All systems LMS out there for Business catalyst?

Similar Questions

• All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile.

  All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?

  So it's not a logins.json file?

  I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.

  You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:

  • reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
  • Delete the logins.json file in the closed Firefox with Firefox profile folder

  When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
  You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• How is it you Tube RED is 12.99 via iTunes store but 9.99 elsewhere? I will not pay 12.99 per month when it is out there for 9.99.

  How is it you Tube RED is 12.99 via iTunes store but 9.99 elsewhere? I will not pay 12.99 per month when it is out there for 9.99.

  CarCarJ,

  Multiple subscriptions are greater through the iTunes Store when bought directly.  It's probably to compensate for the commission who runs the store.

  You must of course purchase at anywhere where you feel has the best offer.

• I want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting?

  you want to create a new look for our website using Muse and move the hosting of GoDaddy for Business Catalyst. How can I publish my new Muse on exsiting URL design and change hosting? @@

  Hi love,

  You can publish your Business Catalyst, simply open your file of muse and select files-> publish.

  Please refer to this tutorial:- publish your site with Adobe Web Hosting | Learn the Muse | Adobe TV

  In addition, once your site is published, you can add your domain to your site hosted on BusinessCatalyst.

  Please refer to this tutorial to add your domain name:- http://helpx.adobe.com/business-catalyst/using/change-site-domain.html

  Hope this helps

  Kind regards

  Rohit Nair

• on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

  on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

  Let see... What do we know about your system environment:

  It's windows xp.

  If we knew more, you would probably now.

  What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

  The system restore already worked successfully in the past?

  Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.
  The scans by operating clean, reboot, test and we can fix any other issues.

• For all you lovers out there willing to lend some knowledge

  Hello!

  I shot footage using a camera slider. With every shot I took, I made sure that, when the scene that I needed was captured I used an object to block the shot with the intention to use this object to create a continuos slides/cups in another scene. The size of the object varied from shot to shot, but overall it was enough to block/end my desired image capture.

  Now that I have the images in front of me, should which way I go? Masks, followed by objects, key-frame animation? IM at a standstill.

  I tried an important framework animate one next to each other and stack on each other so a scene would slip in as the other slip out of the frame. However, my results have been very hectic.

  I just want to create a cut where all my scenes are interconnected with the slides, in the form of a continuous action. I'm sure that for all that you lovers out there this is kids play, but I'm so inexperienced... Any help in the right direction would be greatly appreciated.

  PS I have not for a fact that there is a tutorial out there in the interwebz but I just can't find. If it helps this tutorial is a scene in the Big Apple and a taxi through the screen and enter a new

  Explanation of Rick should make miracles according to how your footage is shot.  A mask just like Szalam suggested might work also.  Here's an example very little neat how it could work.  I'm sure that your shots were photographed with a lot more carefully, but I just did it using the images I had on my desk to illustrate the principle.  Here I used two shots separate cable to a bike race, but when a tree covers the bikers in the second shot, I touch up the mask path to block the bikers in the first shot, so that riders in the second shot are not like they move in a continuous track.  Unfortunately, this ins't example entirely convincing since the trees are difficult to hide quickly and it doesn't help that the two moves are different angles so the sky appears in the second shot.  But, if your shots are moving at the same speed and angle and the object that blocks the firing is not too difficult to hide then you should have a much easier time with your videos:

  (1.) I got this effect simply by animating the mask path in After Effects and the use of the tool of feather mask adjustable to control the amount of feathers mask has. Here's how it works:

  (A) use the Pen tool to draw a mask around the object you want to cover up your first scene.

  (B) use the Pen tool mask to adjust the amount of feathers on your object, especially if there is no blur of movement since the movement of the camera.  Here's a good tutorial on how to usehttp://www.video2brain.com/en/lessons/variable-width-mask-featheringsmoothing mask variable width in After Effects CS6.

  

  2.) move the points as you move through the timeline and add multiple keyframes when you change the mask to match your images:

  

  3.) finally pass the edges of the mask out of the screen so that your new scene can support.  As I said before, if your shots are moving at the same speed and angle and the object that blocks the shot is easy to mask, i.e. something geometric with straight lines like a wall, then you should have a much easier time with your videos:

  

  However, I realize that your shots can be radically different from this and you may need to use a slightly different technique.  If this is the case, thanks to upload your photos or screenshots in the post and we'll take a look.

