Problem with forms 11g
Hi allI installed 11g on Win2003 R2 Forms and the facility is clean and everything works fine. The WLS_FORMS starts without a problem on port 9001 and when I asked his status through the http://localhost:9001 / forms he answers forms listener is running. My problem is that when I try to run my simple form I created by form 11g, the browser page comes with nothing in it. It shows no error message or anything that might be useful, and it does not show the form either!
The URL that has been set in the forms preferences > DURATION is
http://[machine_name]:9001/forms/frmservlet?config=other
'Other' is a section of configuration in formsweb.cfg that I created to be able to run my forms from inside the form builder
and it contains the following:
[others]
separateFrame = False
LookAndFeel = generic
UserID = scott/TIGER
form = module1.fmx
Does anyone have an idea?
My best,
Alireza Vali
There are many ways in which you can host the plug-in on your own server. The easiest way would be to store the installable in the same Oracle home, in a directory that is already set up with a virtual path. For example, the directory of java forms. Then simply set up your formsweb.cfg to point to your own file rather than the distance.
Thus, for example in 11 forms, follow these steps:
1. download the JRE 32 bit on the Java website (http://www.oracle.com/technetwork/java/javase/downloads). For example, 1.6.0_24 is as follows: jre-6u24-windows - i586.exe
2. copy this file to: C:\Oracle\Middleware\as_1\forms\java
3. change the configuration of your web (formsweb.cfg) to reflect the change. So, something like this:
jpi_classid=clsid:CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA
jpi_codebase=/forms/java/jre-6u24-windows-i586.exe#Version=1,6,0,24
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_24
#
# YOU NEED TO CREATE A DOWNLOAD PAGE AND STORE IT INTERNALLY FOR NON-IE USERS
# THE SAME METHOD COULD BE USED - STORE YOUR HTML PAGE IN THE JAVA DIR OR OTHER VIRTUALLY MAPPED LOCATION
jpi_download_page=/forms/java/myJREdownloads.htm
For anyone interested to download from a remote server, here are the necessary details for other versions:
http://www.Oracle.com/technetwork/Java/JavaSE/AutoDownload-140472.html
All the information above applies to earlier versions of forms too.
Tags: Oracle Development
Similar Questions
-
Problem with forms 11g with Windows 2003 Server
Hi friends,
I tested compatibility of oracle 11g in various version today, I installed in windows server 2003 has increased with the same installation that I did for my windows XP that has worked well. Now, I started the server http for forms and then opened my application forms and create a simple forms when I press the 'Run the form' button all I get is page not found that any suggestions would be welcome.
I've already updated my java and it is a new installation of forms 11g.
Kind regards
Manoj Chakravarthymake one
opmnctl startall
of $OI/bin as well and check... -
installtion with forms 11g problem
Hi all
I have already installed in my system oracle database 10g and 10g (windows xp2 o.s) forms.
but when I install web logic and form of oracle 11g amine is TNS showing error (my interlocutor does not
After the installation of the logic of the web and forms 11 g)
where is the problem
is it possible or do I uninstall form 10g,
oracle Forms does not work on the oracle 10g database.
I want to know where is the problem
If any user successfully installed the server logic oracle forms 11g and web
with shapes datatbase 10 g and oracle 10 g.
so give me kinds screeen to installation details
web logic server and forms 11g.Yes,
You need WLS_FORMS to run the forms for 11g.
Are how TNS error you?
To form 11g to work, it is necessary to install WebLogic
-
Weird problem with forms and the definition of multiply
Hi all
I'm having a problem with the forms drawn with the pen tool and this weird border (no stroke). It appears when the transparency settings are changed (multiply, overlay, etc...). I've updated AI CC and restarted the program with no fix. The only known cure is to add a line to the object. Any help is appreciated! Thank you
Have you tried to switch between GPU and CPU preview?
Ctrl Cmd E E (Mac) (Win)?
-
Problem with form PHP site designed in Adobe Muse?
