All vsan configuration utility for flashing in vsan 6.2

shouldn't we mark drive flash as a flash capacity either from command line or any flashing utility in vsan 6.2? Is this intelligence now incorporated into the web client itself, when we select the option level capacity while creating the disk group?

You may notice in the user interface with 6.2 which drive is a capacity, which is put in cache and even mark them as local. not required for the script more

Tags: VMware

Similar Questions

  • status of landmark HP + generic host process for the + serious mistake WMI + system configuration utility + ALG pop-up messages

    I have a desktop computer, with Windows XP. He has a very good performance for 4 years. But in recent days, some of the messages appeared, and suddenly, the computer restarts. and if she did ' t restart directly, she performed very bad (gel + slowly). 6 messages appeared, they are:

    1 - generic host process for win32 services has encountered a problem
    2 - problem WMI
    3 - the system has recovered from a serious error
    4 system configuration utility
    Situation 5 - hp cue has encountered a problem
    6-application Layer Gateway service
    Help, please.

    Hi Alaa' Kabbani,.

    1. did you of recent changes made to your computer?

    2. which antivirus app do you use?

    3. What is the brand and model of your computer?

    I suggest to follow the steps below and we update on the State of the question.

    Method 1: Disconnect any new hardware

    If you have recently installed a new hardware device, the necessary driver so that the material can not be installed or the driver may be damaged or incompatible. To determine if this is true, follow these steps:

    1 unplug the appliance.

    2. restart Windows XP.

    If Windows XP starts successfully, there is a driver problem with the new material. Contact the manufacturer of the device for drivers updated to the device or to learn more about known hardware issues, so that you can reinstall the device.

    For information about how to contact the manufacturer of the device, refer to the Microsoft Web site at the following address:

    http://support.Microsoft.com/GP/vendors

    (http://support.microsoft.com/gp/vendors)

    Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

    If this method resolved the issue, you are finished. If this method does not work for you, go to method 3.

    Method 2: Disable automatic reboot in case of system failure

    If the system reboots continuously, do the following:

    1. reboot the computer.

    2. as the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

    3. use the arrow keys to select disable automatic system error rebootand press ENTER.

    4. If you receive an error message, follow these steps to search the Microsoft Knowledge Base for useful information about the error message:

    a. copy the text of the error message.

    b. visit the following Microsoft Web site:

    http://support.Microsoft.com

    (http://support.microsoft.com)

    c. type the text of the error message in the Search box, and then type the name of the product you are using, for example "Windows XP".

    d. click on Searchand try to find an article that will help you solve your problem.

    If this method worked, you have resolved the problem of your computer restarts continuously. However, you can continue to troubleshoot driver problems. See the "Symptoms" section again and determine which method to use to solve the problem.

    If this method worked, you are finished. If this method does not work for you, please try Method 3.

    Method 3: Use the known last good Configuration feature

    If you can start the computer successfully, you can use the known last good Configuration feature. This feature uses information that was saved the last time that you shut down the computer before the problems started. This feature allows to restore your registry settings and drivers to the previous information.

    If you are not completely sure what that means, don't worry. None of these reviews will damage your computer. However, you should be aware that if you do this, any changes made to your computer after the date of last known good configuration will be lost.

    If you have recently installed a driver and know a configuration problem, this method will probably work for you. Unfortunately, this feature does not solve the problems caused by missing drivers or corrupt or files.

    To use the last good known Configuration, follow these steps:

    a. restart the computer.

    (b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.

    c. use the arrow keys to select last good Configuration known (your most recent settings that worked), and then press ENTER.

    d. If you are prompted to select an operating system, use the arrow keys to select the operating system and press ENTER.

    If this method worked, your computer is restored to a good working state. You still have to investigate on what caused this problem. To do this, please see the "Next steps" section for troubleshooting resources more.

    Also refer to this link: Slow PC? Optimize your computer for peak performance

    http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=G1iW6Kb0x5J

    WARNING CHKDSK:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    If you have trouble following the suggested steps or if the problem persists, please let us know and we are ready to answer them for you.

  • L7680 all in one driver for Windows 8 Preview Release

    Is there a driver of L7680 all in one printer for Windows 8 Preview Release. The Windows 7 driver/software used to work very well for Windows 8 preview of consumer. But when I tried to install this software for the visualization of the 8 version of Windows, the installation process just hangs...

