Allowing a button only when a tilelist contains elements

Similar Questions

• How to activate a button only when an item of component tilelist is selected

  Simple question, but it seems quite difficult for me. How to activate a button only when an item in a tilelist currently selected?

  For example, lets say if I have a button named button1, which is disabled by default and a tilelist component called tilelist1 that I should add in brackets the following (the enabled property of the button) code to make sure that the button is only enabled when an item in the tilelist component is currently selected but disabled when no item is selected :-

  enabled = "{}".

  Enabled = "{tilelist1. SelectedItem} ".

  that should do it, it is making an implicit comparison with null (tilelist1.selectedItem == null) which will result in a Boolean value.

  SelectedItem is null when nothing is selected, non-null when something is.

• How to fire an event with a Boolean button only when you switch on IT?

  Hi, I have a problem with my structure of the event: I use a value Boolean on/off button to launch a State (using producer consumer architecture).

  When I turn it on, my structure of event get "change value" and the code is executed.

  But when I turn it off, the loop in the code ends, but there is a problem: the event 'change of value' is activated again, and the code is run again.

  How can I avoid it? It is not 'on' or 'off' events to the event structure, only "value change.

  Here are a few screenshots, thanks in advance

  J.D.,

  Use the NewVal Terminal in the case of the event.  Who has the value of the control.  If it is true, queue the message.  If it is false, do nothing.

  Generally, it is better to have order in the case of events and to send messages to consumers through queues.  Nested loops as you seem to have can create difficult problems of what must happen when.  It is unusual for a state machine need a nested loop which requires intervention by the operator.  Without the VI all I can really say what you do, but I strongly suspect that there are way more robust and easier to do.

  Lynn

• From animated only when scrolling until container

  There is a good article about it. http://www.raymondcamden.com/2013/12/6/Delaying-an-Edge-Animate-asset-until-visible--Part-4.

  // insert code to be run when the symbol is created here
  var wasHidden = true;
  
      //http://stackoverflow.com/a/488073/52160
      function isScrolledIntoView(elem) {
          var docViewTop = $(window.parent).scrollTop();
          var docViewBottom = docViewTop + $(window.parent).height();
  
          var elemTop = $(elem).offset().top;
          var elemBottom = elemTop + $(elem).height();
  
          return ((elemBottom >= docViewTop) && (elemTop <= docViewBottom)
            && (elemBottom <= docViewBottom) &&  (elemTop >= docViewTop) );
      }          
  
      var element = sym.element;
      element = $("#graphics", window.parent.document);
  
      if(isScrolledIntoView(element)) {
          console.log('on load vis');
          wasHidden=false;
          sym.play();
      }
  
      function doStart() {
          if(isScrolledIntoView(element)) {
              if(wasHidden) {
                  console.log('Start me up ID5');    
                  sym.play();
              }
              wasHidden = false;
          } else {
              sym.stop();
              wasHidden = true;
          }
  
      }
  
      $(window.parent).on("scroll", doStart);
  
  

  But the problem is that this code does not work with edge animate CC 2014.

  Are there ideas how to adapt the code for version the most recent Dashboard animate?

  Thank you.

  Hi HayPro,

  Load you jQuery. You choose: CDN option or a folder that contains the file jQuery.

  

  This photo shows a CDN choice.

• display a region report only when is click on the link in the other report

  Hi friends,
  
  I have 2 parts of report. In my first report region I'll have a column as a link. I want to show the 2nd report
  
  region only when the user clicks on the link in the 1st region of report. There is a button in the 2nd area of report I want to show
  
  This button only when the user clicks on the link in the first report.
  
  The code of my first report is
  

  select * from tasks;

  I have a column task_id as link

  f?p=&APP_ID.:10:&SESSION.::&DEBUG.::P10_TASK_ID:#TASK_ID#

  My 2nd report code is

  select * from task_details where task_id=:P10_TASK_ID;

  Help, please
  
  Thank you
  
  TJ

  Hello

  Assuming that your users get to other pages using the tabs and that these tabs don't doSubmit() when you click it, you can create a calculation for P10_TASK_ID item, in the point of calculation "after Submit'. It would be an Expression of PL/SQL in fair value NULL

  Andy

• My Mac Pro 2009 gives me only a power button blinks when I try to turn it on.

