Why can I not use the scanner function if my ink cartridges are not installed properly?

Similar Questions

• Why can I not install photoshop addition to the cc2015.

  Why can I not install photoshop addition to the cc2015.

  "Adobe Extension Manager cannot install because it requires

  Photoshop at least version 13.0"

  Please refer to other posts on this topic, but essentially the extension manager is not recommended for 2015 of CC. You must use CC Desktop App for facilities instead.

• Why can't I use the space bar to move rectangle selection I.E. selections. With the help of a pc in WIN7

  Why can't I use the space bar to move rectangle selection I.E. selections. With the help of a pc running WIN7. The hand icon appears, but the selection disappears. reappear when the version of the space bar

  This is a normal behavior. You need not use the space bar to move a selection.  Just have the chosen selection tools and have the cursor within the selected area.  Then just left-click and drag.

• OfficeJet 4635 cancel the firmware update because my ink cartridges are for older versions of the product

  I was happy with my officejet 4635 until I clicked on ok to apply for the HP firmware update. He said that it would improve my printer. However, demand has not said that my ink cartridges may not work if I installed the update. I clicked on ok and the update has been successfully installed. Now I can't print anything because I get an error message saying the I have ink cartridges are designed for older versions of the product. I do not use the new HP cartridges because they cost too much. I used cartridges refilled abacus in Az. Phhoenix which worked fine up until I did the update of the firmware of HP. I need to go back to the old system, so I can print again. I am connected to a desktop computer HP envy running windows 8.1. I'm furious HP to try and force you to buy their new cartridges with an update of something. I think that whoever came up with this update should be fired. Any help with a solution would be appreciated.

  I was told that there is no way to undo the update of the firmware. HP did send me a few ink cartridges so I could print again, but I am still ticked about the way this has been ensured by HP. They have not told me that my old version cartridges would not more work after updating firmware. I think that it is simply dishonest on part of HP and I am sure that other customers have been captured by this update of the firmware. I am sure it was a HP effort going to force you to use their new cartridges. I'll be very careful on the acceptance of the updates from HP in the future.

• Why can I not install all the apps... Error 43

  I must say at the outset, not very good and clever... so simple English terms please guys let me try to explain my problem...

  I use an iMac, if that's the difference... I'm trying to install Adobe Illustrator through the creative cloud. (element creative cloud in applications that then gives the icon in the toolbar on the screen) when I click the icon it then tells me to updates are available, the options it gives me not allowing me to access applications or files etc. (in other words impossible to install Adobe Illustrator) is 'INSTALL NOW' or 'QUIT', I click on install now and it appears the error... "Setup could not access the critical file. Please try to reinstall (error code: 43)

  When I hit exit hoping to get access to the available downloads, she closes the creative cloud icon Manager off... now was tried for a week, this bad... do I lose my subscription

  Thanks in advance if you were able to give a sense of my question

  Hi John,.

  Please check error 201 and 205 and 206 and 207, and several mistakes U43 -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  You can also remove the creative office of cloud and it redownload here: https://creative.adobe.com/products/creative-cloud

  Kind regards

  Rave

• Why can I not install Lightroom 6 on my Mac Book Pro?

  My friend bought Adobe Photoshop Lightroom 6 as a gift. I tried to install it on my Mac. Had problems at the start to get the installer to work and then when he finally worked when I entered the serial number, it says product not authentic, but it is. It was purchased in a store with a good reputation, is in the box with the Adobe 'Authentic' hologram sticker and the disc is original (you can tell is not a forgery). I'm running on Yosemite. Any help would be greatly appreciated. My friend lives in New Jersey and I'm in the United Kingdom... which would have an impact? Any help would be greatly appreciated.

  N ° 1)

  If present, Trash Adobe Application Manager folder from Applications > Utilities .
  

  Step 2)

  Click on the link below and download Adobe Application Manager and install the same.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once the installation is complete, a niche will disappear.

  Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.

  It will launch Adobe Creative Cloud approx. leave.

  Make sure the process of Force Quit Creative cloud of Activity Monitor.

  Then try again to install Lightroom, it shud work.

• Why can I not install Firefox using more - ms?

  I use to be able to install the downloaded versions of Mozilla Firefox using a simple switch on the command line. The turnout was - ms. It was working fine, I think, version 24.0. No version after that worked. Is there a reason? It is an "easy"? I saw stuff that tells, you create a config file and add to the installation. There must be an easier way? Someone knows something that will work? Appreciate help with this.

  Download Firefox Full install all languages {web link}

• Why can't connect using the address bar, while bookmarks and search very well working conditions?

  Addresses by typing in the address bar does not at all; bottom of screen says 'Done '. But clicking on bookmarks or a search works very well.

  Upgrade your browser Firefox 3.6.24 or 8 and check

  • getfirefox.com

• Why can't I use the Enter key to access a url in the awesomebar?

  Enter the url, press on enter but nothing happens. I have to click on the Green Go arrow

  You can have an extension that is the cause. Try running Firefox in safe mode which will disable the Add-ons, this will allow you to test to see if an extension is causing the problem. To start Firefox in safe mode, click the Firefox button, and then in the submenu select 'Restart with disabled modules' help. Click OK in the dialog box first and on the second dialog box, click "continue in safe mode.

