Alpha 7 R flash

Similar Questions

• Dev Alpha Red LED flashing (10111011) after update 10.0.6.545

  I upgraded my Dev Alpha 10.0.6.545 today and after the update has been done the WiFi is connected but when I tried to browse it wasn't working, so I decided to restart the device to see if, after this, it would work. When I tried to turn on the red light started flashing on the next in the sequence 10111011. I tried to repair the unit by using the Software Desktop 2.4.0 (version 16), which is the same one I used to update the Dev Alpha.

  He began to download the firmware to fix the device, but when it finished and started to install it collapsed it and wasn't moving forward for ~ 1, then I removed the unit and tried again (3 times) and it's the same thing.

  Any ideas?

  Seriously guys, 10 is my new lucky number. On the 10th try to repair it it fixed within 10 minutes.

  You must be persistent for Dev Alpha updated to work as much as I've seen it here by searching on the forums... haha

• How to preserve the glow of Illustrator in Flash

  When I pull of Illustrator with Outer Glow elements in Flash, glow looks pretty bad... many artifacts and "square" throughout the area where the glow.

  Is there a way to preserve the brilliance of high quality, I see in Illustrator, once I have imported these graphs in Flash?

  Out savings as Photoshop Gets the Nice glow, but the actual item itself does not well fit!

  Thanks for the hints!

  F

  One way is you can export to a SWF file and import this object - to preserve the effects.  You must resize the SWF, although (just set the de.width/.height properties when you include it in your code and you're missing).

  Other than that, we try to avoid any effect fantasy and, if needed, build on the assets when they are created.

  Another big that we have noticed, is that "Pass through" of PhotoShop is not the same as the use of the alpha channel in Flash/AS3 - or at least, it does not give the same visible effect.  (I think the OP was on Illustrator, but I'd bet there are similar problems with effects from other applications).

  Sorry I can't be of assistance much more :-/

• Alienware Alpha - i7 - flashing yellow - recurrence

  Hi all

  I wonder if I'll just to have to send it back, but I had problems with the Alpha under and turned off for awhile now. Every now and again he just decides not to run away and instead flashing the yellow light on and off.

  I tried the things:

  -Power Drain (when you unplug everything, press and hold the power button for a minute etc.)

  -Disconnect the power from the grid and the unit and its departure for a day

  -Try a different wall jack

  -Reinstallation of the memory and HARD drive

  -Replacement of the memory and HARD drive

  -Check all internal connections were healthy

  Various things have sometimes fixed but now it is currently unusable after that being left unplugged for a few days. 5 years is impatient to play on steam!

  flashing lights 5 this time. Cheers for any help,

  Mike

  If this continues to occur, you need to replace the CMOS battery, if you have the warranty and if the problem persists, yo can send me a PM with the serial number.

• Alienware Alpha flashing yellow lights when it is off. How to fix?

  Hello, I had problems with my Alpha recently. This problem started occurring in my 3rd week of me having my alpha (which is too bad.). When I went to turn it off or reboot the system, it would not seem to come back. I tried to use the method of draining power and eventually fix it temporarily, but the problem would be more severe and would be more difficult to turn back. Mine was flashing in a sequence of five lights flashing yellow when he tried to be turned on again. Do I have to send it back or Alienware has a solution for this?

  Sorry for the delay with my post was out and about. However, I found a surprising solution to the situation. I'm the type to brag and see how I like to compare the specifications with my "Geek" friends I like to take my alpha in their home and play a game with them. I didn't really invest in one of those alpha bags because I thought that a bag of books can do the same thing. It turns out I was wrong. My father who is tech savvy thought that we should try to take a look at the alpha ourselves. So we checked the warranty sticker for zero and he wasn't there and we proceeded to disassemble. We took out the hard drive then we went we removed the chassis. We have then the guts and everything that we've done is we wanted to make sure that everything was intact (we didn't send back see how it would be tedious and an inconvenience.). WE DID THAT PLACE ALL IN. REAR AND REMOVE THE STICKS MEMORY I went to plug it back and works perfectly well. Now, I'm typing this from two reboots of the alpha, and it seems to go a lot. I guess we'll have to see what brings the future... in any case, I'll keep the guys/girls updated you and tell you if it's worse here.