    Hi kf4bef2m,

    See the document below for win 8,

    Printers supported for Windows 8

    Win 7:

    Try using the brush included in the CD or download. Let me know what you find?

    Of the Original installation CD:

    1. Insert the CD in the drive and then cancel Setup

    2. open my computer and click right then on the CD from the drive and select open

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79354-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 2512009 & sw_lang=.

    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:

    1. type % temp % in the field of race

    2. Locate and open the folder starting with 7z (example: 7zS2356)

    3 open the Util folder

    4 open the CCC folder

    5. run the uninstall_L4 (exe or Bat)

    6. once the uninstall is complete, restart the computer

    7 run the Accessories\ System Tools Disk Cleanup

    8. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    9 download drivers and full software features

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79354-2 & CC = US & DLC = in & LC = on & os = 4063 & Product = 2512009 & sw_lang=.

    10. run the download to reinstall the printer

  • ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

    We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

    I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

    At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

    When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

    It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

    C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
    
< BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
    
< SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
    
        < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
    
        < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
    
< / SETTING >
    
< SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
    
        < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
    
        < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
    
< / SETTING >
    
< SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
    
        < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
    
        < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
    
< / SETTING >
    
< SUCCESS msg = "Successfully set BIOS config." / >
    
< information msg = 'BCU return the value' real '0' = translated = '0' / >
    
< / BIOSCONFIG >
    
C:\ >

    And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

    I have tried everything I can think of to get this to activate, including:

    • Different versions of the BIOS configuration utility

    • Remove the password from the BIOS and the application in the same order as the parameters

    • Different passwords

    • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

    I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

    I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

    Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

    P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

    This problem has now been resolved by HP.

    They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

  • Configuration window for the XP system

    Hello

    Is it possible to resize the XP System Configuration Utility window to make it possible to see the whole of the entry for 'Command' and 'place '.  What I see now is the «...» "at each end of the entry.  Thank you.

    Hello

    Is it possible to resize the XP System Configuration Utility window to make it possible to see the whole of the entry for 'Command' and 'place '.  What I see now is the «...» "at each end of the entry.  Thank you.

    No, you can not resize the msconfig window, you can resize each column by positioning the mouse on the lines in the column heading until you get an arrow with two points and then clicking and dragging.

    You can also use the system information utility (start > run > msinfo32 > OK).  Click on the + next to the 'software environment' to expand the category then click on "startup programs".  The window can be resized, or you can 'select all' and 'Print' the list of startup items or creates a file of the startup items (seehttp://www.winxptutor.com/msinfo32.htm .  (Sometimes, msinfo32 shows too many files.  (Seehttp://windowsxp.mvps.org/msinfofix.htm ).

    Or get Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx (the tab "Connection" of Autoruns is equivalent to the "Startup" in msconfig tab)

  • Dell Photo AIO Printer 962 does not. Follow the instructions in the configuration utility.

    Driver is there but does not connect. I can print alignment but not test. I tried all the suggestions, I found, but still won't work; even uninstalled and reinstalled with the CD. Follow the instructions in the configuration utility. I saw other people with the same problem. can't the difficulty of mine. It also tells the boot trying to remove the abnormal length. Xc0000005 code exception)

    Hi Ohdiane1057,

    Note: a patch is released for Dell AIO Printer 962 Photo, I suggest visit this community link provided below and try to install the patch and see if the problem is resolved.

    http://en.community.Dell.com/support-forums/peripherals/f/3528/t/19046379.aspx

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Configuration utility system is not working, how to fix this?

    original title: problem: System configuration utility is not running.what do
    Thanks for the answers to previous queries. It really helped me.

    IM using laptop Lenovo (model 775787Q), in my bar tasks is showing the system configuration utility is not running. Is there a problem if it does not work?

    Details: MSConfig > C\:Windows\system32\msconfig.exe "/ auto > System Configuration utility > Microsoft Corporation > don't DO NOT WORK
    What should I do to make it work. Please inform me of the procedure in the Vice of the step.
    Hello
    • What is you receive the exact error message?
    • What changes were made before the grant took place?
    • How long you have been facing this problem?
    You can use the following methods that can help you solve your problem:
     
    Method 1: I suggest to start your computer in safe mode and try to perform the clean boot.
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: I recommend you to run online Virus Scan to remove all infections in SafeMode with networking, as appropriate.

    Follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm

  • Updates the performance of HP Array Configuration Utility in ESXI 5?

