Allegedly Incompatible graphics 3D program - Sculptris

Similar Questions

• Satellite A300 - 20 p - BSOD if I opened graphic editing programs complex

  Hello
  I have a problem with my video card.

  After I installed Windows XP and I have taked drivers from the Toshiba site I got a blue screen some time when I try to open with complex graphics editing programs. The laptop is frozen and in the blue screen, I get this information: your video card is stack in an infinite loop and a few references to the driver card.

  Some bodies have encountered some problem? If so how can I solve this problem?

  Hello!

  First of all do what laptop do you have?

  I didn't experience this problem again, but in your case I would update the graphics driver. The latest version, you can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Depending on your model of laptop, you should also try to update the BIOS. For some laptops there are special versions of BIOS for XP, but on the Toshiba page, you can check this.
  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?

  Good bye

• Google Reader incompatible con otros programas, windows, me avisan in Quebec City pc no is encuentra vidéoconférence Google Drive, are eso? Gracias

  Google Reader incompatible con otros programas, windows, me avisan in Quebec City pc no is encuentra vidéoconférence Google Drive, are eso?

  Gracias
  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• What can I do to make the program to run in WIndows 7 it says "incompatible".

  Original title: Programs compatibility Application Applications Apps game games Legacy Crash crashes Hang Application crashes.

  I have a window 7 but a version 6.1 program does not run in it. He says it's incompatible with the program. What can I do to make the program work?

  Hi Tony,.

  For you help I would be grateful if you could answer the following question:

  What program are you trying to install?

  I suggest you to install the program in compatibility mode and check.

  Make older programs in this version of Windows

  Most of the programs created for earlier versions of Windows also work in this version of Windows, but some older programs might run poorly or not at all. If a program written for an earlier version of Windows does not work, you can try to change the program compatibility settings, by using the program compatibility problems or manually choose compatibility settings.

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the link.

  Help with Windows 7 compatibility issues

  http://Windows.Microsoft.com/en-in/Windows7/help/compatibility#T1=softwarecompat

  Program Compatibility Assistant: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Program-Compatibility-Assistant-frequently-asked-questions

  For more information, see the link

  Find Windows-compatible programs

  http://Windows.Microsoft.com/en-in/Windows7/find-Windows-compatible-programs

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius

• 2009 mac Pro turns off graphics load.

  Hi all

  My Mac Pro is a 2009 with updated firmware version to support 6-core processors clocked at 2.66 ghz. I have improved graphics, Sapphire HD 7950 / 3 gb (UEFI flashed).

  • While I use the computer for graphics intense situations (IE 3d rendering, games), the computer turns off. In order to get back to the computer, the power cord must be disconnected from the PSU. The computer then turns back on without any problem.
  • The question I have is if there is a power supply problem or not?  I put the GPU in a Windows machine and the graphics card run any graphic intense program with excellence.
  • I have reset the SMC, PRAM and looked at the newspapers, but I can't find a solution. I have currently the power supply of the machine, removed inspect the Board and clean the dust off the camera.

  Please ask for more information, you may know.

  Any help is greatly appreciated!

  Your symptom has been reported by users who have cheated on the power cords to the. Labour intensive overdraws the power available to the map, and overlap the food makes the unstable power and stops at the Mac.

  If your card has one or two 8-pin connectors, you may need more power than can be provided through two cords to the 6-pin.

• Windows chooses the wrong graphics driver

  Facts:

  I want HP dv6 laptop 7200 t I bought directly from HP.

  In the speifications, I asked a graphics card: NVIDIA GeForce GT 630 M with 2 GB of dedicated ram.

  I am using Windows 7 64 bit in English.

  Now, I didn't have much use for such a card chart until today - I installed a game and he pointed out my graphics card sucks and the game does not work well on it - he says that my graphics card is Intel HD Graphics 4000.

  I checked Device Manager and found 2 - both of the listed graphics cards graphics drivers.