• Flash on BB10 Dev unit Alpha crashes!

  I tested the photo BB10 Dev Alpha device API, whenever you select the FLASH on the camera, it hangs, is this limited to my device or other?

  Please test this feature on your camera and get back on the result.

  Kind regards

  This is a known issue:

  https://Twitter.com/xitijpatel/status/271411654435172353

• Export FLV disappeared... need an alpha in the video for Flash channel

  Hello, I just noticed that the ability to export video files in FLV format has been removed from the AF CC 2014 version. It's very destructive for our workflow that we need the "alpha channel" of the flv for use in Flash.

  Is there a way to restore the flv export feature?

  If you need to export an FLV file, then use the previous version of the application.

  See this for an explanation of the change in FLV and F4V and workflow recommended:

  export FLV and F4V removal characteristics of Adobe Media Encoder, After Effects and Premiere Pro

  See this for an explanation of the change about H.264, MPEG-2 and WMV and for the workflow to recommend:

  using Adobe Media Encoder to create videos WMV, H.264 and MPEG-2 for After Effects

• Problems of cursor alpha in Flash CS4

  Does anyone else have problem with the cursor of the Alpha (effect of color > Alpha) don't go all the way to 0% or 100%? A lot of the time, I can get up to 99% or 1%, even if I manually enter the values in the text box with the cursor. Some of the time, it even will not take a manual entry in the text box. For example, if the cursor is set at 65%, I can enter 0%, and he'll be just fine back to 65%.

  OK, so what is happening out there is that you use the matrix math in the property inspector. The matrix is make calculations and arrives at numbers, sort of "guess" what you want in the way of interpolation with a borough and all involved. What happens much more frequently for X-values and Y and transformations such as rotation or inclination, less frequently for alpha. Why you won't see that this in the motion Editor (motion even hot text editor) is because you set the property directly.

  This isn't new to Flash, but it's something you see a lot more when you use hot text sliders you do more calculations when moving (a calculation each time), so things like rounding down value more «» We have an enhancement request always set properties directly (so), but because it would change the way all in Flash has worked since the beginning (essentially ' getting rid of the calculation of the matrix"), it's a pretty huge and risky demand would be a great to have

• default colors in flash CS4 with parameters alpha

  In Flash CS3, you can set a default color with an alpha setting.  I have not found a way to do this in CS4.  Is there a way?  Its nice to have default colors for shading that are easy to access.

  Thank you

  Is not his as we see the same thing. I can create a nuance to, say, green 50% alpha. Then create a new square and fill it with a different color to different alpha, say 100% alpha. Then I can apply the nuance, and it is the saved status green at 50% alpha.  It's true that the alpha parameter will be recalled between choice of fill color, but the shade for me is to remember the correct value.

• Photoshop CS3 is an alpha like Flash fade?

  I am teaching Photoshop and I want to fade a background texture so that it is not so "BOLD".  In Flash, I could do this with the alpha controls, but I google for photoshop alpha and it wasn't what I was looking for.  I tried to play with the partially transparent gradient, using multiple layers, but I do not receive the results of desire.

  Any suggestions would be apreciated.

  usually just, you reduce the opacity. If you're talking about erasing the background to white then do a levels adjustment layer and drag the black output slider (bottom, below the slope) to the right. You can do this by reducing the opacity, but it's a pain in the neck when you work with the background layer, because you have to open it by double-clicking it, and then add a layer filled with white and only then reduce the opacity

• Alpha ignored by the Flash CS3 text field value

  It is a problem, I noticed in Flash CS3. I checked livedocs and noted in Flash8 too:
  Comment by rainair:
  leader = 00002437.html & http://livedocs.adobe.com/flash/8/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveD ocs_Parts
  
  So, I have a clip in which I put a text field. I've done the transparent clip (setting alpha to 0) and everything is OK (the pliers and the deposited text are not visible) while I'm still working with the timeline and stage. When I test or publish the movie the text field is always visible. I have a Flash Player 9,0,115,0 installed on my computer.
  I did some tests and found that:
  If the text field is static text, it WORKS. Text field has the same alpha value as the clip that holds it.
  If the text field is a dynamic text it does not. Submitted text is visible.
  If the deposited text is entered and there is NO character to incorporate, the text field IS visible (it looks like the alpha value is 100).
  If the text field is the input text and incorporate characters, the deposited text IS NOT (as expected) visible.
  It's strange. I'd say it's a bug.
  