  My Mac Pro 2009 gives me only a power button blinks when I try to turn it on. External drives turns on but not the computer or monitor. I tried holding down the power button to restart but I still get only a power button blinking and no departures. It is running IOS 10.8.5 and I use it mainly for recording and mixing of music. I use Digital Performer and, sometimes, ProTools. Nothing new has been installed recently.

  fans on, power button flashing says "not enough RAM that works correctly for starting up".

• The Back button only allows me to return a page at a time instead of select a previous page from a drop-down list. It is a real problem: someone has any ideas?

  In the previous version of Firefox, I could go back to a previous page by clicking on a part of the previous button which brought up a list of recently visited sites and clicking on one of them, might go back to this page. This installation does not seem to be available in the latest Firefox, and the back button only goes back one page at a time. It's really embarrassing, like,

    it now takes longer to get to an earlier page
    there is no visibility of previous pages visited
    any actions carried out on webpages are undone when going back through them - this does not happen when jumping back several pages in one go.
  

  It is a real problem, I used the old system constantly and cannot continue to use Firefox 4.0 unless there is a way around it.

  Use it to open the history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• Compaq 6710 b: my HP Compaq power on only when I plug in power. Don't turn on with the power button / stop!

  I have a laptop HP Compaq 6710 b... Its more than 6 years...

  The problem is really annoying... The laptop powers on only when I force taken into the spindle of the charger and the laptop works very well after that...
  But the laptop never turns on when I try to power by pressing the power button!
  I did not understand the reason why...

  Any thoughts on this problem?  Help!

  There are no settings in the BIOS that affect the use of the power button.

  The power button works at the level of the material (firmware).

  By pressing the button translates the action of the Commission of the conditions of the logic system.  There must be voltage at specific points in the power circuit. If the voltages are not present, then the power button does not work. This can be caused by a failure resistance, mlcc capacitor or a bad solder joint, if the power button has been tested and shown to work normally. Fluff even could cause this to happen. This can help out-performed by Visual inspection and using a multimeter.

• I failed repeatedly when downloading files Acrobat_2015_Web_WWMUI.exe then I tried start click on download. but after 5 times I tried, it seems now a notice like this: "Sorry, Too many download attempts: 5. you were allowed to upload only 5 t.

  I failed repeatedly when downloading files Acrobat_2015_Web_WWMUI.exe then I tried start click on download. but after 5 times I tried, it seems now a notice like this:

  "Sorry,

  Too many download attempts: 5. you were allowed to upload only 5 times.

  If you have any questions, please contact Digital River Customer Service to the " [email protected] ."

  How can I re - download the file?

  order number: 10089840159

  Have you tried to download at the bottom of link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• button is active, but only when it is visible?

  Hello

  I try to get a few buttons to work I have in a timeline. These buttons are on each other and are called to be visible only when a certain image.

  My problem is the button in the foreground is the only asset, because all the buttons are "on", even if you do not see them.

  currently buttons are on alpha.0 at the beginning. I know there's a way for them to is active only when they are visible, but I can't find the documentation.

  Does anyone know this code and how?

  I have my code began as such:

  import flash.events.MouseEvent;

  import flash.ui.Mouse;

  bfButton.buttonMode = true;

  bfButton.useHandCursor = true;

  and I also have this:

  bfButton.alpha = 0

  While the buttons go up I bring alpha 1 over a period of time, but there is a trick for visibility and I can't understand it.

  any help would be GREATLY appreciated.

  Thank you!

  You can use combinations of things.  You can use the visible property as well as the alpha property.  You can also try using the property mouseEnabled with the alpha property.  In both cases, you must put true and false if necessary while still making your alpha interpolation.

• Make objects appear on stage only when the button is clicked?