  If it works in safe mode, follow the procedure described in article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to identify the culprit.

• Why can I not install the latest updates of Adobe cc, get the message code U44M1I210

  I have 6 updates and none of them work - I have the following message:

  Update failed, impossible to extract the downloaded files. Press Retry to download again. (U44M1I210)

  Can anyone help please?

  Hello

  Please see the links below.

  • Error U44M1I210 | Install updates
  • Error U44M1I210

  Hope this will help you.

  Kind regards

  Hervé Khare

• I built a new computer, attempted to install windows xp64, and then upgrade to win8. However, my new computer will not install xp. I can't install win 7 without problem? Why can I not install my Xp?

  sabortooth 990fx mother bd.

  AMD 8 core processor

  32 g/memory

  part of /ntfs SATA hard drive.

  Fine load Win7 and will accept the victory 8 with no problems. However, I use win 7 on a different computer and nto wonted upgrade using my my old computer win xp.

  I get a stop ox0000007 (0xFFFFFADE5E0323C0, 0xFFFFFFFFC0000034, 0 x 0000000000000000, 0 x 0000000000000000)

  Note: Make sure the virses on your computer. remove any installed hard drives or hard drive controllers newley. check the hard drive to make sure it is properly configured and completed. and restart your computer.

  I've changed hard drives, re-formatted and partitioned each. Attempts to load XP always get these results. Win 7 loads without problem.

  You really have a 64-bit version of XP?

  The Windows XP installation CD does not recognize SATA drives.  You must either have a SATA drive driver on a floppy disk (floppy drive) so that you can "press F6" during installation or (b) a slipstreamed XP install CD that incorporates the driver SATA or (c) temporarily change the BIOS in legacy IDE mode, install XP and then install the SATA drivers and SATA mode (this can be a bit complicated (: link1, Link2).

• Why can I not install older versions of Adobe Acrobat Reader?

  Adobe Acrobat Reader DC could not print a PDF on my HP LaserJet 6MP printer, but there is no problem on another PC by using drive X.

  I tried to uninstall the CD player and downloaded a free download apparently XI - the only player, I could find - but the installation seems to install anything... but it says that the installation is complete.

  What should I try now?

  Player X and XI are always available for download: http://get.adobe.com/reader/enterprise/

• Very urgent - using the ISERROR function in HFR

  Hi all
  
  Its very urgent requirement for us.
  
  How can we use is the function of error in HFR.bcoz if the two values in the formula ex: has / b; a = 0, b = 0; then it shows some garbage value.i came to know that we can achieve this
  using the ISERROR function function.but i dnt know how to use it.
  
  Thank you
  Ravi

  Hello

  It can be done in this way using IfThen condition

  IfThen (IsErr ((ligne/colonne de référence), 0, (reference line/column)))

  where IfThen checks the condition

  Condition is ESTERR, it returns true when row/column reference forms, has a value of #error, so much affect you 0 (or any value you want) returns something else real calculated value of row/column of formulas.

  PS: Only the columns and rows formulas can cause #error.

  See you soon
  Vikas nasri

• I downloaded and installed Photoshop elements 11 on my new Macbook Pro.  Why can I not see my scanner (Epson Perfection 3200 Photo) of the file > Import menu?

  I downloaded and installed Photoshop elements 11 on my new Macbook Pro.  Why can I not see my scanner (Epson Perfection 3200 Photo) of the file > Import menu?

  There was no updated driver available (he says that my driver was aware), so I just deleted the scanner and the computer restarted.  When he came, the scanner has already been added again.  With great anticipation, I tried to import Photoshop... but no luck (scan was not visible).  I finally ended up calling Epson (had a lot of difficulty finding a support number) and they me finally there is no update driver for OS X 10.10 and I should like a work around using "Image Capture" application  I tried it and it works very well.

• Why can I not use hidden or display point only to store the value for insertion?

  Hi, gurus:
  
  I have a question:
  
  I implemented a form with the region of report in a page, the update works OK, but the add function has a problem:
  
  There is a column, offender_ID, which is a foreign key to another table, it must not be null during insertion. However, even I pass the ID of the author of the offence of master page when user click on the button create and he did watch in the form, it must be a text tabled for insert success, why can I not use hidden or display point only to store this value for insert? (If I use hidden or display single element insert will be successful, apex reports I tried to insert a null value for the offender_ID column.)
  
  Thanks in advance.
  
  Sam

  Hello

  There is a column, offender_ID, which is a foreign key to another table, it must not be null during insertion. However, even I pass the ID of the author of the offence of master page when user click on the button create and he did watch in the form, it must be a text tabled for insert success, why can I not use hidden or display point only to store this value for insert? (If I use hidden or display single element insert will be successful, apex reports I tried to insert a null value for the offender_ID column.)

  I think that both hidden and display elements have attributes that can cause problems because of different ways these function elements as the only non-display and feature no hidden items. The only items have a "Save Session State' yes/no 'control'? This can be a problem.

  Would you do that? Do these regular items instead and see if you can get those working. Then, we will try to change the fields back to hidden or display only.

  Howard

  Congratulations. I'm glad you found the solution.

  Published by: Howard (in training) April 11, 2013 10:26