HP compaq dc7700 minitowers: BIOS update exe does not work

Similar Questions

• Satellite A660 BIOS update link does not work

  Hey, I got a message today (on Toshiba tempro) that the BIOS update is available.
  Unfortunately, the link does not work.

  I hope someone reads this part of the administration of technical assistance.

  Hello

  For PSAW3E:
  http://support.toshiba-tro.de/Tedd-files2/0/BIOS-20100920154827.zip

  Run as admin.

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• HP ENVY 17-n013na: the Legacy BIOS boot option does not work

  Support dear HP team,

  I recently bought for laptop HP ENVY 17-n013na .  It came with Windows 8.1. I have to install Windows 7. Unfortunately, the legacy in BIOS boot option does not work for me. Here is detailed information:

  BIOS version: F.04 Rev 5.0

  I tried updating to the latest version of the BIOS on the Support site.

  To activate the option to boot legacy, I followed the following steps:

  • Entered, BIOS configuration utility
  • Go to the System Configuration
  • > Boot options
  • Changed the setting to the Legacy Support on " Enabled"
  • F10 - save changes & exit

  Now, after the restart, if I go once more, configuration of the BIOS Legacy Support is set to disabled. Whenever I have change to active BIOS, Save & Exit, it is up to the people with reduced mobility. Because of that I can't run the installer of Windows 7 DVD.

  Please provide any help & suggestions.

  Thank you.

  Kind regards

  Eugene

  I managed to pass in Legacy mode as follows: http://www.eightforums.com/tutorials/13326-downgrade-windows-8-windows-7-a.html

  Reset the BIOS helped: https://www.youtube.com/watch?v=6KUyZIJ0xOc

  Can close the topic now.

  Thank you.

• Explorer.exe does not work correctly.

  Hello everyone.

  My name is George Sebros and I have a Toshiba Satellite A300.
  The reason why I post this new topic, it is that I need a little help from someone who knows something about my above problem:
  One day, about 2 months ago... I turn on my Satellite A300.
  When he connected, not only none of my icons appeared but also the start menu does not...
  The only thing that appeared in a screen totally BLACK, has been my folder "Documents and Settings" which opened automatically.
  There was no way I could find neither the start menu (I mean the taskbar), or my icons...
  So, whenever I close the Documents and Settings folder that had appeared, the only thing I could see was a black screen...
  It was a kind of shock to me and I couldn't believe my eyes...

  After a few days, I tried the well-known combination "Ctrl + Alt + Delete" to see what was working and what was not.
  Then I pressed the 'FILE', then 'NEW TASK' and finally, I typed the word 'explorer' in there.
  That's all! Suddenly, all turn to normal like the day before the problem started. I was happy with it, I could use my Satellite A300 again!
  However, it is an indirect way to do my work PC!
  This means that I'm still fain to use this indirect way to make the icons and the taskbar appears.
  This means that the 'explorer.exe' does not work?
  Many programs registry I use notify me on some HKY... files that contain DATA NON. I have to let you know that the explorer.exe is located in the (empty) folders.
  It indicates that transplant programs that I use, point out the problem I have?
  Can someone help me?

  I don't want to use the safe option of FORMATTING (also known as the FORMAT).
  Thanks in advance,
  George A. Sebros

  Hello

  Seems that your Vista is confused upward
  You can try to clean the registry and operating system in order to avoid the new installation of the OS.
  Please use the CCLeaner.

  I use this tool as well for free and it cleans the registry and other files at the time.
  It really helps!

  But if the BONE still does not work properly then you should try a new installation
  Of course, this procedure is radically because the HARD disk should be formatted, but on the other hand, you will get a clean and functional BONE

• Compaq tc 4200 sd card reader does not work

  Compaq tc 4200 sd card reader does not work, bought with windows 8 is already installed, drank the card reader does not work. I'm not very computer savy so any help is the appretiated!          Thanks Lynn

  Hello:

  It is the only factor that has any chance of working.

  It works on the laptop running Windows 7.  I don't know if it will work on Windows 8.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=1847704&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_70996_1%257CswEnvOID%253D2096%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• "prism3d.exe does not work.

  What this means when a game box says "the prism3d.exe does not work.  The game is 18 wheels of steel convoy.

  Hi TomDimitroff,

  What version of Windows are you using?

  If you run Windows 7 OS (operating system), this game does not work.

  For more information about compatibility, see the link:

  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Software&p=18%20Wheels%20Of%20Steel%3a%20Convoy&v=Valusoft&uid=&l=en&pf=0&pi=0&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=32-bit

  You can try to run the troubleshooter in the Windows program compatibility and also try to manually change the compatibility settings. See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• ShellExecute. exe does not work

  ShellExecute. exe does not work

  Hello

  -Did you change on your computer due to which the question has begun?
  -Is the issue specific to a particular application?

  Suggestions for a question on the help forums

• Windows 7 VB 6.0 project exe does not work in windows XP

  Hello!

  Currently, I switched from windows Xp(sp 3) to Windows 7 (32 bit). Now, I did more recent SalesProject.exe by using Visual Basic 6.0 in Windows 7, its fine on Win work 7systems. But even SalesProject.exe does not work when I run it on Windows Xp systems. It returns error on Win Xp ' class is not compatible Automation).

