All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

Similar Questions

• I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

  I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

  This could be a problem of twitter than compresses uploaded photos?

  Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

  Mylenium

• Where did my design go?  I created 4 pages for web design and I was finishing up the home page, all the other 3 pages have simply disappeared, the layers are empty? I spent 4 days design that... How to make that back?

  Adobe Muse: Web design.

  Where did my design go?  I created 4 pages for Web design and I was finishing up the home page, all the other 3 pages have simply disappeared, the layers are empty? I spent 4 days design that... How to make that back?

  I restarted the laptop,

  creates a new document and quickly made 3 new pages... and yet once... These pages have disappeared?

  Please provide a quick solution for me because I have to present my work to the customer.

  Did you remove all traces of high level in the layers (i.e. "layer-1") Panel?

  When something like you describe is reported, most often the user does not understand the layers of high level exist across all pages and updates on the page of your site. If you delete "Layer 1" you may remove the content of all pages of your site.

• All my pictures have disappeared from the PSE Organizer 13 (after I've updated).

  All my pictures have disappeared from the PSE Organizer 13 (after I've updated).  The files are all on the hard drive.  When I try and import them, said organizer that they are already in there and I cannot proceed.  When I select a keyword, get the message "NO MEDIA to DISPLAY.  I may be dense, but I find the search function of the Forum to be nearly useless, unless I just happen to enter the Exact name of a subject.

  I have now no access to 35 000 files maybe 12 years of use of PSE!

  GFrey

  Hello

  Operating system that you are running on?

  What version you put in?

  In the Organizer, what view do you - use in the display menu is details checked, or unchecked - t - it make a difference?

  On the view menu, select media types - are all verified?

  Menu, select hidden - files is in view - show all files audited?

  I assume you're in the media view, what happens if you select the places people or events?

  Brian

• Remote PC stops responding when the lines are added to a multiline textbox

  Hello

  When connected two RDP connections and multiline textbox is visible and always up-to-date (e.g. time real record on the screen), then all other processes and threads are suspended on the remote PC. For example, the task manage does not refresh, the clock stops, if you have a few applications running on this PC Server/services so their customers will get the writing/connect timeout errors, etc.

  to reproduce this problem:

  1. create a test application simulating recording in real time on the screen. For example, create a new GUI application (for example, in visual basic, delphi, etc.), several (for example six) textbox, control and set multiline = true (or use TMemo components in delphi), add the button and code to add rows in a loop (for example 200 iterations) these textbox/TMemo controls (see the sample code below). Build the executable

  2. have three PC of loan. The first connect to second via RDP and from there linking to third parties via a second RDP connection. Third PC start test application, that you created in step 1. While the lines are added to the multiline/TMemo text box, try to do something with this PC, for example open the Task Manager, check how it is refreshing, open clock and note how seconds are proliferating, try to connect to some services from another PC (shared disk for example, ftp, web, etc.) and see how to answer they are

  Windows 2000 seems to be ok, xp, 7, Server 2003/2008 have some problems

  is there something that we could do to make the third-party application with real-time logging to the multiline/TMemo text box does not slow down or suspend our services that are running on the same PC, when someone connect via RDP? also, it would be great if microsoft could fix this problem

  example code:

  For i As Integer = 1 to 200
  Dim s As String = «»
  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox1.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox2.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 10
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox3.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox4.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox5.AppendText (s & Chr (13) & 10)

  J As Integer = 1 to 20
  Convert.ToString (i) & s = s & ""
  Next J
  TextBox6.AppendText (s & Chr (13) & 10)
  Next I

  var
  i: Integer;
  s:string;
  Start
  for i: = 1 to 200 start
  s:='';
  While length<20 do="" s:="s+intToStr(i)+'">
  glMemo1.Lines.Add (s);

  While length<40 do="" s:="s+intToStr(i)+'">
  glMemo2.Lines.Add (s);

  While length<60 do="" s:="s+intToStr(i)+'">
  glMemo3.Lines.Add (s);

  While length<80 do="" s:="s+intToStr(i)+'">
  glMemo4.Lines.Add (s);

  While length<100 do="" s:="s+intToStr(i)+'">
  glMemo5.Lines.Add (s);

  While length<200 do="" s:="s+intToStr(i)+'">
  glMemo6.Lines.Add (s);
  end;

  Thank you
  Paulius

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  you might do better at the forum above. Good luck. :)

• I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, even if the only files I have to use the old are the .xml, .itl.

  I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, although the only files I have to use the old are the .xml, .itl and current music files. Is this enough information to do it, and if so, how should I do?

  I lost the other information by following the instructions found online of other attempts. I have unfortunately seem to have lost all that concerns my old library with the exception of the foregoing. I have been using an external hard drive to make this attempt. When iTunes opens it is empty, and when you try to import the .xml I only get playlists, although there is nothing inside of them. It would not be the end of the world for me to start all over again, I've not lost music files, but loading in my all of my old info is much, much, much more desirable. Thank you!