  

  two of them are up to date (I took care of the nvidia Control Panel to the other, and even reinstalled it just in case)

  Assumptions:

  I'm not much of an expert in hardware, but I guess I have 2 graphics card - internal on motherboard (intel) and external (GeForce) - feel free to correct me if I'm wrong.

  And if that's the case, somehow Windows chooses to use Intel instead of GeForce.

  I also made sure of it by disabling the Intel HD Graphics 4000 of the Device Manager and my screen went black - guess that its safe to assume that indeed intel driver is in use.

  Question:

  If so far I'm supposed so maybe my question is simple - how can I tell Windows choose otherwise?

  And if I'm wrong, no doubt, I'm in a deep hole, what should I do?

  Thank you!!

  Alex

  Hey, Alex:

  The two GPU is soldered to the motherboard.  There is no graphics "card" in any portable consumer HP at the current address.

  Please read this guide to learn how to use switchable graphics with the Intel/Nvidia graphic installation program.

  http://support.HP.com/us-en/document/c03519217

  For the AMD Radeon HD 7620 G and an AMD Radeon 8770 m, please read this guide for portable computers with dual AMD GPU:

  http://support.HP.com/us-en/document/c03048333

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• 'explorer.exe sound disconnection' programs stall and the closure of his

  Explorer.exe keeps stalling my pc; I noticed that it happens when I'm playing itunes, pandora, videos to youtube and videos online at random.  Out of desparation, I restart my pc I did today, so about 10 times and each time, stop is at a standstill and the message is: wait "explorer.exe logoff sound."  I end up having to "force the reboot.  I have tried everything to uninstall what I think to be the culprit, to turning off what I believe to be the problem under 'my computer' in sounds... running full scans, defragmenting, cleaning disc, everything!  Seems legitimate Explorer.exe in Windows, but it is interfering or incompatible with another program or something.  I don't have Microsoft Security Essentials for protection.  I have Windows 7, IE9... Please help me solve this problem

  Hello
   
  Have you made changes on the computer before this problem?
  Follow the steps.
   
   
  Method 1: Check if the problem persists in safe mode.
  Step 1
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  If the problem persists not in safe mode then try to clean boot in order to verify if a third-party program installed on the computer causes the startup error.
  Step 2
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  See the link below to learn more about how to clean boot.
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
   
  Method 2
  Access the link below for more information:

  Message when you try to shut down or restart Windows Vista: "the following programs are still running: Explorer.exe playing logoff sound."
  http://support.Microsoft.com/kb/931330
  Note: The article above is for Windows Vista. It applies to Windows 7, too.

  Let us know if it helps.

• Why is creative cloud dashboard showing installed program has not been?

  I have subscription usual CC 2015, all graphic design programs installed, was great to work for more than a year - and now suddenly none of them are showing as installed in the dashboard CC. Why is this happening? How should I do?  Please don't tell me that I have to uninstall and reinstall everything

  

  Hi Juliet,.

  It is sometimes simply because of the example of .to install language, if you install the app in English and you change the language in the CC to the french desktop prefs, it will show as not installed.

  Make sure that the language on prefs Office CC is the same as the installation language:

  

  

  Kind regards

• Dear God help me! Why Adobe should turn PhotoShop into a one-program-fits-all solution?

  Hi people,

  It is a form of cry a hole deep enough... I am a professional Retoucher and Artist/Illustrator... Not to boast or waving for attention here, but I spent the last two decades at the top of my game, where using photoshop is concerned, but it seems that this comfort zone is over... I'm drowning my beloved software turned to quicksand under my feet. The very foundation of my professional knowledge has turned to despair because I don't know what to do about this!

  I was silently dying for about two months now after having upgraded from CS3 using CS5... Whenever I update, I roll with the punches. There are sometimes good things, but especially now, professionally speaking, the bells and whistles just weigh down me. Adobe moves the goal post trying to respond to casual users, while undermining the elegance of the function first in the program.

  The question that started me here today is, "removal of pixels" using the "Delete" key when in quick mask, it's driving me crazy...

