Allow default scrolling

Similar Questions

• Web pages are missing their default scroll bars - help

  Web pages are missing their scroll bars.

  To be clear, I can create scrollbars for any item

  in a page, no problem.

  It is that each pg itself which, by default, should come with its own scroll bars does not.

  So if a Viewer can't see the entire page the viewer has no way of

  horizontally or vertically, scroll to see the part off the screen of the page.

  I speak to support adobe technique pages without scrolling.

  They said that the problem is beyond their expertise, and is located in the code itself.

  They advised me to you lean on this platform for the response.

  The problem is consistent on all browsers.

  I ran through Dreamweaver browsers lab pages. Pages varied slightly with each

  Browsers, overall seemed well. BUT a part of the image on the right side

  has been cut and the scroll bars were not available on the page of the Adobe browser Test Lab.

  No errors not found when through compatibility with browsers to Dreamweaver.

  I saw the code, but I have no idea what I'm looking for.

  See for yourself, with no scrollbars Web site: voicesforthearts.com

  Howard Blume

  [email protected]

  Max os x system10.6.6

  5 Dreamweaver

  In your CSS, remove position: fixed body and the #wrapper rules.

  Why do you use position: fixed? What you're trying to achieve?

• allowing smooth scrolling

  Hello

  I've noticed on several devices (ios, android), that scrolling is very 'hard', I mean, it stops whenever I slip my fingers. Is there something to smooth the parchment?

  For iOS devices, ensure that your scrolling containers are decorated with the following:

  -webkit-too-full-scrolling: touch;

  Who will activate the scrolling to inertia and feel like a native scroll. Just be careful with the length of your lists and how many event handlers that you got saved (use delegation rather event!), otherwise scroll can still be janky.

  For Android, what devices and OS version (s) do you use? Table of concordance that you use?

• Scroll/overflow for QML Pages?

  Someone ask about the nature of each component QML.

  I assumed that the stacking of components (ImageView, label, text box, etc) with a direction from top to bottom will cause finally the page scroll vertically.

  However, in my case, I created a page with a Page element, and then the container, then ImageView with an image that takes about half of the screen. I then added TextArea component with several paragraphs of text. But it seemed to crush my image vertically is not proportional and distorted. I think he did this to fit everything on the screen as now the TextArea cut just before my bar tabs at the bottom.

  But shouldn't the TextArea component extend far the text ends, and the entire page should scroll to the user? By coincidence, my goal is to keep the TextArea how it is and scroll independently with a smaller space occupied. But the fact is, I don't know why the image at the top was crushed to do this. I solved the problem with setting image resizing, but shouldn't have an overflow and allow default scrolling upright?

  Sorry if this is an obvious answer, but I'm still getting used to the Cascades. Thank you.

  Actually I don't expect a Page to scroll unless I told you to scroll. Just different ways of seeing things, I guess.

  There is a distinct element of ScrollView, so you could add to the page and insert your content in the ScrollView. Maybe you could try that?

• How can I speed up my middle mouse button scrolling?

  When I try to scroll down using the middle mouse button, it goes so slow I can't, so I use the scroll bar to the right. It's embarrassing for me. When I reset the button of the mouse on my windows to multiple lines, it allows to scroll too fast for my docs, but does not affect the scrolling in FireFox. I have looked for tools and options for this and cannot find anything to do about it.

  You can try to change one (or two) of these hidden parameters:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the wheel and take a break while the list is filtered

  (3A) double-click the preference mousewheel.default.delta_multiplier_y and type a higher value to each movement of the wheel to cover more ground. For example, you can try 300 or 500. You can keep this tab open and to experiment with scrolling in a different tab until you find a value that gives you the speed you are looking for.

  (3B) double-click the preference mousewheel.system_scroll_override_on_root_content.vertical.factor and type a higher value. For example, try changing from 200 to 500. You can keep this tab open and to experiment with scrolling in a different tab until you find a value that gives you the speed you are looking for.

  I'm not sure I understand the reason why there are two such similar tariff preferences. One of them do you want?

• need to turn off the speed slider/shadow that appears on the right side of the screen when scrolling through a document

  I'm operating Vista Ultimate with 64-bit system. This happens in all the applications I use.  I will allow me to scroll through 15 to 20 pages until I can stop and then need to find the orginial page, sure I was.  I don't know what o call it.  Tried to review several books in the borders and Barnes and noble but nothing helped.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  If you have a wheel mouse, Windows Vista default scroll 3 lines in a document, Web page, etc., at a time when you scroll the wheel upwards or downwards.