  BTW, it seems that you can add comments to Flash 8 livedocs (after clicking on the add comment button, you are redirected to a log in page and you can submit a comment), but when I went to Flash CS3 livedocs you can't. There is a message 'comments are no longer accepted for Flash CS3. Flash CS4 is the current version. To discuss Flash CS3, please use the Adobe forum. ». This nonsense!

  Wow, you don't need to go through this whole process just to embed fonts in a dynamic text field that is already on scene. Click the field in your text on the stage, click the character of dipping and embed the characters you need. Fact.

• Daily 5 yellow flashes Alien Alpha

  Hello

  I just got my Alpha Alien renovated taken Dell last week. At first I started it perfectly without any problems. But after that, I do power drain to start the operating system. Power Drain links below:

  en.Community.Dell.com/.../19659357

  It's quite annoying to do this routine every time I start my computer. Although it is refurbished, but it's still an article newly supplied with warranty. I read only a few positions, said that the problem could get worse. So I planned to ask experts from Dell. But I couldn't start a Webchat because of what we call 'number of invalid service", I found just below my Alpha. And I had a diagnosis online with no problem, where it can detect my (identical under my Alpha) service tag.

  If someone could help me?

  Thank you!

  Hello

  We are sorry to hear about this issue. Send me your serial number in a PM to we can look at this.

• Radio Flash for Alpha A99 and HVL-F60M wireless transmitters

  The only thing that prevents me to sell all my Nikon and Sony switching equipment is the lack of Flash in the wireless Radio transmitters that allow control of area and ratio manual, TTL and Hypersync via a radio signal. I shoot outdoors allot and communication through light as the system Nikon CLS simply does not.

  Maybe Pocket Wizard or RadioPopper will work on this soon, but I'm not holding my breath, and their range of the signal is still weak.

  I also have a repeater transmitter/receiver for the signal around obstacles.

  Sony you should do them instead. You could probably do it better anyway.

  Future gear should have built it in anyway.

  I also have a repeater transmitter/receiver for the signal around obstacles.

  Thank you

  Braden

  Thank you for your post and welcome to the forums.
  Sony can not comment on the release of future products. However, your information is valuable and your comments will be forwarded to the correct service.

  Thank you very much for your presentation.

• (Redirected) ALIENWARE ALPHA - YELLOW FLASHING

  I got my Alienware Alpha a week ago and have not had any problems. Recently, when I went to turn it on, the yellow led on the alien head continues to blink. Nothing comes on the screen and the system does not start. Help please!

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Flash alpha mapping

  I would like to create a 3-layer dynamic image that can have one of the 3 layers changed.  I was thinking of doing this with alpha mapping where I have a back, middle and front layer each defined by an alpha map.  So if the style or shape of the change I just make the texture with a new alpha card to set what part actually takes the texture.  So, for each of the 3 layers there is a type (defines the shape), texture that is applied to the shape, and an alpha map that is used to specify how the form takes the image.

  Imagine a fruit basket that can have the fruit set out or the basket and any combination of textures applied.  Potentially, we could see the inside of the basket that may have a different texture than the outside.  The fruits would all be an image would then fit in the basket, and finally the basket would make.  So if change you the color of the basket while keeping the same model it would be updated, you could swap the basket model and keep the same color.  But I don't want to do that when I have 1 texture that can fit on all baskets, but is cut off just using the alpha map.

  Thanks in advance.

  layers do not exist in SWFs so that you cannot change layer dynamically.

  However, movieclips can be placed in layers and you can dynamically change the movieclips.

  MovieClips have a graphics property to which you can apply a bitmap using the beginBitmapFill() method.  and you can create dynamically an image bitmap of what anyone in your swf file that is not already a bitmap image.

  you just need to put things together to make what you want.