  Please see the following sample code in VB6.0

  [CODE]

  Private Sub Form_Load()
                
  MsgBox ("stage 1") ' run Ok

  Dim rs as new ADODB. Recordset ' (I tried ADO 2.8 and 2.0 as) error comes on this line

  ... etc.
  End Sub

  [/ CODE]

  Any help?

  Thank you

  Hello

  Because the problem is related to Visual Basic, I recommend you post this question in the Forums of Visual Basic.

• "u3ajwry.exe" does not work on startup. What does that mean?

  I get the message 'u3ajwry.exe' does not work. What does that mean?

  There is no entry listed in the start menu to the top

  Can't see the full command and nothing happens when I double click on the edge of the column rt hand.

  Errm. Is there is no entry in the msconfig Startup tab then there is no complete command to try and see!

  If this only happens at startup, it may be in via a mechanism not covered by msconfig. "Autoruns" should be. You can download Autoruns here

  http://TechNet.Microsoft.com/en-GB/sysinternals/bb963902.aspx

  Once again, to see the full command (equivalent column is called 'Image path' by Autoruns), you may need to widen the column by dragging the right edge of its title, the mouse pointer will change when you can drag to expand

  

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• Update/install updated C3 does not work

  Update/install updated C3 does not work.

  Computer is an Apple C5 Desktop OS 10.5.8, Dual 2.7 GHz PowerPC, 3.5 GB of DDR SDRAM.

  I use applications Adobe C3, which now requires updates.  When an Adobe product needs an update, an update notification dialog box appears.  I click ok to download and install the Adobe updates to all my products.  I saw preferences indicating the C3 and a number of other applications.  I click on continue and the download begins.  Installation does not seem to happen or at least it is / was no indication except noting a percentage of completion passing.

  The problem is that this process continues and continues and continues during and in the course of every time I clicked on continue.

  When I could see the preferences once, I deselected all downloads there.  I then clicked on continue.  Unfortunately, the process has continued and continues and continues whenever I clicked on continue to download, but not to the best of my knowledge.

  There is no error message.

  This problem occurs for every download of the update.  I have to click Cancel to stop this process so that I can continue work on computer.

  Help, please.

  Bud Willner

  Many gave to the buggy auto update and go to the page updates, get them from there and run them locally.

  http://www.Adobe.com/go/gntray_dl_updates

• Re: where download update BIOS - toshiba link does not work!

  Where to download the latest version of the BIOS for U500 PSU5EE?
  On the toshiba page link does not work!

  I need the latest BIOS because I installed Windows 7 64-bit and sometimes I get BSOD and selfrestarts - event ID 41 63 task category - PC, and I discovered that there is possible problem in CPU that is not fully 64 - bit compatible and update of the BIOS might help solve this problem.

  When I click to download the link, it shows me: 404 - Not Found.

  In my view, there is a temporary server problem. Wait a few moments and try again. Sometimes it happens

• Cannot upgrade Dell E6410 Bios - Dell BIOS Flash window does not work

  Hello

  I have the old version A05 on my Bios E6410. I tried to upgrade to A06, then I´d like going to A07, A09 and then to A13, because I need the A09 installed before installing A13.

  I downloaded all the versions, but the problem is that the Dell BIOS Flash window does not start!

  I need help please

  Thank you

  Well, I follow the steps of features of this forum (http://en.community.dell.com/support-forums/laptop/f/3518/p/19413136/19971740.aspx#19971740):

  1. install UNetbootin from synaptic
  2. run and create a key USB of FreeDOS.
  3. copy the exe file to update the BIOS to USB key from inside of ubuntu.
  4 restart under the BIOS Setup and change the boot order to boot from USB
  5 start since a session live freedos.
  * The USB will offer to install freedos on your hard drive. DON'T - it's ubuntucide!
  * Do not use himem or or the other thingywhatsit of memory - just freedos directly
  6 C:
  7 dir
  8. perform the update

  And I could install the Bios Update. Now are upgraded to A13.

  Noble, something is wrong, because Windows OS, the Setup program does not start!

• Run VI Invoke node: VI works, EXE does not work?

  It is LV2009 without patches or updates. I call buffer.vi of static reference with a collection of nodes to invoke to run a VI. I don't have a very good reason for it, but don't want this code on the block diagram. I can't wait to put a lot of effort in this since I can just drag the code on the main scheme and I am sure it will work, but I do not understand why it gives me error 1000: VI not in a State compatible with this operation?

  In the EXE file, when I check the status of the execution of the buffer.vi until I say it runs, sometimes bad. Same code in VI, sometimes slow. I also tried to replace the static VI reference with a reference open VI by using the name of the buffer and received the same error message. I have the buffer VI included in the compilation under always included.

  So I was building an example of project because I didn't post all, boredom was the example ON what EXE has no error. WTF. Then I realized that I had another call from node in the boot sequence. OOPS. I put that in there thinking that the only way it would be mistake was if the VI was running before he called, in this case I wanted an abortion there. It turns out also-error (1044 locked VI) when running in an EXE file, even if this particular node using says he works with the runtime. SO, he tried to abort a VI that was not working. The initial error, 1000, just said not compatible with call node state, did not say that one.

  Yes, sorry for the trouble and thanks for the help. Maybe someday I'll understand the problem that I was led to this, guess who is the fact that I can't debug EXEs. Kind of, I think it has something to do with an XControl I always use it because they always appear as corrupted files just before that the debugger fails. Anyway, thanks again, I'll plug that into the real system and see what else does not work.