Hello friends, I just finished my first authority site design in the Adobe muse (www.healthieradults.com), and I seem to have a problem with my forms. First of all, I have very little or no experience in web programming, such as PHP to be precise. After uploading my Web site to host, I get an error message saying "PHP script is not configured properly on the Web hosting provider, check if the file has been uploaded correctly. I checked and made sure all my settings in muse are correct, but muse seem to be generating an error response in the file form_check.php on my server (www.healthieradults.com/scripts/form_check.php), I don't really know how all these php functions work, I downloaded the file and tried to not mess with it. Fixed in my email address in a place where I thought I'm supposed to, but still keeps giving me the same errors. You can see for yourself www.healthieradults.com. I need help please, maybe someone could show me how to configure the php properly script to work with my forms without errors...If you get the above error and get the same at http://www.healthieradults.com/scripts/form_check.php (which we are not able to open at our end), chances are that your host does not support PHP. Could you contact your hosting provider and confirm if your site has support for PHP and MySQL Server?
Thank you
Vikas
-
Hey
I have installation on windows 2008 R2 vmware ebs r12 and control first found the problem with the system utilities:
System utilities
command: cmd.exe /c E:\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin C:\VS\VC
E:\startCD\Disk1\rapidwiz > echo off
Defining the use of Microsoft Visual Studio 2005 x 86 tools environment.
/ cygdrive/c/Windows/system32/cmd
order «»who is available.
"gnumake" is not available.
ERRORCODE = 1 ERRORCODE_ENDwhich: no gnumake in (/cygdrive/c/VS/Common7/IDE:/cygdrive/c/VS/VC/BIN:/cygdrive/c/VS/Common7/Tools:/cygdrive/c/VS/Common7/Tools/bin:/cygdrive/c/VS/VC/PlatformSDK/bin:/cygdrive/c/VS/SDK/v2.0/bin:/cygdrive/c/Windows/Microsoft.NET/Framework/v2.0.50727:/cygdrive/c/VS/VC/VCPackages:/usr/bin:/cygdrive/c/Windows:/cygdrive/c/Windows/system32)
RW-50011: error:-the availability of utility systems test returned an error: 1
I thought I should put "gnumake.exe" in this sevral andi paths were then retry configuration and it's work, then I have finished setup, I installed java 'oaj2se' and I got id and pw in the browser explore, then when I open a windows form that is is not work and show me an error msg
FRM - 92101:there otherwise in the forms while startup.this server could be because invalid configuration please look at the log file of the web server for more details
etailed
Java exception:
session oracle.forms.net.connectionException:forms < 1 > abandoned: unable to communicate with the execution process.
at oracle.form.net.ConnectionException.createConnectionException (unknown Source)
at oracle.form.net.HTTPNStream.getResponse (unknown Source)
at oracle.form.net.HTTPNStream.doFlush (unknown Source)
at oracle.form.net.HTTPNStream.flush (unknown Source)
at java.io.DateOutputStream.flush (unknown Source)
at oracle.forms.net HTTPNConnection.connect (unknown Source)
at oracle.forms.engine.FormsDispatcher.initConnection (unknown Source)
at oracle.forms.engine.Dispatcher.init (unknown Source)
at oracle.forms.engine.Runform.initConnection (unknown Source)
at oracle.forms.engine.Runform.startRunform (unknown Source)
at oracle.forms.engine.Main.createRunform (unknown Source)
at oracle.forms.engine.Main.start (unknown Source)
at Sun.applet.AppletPanel.run (unknown Source)
at java.lang.thread.run (unknown Source)Please make sure that you have entered right in the file hosts as follows:
127.0.0.1 localhost.localdomain localhost
. If you need to update the hosts file, then you must run AutoConfig on the database layer node, and then on the Application layer node, restart all services.
Thank you
Hussein -
Hello!
I use Adobe Acrobat Pro (version 9.2.0). I'm an avid user, and recently I started to have problems with the form fields (text, list box drop-down list, check mark, ect.). When I go to applications-> add or edit fields and try to move ONE of the fields, they move sporadically. I thought that maybe it was my mouse, so I tried to move it with the arrow keys, and then it does the same thing. Sometimes I have to just move the field by a hair, and it clearly moves across the page!
