All one deployed ESXi 5 to use the firewall function?
Ideas or recommendations are welcome!
myrah111 wrote:
To rephrase the question, do you have examples of practice of the use of firewall of esxi. There is a physical firewall, firewall esxi 5 additional value may be added?
If you already have a VLAN internal for different types of traffic, such as management, VM traffic and similar, and have for example of router access lists which control of routing in VLANs, you probably won't need to change anything on the firewall of ESXi.
If it is possible for end-users to access the Management VLAN and that try to connect to your hosts, this could be a security risk and you might on the host itself, configure the firewall to limit the IP networks that need to accept connections on certain ports.
Tags: VMware
Similar Questions
-
When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?
I have a critical application in real time, in which I use a piece of DLL function developed in C++. It is ok? Make sure any senior developer?
Thank you in advance.
The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.
The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.
-
All shortcuts of my open itself using the vlc media player file
Accidentally, I changed the default program to open a shortcut file. All shortcuts of my open itself using the player file vlc instead of open like .exe file or almost. How can I solve this problem?
Hello Brijesh,
I suggest you to refer to these items and check if that helps.
Changing the programs Windows uses by default: http://windows.microsoft.com/en-in/windows7/change-which-programs-windows-uses-by-default
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program: http://support.microsoft.com/kb/950505
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
For Windows XP: 322756 (http://support.Microsoft.com/kb/322756/fr/)
For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
Response with the State of the question and we will be happy to offer you our help.
-
I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help
He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer
-
Hello. First post, so please be nice. Running into errors of hella tried different methods to run this script:
$cloneparams = "c:\scripts\clone-parameters.csv".
$cloneparams import-csv - useculture | %{
Get-oscustomizationspec $_. "" customization ". Get-oscustomizationnicmapping | »
game-oscustomizationnicmapping - ipmode UseStaticIp - ipaddress $_.ip - subnetmask $_.subnetmask - passerelle_par_defaut $_.gateway
new-vm - vmhost $_. "' $vmhost '-name $_. "" vm_name "-location $_. "" folder "-model $_. "" resourcepool-$_ template_name. "" resource_pool "datastore-$_. "' datastore_name ' numcpu-$_. "" numcpu "memorymb-$_. "" memoryMB ' oscustomizationspec-$_ .customization - confirm: $false - runasync
}
The error looks like this:
New-VM: all parameters can be resolved by using the specified named parameters.
C:\scripts\clonescript.ps1:14 char: 7
+ new-vm < < < <-vmhost $_. "' $vmhost '-name $_. "" nameyname "-location $_. "" folder "-model $_. "" resourcepool-$_ template_name. "" resource_pool "datastore-$_. "' datastore_name ' numcpu-$_. "" numcpu "memorymb-$_. "" memoryMB ' oscustomizationspec-$_ .customization - confirm: $false - runasync
+ CategoryInfo: InvalidArgument: (:)) [new-VM], ParameterBindingException)
+ FullyQualifiedErrorId: AmbiguousParameterSet, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
The .csv has these column headings (with the appropriate values to each for a bunch of new virtual machines to create):
vm_name template_name datastore_name customization VLAN intellectual property entry door subnet mask DNS folder resource_pool numcpu memoryMB vmhost The oscustomizationspec bit seems to work, but the New - VM cmdlet is obviously not happy.
I noticed others have posted similar code that seems to work for them. All thoughts were highly appreciated.
Thank you!
You have about the New - VM cmdlet parameters that are unique to different parametersets. You cannot combine unique parameters of different parametersets.
I f you look at the New - VM cmdlet, you will notice that there are 4 available parametersets.
In your case, by selecting the parameter of the model, you fall in the 2nd set.
In the red rectangle, you see the other settings, you can select.
In your case, the parameters ResourcePool, NumCpu and MemoryMB cause the conflict.
If you want to change the distribution of CPU and memory of the model, you will need to do after the virtual machine has been created with the Set-VM cmdlet.
Similarly, you can use the Move-VM to change the ResourcePool, after the virtual machine has been created.
Pretty sweet?
-
How can I transfer Favorites from one computer to another without using the Sync feature?
I used the Belkin transfer cable that has not transferred the bookmarks. I can't find them on my C drive. I would like to manually transfer using a USB but impossible without locating the file with bookmarks.