  In CS5, I want to have a frame with buttons that when clicked, reveal the different graphic symbols or clips video (I don't know what to use?). Symbols will be revealing text and graphic information and could fade when you click on, however will not move or do something else.

  1. is it better to do these graphcis and text in video clips or graphics?

  2. how they hide on the scene up to what a user clicks on a button to reveal?

  3. with the help of Code snippets, which option will do this job?

  Thank you!!!

  to turn on/off:

  yourbutton.addEventListener (MouseEvent.CLICK, f);

  yourmovieclip. Visible = false;

  function f(e:MouseEvent):void {}

  yourmovieclip.visible =! yourmovieclip.visible;

  }

• Freezing up ONLY when it is PLUGGED in, DO NOT when executing a battery

  I'm having a problem with my computer toshiba laptop.  When I plug it and use it, it freezes. After many experiments, I discovered that when I leave it unplugged and run it just on the battery, it does not freeze upwards.  Help.  This is crazy.  What would cause such a thing.  I tried other points of sale, I tried to use the power strips.  It freezes only when it is plugged.

  Hi zianez,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have other external devices connected to the computer?

  Method 1

  I suggest that you reset the parameters of power plan on the laptop to default settings, then check if it works.

  (a) open the power supply Options by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Power Options.

  (b) according to the plan that you want to change, click change plan settings.

  (c) now, click change advanced power settings

  (d) click on restore defaults for this plan.

  (e) click applyand OK

   

  Check if the problem persists.

  Method 2

  If the previous step fails then I suggest that you check in the event viewer to find out the cause of the issue and after return with details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Activate a button only if TEB has text

  I want a button to activate (or shown) only if a text input area contains text. What is the easiest way to do this?

  Have you read the blog post? You do not have an event, so the action is never executed. The success by BER uncommitted (as I explained in the table and messages) is performed only when the user decides to submit the entry (logical that it is the user who decides which entry is ready). And since you don't want to use the Submit button or / and a shortcut there is no way in Captivate to do what you want. Not even JavaScript that I think...

  Lilybiri

• Window.onbeforeunload works only when there is a return value

  The problem statement is want to run code only on browser close, refreshing the browser tab, tab close.

  Previous version of firefox used to run the code in window.onbeforeunload in all 3 events mentioned above, but now the code in window.onbeforeunload runs not on click Refresh and browser close.

  based on the discussion with the previous post, I kept back in this block. Now I am able to see the confirmation box. But now I want to execute the code only when clicked on leave of this page.can you please help on this. Thank you very much.

  An additional point is if I keep the code in the window.onunload code is not executed in the tab close and the browser, but it runs in the update on.

  Hi, I admire your persistence on this issue, but there is a bug that has the attachment that Gingerbread man named titled: "Bug 391834 - do not allow alert/confirm/prompt onbeforeunload and onunload onpagehide.

  It looks like its guests with disabilities and you try to make it work. But you also already solved this problem with a batch file in this issue https://support.mozilla.org/en-US/que.../993972?esab=a & s = & r = 0 & as = s so I this will mark as resolved.

• I have a Flash Player plugin 'on demand' that supposedly save memory by launching flashplayer only when a video is launched. It gives me an "f" in the Middle

  I have a Flash Player plugin 'on demand' that supposedly save memory by launching flashplayer only when a video is launched. It gives me a 'f' icon in the middle of the video window, which I have to type. I had no problem with it, but now it won't allow me to play the video on Vimeo, however it works very well with Youtube. I can't find how to uninstall this page in firefox. Please tell me how to correct, update or reinstall so I can watch the videos on Vimeo. I need it for professional reasons, (teaching) tomorrow!
  THX. SP
  Retina, 10.8.5, Firefox 24.0 OSX MacBook.
  Recently updated Flash and Java.
  Flip4mac and Silverlight are the current versions

  Hi sgcpenny, Flash is by far the most common plugin. I think it is unlikely that the others work on the sites where you don't want to run. It does not hurt to try the setting and see if it works for you.