Alireza

Similar Questions

• I have a problem. dose of Instant Messaging window Yahoo doesn't seem to me in yahoomail? I have Firefox version 9.0.1

  I have a problem. dose of Instant Messaging window Yahoo doesn't seem to me in yahoomail? I have Firefox version 9.0.1
  IE display this window for me
  I have the latest version of flash player
  I hope you can help me.

  Another question. Dose has a 64-bit version firefox?

  Alireza salvation,

  It looks like a known issue reported here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=713014

  There was a workaround solution posted, but I have not tested it myself. Here are the steps.

  1. Go to the Yahoo Messenger Options - change the window in the tab menu and press OK.
  2. Then go back and switch to the small window and press OK.

  Once the bug is resolved formally, you could try to run every night or Aurora build to use the hotfix at the beginning.

  Hope this helps!

• How to turn off microphone

  Hello
  Recently, I turned off my microphone by default of the laptop, now when I try to reactivate from start > Control Panel > Sound > record > devices show off, there is no microphone in the list to be activated.
  Please help me for this problem.
  Thanks in advance
  Alireza

  Hello

  I suggest you try these steps.

  Method 1: use Windows Sound Recorder to test the microphone.

  You can use this section to find out if the computer can record a signal from the

  Microphone and play again. Use Windows sound recorder to create an audio file using the following steps:

  a. connect the Microphone to the computer.

  b. Click Start, all programs, accessories, and select Sound Recorder.

  c. click start recording and speak into the microphone.

  When you are finished recording, click on stop record.

  Screen automatically opens.

  Type a file name and click Save. A type WAV or WMA file is created in the Documents folder.

  If you can record the Audio using the Microphone using the method above then the microphone works well.

  Now, it should work in any application that Supports Microphone. If the computer records the audio using the method above, then it might be a problem with the Microphone settings. Now, check the following settings.

  Method 2: Activation of the Microphone.

  a. plug the microphone into the computer.

  b. Click Start, all programs, accessories, and then click Sound Recorder.

  c. click start recording and speak into the microphone.

  d. Recording tab showing a signal detected for the Microphone device

  Note: Micro Icon should have checkmark on it. Is no green check mark, this means that it is disabled. If there is no green mark on micro it never works.

  To activate the Microphone, right click on Microphone and click Activate. If you do not see the Microphone in the list, right click on the white space and select devices see the disabled.

  Then, you'd see the Microphone. However, if you do not see the checkmark on it, right-click on it and click Activate. Select Microphone and click on set as default (if defined as default button is active).

  If you see the green checkmark on Microphone the Microphone really works.

  Method 3: Increase the Microphone sensitivity and non-disabling the Microphone.

  a. Select Microphone and click the Properties button.

  b. move the slider up to 100% of its range.

  c. If the mute is enabled, click the button mute to reactivate the device.

  d. If the Microphone Boost is available, amplify the volume.

  e. click OK to make the changes.

  Now the Microphone should work.

• distribution of the cep load generator model

  Hi guys,.

  You happen to know the model of distribution (for example. Fish , uniforms...) generator load Oracle CEP?

  See you soon,.

  Alireza

  Seems that there is no documentation for this.

  My curve experience shows that he does not follow a particular distribution. For example, tuple rate 100 per second, the distribution model is location t scale for some queries, while for 50 k and 100 k speed distribution is more apt to Weibull and generalized extreme value distribution.

  I just wanted to add some pictures here, but the system gives me the error. In any case, it is the answer.

• Get statistics of query Plan

  Hello

  I sent a simple application on the server by default (on localhost) OEP in Eclipse. I can see the results in the console when the generator to send messages to the port 9200. Also, I can see that the application is RUNNING when I check the processing of the event viewer (http://localhost:9002 / wlevs /)

  However, on the page of query plan, the result of stat is always 0 for all operators... I take a look at all the documentation, but I could not solve the problem.

  See you soon,.

  Alireza

  For the review of the performance, query plan statistics news are disabled by default. To activate it, please add following in the server's config.xml file before starting the server.

  true

  Kind regards

  XiYing
  

• Type = "load" equivalent to bounded task flow for clientlistener

  Hello world
  
  I use jdeveloper 11.1.2.2.,
  
  I developed a page and run a java script in the page loading (< af:clientListener method = "metod1" type = "load" / >).
  now I'm trying to move the page to a stubborn workflow feature and display it as a dynamic tab
  We cannot use type = "load" in stubborn taskflows.
  Is there a feature needs to be replaced by < af:clientListener method = "metod1" type = "load" / >?
  