  Send instructions on changing the properties of the mouse. Under "Vertical scroll", choose whether or not to scroll a few lines at a time or a full page at a time. It is best to scroll one full page at a time, if you work with very large documents.

  If you scroll through a number of lines at a time, check the box under "The number following lines both" to change this behavior. 1 line is slow scrolling; 100 is the fastest.

  You must change the mouse settings by following the instructions below that will help you solve the problem.

  To change the mouse wheel works

  1. open the mouse by clicking the Start button, click on the Control Panel, clicking hardware, and then clicking on the mouse. 2. click the wheel tab and then do one of the following: To set the number of lines that the screen will scroll for each notch of mouse wheel movement, click on the next lines in both number and then enter the number of rows you want to display in the box. To scroll an entire screen of text for each click of the mouse wheel, click one screen at a time. If your mouse has a wheel that supports horizontal scrolling, in the tilt the wheel to scroll the number of characters in a time zone, enter the number of characters you want to scroll horizontally when you tilt it flying to the left or to the right.

  Click on the link below for more information on changing the settings of the mouse.

  http://windowshelp.Microsoft.com/Windows/en-us/help/efd700f8-bbc0-4F04-9f78-3bdb4bbf47011033.mspx#ESF

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Help displaying the png files that require a picture scroll/zoom and sufficient quality.

  We try to bring a very simple application to android/iphone to blackberry.  The app is simply a tool that allows the user to navigate and view files png which are pages in a reference manual.  On iphone/android, we used the webviewer to view images.  The images range from 500 to 900 1500 x 900 x.  Everything works fine on android/iphone. We tried the same thing on the blackberry (curve, storm, torch: 5.0, 6.0), but the Blackberry BrowserField does not scroll horizontally when the image is zoomed.  We also tried to use ZoomScreen, but the image quality is so poor that the manual pages are unreadable.

  Anyone has a suggestion for how we can achieve a functional viewer of these images which allows Zoom/scroll and provides a good readable image quality?

  Dave

  Welcome to the forums!

  When you create the screen to which you add your images, you use all the constants style? What type of screen you are using?

  The reason why I ask, is that you seem to use screen which, by default, scroll vertically but not horizontally. To remedy this situation, create it like this:

  Display myScreen = new MainScreen(VERTICAL_SCROLL |) HORIZONTAL_SCROLL);

  or, if extend you it, put something like this as the first line of your screen manufacturer custom:

  Super(VERTICAL_SCROLL |) HORIZONTAL_SCROLL);

• Images that exceed the width of the site without scrolling?

  Is it possible to place some graphics/images, beyond the width of the site, while it appears on the screens without activating the scrolling?  As a way to change the image of a picture of "background"?

  The browser seems to allow to scroll to the 'include' images.

  Default browser will add scroll if content extends outside the framework, that in his State, but you can customize it and remove all the appearing on the page scroll bars.

  http://www.qooqee.com/Adobe-Muse-freebies?product_id=128

  Thank you

  Sanjit

• Why my scrolling text Ticker prevents the disappearance?

  Hi all

  I'm creating a wallboard as program that uses XMLSocket to connect to a server which ensures the pumping of XML data on a specific port.

  My Flash program connects to this server and depending on the value of which is in the current extracted XML data where the 1/Root-node is = to

  "< FRAME >", and the value it is looking for "screenToDisplay", it displays this screen...

  But when my flash program sees a code snippet XML of the code where the 1/Root-node is equal to "< TICKER >" it captures the data in the XML data

  and use it to display a message "ticker-like" scrolling on the screen.

  Everything seems to work perfectly except the ticker when he received the "< TICKER > ' data it starts scrolling the text, I gave it through the" "

  screen. The problem is that the ticker scrolls for exactly 21 seconds, then completely, he disappears for 11 seconds, then comes back again for another 21

  and so on until I have stop the movie... I thought was happening randomly at first, but then I used a stopwatch and tried about 10 different time timing it

  every time and I get the same numbers every time...

  My Flash program has only 6 slides. 5 of them display data and the other is just a title page (* which is the first one you see). The program also

  has 3 layers. He has a background layer, a layer containing ALL the TextFields which display the XML data and finally there the Ticker layer which

  spans the entire length of the film and contains a dynamic TextField and extending over the entire length of the film it will display the Ticker TextField on

  all of the images.