• Edition of disorder for Business Catalyst

  Good afternoon

  When I try to publish on Business Catalyst I get the message: "access using your adobe ID has expired. Check your network connection and try again. I tried searching for this already, but did not get a clear answer. 1) 1) I am connected to the internet 2) I tried signing out and back in CC and all applications. Your help is very appreciated!

  Best,

  Alison

  Repeat these steps with a force quite CC application.

  -Disconnection of Muse > narrow Muse

  -Disconnection of the CC > Force quit/end task CC

  -Open CC > Connect > open Muse

  -Create new file > publish a new trial site

  Thank you

  Sanjit

• Error message during the download of dreamweaver for Business Catalyst Server model

  I have created several models of Dreamweaver and I get an error message when I try to upload to the server of business catalyst. I created a very simple model with the basis for this code and it will not download.

  I use Dreamweaver CC 2015.

  Here is the error message.

  Path is: /Templates/template-mar9-basic.dwt
  Models: model-mar9 - basic.dwt - error - FTP an error occurred - cannot put the model mar9 - basic.dwt. Access denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.
  Files with errors: 1
  Models: model-mar9 - basic.dwt

  Business catalyst support told me to contact the support of Dreamweaver.

  You close DW & restart your computer yet?

  Nancy O.

• I can't find a link to the partner for Business Catalyst Portal?

  I can't find a link to the portal of the catalyst for business partners.  When I login I forced to choose a site.  I need questions admin for all my sites.  How to a screen that will allow me to do.

  Hover over the logo at the top left.

• Forms styling for Business Catalyst

  I am trying to learn to style web forms created with the Business Catalyst Web Form Builder, I can copy to a site designed in Muse and publish before JC. Apparently because I designed and continue to update the site with Muse, the only way I can create and maintain the form BC function is to paste the html web form in Muse and publish in British Colombia. This means that all the form BC style must be done in the HTML side of the Muse. Here's a simple form created in British Colombia:

  < form name = "catwebformform22265" method = "post" onsubmit = "return checkWholeForm22265 (this)" enctype = "multipart/form-data" action = "/ FormProcessv2.aspx?" WebFormID = 278515 & amp; OID = {module_oid} & amp; OTYPE = {module_otype} & amp; EID = {module_eid} & amp; CID = {module_cid} ">"

  < br / >

  < table class = "webform" cellspacing = "0" cellpadding = "2" border = "0" >

  < tbody >

  < b >

  < td >

  < label for = "FirstName" > name < span class = "req" > * </span >

  < / label >

  < br / >

  < input type = "text" name = "FirstName" id = "First name" class = "cat_textbox" maxlength = "255" >

  < table >

  < /tr >

  < b >

  < td >

  < label for = "LastName" > name < span class = "req" > * </span >

  < / label >

  < br / >

  < input type = "text" name = "LastName" id = "LastName" class = "cat_textbox" maxlength = "255" >

  < table >

  < /tr >

  < b >

  < td >

  < label for "EmailAddress" = > E-mail address < span class = "req" > * </span >

  < / label >

  < br / >

  < input type = "text" name = "EmailAddress" id = "EmailAddress" class = "cat_textbox" maxlength = "255" >

  < table >

  < /tr >

  < b >

  < td > {module_ccsecurity} < table >

  < /tr >

  < b >

  < td >

  < input class = "cat_button" type = "submit" value = "Submit" id = "catwebformbutton" >

  < table >

  < /tr >

  < / tbody >

  < /table >

  "< script type =" text/javascript"src="/CatalystScripts/ValidationFunctions.js "> < / script >

  < script type = "text/javascript" >

  <! [CDATA]

  var submitcount22265 = 0;

  function checkWholeForm22265 (theForm) {}

  var what = "";

  If (theForm.FirstName) why += isEmpty (theForm.FirstName.value, "Name");

  If (theForm.LastName) why += isEmpty (theForm.LastName.value, "Last name");

  If (theForm.EmailAddress) why += checkEmail (theForm.EmailAddress.value);

  If (why! = "") {}

  Alert (Why);

  Returns false;

  }

  If (submitcount22265 == 0) {}

  submitcount22265 ++;

  theForm.submit ();

  Returns false;

  } else {}

  Alert ("submission form is ongoing.");

  Returns false;

  }

  }

  []] >

  < /script >

  < / make >

  I would like to add a clear dark black or gray border around the blank form fields and increase the width of the form field to 300 px. Can anyone help?