    Is that what someone has HP Array Configuration Utility to run on ESXI 5?   Of all the post, I see that it worked under ESX but not ESX (i).   This seems to be a footnote which was offered before. Have the Array Configuration Utility to expand the disk on the fly are necessary to our data center. Should we switch to ESX 4 on all hosts.

    Current situation:

    ESXI 5 servers now running many DL380 G5 with Array P400 controllers.

    VMware vSphere 5 and 5 Vcenter

    Thank you

    Mike

    Hello

    I do not think that the vMW allows the ACU installation at all - how he would talk to the RAID card in local hardware store?

    The workaround is usually a design change. Your 'best practice' typical ESXi installation is performed in a sort of SAN, where such technology is irrelevant.

    Apart from this, you can always vMotion your virtual machines to another machine, then restart a host and boot from the Smartstart CD, where you can run the ACU.

    I certainly would not downgrade to ESX4 - it is like recommending a downgrade to Windows 2000 for the future.

  • How can I remove the HP Network Configuration utility

    I am P2Ving some HP machines and reading the posts here on how to remove most of the HP components, but I'm stuck on how to get rid of the HP Network Configuration utility program that puts the HP Network icon in the system tray.  There is a post of Guillermo Musumeci in 2007 that said using this command:

    SNetCfg.exe - v u cq_cpqteam

    to do it, but I can not find snetcfg.exe on this server.

    There is also a post of Jasemccarty in 2007 that said this keymay be the key to remove:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\

    {4D36E975-E325-11CE-BFC1-08002BE10318}\{FD0FF0D6-4876-4894-9274-258564E35C07}

    But this key does not appear in the registry on that server.  Anyone has any ideas on how to remove the last piece of a P2V-centric software HP had VM?

    Anyone know why HP makes breath difficult to remove their drivers and other components?

    Thank you

    Dan

    Open the properties of your network card (either will do)

    Go - properties and click the HP tool and select "Uninstall".

    See also http://ctxadmtools.musumeci.com.ar/HPPSPCleaner/HPPSPCleanerDownload.html for a tool to strip all HP components for you - I use it regularly after P2Vs.

  • Database Configuration utility - huray? :-/

    Hello (again, sigh).

    I want to install PeopleSoft FCM 9.1 and Yes, having no experience with the installation of PeopleSoft I decided to use the database Configuration utility, using the article provided by Nicolas Gasparotto as a guide:
    http://Gasparotto.blogspot.com/2009/12/DB-Wizard-850-for-Oracle-on-Linux.html
    as well as the Oracle Documentation. In the guide above, I should be up to step 9.

    This is the log that I get after failing to create the database:
    SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:39:29 2010

Copyright (c) 1982, 2009, Oracle.  All rights reserved.

Connected to an idle instance.

SQL> spool createdb.log
SQL> 
SQL> startup nomount pfile=$ORACLE_HOME/dbs/initFC91DB.ora
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
ORA-48140: the specified ADR Base directory does not exist [/u01/app/oracle/product/11.2.0/dbhome_1/dbs/<ORACLE_BASE>]
ORA-48187: specified directory does not exist
Linux-x86_64 Error: 2: No such file or directory
Additional information: 1
SQL> 
SQL> create database   FC91DB
  2        maxdatafiles  1021
  3        maxinstances  1
  4        maxlogfiles   8
  5        maxlogmembers 4
  6        CHARACTER SET UTF8
  7        NATIONAL CHARACTER SET UTF8
  8  DATAFILE '/oradata/FC91DB/system01.dbf' SIZE 2000M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
  9  EXTENT MANAGEMENT LOCAL
 10  SYSAUX DATAFILE '/oradata/FC91DB/sysaux01.dbf' SIZE 120M REUSE AUTOEXTEND ON NEXT     10240K MAXSIZE UNLIMITED
 11  DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/oradata/FC91DB/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT     640K MAXSIZE UNLIMITED
 12  UNDO TABLESPACE "PSUNDOTS" DATAFILE '/oradata/FC91DB/psundots01.dbf' SIZE 300M REUSE AUTOEXTEND ON NEXT  5120K MAXSIZE UNLIMITED
 13  LOGFILE GROUP 1 ('/oradata/FC91DB/redo01.log') SIZE 100M,
 14            GROUP 2 ('/oradata/FC91DB/redo02.log') SIZE 100M,
 15            GROUP 3 ('/oradata/FC91DB/redo03.log') SIZE 100M;
create database   FC91DB
*
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0


SQL> spool off
SQL> exit
Disconnected
    OK so Oracle is not available, but:
    [oracle@vm-psfin91-db InstData]$ sqlplus SYS/system@SEED as sysdba

SQL*Plus: Release 11.2.0.1.0 Production on Mon Aug 2 15:46:49 2010

Copyright (c) 1982, 2009, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options

SQL>
    The SEED is just a small database I created earlier to test connectivity between my servers - just a little crutch for me to see at least some progress. But it shows that Oralce is available, is it not?
    This who can I check/recheck?