  It was suggested to me to try to embed the fonts in the TextField of the Ticker, but that has not changed anything...

  I wonder if I'm using the correct EventListener for the ticker. It uses the event 'Event.ENTER_FRAME' ?

  Here is my Actionscript Code (* in AS3):

  I removed a bunch of stuff to bear the code below, when I copied it on to try and save space. But all my functions/EventListeners are present

  in the code.

  * I tried to turn all of my Blue observations so that the code is a little easier to read. I'm usually one involved heavy so I thought that this color

  thing would be useful to the readability of the code...

  In "BOLD", everything is for the Ticker:

  import flash.events.IOErrorEvent;

  to import flash.events.ProgressEvent;

  import flash.events.SecurityErrorEvent;

  import flash.events.DataEvent;

  import flash.text.TextField;

  import flash.sampler.Sample;

  Create Variables to capture the data of each incoming the XMLSocket node:

  * These vars will serve as data for specific TextFields on specific frames...

  var screenToDisplay:String

  Variables 'Frame_1 ':

  var foobar_1

  Variables 'Frame_2 ':

  var foobar_2

  Variables 'Frame_3 ':

  var foobar_3

  Variables 'Frame_4 ':

  var foobar_4

  Variables 'Frame_5 ':

  var foobar_5

  Declare Variables for the Ticker:

  var ticker_speed:int = 3;           //Will control the speed of the Ticker - default speed is "3"
  

  var ticker_data:String = "";                    //This is the message that scrolls

  var ticker_startTime:String = "";      //Time to start the Ticker

  var ticker_startDate:String = "";                //Date to start the Ticker

  var ticker_endTime:String = "";           //Time to stop the scrolling of the Ticker

  var ticker_endDate:String = "";           //Date to stop the scrolling of the Ticker

  var current_date:Date = new Date();       //Current date and time

  Create the new XMLSocket object

  Socket var = new XMLSocket();

  Declare "XMLSocket" EventListeners:

  socket.addEventListener (Event.CONNECT, connectHandler);

  socket.addEventListener (Event.CLOSE, closeHandler);

  socket.addEventListener (DataEvent.DATA, dataHandler);

  socket.addEventListener (IOErrorEvent.IO_ERROR, ioErrorHandler);

  socket.addEventListener (ProgressEvent.PROGRESS, progressHandler);

  socket.addEventListener (SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);

  Declare EventListener "make":

  WBDMovie.addEventListener (Event.RENDER, renderFrame);

  Declare EventListener for the Ticker:

  WBDMovie.Ticker_TextArea.addEventListener (Event.ENTER_FRAME, scroll_ticker);

  These 2 lines will make the Flash movie go to Frame_6 and stop.

  * Frame_6 is the page of "TITLE", i.e. 1 screen/Frame you will see.

  Stop();

  WBDMovie.gotoAndStop (6).

  Connect the plug on the specified server:

  success of the var = socket.connect ('192.168.x.xxx', 3333);

  FUNCTION: dataHandler() - this function/EventListener is executed whenever the data is received through the XMLSocket

  function dataHandler(e:_DataEvent):void

  {

  Create a NEW Type of Variable XML called "xml":

  var XML = XML (e.data);

  Send the xml variable to a string Variable

  var xmlString:String = xml.toString ();

  Divide the variable xmlString on returns to the line in a table Variable

  var xmlArray:Array = xmlString.split ("\n");

  The first element of the array in the value of the Var ROOT_NODE

  var ROOT_NODE:String = xmlArray [0];

  If the socket.connected is TRUE

  If (socket.connected)

  {

  If (ROOT_NODE is "< FRAME >")

  {

  Reset "screenToDisplay" for nothing:

  screenToDisplay = "";

  Sets string to the frame/Slide-name: * that is "Screen2Display".

  screenToDisplay should ALWAYS be the first NŒUD in an XML message, so we enter that manually

  screenToDisplay = xml. MESSAGE[0].@TEXT;

  / / What makes the 'invalid' current image, which will do so with "Re-make".

  Issue this command once before the switch statement

  trace ("* call stage.invalidate");

  internship. Invalidate();

  Swith: * use this switch statement to find which frame/screen to display using the var 'screenToDisplay '.

