All CPUS with the same type of socket is not compatible with my motherboard?

Similar Questions

• Select all the fields of the same type?

  Y at - it an easy way to select all fields in all of the document of the same type (all text fields, or select all of the checkboxes)? This way I can edit them all at once for the same properties. It would be easier than several selections of drag or picking out of the field list.

  You can place the following script as the mouse Up JavaScript for temporary button. Or you can copy them into the interactive JavaScript console (Ctrl + J), select all and press Ctrl + Enter to execute it.

  To loop through all the fields in the form

  for (var i = 0; i)< numfields;="" i++)="">

  Get a reference to the current field

  var f = getField (getNthFieldName (i));

  Put a yellow background

  and the style of check to cross

  If (f.type = "checkbox") {}

  f.fillColor = color.yellow;

  f.style = style.cr;

  }

  }

  You will need to change to change field properties to change. They are documented in the Acrobat JavaScript reference, which is included in the free Acrobat SDK. Post again if you need help with the names or values you want to use.

• [ADF, JDev 12.1.3] Fragment 3 sections (each with a grid + form): best solution to commit / rollback all changes at the same time?

  Hallo,

  I need to create a fragment like page2create.jsff in this picture http://digilander.libero.it/flattit82/OTN_FILES/TotalCommRoll.png

  You kindly could give me some advice on how to achieve the result shown in the picture?

  Could you a panel tabs help keep the 3 sections on the same page and making it simpler handling of commit / rollback as requested?

  Thank you

  Federico

  Hello

  Yes, you can use panelTabbed to create this type of layout and for the handling of commit or rollback

  1. If you want to commit and a rollback for all 3 tabs then place these buttons (Commit and Rollback) outside panelTabbed and allow the creation, update and deletion on all tabs at the same time, after completing the user operation can use commit or rollback for all tabs

  2. If you want to commit separate and operation of catering for the different tab, then create and modify mode disable other tabs except the active tab, and only after a commit or rollback in the current tab allow the user to navigate to the different tab

  Thank you

• Can I have a form only for all instances of the application of the same type? (OIM 11 G 2)

  Hi all

  I have dozens of instances of the application of the same type (DBUM connector) so I was used to specify the same shape and the same user object while creating instances of the application.

  Is it safe? Or is it better to create a new/different shape for each instance of the application?

  Many thanks and best regards.

  Even if this is the answer, I would say that Yes, always use the same form name in the instance of the application. Recently came across the issue in R2BP10 and R2PS1BP02, where there are several child forms an instance of the application if different names are used for the name of the form in the instance of the application, then the form does not display data in the user interface.

  -Marie

• How can I disable all tabs at the same time?

  How can I disable all tabs at the same time with the IMac?

  Ask yourself how to close Firefox with multiple tabs / windows open?
  
  Firefox menu > exit.
  
  Or, you try to do something else?

• I have 2 gmail accounts. It will work correctly will not. All parameters are the same. What do do?

  I have 2 gmail accounts. 1 works fine, the other does not - but I can use very well with Safari. All parameters are the same. What should I do?

  URL of affected sites

  http://https://www.google.com/accounts/ServiceLogin?service=mail & passive = true & rm = false & continue=https%3A%2F%2Fmail.google.com%2Fmail%2F%3Fui%3Dhtml%26zy%3Dl & ASB = 1eic6yu9oa4y3 & ss = 1 & = 1 CSC < mpl = default < mplcache = 2 & hl = in

  Try to clear your cache and cookies.

  1. Open the Tools menu, then select clear recent history...
  2. In the time range to clear: drop-down menu, select all.
  3. Click the arrow next to Details to display the list of items that can be cleared.
  4. Select Cookies and Cache.
  5. Click clear now.

• Open program of the two facades of the same type of v.i

  I would like to know if it is possible to open by program of the two facades of the the same type of v.i, but with activity on a front panel without impact on the activity on the other side... for example, the way that you would open two windows of a chrome for example of browser.. .thank you

  Want to open two instances of the same VI?  It's simple.  Just do the reentrant VI.

• How to convert an array into a cluster of the same type as the one used to build the table previously?

  I have a group of 6 items I need to change in a table for the part of the VI process.  What I can do, but then I need to change in a cluster of the same type to be used elsewhere.  When I change the table in a cluster, I find myself with a cluster of 9 elements, which of course is not compatible!

  I am attaching snapshots of context-sensitive help in the initial cluster, the intermediate table and the final cluster (bad).  Regarding the photos, the length of the 1 d tables and values in their midst are the only subject to change things.