    Looks like I'm starting to be a regular here on the forums boast help :D

    Thank you in front of me,
    Honza.

    These scripts are coming within the installation of the Application (HCM in your case) under $PS_HOME/scripts/unix, it seems that you missed this step and installed only Peopletools.

    Nicolas.

  • Configuring SSL for the server SOA

    Hi all

    I am wrkin on SOA suite 11 g. I'm tryin to implement transport-level security. All first authentication 1-way and 2-way mutual authentication. For this I have to activate the SSL for the SOA server that is managed by the administration WLS server. According to my knowledge the WLS comes with demoidentity and demotrust keystore. If I need configure SSL for server SOA do I need to create a new keystore and CA, s, or I can use keystore demo.

    Now, in case I need to create a new keystore that can I do the same thing using keytool utility. Also, is it possible to do this using keytool utility? If Yes, please provide me with some links on how to do the same.

    Thanks in advance.

    Hi Shlomit,

    If I need configure SSL for server SOA do I need to create a new keystore and CA, s, or I can use keystore demo.

    You can use the keystore Demo dev purposes, but it is NOT recommended to use demo keystore for use in production.

    in case I need to create a new keystore that can I do the same thing using keytool utility

    Yes, you can do this using the Keytool utility.

    is it possible to do this using keytool utility?

    In fact, you can generate a self-signed certificate and use it as a certification for CSR signing authority.

    Please provide me with some links on how to do the same thing

    You should get everything here-

    http://download.Oracle.com/docs/CD/E14571_01/Web.1111/e13707/SSL.htm#i1200848

    Kind regards
    Anuj

  • Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

    Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

    The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
    I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
    Sorry for the posting long but no solution would be much appreciated.

    Hi jscher2000,.

    Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

    And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
    Your expertise and your time is much appreciated.

  • trying to save bookmarks for flash drive

    I am trying to save bookmarks for flash player. I do not see "Organize Favorites" under the heading or bookmark bookmarks tools. Any suggestions?

    Organize bookmarks has been renamed to display all bookmarks in the version of Firefox 4.0.

  • Recovery CD and CD of the utility for Satellite Pro 4340

    I maybe reinstall my system soon on my 4340, but I don't have the recovery CD or utility. Can someone tell me the numbers of Toshiba for these to a 4340 running Windows 2000 Professional?

    Also, how many models in the range of 4300 is a recovery of different CD exist for? i.e. is there a recovery CD CD/utility for a 4340 and another (and therefore different numbers) for recovery for others CD 4300 series computers laptops Satellite Pro, or a recovery CD are suitable for a number of models of the 4300 series?

    My thought here is that if I set one to one laptop 4300 series different eBay - if I know that it is compatible with my 4340 I could always buy. Without this knowledge I could buy something that is not good for me. By the way, is it possible to always buy recovery CD for portable 4300 series from Toshiba?
    Any help is appreciated.

    Hello

    If you have lost your recovery CD, you can install the original OS from Microsoft. All Toshiba drivers that are on the utility CD, you can find the Toshiba site. In addition, if you want to buy an original Recovery CD Utility and you can contact the service partner.
    Exactly the information that you find on: http://eu.computers.toshiba-europe.com
    As far as I know that all recovery CD has a different number because there is produce with different languages. For example: a German restore CD got another number as Polish recovery CD.

    Good bye

  • Satellite A60-H/W configuration utility

    Hi all

    I have a satellite A60 laptop and when I try to use the Toshiba hardware configuration utility it gives a message as Terminated.Can of Module common someone please help me with as many other utilities are also not working.

    Thank you

    Hello

    Please try to reinstall TOSHIBA Hotkey Utility. Use this device to version V1.00.08SA. If there is no success reinstall also HW setup utility.

Maybe you are looking for