I asked my people to TI, and of course this isn't their specialty, so we're trying to think of what it is NOT! I really need this to get back to normal, because I've created forms throughout the day.
Please, any help would be greatly appreciated!
"Did you accidentally set the ' snap to grid ' option?
You can also try to "fix".
-
Problem with form of smartview
Hi all
We have recently migrated Hyperion Planning 11.1.1.3 application to a newer version of 11.1.2.3 and many workbooks are saved with forms of the old version 1.3 smartview.
When we try to open the saved form, it tries to connect to the old version 1.3, and we see no possibility to change the details of the connection here.How easily update us the connection to 1.2.3 and open / save the form in the new version?
Thank you
Michel K
Hi AravindhK,
I went through the same process, a few months ago, and according to the number of MS Excel workbooks, it is really easy - although a tedious might say - to the convert\migrate the leaves of ad hoc recovery overall.
1. make sure that the URL of the shared connection is set to point to the new HP v11.1.2.3.x.
2. open a MS Excel spreadsheet to be repointe
3. from the main Ribbon bar, click Smart View > Panel
4. in Smart View Panel, locate and then click [content Document] by clicking on the arrow pointing down icon
5. a list of all the worksheets connected display then
6. right click on each definition of the connection, and then select [change the connection]
7 select the new connection APS URL from the drop-down and then click the [next] button
8 go again cube HP, and then click [finish]
9. Repeat steps 6 through 8 as needed
10. save the MS Excel workbook
11. click on the button [update] on each worksheet containing a form\adhoc retrieval\submission
The same principle applies to forms and worksheets adhoc retrieval\submission.
See how you go.
JBM
-
Hi all
I am facing problem with OEM 11 g. It was taken down automatically, however I am not able to find the specific reasons. From now on, it has been started.
But want to know the reasons for which he was descended. Please guide me how to solve.
Thank you2011-12-10 12:27:51, 106 EMAgent wire-4252630400 normal shutdown (00703)
Here's the clue. It is emagent normal shutdown. Check order OS history
As
$history | grep emctland check is only he planned to stop?
-
Hello
I have an application that runs on Flex 3.5 and some xdp created with LC Designer 7.1.
FRAMEWORK
The application should work in Windows XP and Windows 7.
It allows the user to submit an order and view/print the order confirmation.
The order confirmation is a pdf file generated by a xdp created with LC Designer 7.1 (and a connection via an xml data file).
Some pdf need to display Japanese fonts, others not (let's call them jpPDF and usPDF).
The XP and 7 environments have Japanese fonts installed.
USING XP
When you use a XP environment, there is no problem to create and display the pdf, the jpPDF and the usPDF. Everything works fine and as expected.
WITH THE HELP OF 7
When you use a windows environment 7, I have different issues according to the generated pdf:
jpPDF: Adobe Reader tells me that I don't have the fonts installed. When I accept to install the fonts, nothing happens and the pdf file appears completely empty.
usPDF: Adobe Reader tells me that the created pdf file is not compatible with the latest version of Adobe Reader, so I need to upgrade. But I have the latest version available...
Someone of you have encountered similar problems? Is there really something wrong between LC Designer 7.1 and Windows 7?
Thanks in advance for your time and help.
Kind regards
BS_C31
Hello
I had problems with the installation at the request of the language packs, which I presented something on our portal of the company. Seems to work fine if I download them manually, I think that there are five, it's one, Japanese http://www.adobe.com/support/downloads/detail.jsp?ftpID=4881.
I had no problems using Windows 7 however.
Concerning
Bruce
-
Problem with form while looking in the browser
I have a form I built and want to send the whole pdf to a url. I added a submit with an action on MouseDown button to submit a form. When I open the pdf file in Acrobat DC or Acrobat Reader DC he works perfectly. However, when I open the pdf file in the browser (and not in the stand-alone software of the real acrobat reader) I get a "Adobe Acrobat" error saying "error opening URL to submit this form. I am 100% sure that I use the adobe acrobat reader plug-in in the browser and I tried to open the file in the browser on both the local and a remote computer server accessing the Web page.
Is there a reason why I get this error in the software acrobat reader browser but not in the stand-alone software? Any ideas would be useful.
On a side note, I'm doing this because I need to save a copy of the PDF (filled by the user) for the server and the only way I know how to submit the pdf... and from there I a Manager php to from there. If there is no solution for the question above isn't another way to trigger the pdf file to save on the server after it has been changed (not on the page loading)?
Ahh, I think I found the problem... You may need to provide the URL of the PDF form that is placed on your site, so when he responds with TOT it will load the PDF file of the URL; in the contrary case; the TOT doesn't know which form to fill out. Also; be sure to choose IE or FF web browser by default in your operating system. because it can automatically open the PDF file with the default browser.
CHANGE FROM: Found in (the public service make_pdf)
$fdf = $this-> forge_fdf (", $fdf_data_strings, $fdf_data_names, $fields_hidden, $fields_readonly);
TO:
$fdf = $this-> forge_fdf ('http://www.your-domain.com/path/to/pdfdoc.pdf', $fdf_data_strings, $fdf_data_names, $fields_hidden, $fields_readonly);
And don't forget to change "http://www.your-domain.com/path/to/pdfdoc.pdf" to your real URL in the blank PDF file sitting on your website; and the PDF is accessible to the user submits the form.
-
Problems with Oracle 11g R2 XE
Hi guys,.
I had a problem and have to solve for abt a week now and tried a lot of solutions.
My environment:
Windows 7 Professional SP 1 64-Bit
AMD Phenom II x 4 940 @3.0 GH
4 GB of RAM (in use during the installation of 40%)
The Windows Firewall is enabled (but oracle.exe and lstnr.exe are configured as an exception)
Avast! FREE Antivirus Version 2014.9.0.2018
Installation (both times with the same result):
Installed O 11g 64-Bit XE in two different ways:
I was logged in with user lies in Admingroup
Installation started via right click with administrationprivileges
I activated the Administrators account and logged with adminprivileges.
After that, I installed the 11g XE 64 bit
between the two steps I cleaned and restarted my system, register was too empty and the file has been deleted manually
as a first step, I get this problem: Windows cannot find " " http://127.0.0.1:%HTTPPORT%/Apex/f?p=4950 "
-> Manually changing HTTPORT % to 8080
-> now I could double-click the shortcut, Firefox/IE/Chrome opens but 404 not Found error is returned
-XracleXETNListener OracleServiceXE, both are running
[code]
C:\Windows\System32 > lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on November 4, 2014 18:02
: 56
Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
Windows 64-bit error: 2: no such file or directory
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = D³rsinKurt-PC)(PORT=1521)
)))
STATUS of the LISTENER
------------------------
Alias LISTENER
TNSLSNR for Windows 64-bit version: Version 11.2.0.2.0 - Prod
ction
Start date November 4, 2014 13:53:50
Uptime 0 days 4 h 9 min 9 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Listener log file C:\oraclexe\app\oracle\diag\tnslsnr\D³rsinKurt-PC\list
ener\alert\log. XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = D³rsinKurt-PC)(PORT=1521)))
The listener supports no services
The command completed successfully
[/ code]
If Listenerservice is up and running, but I can't find the http Service 8080 with netstat-a
so I started to study a little more:
Registryfolder: HK_LOCAL_MACHINE\SOFTWARE\ORACLE is installed
following subdirectories are installed: KEY_XE, ODP.NET, OracleMTSRecoveryService
What I tried (both ways, with and without adminstrationprivileges):
I created two new DWORD values in KEY_XE ORACLE_SID_AUTOSTART and - STOP both to true and stopped and started services, nothing changes.
Inserted the two users (Administrator and normal user) in the Group ORA_DBA, nothing changes, even tried to set and the new
you wanted to connect to sqlplus using the console:
C:\Windows\System32 > sqlplus system
SQL * more: Production version 11.2.0.2.0 on 4 Nov 18:09:21 Di 2014
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter the password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session IDs: serial number 0: 0
Enter the user name:
When I start directly at the sqlplus prompt and write the start of the command I got the following msg: ORA-01031: insufficient privileges
I looked in the folder ORA_BASE and looked at the oradat file, it contains a XE-folder that is empty, the admin folder contains: XE / and adump, dpdump and pfile, all three are empty (what does this mean? No DB created at all?)