  Please could someone help by suggesting ways to work around this problem.  Thank you

  Please do not post bitmaps by chaning simply .jpg file name extension. Do not change the file type. There is a good reason why the forums software does not bitmaps, and this is because the file sizes are huge.

  To your question: right click on the table of the Cluster service and select 'Size of Cluster' in the context menu to set the size of the cluster of output.

• How to make all audio at the same level?

  I have a sequence of many clips in first pro, and I could swear I've heard of a way to make all audio on the same level or db. Is there a way to do this? I have a few clips in the timeline with different levels and should be old enough to go to manually balance their volume.

  There is a way to do what you want, but it must be used with caution.  If you open the Audio Mixer Panel, select mixer of track and the track that your clips are on.  Click on the arrow at the top left of the track work (you may need to do it twice) and and access the small white window that goes down.  (See using Adobe https://helpx.adobe.com/pdf/premiere_pro_reference.pdf page 365 if you have not done this before) In the right side of this window, right-click on one of the spikes back arrow and select Amplitude and Compression and dynamics.

  

  The word dynamic appears in the white window at the top of channel mixer.  Left click on the word dynamic and select Edit.  I pasted below the appropriate settings.

  

  If you are not familiar with Compressor/Limiter, use the parameter above.

  Now read your timeline and listen carefully while I look at the counters this setting should be good for normally recorded material, and I hope that you do have to do something more. If there is still following problems may be necessary. Schedule audio below (2) drag any clip that's too soft.  All that is too strong to do drag on the calendar below that (3). For the dynamic audio editing 2 repeat the process with the effect but change the makeup to 12.00dB.  For editing audio 3 change the makeup to 0dB setting.  It's not perfect, but it should give you a low-tech solution.   I hope this helps.

• How can I allow only a specific list of employees to receive marketing emails, but exclude all others in the same company?

  We have an important customer who said they don't want their employees who receive emails from marketing except a specific list of their management team. Also, we do not want the employees of our customers who decide to opt-in to receive emails from our registration page if they use their work email address.

  How can I allow only a specific list of employees (management team) to receive marketing emails, but exclude all others in the same company?

  One way is to create a list of sharing, "company A does not include." Build a program in the program generator with a charger that looks for the domain "company A". Place a filter in the program on a decision rule with the emails to management teams; If they are in the filter (that is, they are on the management team), remove them program, if they are not (that is, they are not the management team), add them to the list of sharing "excludes company A. Then you can add the list of sharing "Company A excludes" as an exclusion on your segments or implement a model that they will automatically as an exclusion.

  They oppose all non management team emails? If they are, as an extra precaution, you could add the "exclude company A" to master exclusion list.

• When selecting several fields of the same type why tab formatting does not appear in the properties?

  Creating pdf with lines Qty and total order forms, I want to format the fields as number with 0 decimal places for the qty column and the sign $ and 2 decimals for the totals column.

  Why when choosing several fields quantity, then go to properties, the format tab disappear? Why do I have to choose and the format of each field one at a time? They have the same type of field.

  I'm working currently on a document with more than 200 fields are most of the quantity fields and others are total fields. I right click on each field individually.

  It's 2015! Can you imagine if Excel did it?... Adobe WTF?

  Only the Adobe developers can answer why it is like that, but it's unfortunately.

  The only solution is to use a script to set the Format setting for several fields at the same time.

  I developed such a tool, so if you are interested you can get it here: Scripts custom Adobe: Acrobat - Format applies to several text fields

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• Any way to update all items at the same time?

  Any way to update all items at the same time?

  is one by one, the only way to update?

  I have 68 articles up to 800 MB.

  Unfortunately, the team has not added an update all feature. I think that this is scheduled for February.

  If you have your folders and files properly configured with a sidecar.xml file, consider the deletion and re-creation of the folio.

• using a different material of the same type

  Hello

  I wrote a code in LabVIEW and data acquisition that I pointed out where the signal will be sent to the and where it will make the acquisition of. I use USB6009.

  It turns out that when you use a different USB6009 the program will not work because it has a few other serial numbers. I need to configure the program for EACH DEVICE no matter if the appliance is of the same type?

  How about exe? Suppose I want to send a package to someone away who has same device type but of course physically different?

  (this is a basic type question but I'm always hard to find answers to my questions generally find manuals and materials to get a good point of departure-> a novice can really get lost)

  
  

• Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image

  Whenever I have download my photos in the photo gallery, the icons of all out like the same generic image for each photo, instead of actual miniatures of the photo itself.  I can't find the pictures I'm looking.  Why is this happening and how can I solve this problem?

  This parameter can be:

  (1) open Folder Options (search for your search box on the start menu to find)

  (2) on the display tab, verify that the "always show icons never thumbnails" is off (disabled)