All the files are copied in public Documents

Similar Questions

• Portege 3440CT freezes after some time while the files are copied

  Hello all :)

  It seems that I have the same problem as missred in this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19232 (bottom). Unfortunately I can't answer it this is why I am writing here. The version of my laptop is 3440CT.

  My test was to make a win98 HD bootable with directory i386 on it, the start of this drive and run the Setup with winnt.exe. OK, it works, but while the files are copied after awhile it just hangs. I tried with a partition and i386 on the active system partition and with two partitions and i386 on another non-system partition. I don't have floppy or CD for the laptop drive.

  Any ideas what's happening? Is it possible to install XP on the same disk, installing XP is started from?

  Can't wait for your answers ;)

  DZI

  PS: My other tests were:
  -complete the installation of XP on another computer, then move the reader
  -Installation of XP on another computer until it resets first (after you complete composing the installation files), then move the reader
  both without success. I also changed the drive to another as I suspected it is physically damaged. Now I'm ideas ;)

  > OK, it works, but while the files are copied after awhile it just hangs. I tried with a partition and i386 on the active system partition and with two partitions and i386 on another partition system
  To me it sounds more like a HARD or RAM disk as an incorrect Setup procedure failure.

  What do you think?

• In all projects, all the files are locked (cannot change, delete, rename or move), file system is given

  Hi all,.

  Today, I started my JDeveloper and was rather surprised that I can't edit any file in any project that I opened. All files have a small lock in the upper left corner.

  Here is a screenshot of the indication.

  I use git as my vcs. Git does not support file locks, but a svn. Maybe something gets mixed upward...

  Anyway that it blocks all the files in the projects that do not use the vcs.

  Thanks and greetings

  Lukas Wagner

  What is in the .jdeveloper folder?

  I suppose that you have created a new record of system12.1.3.0.xx.xx.xxx in this way. It is save to assume that the problem was the system folder. Check out my blog https://tompeez.wordpress.com/2011/11/21/save-most-of-your-changes-to-the-jdeveloper-ide/ which give you some tips where the most change is stored. You may be able to recover the information in the record of the official languages.

  Timo

• A project that I created is no longer works.  All video clips .mpg who ask to be reimported, and when I try to import from its original folder, all the files are slim.

  I currently have iMovie 10.1.2 and OS 10.11.6.  All except a video clip in a compilation of long hours are black with an exclamation mark.  They have the error statement, that the file is missing, re-import the original source media.  The clips are all .mpg and had imported fine when I created the film project of the month of May.  When I try to use the function "Import Media" drop, and I go in the folder on the desktop files located in, all the original .mpg files are low.  The two pictures that were in the project appear on the lower part.  Oh, and I did all that stored on the cloud.  I also wanted to start a new project, part II, but all the source files show a similar dim for all .mpg files.  Apple decided not to allow the .mpg files in iMovie?  If so, what is my next step?

  iMovie accepts more mpg files. The easiest way to work with them is in the finder do a right-click on the mpg file and select "encode the selected video files. In the dialog box that appears, choose the desired conversion. The converted file appears in the import iMovie window, and you can import it.

• All the files are read-only, can not be changed

  Have all my files in the c:\ drive becomes read-only. I tried several solutions, but they always seem to be read only. I can change them and they will change back.

  Help, please!

  Bryce

  Appropriating a file or a folder

  https://TechNet.Microsoft.com/en-us/library/cc753659%28V=WS.11%29.aspx?f=255&MSPPError=-2147217396

• All the files are labeled with 7-zip, nothing won't work, how can I fix this... ?

  Everything on my computer suddenly displays a logo of 7 - Zip and windows won't open all files or programs, including the system restore... ! Nothing on the computer opens and I don't know how I can restore windows to the default settings... Can anyone help... ? Thank you very much...

  Hi Chief coder.

  1. don't you make changes before the show?

  We recommend to start your computer in safe mode and try to restore the computer to an earlier time. To do this, try the following steps.
  Step 1: Start your computer in safe mode
  a. see the description of the options course in Windows XP Startup Mode
  b. in the menu advanced startup options select Safe mode and press on enter.

  Step 2: restore the computer in safe mode
  see How to restore Windows XP to a previous state .
  b. Once you have restored the computer, restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Properties tab shows 3609 files, when you select all the files it only shows the files in 1974?

  When I right click and select Properties tab it shows 3609 files, when selecting all the files to copy shows only the files of 1974?

  Hello Tony,.

  If it is certainly a big difference, I think that for most all of this is taken up by folders and subfolders which are mainly empty place holders. Have you looked at the folder with Windows Explorer? A freeware application that can help is WizTree, it provides both a performance graphics and text of what's on your hard drive (or part of it). Can be very educational. Download here: http://antibody-software.com/web/software/software/wiztree-finds-the-files-and-folders-using-the-most-disk-space-on-your-hard-drive/ .

  Let me know if this helps you.