  I'm sure that the sides are stored with the file of 80%. (wav mp3/4 whatever)---> or at least the should be!

  Just install itunes.

  Copy the contents of your old folder in the itunes directory and start itunes--> it will do the rest.

  PS...
  However, I wouldn't bother with itunes more... windows media player is pretty cool in 7, does all the same things.

  Personally I stick with the purchase of CD (mp3 downloads are a rip off)

  'Cool' apples, however, is not it... and what would we do without our podcasts (what happened to the embedded html objects I don't know) computer nerd who serves the grannies

• question about wordpad, because the lines are separated by a blank line

  When I type in WordPad, the lines are separated by a blank line, that is, the 1st line climbs to the 3rd line, with the 2nd empty line, it takes double up typing something.  It's the same thing with the types of different fonts.

  I tried to use 1.0 spacing of lines in the tab "paragraph" Section; but this tab doesn't seem to work properly.  The lines are always separated by a blank line.

  Looking forward to your reply and thank you.

  Wu Carlotta

  Set the line spacing to 1.0 and uncheck the ' Add 10pt space after paragraphs... :-)

• Sales OM Order Header must be closed immediately after the lines are closed

  Hello

  Sales OM Order Header must be closed immediately after the lines are closed.

  Could you tell me how to change the header workflow, if someone has done this... could you please share.

  Thank you

  Hello

  Did you run the workflow background process after changing the workflow?

  Please test again and made me know

  (1) change the relative duration of workflow

  (2) create new order and close the line

  (3) run the trial context of workflow...

• . Files NEF (Nikon D600) in Camera Raw (bridge CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good.

  . Files NEF (Nikon D600) in Camera Raw (Adobe CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good. There is no update available.

  As it appears in Camera Raw

  

  Exported

  

  In Bridge, open camera raw preferences and uncheck the option of graphics processor at the bottom of the dialog box.

• My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  Found an answer online. Here it is:

  I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

  Go to file > project settings > General and only software switch.

• My office has just done a repair XP after a hardware change and now all user accounts have disappeared and he asks the administrator password when connecting!

  We have a unique system of Windows XP that run the software of engineering for certain calculations. All other systems running Windows 7, but what a XP system because it's the only thing that our calculations software runs on.

  CPU of the XP computer died on us and we had to replace the card mother and CPU. After the change of equipment, following Microsoft's OWN guide on the running an XP repair, we ran the system repair and got all the way to the login screen (no blue screen not as before repair). However, none of the accounts are there and he asks an administrators password. The system has NEVER had a password to our knowledge, it was built in the House, and all simply by clicking on the Administrative login asks for a password.

  What can we do? We needed this fix before today and wait for the repair of the system to do. Is it possible to enter the system to run the software? We tried the SafeMode (all forms) and they all will ask a password after Windows loading.

  It's so frustrating.

  (PS I have been building computers for nearly 15 years and have never had this happen)

  Thanks for the quick response. I looked into the system with a "start-up" program All original profiles seem to still be there. I don't know how to make them appear well. Can you direct me or tell me, how to make profiles see the place?

  The biggest problem, outdoors is not be able to sign more, is that the engineering calculation software is locked to this PC. It can be installed anywhere else without having to pay for a VERY new (I think that thousands of dollars) expensive key or a new version of the software.

  :(

  Yes, it's a problem.
  I believe you can use a UBCD4Win CD or Hiren Boot CD to locate and right click on the files you want to change. And then, if you properly in your repair facility, you change the attributes after you're done.
  Some guides are better than others. And here's one that I like:
  http://www.windowsxpprofessional.WindowsReinstall.com/indexrepairguides.htm
  If necessary, hire a PC Tech. It's much cheaper than buying a license that is thousands of dollars!

• Windows 7 Home Premium - all user accounts have disappeared after the update of Windows...

  My Windows 7 Desktop is really watered.  After a Windows automatic update, none of the user accounts appear in the login window.  Only a generic connection where you will need to enter the user and the password are displayed.  And when I enter the user name and password, I get a message that they are not valid.

  Here are a few additional pieces of information:

  1. I tried to restore to the point before the update, but it fails.  I get a message that there are missing files.

  2. my other restore points I had before the update are no longer available.  I don't know what happened to them that they do not appear on the screen of restore points.

  3. I can't log on to the computer at all, none of the accounts work.  I can get to a command prompt by using the repair disk, and I can see all the folders for the users.  So everything is intact.   Something must have happened to some system files and thus connect is not possible.

  4. users appear in the list of profiles in the registry.

  5. no windows service start because none of the users are no longer valid.

  6. I tried sfc/scannow, but I get an error "already waiting.

  7. I tried to add users on the command line using net and they are successful but even when they do not appear on the login screen and I can't manually type in these user accounts - I get the message that they are not valid.

  I tried searching online and I'm still not able to connect to the computer.  It has been 2 days of downtime.  What happened to my old restore points?  And why doesn't my restore points created by the work of windows update?

  I want to just restore from factory default, but I'm afraid I'll lose data in particular, all of the files currently sitting in the user folders.

  Any advice would be much appreciated.

  Greg Lang

  E-mail address is removed from the privacy *.

  Here are a few comments:

  1. I tried to restore to the point before the update, but it fails.  I get a message that there are missing files.

  -> Which files are missing? Can you give an example?

  2. my other restore points I had before the update are no longer available.

  -> This happens after the automatic updates.

  5. no windows service start because none of the users are no longer valid.

  -> How to tell you, because you were unable to connect?

  7. I tried to add users on the command line using net and they are successful but even when they do not appear on the login screen and I can't manually type in these user accounts - I get the message that they are not valid.

  ->, I guess you have done this so that in the WRE (repair Windows environment). It is a ghost environment that disappears that you restart the system. Drive X: is a virtual, not a real disc.

  I want to just restore from factory default, but I'm afraid I'll lose data in particular, all of the files currently sitting in the user folders.

  -> Many people are unaware of the need for regular backups (for example, weekly) until they are suffering from a major disaster.

  Suggestions

  Going by your description, I suspect that your existing accounts are irreparable. They need to be rebuilt. User data appear to be safe.

  Option 1. Use the console commands then in WRE to save all the files of the user on an external hard drive. A disk 2.5 "500 GB in a USB enclosure costs less than $60,00. After having tested the files on another machine, perform a destructive factory restore.

  Option 2. Start the computer with a boot of Ubuntu CD, then its GUI allows to save files to the user. It takes time to burn such a CD, but the copy process is easier. When you're done, do a factory restore.

  Option 3. A somewhat complex process allows you to create a new admin account, and then use this account to create new user accounts. You must then manually configure each of them (for example Outlook) and move their records of the old data to the new profile folders.

  There is also a method to restore old files registry of a set of backup files are a few days old. In your case I wouldn't consider as it would create a disjoint system: the registry files refers to a set of files that have been largely modified by the update.

  Post again if you need more detailed instructions for the option that you favor.

• All my settings have changed and all cookie exceptions are deleted

  I generally work with disabled cookies (do not allow web sites to store cookies). I then manually allow selected sites to do so.

  Recently, I tried to add a site to the exceptions list only to find out that good number of my settings were changed and all my exceptions have been removed.

  I do not did it intentionally. The only thing I can think is that I allowed FF upgrade to 36.0. I think it was a few weeks ago.

  How can I get the list of exceptions in the cookie back? There was at least 100, perhaps much more. I have no way of knowing which they were all.

  How can I avoid this happening again?

  It seems to work.

• All my posts have disappeared from the Inbox.

  I realized there is a similar problem posted, but proposed solutions don't work here and the details here are different.

  All messages have disappeared from the Inbox. The sent box is fine, but deleted from the Inbox messages do not appear in the Recycle Bin.

  A search of the Inbox for messages of size > 0 allows me to see the messages and respond to them.
  If I move a message to another folder the moved message is invisible but believes it is search.

  Deleted messages are in the trash folder, but is not visible. A search in the trash finds them.

  Messages in the search boxes reuse (response, delete), but try to delete a selected message in the search box list has no effect.

  I found a solution. I can't take credit, but I tell you that I was almost embarrassed the simplicity of the solution and the problem.
  AT & T ConnectTech technician admitted that when I could left click and select the message in a tab, it was probable that nothing was clicked in the "select to display columns" in the top right of the CT. He clicks on a selection of articles and automatically that my messages appeared.

• All 4 printers have disappeared from the list of printers & faxes; reason & need help please!

  Good day to all! (I hope yours goes better mine has)

  When you try to access my internet postage program, I got a message that it was unable to initialize the printer.  When I checked the list of Printers and faxes in Control Panel... I find 4 all printers who WERE there yesterday... are now gone.

  (This excerpt shown below is extracted from the Microsoft support page & described EXACTLY my problem)

  • When you click Startand then click Printers and faxes to try to view your printers, no printers appear. This problem may occur even if you have a printer installed.
  • When you click Add a printer, or when you try to print, you may receive the following error message and cannot add a printer:
  "Operation could not be performed.  Printer Spooler service is not running.

  I tried several times to use "Fix - it" Microsoft online service, and he could not solve the problem.  I just kep saying me he couldn't solve the problem.  It is absolutely No. MS supports available unless you have at least $59.00 or more to pay for trying to help!  "Terminal" and valid on a model of disability very limnited former fighters from one month to the other... I could not certainly not even begin to afford no paid... help unfortunately.

  I am NOT computer saavy and I don't any idea as well WHERE to start... much less HOW to solve this problem!  Unless I can get this printer spooler service, or something else... running... I can't even begin to try to re - install a printer I have.

  I would greatly appreciate any help anyone can offer!  I'm at the end of my tether here!  Thank you very much for your time and review!

  Pete C.

  For the moment, I'm inclined to let my "sleepine XP 'dog' lie'... Since things seem to work almost normal again.

  Good plan.