  Switch (screenToDisplay) {}

  GoTo-> FRAME_1:

  case 'Frame_1 ':

  WBDMovie.gotoAndStop (1);

  break;

                  //GoTo ---> FRAME_2:

  case 'Frame_2 ':

  WBDMovie.gotoAndStop (2);

  break;

                  //GoTo ---> FRAME_3:

  case 'Frame_3 ':

  WBDMovie.gotoAndStop (3);

  break;

                  //GoTo ---> FRAME_4:

  case 'Frame_4 ':

  WBDMovie.gotoAndStop (4);

  break;

                  //GoTo ---> FRAME_5:

  case 'Frame_5 ':

  WBDMovie.gotoAndStop (5);

  break;

  } / / END: switch (screenToDisplay)

  }

  / / Else If, the ROOT_NODE is "< TICKER >", then...

  ElseIf (ROOT_NODE == "< TICKER >")

  {

  trace ("* found the TICKER <>node *");

  Capture the XML Variables in these Vars AS3

  ticker_data = xml. MESSAGE[0].@TEXT

  ticker_speed = xml. MESSAGE[1].@TEXT

  ticker_startTime = xml. MESSAGE[2].@TEXT

  ticker_startDate = xml. MESSAGE[3].@TEXT

  ticker_endTime = xml. MESSAGE[4].@TEXT

  ticker_endDate = xml. MESSAGE[5].@TEXT

  WBDMovie.Ticker_TextArea.text = ticker_data;

  }

  } / / END: if (socket.connected)

  }/ / END: dataHandler() function

  This feature will give the "Ticker_TextArea" allows to scroll from the right side of the screen...

  function scroll_ticker(myevent:Event):void

  {

  scrolling = true;

  trace ("* in FUNCTION"scroll_ticker"*");

  WBDMovie.Ticker_TextArea.x = ticker_speed;

  If (WBDMovie.Ticker_TextArea.x <(0-WBDMovie.Ticker_TextArea.width))

  {

  WBDMovie.Ticker_TextArea.x = stage.stageWidth;

  }

  }

  function renderFrame(e:Event):void

  {

  trace ("\tIn renderFrame() for frame->" + screenToDisplay)

  Find out what screen we are displaying current by checking the Variable 'screenToDisplay '...

  Switch (screenToDisplay) {}

  IMAGE #1

  case 'Frame_1 ':

  WRITE to TextFields SPECIFIC inside--> "Frame_1"...

  break;

  IMAGE #2

  case 'Frame_2 ':

  Write to TextFields SPECIFIC inside--> "Frame_2"...

  break;

  Frame #3

  case 'Frame_3 ':

  WRITE to TextFields SPECIFIC inside--> "Frame_3"...

  break;

  Frame #4

  case 'Frame_4 ':

  WRITE to TextFields SPECIFIC inside--> "Frame_4"...

  break;

  IMAGE #5

  case 'Frame_5 ':

  WRITE to TextFields SPECIFIC inside--> "Frame_5"...

  break;

  }

  END: switch (screenToDisplay)

  }

  END: renderFrame() function of

  FUNCTION: closeHandle() - listener for when the connection is closed

  closeHandler() function

  {

  trace ("inside function closeHandler() :"); ")

  }

  FUNCTION: connectHandler() - listener for when there is a connection

  function connectHandler (success) {}

  If (success) {}

  trace ("connectHandler ()": SUCCESS\n CONNECTION MANAGER "");

  }

  else {}

  trace ("connectHandler ()": CONNECTION MANAGER FAILED\n "");

  }

  }

  FUNCTION: ioErrorHandler() - listener to find errors of e/s

  function ioErrorHandler(event:IOErrorEvent) {}

  trace ("inside ioErrorHandler() function :"); ")

  }

  FUNCTION: progressHandler() - Earphone for progress

  function progressHandler(event:ProgressEvent) {}

  trace ("inside function progressHandler() :"); ")

  }

  FUNCTION: securityErrorHandler() - Earphone for security errors

  function securityErrorHandler(event:SecurityErrorEvent):void {}

  trace ("inside function securityErrorHandler() :"); ")

  }

  Another thing, don't know if it will help but... When I run the movie in the debugger, I can see my track (de) 'renderFrame()' and 'scroll_ticker()' EventListeners and him will be

  output as follows:

  IN THE FUNCTION "scroll_ticker."

  In renderFrame()-> Frame_1

  IN THE FUNCTION "scroll_ticker."

  IN THE FUNCTION "scroll_ticker."

  IN THE FUNCTION "scroll_ticker."

