someone please help me solve this problem?

  

  Thank you and best regards,

  Troy.

  Hello.

  Have you tried to add a css attribute to the button? like: style = "top: 4px;

  Concerning

• Is there a way to change the default sort of the Explorer of Windows 8 fields?

  I would like a way to change the default sort fields to explore.  For example, a default pictures folder displays the fields 'name; Date; Type; Size; Tags '.  Is there a way to change this so that a default pictures folder indicates 'Date Modified' instead of 'Date' when sorting.

  In addition, the default order can be changed also?  Sticking with the example files pictures, is there a way so that instead of sorting by name, the default is sort by modified Date in ascending order?

  Try the following (similar to earlier versions of windows):
  Right-click on the folder
  Properties
  Customize
  -Choose among five models (General information, documents, photos, music, video - what's in a name?)
  -choose to apply to subfolders
  ARange such view as described by Kevin
  In the menu bar:

  View

  Options
  Change the folder and search options
  View
  Apply to records (of the same model)
  Hope this helps
  JVH

• Default properties for the text field of the PDF forms

  How can I set the default properties for the text field?  The creator of forms set of font sizes that are too large.

  Right-click on the field > use current properties as new default.

  It will keep the new settings until the next time that you do this. It is not specific to the document. Do it separately for each field type (text, button, etc.)

  

  On an existing form, you can select multiple fields. A pro tip, is that you don't have to close the properties to move from the field to the field to the field. Dungeon opens and work faster.

• How to define the format of a field drop-down list text align at the top of the field instead of the Center?

  I have a form with the fields of data entry simple Acrobat 11. I have, for the first time inserted drop-down lists and most of them is single-line fields. However, there are a few examples where my field must be larger to mask unwanted background. (The field will define the colur to white background are data entry, but I did not write the script for this.) When a selection is made, it appears centered in the field and I need to be aligned to the top.

  I guess I can put a script on the Format tab, in the custom format script, but I don't know enough about Javascript to run on the syntax. I guess it would be a simple line or two of code. Can anyone help?

  You have no control over this. They are always vertically centered. You can use a separate field in the drop down menu, however, and control its background. I suggest to use a read-only button.