  Thanks in advance,
  Alireza

  Check this one:

  Call from javascript to a page JSFF

• Problem with forms 11g

  Hi all
  I installed 11g on Win2003 R2 Forms and the facility is clean and everything works fine. The WLS_FORMS starts without a problem on port 9001 and when I asked his status through the http://localhost:9001 / forms he answers forms listener is running. My problem is that when I try to run my simple form I created by form 11g, the browser page comes with nothing in it. It shows no error message or anything that might be useful, and it does not show the form either!
  The URL that has been set in the forms preferences > DURATION is
  http://[machine_name]:9001/forms/frmservlet?config=other
  'Other' is a section of configuration in formsweb.cfg that I created to be able to run my forms from inside the form builder
  and it contains the following:
  
  [others]
  separateFrame = False
  LookAndFeel = generic
  UserID = scott/TIGER
  form = module1.fmx
  
  Does anyone have an idea?
  
  My best,
  Alireza Vali

  There are many ways in which you can host the plug-in on your own server. The easiest way would be to store the installable in the same Oracle home, in a directory that is already set up with a virtual path. For example, the directory of java forms. Then simply set up your formsweb.cfg to point to your own file rather than the distance.

  Thus, for example in 11 forms, follow these steps:

  1. download the JRE 32 bit on the Java website (http://www.oracle.com/technetwork/java/javase/downloads). For example, 1.6.0_24 is as follows: jre-6u24-windows - i586.exe

  2. copy this file to: C:\Oracle\Middleware\as_1\forms\java

  3. change the configuration of your web (formsweb.cfg) to reflect the change. So, something like this:

  jpi_classid=clsid:CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA
  jpi_codebase=/forms/java/jre-6u24-windows-i586.exe#Version=1,6,0,24
  jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_24
  #
  # YOU NEED TO CREATE A DOWNLOAD PAGE AND STORE IT INTERNALLY FOR NON-IE USERS
  # THE SAME METHOD COULD BE USED - STORE YOUR HTML PAGE IN THE JAVA DIR OR OTHER VIRTUALLY MAPPED LOCATION
  jpi_download_page=/forms/java/myJREdownloads.htm
  

  For anyone interested to download from a remote server, here are the necessary details for other versions:

  http://www.Oracle.com/technetwork/Java/JavaSE/AutoDownload-140472.html

  All the information above applies to earlier versions of forms too.

• Problem using the View object for validation

  Hello
  I defined a form of simple to practice swing. It has an entity object and two objects in view. One of these objects in view is an editable VO based on area of occurrence, and the other has a simple 'select count (*)' table. I defined a validation of the method on one of the EO attributes to see how to use the VO for validation. However, I set the Module of the Application to use both from my point of view. As much as I undrestood, when I define a VO for AM, AM will instantiate it the first time it starts to run. Here is the code inside the method for the FirstName attribute validation:
  
  / * Validation for first name method
  */
  public boolean validateFirstName (String data) {}
  ViewObject vo is getDBTransaction () .getRootApplicationModule () .findViewObject ("CountEmployeeInstance");.
  If (vo == null) {}
  System.out.println ("vo is null");
  }
  else {}
  vo.executeQuery ();
  If (vo.hasNext ()) {}
  System.out.println ("count =" + ((CountEmployeeRowImpl) vo.next ()) .getCount ());
  }
  else {}
  System.out.println ("vo has no other");
  }
  }
  Returns true;
  }
  
  The problem is that vo.executeQuery () does not return a any folder. In fact the vo.hasNext () returns false and I get the message "vo has had no news" on the console. Please be careful that the sql statement in the VO is always SELECT COUNT (*) and it returns a record. I found that if I use vo.closeRowSet () vo.executeQuery () before everything is working properly.
  Please tell me what is my problem and why it works that way?
  Best regards
  Alireza Vali

  Sorry Alizera, on transit to the officer of the WATCH.

  This can be the 'compulsory' classic of the substitution of issue position iterator. Take a look at the post following Sascha Herrman who addresses the issue and as solution suggests the creation of a new RowSetIterator to avoid the problem:
  Re: viewObject.executeQuery does not work the second time

  There are a number of positions where Sascha has solved this problem so a search can be useful to the effort on your part.

  Next post gives an interpretation of long-term by myself if accidentally you use getRowSetIterator that you might find useful, but essentially Sascha answer is correct, "to create a new RSI", I was talking a slightly different point:
  Re: [SOLVED] Re: how to browse all lines

  Let us know how you go.

  See you soon,.

  CM.