  PLEEEEASE someone tell me how to disable the 'fill' dialog that appears whenever I press the DELETE key (when I'm in the quick mask).  I want to just delete the "background color" (as I've done since the beginning of time) without the dialogue that adds a new step in the process... It used to be that if I wanted a 'dialogue', I simply press 'shift + delete' (which was a PERFECT solution when I wanted more options), but now this 'shift + delete' is the default position and I don't know how to get around to keep my workflow simplified as possible... Time is money, and the madness at work is a bitter reward for the upgrade of a piece of really professional software.

  I ask Adobe, why trouble what is not broken? ... It used to be perfect... NOW I have 20 YEARS ' worth of reflexive habit creating anxiety in my workflow whenever I now try to use this database functions. It is amazing to be honest. I'm using Photoshop since version 2.5, and the point is that I used to use all Adobe graphics software programs in a concentrated state of MINDLESS... it's to say, ' without thinking '. But no more...

  What's with the constant will to these things too? Once the most elegant of all the software programs (even means Adopbe Illustrator, which reached its peak at version 6), using Photoshop today reminds me heavy Corel Draw dates back to 1989, which was so big and horrible compared to the 2 Illustrator and photoshop 2.5 in those early days... Once upon a time, you knew what the program was, and you know what you had to do the work GET done using the tools available. Now, instead of using the full extent of the program and all these "benefits" I ignore a large part of them, coz they mess HALL added things...

  I want the simplicity of 'form follows function' in the software...

  I have to ask, what's with the new 'zoom' in the PS that doesn't work the same way in other CS5 programs, which are the same as the older versions? ... It is not a bad zoom, actually it has its strong points when you used to, BUT, there is a deployment ridiculous, half-baked idea that should have been implemented across the entire suite programs prior to release. Now, I am suffering between the new zoom jerk in the PS and the traditional zoom (perfect condition) which remains in Illustrator and indesign. It's like having someone cut the grass unless you walking along minding your business.

  You want to work with 3D? ..... Why not use a 3D program dedicated to who will do the job properly and leave the retouch editing tool... I want just a chisel which has a 'Blade '... I have need a tracking radar garnished with x-rays that also allows me to see through walls when firing grenades at my woodwork. ALL I want is hardened steel, and a solid feel in my hands... The program to weaken the bells and whistles in PhotoShop. ..... . WHAT the hell is the 3D feature in Photoshop for? ... Abobe should bring back Dimensions (since nothing they have done since the abandonment of this program can hold a candle to the functionality of this EXCELLENT program niche) for TRUE 3D construction and rendered in postscript format.

  With extensive experience and skills in reference is now an inflexible "rod" down my back, when it comes to this new version. It feels like 20 years of competence goes in the toilet. And for what gain for the serious and capable user? Software and interface additions that undermine the essential power of these once wonderful programs to work effectively, is finally bold and a burden that the software itself does not have to bear.

  Does anyone think this way? Is what someone else frustrated by the bells and whistles overbearing? In my humble opinion, Photoshop has turned to sludge. Try to be all things to all people might expand the market and sell licenses, but she leads me into the wall on a daily basis... Maybe I'm just too old, but I want to get out the tools now...

  Someone please give me and answer this riddle of 'remove key '... I'm going to lose my mind do my 'job '.

  Thanks in advance.

  Sincerely,

  Charles

  Post edited by: blackdog667

  Regarding deleting key bringing up the dialog box to fill (this happens only on a layer of background BTW) - the development team implemented this way to allow the discovery of the user of the Content Aware feature - which is what you want to use for most users, when you delete a part of an image. In earlier versions of Photoshop, the delete key was located to "fill" will be background color (this also only occurs on a background BTW layer) for which he was already a shortcut (cmd + delete) who loses his reason makes the shortcut [Remove].

  Zoom behavior change was also a case of discovery of the user. It is in fact fairly intuitive if you're not used to the way inherited from the zoom. The key is to understand how the new behavior.