I looked at the file ORA_HOME and found initXE.ora, oradba.exe, oradim and PWDXE.ora
I looked in the oradim.txt log:
Kills Nov 04 11:21:17 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe-arret-SID xe - usrpwd * - immediate shutmode - log oradim.log
Kills Nov 04 11:21:55 2014
ORA-01012: not connected
Kills Nov 04 11:23:01, 2014
C:\oraclexe\app\oracle\product\11.2.0\server\bin\oradim.exe-demarrage-SID xe - usrpwd * - log oradim.log - nocheck 0
Kills Nov 04 11:23:38 2014
ORA-01078: failure in the treatment of system settings
ORA-01565: error in the identification of the file "C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora".
ORA-27041: could not open the file
04002 - OSD: could not open the file
S/O-error: (OS 2) Das System kann die angegebene Datei nicht find.
-> bingo, 1st question: there is no spfileXE.ora, how can I create it? more in the dbs-file there is only an init.ora and not initXE.ora?
Looked in the log-file files 5 from clscX.txt (probably after each systemreboot? containing the following):
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2014-11-04 - 13:53:52.197: [5576] [default] ut_read_reg:2:ocr SOFTWARE\Oracle\olr registry key cannot be opened. error 2
[DESTROYED] clse_get_crs_home [5576]: error recovery configuration OLR [0] [error opening of the olr registry key. The system could not find the file.
]
-> SystemLanguage is German, so I translated the German parts, perhaps he was lost in the translation of sth
-> 2nd question: is there a missing registry key?
In addition, I looked at the ORACLE_HOME/server/config/home cloesly folder:
cloneDBCreation:
SQL > Create controlfile reuse database "XE" value
2 MAXINSTANCES 8
MAXLOGHISTORY 3 1
MAXLOGFILES 16 4
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
DataFile 7
8 "C:\oraclexe\app\oracle\oradata\XE\system.dbf"
9 "C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf."
10 "C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf."
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf '.
LOGFILE 12
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: not connected
SQL > exec dbms_backup_restore.zerodbid (0);
SP2-0640: not connected
SP2-0641: "EXECUTE" requires the connection to the server
SQL > shutdown immediate;
ORA-01012: not connected
"SQL > startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora ";
ORA-01031: insufficient privileges
---------------------------
CloneRmanRestore:
"SQL > startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora ";
ORA-01031: insufficient privileges
SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
SQL > set off echo;
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
ERROR:
ORA-01031: insufficient privileges
SQL > spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\cloneDBCreation.log
---------------------------
PostDBCreation:
QL > Connect "SYS" / "' * ' as SYSDBA"
ERROR:
ORA-01031: insufficient privileges
SQL > set echo on
SQL > //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\fast_recovery_area ';
SP2-0103: nothing in the SQL buffer to run.
SQL > start
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5.
SP2-0640: not connected
SQL > create spfile='C:\oraclexe\app\oracle\product\11.2.0\server\dbs/spfileXE.ora 'FROM pfile='C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\init.ora ';
SP2-0640: not connected
SQL > shutdown immediate;
ORA-01012: not connected
SQL > connect "SYS" / "' & & sysPassword ' as SYSDBA"
ERROR:
ORA-01031: insufficient privileges
.
.
.
---------------------------
SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql;
SP2-0310: cannot open the file 'C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmssml.sql '.
SQL > @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\dbmsclr.plb;
SQL > DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
SP2-0640: not connected
SQL > CREATE the PUBLIC DATABASE LINK DBMS_CLRDBLINK with the HELP of "ORACLR_CONNECTION_DATA";
SP2-0640: not connected
SQL > CREATE or REPLACE LIBRARY wrapped ORACLECLR_LIB
2 a000000
1 of 3
4 abcd
5-abcd
6 abcd
7 abcd
8 abcd
9 abcd
10 abcd
11-abcd
12 abcd
13 abcd
14 abcd
ABCD 15
ABCD 16
17 abcd
18 abcd
19 16
20 51 8 d
21 L/XXXXXXXXXX...
XXXXXXX 22...