Firefox and his favorites are on the original computer. Right now I cannot use the synchronization function, but must manually transfer the bookmarks. How to recognize in the files and copy on an external device and then transfer
See also:
You can find the profile folder of Firefox via this button on the troubleshooting information page:
- Help > troubleshooting information > profile directory: opens showing the file
- http://KB.mozillazine.org/Profile_folder_-_Firefox
See also:
-
Why can I not use the scanner function if my ink cartridges are not installed properly?
The scanner allows just as one scanner I have another product of HP that I use for my printing needs? My all in one (C4580) there is an error that indicates that the ink cartridges have not been installed correctly. I have not used this printer as printer in a long time, but use it as my primary scanner. Is there anyway I can overide the "Cartridghe Print badly installed" so I can use the scanner function? Thank you for your help
You can find information on how solve the error associated with cartridge you have about your Photosmart C4580 paper here.
With most of the printers HP if there is a visible error on the printer screen it only lets not to copy, scan or fax.
I hope this helps.
-
I bought the adobe reader from adobe but installed standard first pro. now, the 'pro' trial has expired and I can't use the "standard" functions How can I solve this in order to use Adobe Standard - one that I bought?
Hi Jodie,
There is no standard to pro versions of Adobe Reader.
You have downloaded the Acrobat version which is paid instead of Adobe Reader software.
As the trial has expired, then you won't be able to use it unless you have purchased the product.
However, you can download Adobe Reader for free using this link Adobe Acrobat Reader DC install for all versions.
Kind regards
Nicos
-
Hi all
I have a column called supplements and it has values such as
1. the payment is > 90 days
2. the payment is < = 10 days
Now, I want to use the Replace function to replace > and < to "greaterthan".
and 'lessthan' RESP, but the problem is that, in the function replace, I can give that one argument. So what I do is in the region of fx for the column
Replace (supplements,' > ',' greaterthan')
This replaces the > sign very well with string greaterthan and show me values such as
1. the payment is greaterthan 90 days
2. the payment is < = 10 days
but I want to replace < "lessthen" also, how can I do? Can I undergo two replace statements? How can replace several string or special characters for a single column?
Help, please.
Thank you
RonnyTry this
CASE
WHEN supplements LIKE ' % > %' THEN Replace(latepayment,'>','greaterthan')
WHEN supplements LIKE ' %<=%' then="">=%'><>
END -
How to connect the parallel test using the logarithmic function Teststand database result
Hello
How can I connect a test result of 4 EHR tested in parallel using the logarithmic function Teststand database
I use Labview 2013, 2013 Teststand and sequential model.
The test is performed using a single digital card (SMU-6556). The FSD 4 is connected to the port of the digital map and is tested in parallel.
Currently at the end of the test, I would have a report with all the measures, but I need 4 reports (1 report / dut)
TKS
-
How can I use the BCGTransform function to treat the 16-bit Image?
Hi ~
I use LabWindowsCVI8.5 and NI Vision to make the treatment of the Image. When I read the "IMAQ Vision for LabWindowsCVI Reference Manual", I found that the imaqBCGTransform function only supports 8-bit Image, while I do the BCG to turn on 16-bit image. Are there solutions to use the BCGTransform function to deal with the 16-bit Image? Or any other feature that could make the correction Gamma, contrast and brightness on the 16-bit Image?
Thank you very much!
because imaqBCGTransform is implemented as a lookup table, we can understand why it is limited to 8-bit images.
Now let's take a look at the definition of each of this mandate (from the NI Vision Concepts documentation):
-brightness: a constant added to the components red, green, and blue pixel of color over color, decoding of the process;
-contrast: a constant multiplication factor applied to the components of the luma and chroma of a pixel of color in color to decoding process.
-gamma correction: expand high gray-level information in an image while removing information of low level of gray. (the chapter on lookup tables gives some examples of corrections gamma)
now that you understand that this transformation is a simple mathematical function, simply calculate the correction for each pixel on your 16-bit images.
I know not the exact formula used by the imaqBCGTransform function, but you should be able to approach by performing some tests on images 8 bits with the original function... or you can make your own formula... or find one on the net... or you can ask someone at home OR you give the formula...
-
Does anyone have an example VI for using the SendInput function in User32.dll?
Hi all
I am creating a VI that creates a click of the mouse. I looked at the MSDN Web site and found that I need to use the SendInput function in User32.dll. The problem is that some of the parameters for this function are nested structures. How to use this function in a call library function node? Is there already a LabVIEW wrapper for this function?