  Hi Chuck

  I think that this post is on the same form which you spoke to support today? and its solved now?

  Thank you

  Sanjit

• Templates for Business Catalyst

  Good evening!

  It seems that we have lost the ability to create templates of Business Catalyst in Muse.

  I went the usual route:

  1. create a page in Muse

  2. turn to "Exclude" in the menus

  3. Add HTML object to a page containing {tag_pagecontent}

  4. publish on Business Catalyst

  5. Select the page in Business Catalyst and set it to "Default Template"

  Yet once, does not work and do not know why. Someone get back to me and made me know that we have a certain web projects riding on this information.

  Happy holidays to all.

  It should always work.

  What stage does not work for you?

• File picker for Business Catalyst WebApp server-side

  When we write our own WebApps in Business Catalyst, how can we present a file selection dialog box so that the user can select a file that exists on the server and possibly download a file on the server of this same dialog box?

  Catalyst for business have their own implementation of the present in the admin WebApp UI and I wonder if we can hang on it. I guess it will be a question to include a JS file (or several files) and then a jQuery works to hang it.

  Can I use the file in British Colombia picker?

  If this is not the case, how could I go about this as I guess I would need to provide some sort of connector ASP to do the work of collecting lists of files/folders which I guess would be not possible to do.

  Brett,

  If you (or someone else) for the license of the file Explorer code, I created for use in your applications to BC happy to do. Drop me a line.

  

• Where can I get a complete online for Business Catalyst training

  Hello

  I've been using Adobe Muse and now want to start using Adobe Business Catalyst but I'm having a hard time finding a learning resource up-to-date and complete I can access online, who will teach me BC of end to end. I'm even find resources on how to integrate the Muse and British Colombia. Please can I have some advice on where I can find these online training resources?

  Thank you!

  See you soon

  TIFF

  Hi Tiff,

  Have you checked these

  support

  Catalyst for business training | Gurus of the BC.

  Course of Business Catalyst interactive video from lynda.com

• Definition of InContext Editing editable using Muse for Business Catalyst regions

  Does anyone know how to do this?

  Hi odsonvic,

  Muse does not support customer edit using InContext Editing regions in Business Catalyst. Please refer to the following topic and the idea for more information (and please add your voice to the idea):

  Muse Business Catalyst and the customer text edition

  http://forums.Adobe.com/message/4417710

  Client edition of Muse by BC, InContext Editing websites

  http://forums.Adobe.com/ideas/2084

  Best regards

  Corey

• First Freezes / crashes during import &amp; consistent - all better workarounds out there?

  Since the last CC update for the first I had the SAME problem on five different machines. During the import will freeze first, and I have to force quit smoking (mac) and reopen in order to correct. Sometimes it works, sometimes it doesn't - little matter HOW to import (media browser, file/import, and then drag from the finder etc...)

  Also, while in line first will freeze or hang on a clip and I have to save/restart so that the process pick up, where she had stopped. If I try to access the clips for confirming I'm risking clips (MP4 of C100 or of the C300) lack of large gaps in the audio.

  Finally. Once I am able to do import / in line, when editing, I'll open the files to see that many will not be load clips and show "media disconnected" when I try to play them (even if they show the poster frame when still. By opening and closing the first solved instantly.

  These questions don't are NOT material related such as the material has not changed on any computer. It is a software and it is the first which is the origin of the problem. They need to fix immediately. Our workflow is suffering of many man hours lost because of problems which do not arise until set CC to update the software.

  I tried to roll back and some questions were better, but others above were still visible. That save and reboot the software almost always solves the problem until the next time, there arises, makes me confident that it is a software problem. I ask first to do the same thing several times the same way, and sometimes it works, other is not.

  Someone has a workaround that is better than constantly economy/forcequitting/restart the software?

  OK - I figured out how to install the 2015.3 version. Under 'Find additional apps', I changed 'filter the apps' 'previous versions' and was able to select. It installs now - will update if it helps at all.