23
24.
SP2-0640: not connected
SQL > DROP TYPE DBMS_CLRParamTable;
SP2-0640: not connected
SQL > DROP TYPE DBMS_CLRType;
SP2-0640: not connected
SQL > CREATE or REPLACE TYPE wrapped DBMS_CLRType
---------------------------
XE:
The created instance.
So I hope this is enough information
Thanks in advance
Dursin Kurt
OK guys I found:
Problem is the XE.bat - Script could not add me to the ORA_DBA group.
Reason: my Computername and username, both had a mutation of the vowel 'u '.
Why it has not worked to my laptop computer company too have both my 'U' in the username
solved!
-
Problems with forms, rejected emails, Muse with Business Catalyst
I manage a website for a music festival. Within the site is a form of the artist's request. Beacon Festival 2015 | MUSIC (scroll down)
This site is operational for some years, and recipients (email addresses registered to receive applications) did not have the problems of email requests, until the last two weeks.
All of a sudden I get an avalanche of errors, informing me that observations could not be established.
First: am I right in thinking that I'll receive rejected requests, I hope as then I can pass them on manually.
Then... How to solve this problem? I tested the form, using my own email address, I get them perfectly with my email address from icloud, but NOT when I'm using my gmail or rocketmail account. Do I have reason to think that there is a mailbox filter setting?
How to inform the recipients and the Festival organizers how they need to put in place their mailboxes.
Help
Hi esermons.
It turns out that my address (e-mail address by default on e-mails from the system) has been the new parameters of DMARC via yahoo.
Fortunately, I have an e-mail account alternative, I can use. I just hope that they don't also use these new settings. If everything seems to work now.
I don't know there must be a way around them, I think that Google (gmail) have a way. But I am curious to know if you know of one.
Thanks for the reply me thread.
Penny
-
Problem with form in Adobe Acrobat pro ms machine
I created a form where I wanted people to respond to similar questions on each page of the form. There are several questions and boxes. I used to be able to copy the form field that had a similar text and just edit, but this time when I copied them they display the same information in each copy and I can't understand why.
It adds that I also had problems importing the form with Microsoft word 2013 files.
All of the suggestions.
Cassie
The fields with the same name will always have the same value. You must
Rename them after copying them.
-
Problem with form...
Greetings
I made this form of Muse, in the application it is ok, but when I download it looks like this.
It happens with all types of forms.
Thank you
Have you started this as a model file acquired from a third party? A colleague has provided a link to the page containing the form. The page contains several syntax errors in the code and more than 90% of the code on this page is not generated by Muse/Adobe. The code seems to come from third-party widget. I strongly suspect the syntax errors or other conflicts within the code not Adobe are the source of the problem.
I recommend you to isolate the cause of the problem to first remove all third party widgets and custom code that is inserted via insert HTML code or in the
in the Page Properties section.If this file has started as third party file model, you can contact the author/provider model for support.
Maybe you are looking for
-
Replacement of keyboard G71 340US
Completely separate from my last question, I also decided to replace my keyboard like the wear on this one, it is impossible to read some of the labels on the keys now, not to mention the accidental loss of a key. I could not figure out how to disco
-
I create the reset disk of password on another laptop, because the other laptop I forgot the password. There is solution in another thjred saying to open cmd, but I can't open it because there is no password to access. But I have another account whic
-
Listen to music and watch videos at the same time?
I wonder if I can listen to music on the music player app while I watch videos on youtube, because everytime I try to automatically do the music stops. Is it possible to disable it?
-
Configuration of e-mail from blackBerry Smartphones work not...
On my Blackberry Bold 9650 - I am unable to do the menu configure my e-mail address. I chose the configuration application. When I choose the icon email accounts that nothing happens! If I try to get out of this app, the phone freezes & I'm unable to
-
I have a data record meter Extech quite expensive. The software so that it runs only on a PC running XP or by loading the software in virtual XP mode on a computer with Win7. The software works OK in virtual XP mode, and I can open previously saved d