  Activate the zoom by clicking on the area you want to zoom in on and hold down the mouse button. When you drag to the right, you zoom in on the point where you clicked initially. When you drag to the left, zoom you out to the point where you clicked initially.

  If you decide that you still prefer the old behavior, you can disable the new behavior by selecting the Zoom tool and unchecking 'Scrubby Zoom' on the toolbar options.

  As pointed out by other users, it seems that you need to update your OS and Photoshop with the latest updates.

  Photoshop to keep updated: http://adobe.ly/PS-Up-To-Date

• Periodic complete Lock up on M9402F running Vista Home Premo 64

  I had my computer (HP Pavilion Elite m9400 desktop PC series) m9402f loaded with Vista Home Premium 64 from BestBuy a few months (mid-November) and shortly after getting it, the whole system locked on me.  I don't get the blue screen of death, instead the screen would lock just with little vertical red lines appear. Nothing would work and the only thing I could do was a "discount."  That would happen once a day, after being on for about 20-30 minutes.

  Lately but it went until 3 to 5 times a day.  It doesn't seem to make a difference in what I do, and I was never able to get the problem to show on demand.  Sometimes I will have multiple adobe programs open and it crashes on me, other times I have just opened my internet browser and it is locked.  I even got lock up on me at the user sign in screen.  There was no warning at all, so I find save me from things after each word.

  Since I got the computer for almost 3 months now, I'm on my own?  Should I send it to HP?

  Any help would be greatly appreciated

  Hi a2opinion, in your description of ' the screen would lock just with small red vertical lines appear "I think that this problem is a graphics related issue.  Outdated/incompatible graphics driver can lock up your system as you describe.  Your product info page I see your machine came with the NVIDIA GeForce 6150SE nForce 430, which is part of the motherboard.  Have you checked to see if there is a new driver available?  Peek into the device-> graphics cards Manager.  Double click on the card NVIDIA GeForce listed, select the driver tab, click Update driver and let Vista search automatically (on the internet) for updated driver software.

• Satellite A200 - 10 X not recognizing nVidia cards

  The laptop came with Vista home edition. I decided to upgrade to the Enterprise edition and all of the upgrade went well except for the disply drivers, which is in fact the most important issue for me and the reason why I bought this laptop in particular.
  I tried several drivers Toshiba Web site display, nVidia and a few independent, but they all failed to install that application installation claims pilot that there's no nVidia display adapter in my laptop.
  Excat message is "Installer NVIDIA did not all compatible with your current hardware drivers. The installation program will now stop. »

  Vista Home worked well with nVidia display, which is Go 7300, but now I'm stuck with the standard VGA on Vista Enterprise edition...
  I also upgraded the BIOS to ver 1.80 hoping he might make a diferrence, but no luck.
  I have been the net cruisng and googoling my life away for the last week trying to find a solution.
  Any help?

  I put t really see big differences between the edition of Vista family and business edition and I m 100% sure Vista home edition and Enterprise edition must be able to use the same graphics driver.
  The graphics driver who worked on the Home edition also works business Edition!

  I think that you have chosen just a bad or incompatible graphics driver.

  If you are sure that your graphics driver is a right please install the display driver from the Device Manager to 100%.
  Then choose the install from a list or a specific location called option, and you select don't search. I will choose the driver to install

  PS: Please also visit these sites driver Toshiba compatible graphics driver:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  or 3 websites of third parties such as

  www.OmegaDrivers .net
  www.laptopvideo2go.com

• A lot of problems after the update of February 11 Vista

  After February 11, day, my printer drivers disappear, I can use is more remote access Quickbooks, IE 7 freezes and my graphics, crash programs or refuse opening the files.  What the devil did this update?  By Cisco (remote access) tells me that there is nothing they can do, that recent update of Microsoft took my computer that is incompatible with their program and they suggest to change to Windows XP. Why, why, why Microsoft? Y at - it solutions?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!