  IN THE FUNCTION "scroll_ticker."

  IN THE FUNCTION "scroll_ticker."

  .. .it shows the top line (i.e.  " * IN FUNCTION"scroll_ticker"* " () about 150-160 times consecutively... ".

  If anyone has any ideas or suggestions, do not hesitate. I'm still very new to Flash and AS3, so any help would be GREATLY appreciated!

  Thanks in advance,

  Matt

  0,0 is the top left of the scene.

  but when an object is actually depends on its alignment point, too.  If you place an object at 0,0, its registration point will be at the top left of the stage.  so, if the reg point is on the right edge of the object, the object will be backstage just left.  If the point of reg to the left edge of the object (anywhere), the left edge of the object will be in the upper left laying on the stage.

  This is why I said:

  (1) just ensure, in addition to this autoSize, well aligned WEBMovie and your ticker Ticker_TextArea should work the way you want.

  (2) and make sure that the left edge is in the center of WBDMovie.
  

• Down to scroll MouseWheel works not (mwheel down)

  Pressing the buton mousewheel (mousewheel down a.k.a mwheel down) is no longer you allows to scroll up and down on the page. She used to give a small circle with a up and down you can use the mouse to control the direction of the page, but this feature is broken or no longer exists. All other features of mousewheel operate normally; as mwheel down to open a new tab from a link, or to close a tab. What happened here? I can only scroll the page by the movement normal mousewheel, using the scroll bar or the arrow keys. Where is the trail of page?

  You can check this setting in the Options/preferences:

  • Tools > Options > advanced > general: navigation: "use autoscrolling".

• Can not scroll in Firefox except when I click two times to change the size. How can I change this?

  When I open a document in my mail from GoDaddy that I accessed through Firefox (Mozilla), I have to open it; can do small; then expand until I can scroll down. Is it possible to change this? My computer is HP Envy. Thank you very much!

  Hi LuckyLady,
  Thank you for your question, I understand that you have to make the text smaller and then zoom in to enlarge until the web page allows to scroll.

  Scrolling preferences are in the Options Menu. However I also noticed that you are in an older version of Firefox. Please update to the latest version to see if the problem has been fixed in the latest version. Update Firefox to the latest version

  Please post back with your results, it can help other users.

• Cannot select text and scroll down on any web page.

  The problem is that in Firefox, other applications work fine. I've tried reseting my computer and reset Firefox start Firefox in safe mode with disabled modules. None of these things has solved the problem. Help would be appreciated.

  Update:
  -L'OS is Ubuntu 12.04 LTS
  -The issue is not specific to Firefox, but any window full-screen (now I feel stupid for asking this question).
  -Just found this bug on Launchpad report:
  https://bugs.Launchpad.NET/Ubuntu/+source/Firefox/+bug/744580
  The problem occurs because the scrolling down is only triggered by the pointer is what past beyond the highlight box. The problem persists as long as the windows are full-screen; scrolling should occur when the pointer of the hit the lower edge of the screen, but does not work. If the window is made smaller the pointer may move beyond its edge and allows to scroll down while highlighting. This isn't a real solution, but there is a patch available in the forum section linked above (see comment #8).

• Mousepad won't scroll in Firefox

  I know that this question has been asked before by others, but none of the sons had a response of work and are not likely to invite the new because they are a bit old now.

  My touchpad/mouse pad Vaio scroll in Firefox. It works in other programs (format PDF, Internet Explorer, etc.) and if a pdf document is open in a Web page in Firefox, which allows to scroll, but normal Web pages don't. The wheel on a USB mouse works fine, it's just the function of scrolling on the touchpad.

  I've updated the computer, look for the driver updates, uninstalled and reinstalled Firefox, turned the computer on and off, cleared cache etc. and practically everything I can think or saw in these forums and elsewhere, but nothing works.

  Help, please! Thank you.

  You did not mention try each of the 3 parameters for

  • UI.trackpoint_hack.enabled pref ' in topic: config/questions/900063 and (Bug 507222)

• I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

  I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

  You should be able to resize the window pop - up to enlarge.

  You allow sites resize the popup window?

• Why the "scroll" symbol does not work in Firefox Rel 6?

  When the scroll of the mouse wheel is pressed scrolling
  symbol must appear and allow smooth scroll
  Web pages. He has always worked in previous versions, still works
  in IE, my mail client, etc.

  'Use autoscrolling' is checked in tools-> Options-> advanced-> general