  Kind regards

  BearPup

• User accounts - I created a user account, but now I can't seem to find all the files that were on the pc before I put it in place... what happened to them?

  I never had an aaount usser put on the pc and had a large number of backup files.  Then I set up a new user account and it auto saet as administrator, but all the files are not there.  There is an another user account on the pc and it is called comments but the files aren't there either.  Is there a way to recover the missing data?

  Hi ColleenBrown-Hickey,
   
  Setting up a new user account does not remove the files. Search if the file is present on the computer by using Windows Search.
   
  For more information, see:
  How to search for files and folders in Windows XP

• WHY THE WINDOWS TEMP FOLDER, THE FILES ARE PROTECTED, CAN NOT BE REMOVE?

  CANNOT DELETE THE WINDOWS TEMP FOLDER ALL THE FILES ARE PROTECTED. WHY?

  You can delete all. TMP using Disk Cleanup http://windows.microsoft.com/en-US/windows-vista/Delete-files-using-Disk-Cleanupfiles.  Of course, it won't delete those in use (not more), so, be sure you have not all open programs using temporary files, if you want to get everything.  The best way to do it is to do the cleanup right after the startup of the system.  The problem with OneCare is that it doesn't give you the option to choose the files you want to delete (as fair. TMP files) - she does everything that it considers unnecessary - and it can take hours to complete because of the antivirus and anti-spyware scans it includes (which can be excluded and drastically reduce the time but it is difficult to resist doing the chore together once you're already there and ready to do maintenance work).

  While you're there, you should consider to optimize your system with http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance.

  What are two tasks that should be part of a good monthly maintenance program to keep your PC/laptop running in peak condition.  There are other steps as well, that I would be happy to break it down if you want to know - but this isn't what you asked, so I'll skip that for now.

  Good luck and I hope this helps! Lorien - a - MCSE/MCSA/network + / A +.

• Running the batch if we have all the files in the folder

  Hello
  
  I just got an odd request. My client wants to Batch Processing to run only if they receive all the files in the OpenBatch folder. An example, the SAP interface will drop each period end 50 files in the OpenBatch folder. My client say make sure the autotask is running if the number of files in the folder is 50. They do not want to look in the folder, if all the files are theyre. They don't want anything manual.
  
  I don't think that it good idea because it could extend the process of end of month, not a feature of the FDM and process Batch reports will tell you if we load the full set of files.

  You have got it.

• When I download compressed files, they go to the local > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to the local > temp location and delete the zip file?

  When I download compressed files, they go to the local level > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to local > temp location and delete the zip file? Knowing that I still have the data in the My Documents folder.

  Once they are checked, of course. If you want to keep a backup, you can move the zip file in your documents folder.

  In fact, you can delete everything in the temporary folder that is not currently in use. Best time to do this removal is immediately after the start, before launching other applications.

• All the files in the Documents are now in a big list - stripped records

  Open my library > Documents to find my entire list of files in a huge list - all the folders are gone (or hidden?).  I DO not see the files in c:\Users[user-name]\Music\iTunes\iTunes but no library > documents from windows Explorer.

  This is a setting that got screwed upward (I hope)?  Thanks in advance.

  Try right click on an empty spot inside the document library and selecting "organize by > Folder.

• I want to transfer all the files / documents, information on Windows XP or 7 or 8.

  I have some important files in the windows 95 operating system. I want to transfer all the files / documents, information on Windows XP or 7 or 8.

  How to do this.

  OT:

  Mr. Shekar Iyer

  Tuesday, October 13, 2015 12:45:15 + 0000, SI3470 wrote:

  I have some important files in the windows 95 operating system. I want to transfer all the files / documents, information on Windows XP or 7 or 8.

  How to do this.

  What version of Windows you want to transfer is irrelevant. What
  you need to do is just transfer to another computer.

  There are several approaches to do this. What is the best for you
  based primarily on the amount of data you transfer. Here are a few
  choice:

  1. transfer on diskettes.
  2. transfer to CDR or DVD.
  3. by email from the old machine, and read e-mail on the new
  one.
  4. the two computers on the network and simply copy the files on the
  network.
  5. temporarily (or permanently) install the old computer's hard
  drive in the new computer and just copy the top.
  6. use a USB

• I deleted all THE files of rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB drive. Total area of libraries: 650 GB still Get Info says I use 2 100 GB! Any ideas? Thank you.

  I have deleted all THE files in my libraries FCPX rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB external drive. The total size of my libraries is 650 GB (when I add up the individual), but when I click on read the information for the reader, it says that I use 2 100 GB! It does not show that everything is on the disk. I went in each library individually in FCPX and deleted all THE files of rendering.  Reducing the total size of several concerts, but there are still almost 1 500 GB difference.

  I tried to copy all libraries on another drive and they occupy only 650 GB (with no unidentifiable used disk space). I'm a bit confused.  Someone at - it ideas?  I would like to release 1.5 TB that starting to use the new hard disk with only 650 GB and reformat the drive, but if there is some kind of hidden, important files on the original drive as FCPX needs to work properly I won't ruin the hundreds of hours I spent on editing. I hope that all makes sense. Thank you in advance.