Thank you
MechEman
I would use rather MouseEvent. I looked at my VI and it can be cleaned up a bit, but it works for what you want to do.
-
After mac os update and software reinstall now unable to use the scan function
Hello
I never thought I had to post on one of them, but it really made me. I have a Macbook and stupidly thought that I would update to the mavericks os 10.9 the other day.
I continued to be able to print once the update, but it was impossible to use the scan function. So, I removed the printer and the drivers and downloaded the new drivers which would have been compatible with os x 10.9. When I went to reinstall the printer, he couldn't locate it on the list of "available printers" - I connect using wi - fi connection at home.
The only way I could connect the printer was installed manually by entering the ip address. It was found and I print now, so I don't think there is nothing wrong with the connectivity, but a warning when you do this that says scan function does not work, and of course the scan option is simply not there.
Thought I have would bypass this using analysis of e-mail on the printer. It seemed to work fine, but when I received the email there was no attachment.
My husband is now scanning these documents to his computer (a pc) and emailing for me - is not ideal.
Any ideas on how I can fix this?
Thank you
Annie
Hi Annie,.
Here is a picture of a printer, USB cable,
Now that I know what printer we work with, I have another idea. On the front screen of the printer please press the wireless icon. There are 4 icons in the upper part, the wireless is the second from the left. In the Menu arrow until settings wireless advanced. I would like to disable IPV6, arrow down to IPV6, and then select OFF.
I saw the IPV6 interferes with the Hello Protocol several times, often time turning off this feature will solve the problem and allow the Mac to see the printer on the network. Once IPV6 is disabled try to add the printer again.
Please let me know if this solves the problem, I am eager to see this solved and you get printing and scanning of your own computer.
-
How to use the @accum function in the calculation script
Dear all.
I'm new in essbase - calculation script so don't know how to use the @accum function.
I want the aggregation value of child to parent
Hierarchy
Product
100 > Storage Dimensions marked as stored (marked as intentionally as I want to calculate the value using the calculation script)
100. 10 (+)
100-20 (+)
100-30 (+)
I'm trying calculation Script
100 = @Accum (@children("100"), jan: Feb);
It works when I use below
100 = @Accum("100-10",Jan:Feb);
Error:-number of Dimensions [1] does not match number of gen/lev [3] office [@Dim]
Don't know how I can roll up to an aggregate value of all the members of the child to the parent.
you do this more difficult it must be. If you want to accumulate up to 100 then you could just make your calc
'100 '.
but that would be only 100, to make the OU any dimension would
AGG (Product);
Or better yet
AGG (Product, Market);
-
How to use the NVL function in decoding?
Hi all
How to use the NVL function in decoding?
SELECT Decode (Sign (sum (nvl (7), 0)-nvl (sum (5), 0)), - 1, 0, (sum (nvl (7), 0)-nvl (sum (5), 0)) QTY)
of the double
Thank you
You should not do that...
Greatest (NVL (Sum (Quantity), 0)-NVL (SUM (quantity_received), 0), 0) AS qty_arrival
will do the same
HTH
Maybe you are looking for
-
When opening, why do I have a 'welcome' and page 'start '.
When I open Firefox, I get a 'Welcome' page and a Page of 'start '. What are their uses? == I opened firefox
-
Motorola defy repair in Estonia
Hello I bought a Defy of Amazon.de last November, and it worked fine until recently. But now the phone is broken, the problem of "no sound from the speaker" common. People with the http://www.motorola.ee/ seem to have nothing to do with Motorola and
-
BlackBerry Smartphones lock the keyboard
Hello I bought a used 9930 and the keyboard is locked and can not reach the seller... How can I unlock it? Thank you very much!
-
Dynamic buffers / Dialog Box with the context Menu (or list box)
Hi people,I did experiment with stamps dynaimc for awhile and I got pretty far with this topic. I can not make it work are the context menus (or list boxes) in dialog boxes. The context menu is displayed correctly in the dialog box, but there is no c
-
How to create a new editable section? Adobe Muse
Hello! I'm building a website with Adobe Muse. In the home page, I have some news, but I don't have a problem. Actually, I should add regular news on the site, but I don't want to edit the HTML code or with Adobe Muse site. I would like to create an