  I use an iMac 27 "with 3.4 GHz Intel Core i7, 8 GB of memory, NVIDIA GeForce 1024 MB graphics, OS X Yosemite 10.10.5, FCPX 10.2.2 3 TB Seagate USB 3.0 external hard drive designed for Mac and format Mac OS extended (Journal)

  That doesn't sound right. The sound of back numbers compared to what could happen.

• Windows XP SP3: Unable to start, System Restore cannot drag and drop ALL the files/folders on the desktop and applications, many unable to start, services cannot search, cannot copy or transfer the any files folders...

  After a recent power outage, my system has restarted with a weird and very common Windows problems range. The system boots fine, all my personal files/folders/apps are intact, have suddenly stopped almost all functions of applications, but many crucial functions of the Windows kernel. Everything seems to point to several Windows Services are unable to start (administrative tools on the start menu). I am running Win XP SP3 and that he was going to upgrade to Windows 7, but I wanted to backup everything in advance. As I have 29 000 hours on my C: drive and a lot of time invested in my system, files, and applications, I am extremely reluctant to risk losing my files and applications by performing any type of reinstalling Windows. Strangely, begin to almost all my apps and all my files are accessible for the most part, but I've lost the ability to drag and drop files, folders or items in a list within the applications COMPLETELY. I can't copy or paste anything, can't move the desktop icons (although I can create new files and folders). So at the moment I can't save anything or even a single file transfer to a hard drive on another storage medium. Immediate reaction: try safe mode and try the system restore safe mode has the same problems (likely due to the large number of system services that inexplicably refuses to start) and the system restore says an error window saying "system restore is not able to protect your computer at this time. try restoring the system running and restart again", which of course NEVER changes. It's the equivalent of getting a tire on your car in the middle of nowhere to find the spare tire flat and the missing Jack. I have used to be fanatical about the definition of the regular restore points, but now can not access them. I have backups of most of my personal files, but over years have lost most of the original installation CD for many of my applications (there are over 100 applications on my system) and I don't want to lose the file associations and architecture of directory tree that it took my so long to implement. I started with Win XP media center edition of first (circa 2004 or almost) and have migrated twice more of 3 hard disks and 2 computers. All this time (5 years of daily use), I have NEVER known so many malfunctions for as many Windows basic and vital functions at the same time. I tried a lot of 3rd party "windows fix - it / registry repair" apps, all have no effect. Everything I can speculate is there was some serious damage to the registry and have no idea how/why so many Services refuse to start. In MMC, more than half of the services actually start and run, the rest all give the error message "the service or dependencies is not start (error 1068).» In addition, very oddly, no. APPS or windows appear in the toolbar AT ALL, but the Quick Launch toolbar works very well, just like the tray button and start tasks (?! )!). If I reduce a window, it "disappears" (Nothing on the task bar), but I can restore it using the alt - tab keyboard shortcut to switch apps, so all applications/windows appear on the list of the Task Manager. A few apps is paralyzed bad, as the player windows media, itunes, etc. (I guess because the service windows audio can not not start), some won't start at all, but 90% of them work fine, except to try to copy or back up all files. I can create new files, however. I'm desperate to find a solution to repair XP3 Win WITHOUT losing my installed applications and files, before I try and switch to WIndows 7. Any help/suggestions/links/advice would be much appreciated. I'm an experienced user, but I've never met so many malfunctions based on the OS at a time. I, however, very painfully learned (years before that my system so complex) it's been almost a re-installation of Windows guarantees to lose my installed apps and files, the directory tree architecture associations.

  Help, please!

  I'll be honest with you - your message is so difficult to read that I don't bother to go through all that. Next time consider using white space, ball or points numbered, etc. to make your message more readable. I stopped reading after your first sentence and only scanned the rest quickly. I do not mean to hurt your feelings; just trying to help you get targeted answers you need for the future.

  The blackout has corrupted your Windows installation. Back up your data now. Since you have problems so much, it would be probably best is to remove the hard drive, put it in a USB drive enclosure and attach it to another computer to copy the data OR start the target with Linux Livecd such as Knoppix system and copy the data to an external hard drive. IOW, do not use the damaged windows to try to get your data.

  You can try a repair that will leave your programs and facility data intact, but with this widespread bribery, it is unlikely to work. However, it takes only a few minutes and is so worth a try. If the repair facility does not work there is nothing to do, but a clean install. And Yes, it will mean that over again.

  Consider buying a UPS to help prevent future damage by power outages. For a single computer, you should look for one in the area of $60 to 80. A more expensive UPS is not necessary. Another good disaster recovery strategy is to buy an external hard drive and Acronis True Image. You can image your system (and can make an incremental backup image so that your image is still current). You can apply your image and be back running that you were in relatively few minutes after a hard drive or Windows to fail.

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic!