already launched patch pause and resume

Similar Questions

• How to pause and resume the loop that should contineously loop runs?

  I have a request that a loop runs continuously and when I call this loop must stop iterating when I call this loop, it must return to the iteration. How I can implement?

  Can someone help me?

  You don't want to pause and resume the while loop.

  You want a part of your program to suspend and resume.

  You can make a machine to States in which break do not run your code and resume starts executing your code you are. Change of use part to hold your data.

  Another thing if you just want to implement the pause and resume you can use events with value-1 timeout and some time.

• How to pause and resume a while loop with a button

  Hi all!

  I'm back in LabVIEW, after only a few years and I cannot understand, what at first sight seems to be a simple problem!

  All I want to do is have a while loop in which, for the purposes of illustration, I have the 'random number from 0-1' function on the inside, and I want to be able to pause and resume this help from a button. There are a few other posts on the forum that are very similar and do use "event structures. The problem I encounter is that I can get the genarator random number to start the generation but the break will not stop this!

  I have the feeling that I made a stupid mistake - but I can't understand or google my way out the problem! I enclose my solution so far!

  See you soon!

  I did an example (you can drag and drop the image into a labview diagram > = 2014)

  hope this helps (I just did 2 excerpts, it's the same program)

  

  

• How to pause and resume the chronology

  HI -.
  I have a main timeline which is long some 900 images. During this 900 frames I bring in short MCs on their own layer which play their duration - (a frame 90 MC gets 90 frames in the main timeline). There is also an audio track embedded on its own layer.
  
  What I have to do, is to be able to pause and resume the main scenario - including audio and everything plays MC short.
  
  I did a PlayPause button. I do respond to an onRollOver and onRollOut onRelease (it climbs at different times within himself to change his appearance). But how can I do control the main timeline to pause and play?
  I don't know if it is useful or not, but here is the code I use.
  TIA your help,
  JL
  
  
  

  Try using _root instead of root

• How to pause and resume...

  I am creating a module and would like a pause and resume button. In this way the user looks at a module be able to suspend and then be able to click on the button to view the module where they left (similar to the Conrol + P when you CREATE a piece in Authorware). The training module will consist of a timer (wait icon), so if they do not click on the pause button it will continue on the next page.
  
  I have currently a problem to have the button resume. It is for the button back to play since, when I click on the pause button.
  If someone could help me with this, it would be a great help.

  Quote:
  Posted by: newsgroup user

  "V1ck1_D" wrote in message
  News:fcmh8g$3BC$1@forums. Macromedia.com...
  > Amy Merci for your help. It worked. But I also noticed that you
  > included
  > audio,.
  > there are more than that. I forgot to mention, but I assumed that it
  > would have stopped the audio as well.
  >
  > There was someone who posted a similar topic as mine
  > who wanted to do the same thing and noticed that you answered
  > back (audio) with this:
  >
  > "If you want to pause the media as well, you will need to put this at the top."
  > of
  > each page frame in a calc:
  >
  [> Medialist: =]
  >
  > Set this code on each icon in media (sound/film)
  >
  > AddLinear (MediaList, IconID)
  >
  > Then, before your interaction on the page to Pause, put this code:
  >
  > repeat with x in MediaList
  > If MediaPlaying@x then Mediapause (x, true)
  > end repeat
  >
  > In the infrastructure of page break output pane, you will need this
  >
  > repeat with x in MediaList
  > If MediaPlaying@x then Mediapause (x, false)
  "> end repeat."
  >
  > I tried, but it doesn't seem to work. I'm assuming that
  > This is something that I did wrong. But with the meaning given
  > above, there are all the changes need to be made when
  > I do it myself?
  >
  > If you could help me with this, I would appreciate it.

  Send me an email list
  Amy (at) authorware-amy (dot) com.

  Make the topic:

  Authorware MediaPlaying list of break room

  In this way, you don't get deleted as SPAM.

  I sent you an email earlier. If you haven't, let me know.

• Pause and resume the download after the judgment?

  Is it possible to stop the download and resume after a stop/restart?

  Download: CS6 Master Collection trial

  System: Mac OS X 10.6

  Yes.

  In Adobe Download Assistant, next to the progress bar, you will find a pause button quite small.

  If it does not automatically start, click the same button and it should begin where it left off.

• How can I pause and resume the analog output using DAQmx?

  I use a DAQ hardware to produce an analog waveform.  I would like simply to break the output of the wave and then resume where it left off.  I use DAQmx and LabVIEW 2011.

  I've seen examples that use a digital or analog break trigger, but I would take a break in the software only.  How can I do this?

  -Joe

  Hi Joe!

  I spent some time thinking about it and I realized that you can technically use a fundamental mission of the analog output, as you previously wrote that runs continuously. However, the generated output samples are controlled by the sample clock pulses, and can be manipulated to fit our needs "suspension."

  To do this, we will need another counter task that generates a pulse train (see our examples of shipping under material input and output > DAQmx > generating digital pulses > generate dig Pulse Train - Continuous.vi) that stops and starts the user to choose. This can be in another quite VI or controlled by software. We will use this as the task of our output sample clock.

  Then, the task of the AO, wire a constant to the sample clock source and select ' DevX/CtrXInternalOutput"based on the counter that you specified in the task of counter. You will need to choose "I/o name of filtration" and check the box that says "include advanced terminals' and right-click of the constant. See picture attached as a reference. In this way, the task of the AO is constantly running, but it generates only actually all data when the meter running task.

  

  Let me know if you have any questions!

  Have a great day!

• Pause and resume playback to selected poin

  Hello, is it possible / shortcut / preference you can hit to get the video you're editing from the point you selected?

  For example, I click to 1' and 32 ' and press the space bar. The video starts to play 1 ' and 32 "and I hit the SPACEBAR again and the video stops.

  When I hit the space bar, the video continues to play, he's not coming back to 1' and 32 '. Is it possible to do? Or change preferences so that it works this way?

  I find it very handy when I want to change the starting point of several clips.

  Thank you.

  There is no way to do it automatically.  You can set a marker at the starting point and manually navigate to that.

• DMA2100 pause, fast forward and resume won't work with video files.

  Hello

  I have the extender DMA2100 working with and Win7 media center movies streaming absolutely perfect.  The problem I get is when I try to pause for more than a few minutes or go out to a movie and try and resume, which until the beginning of the film! It's so frustrating to anyone can help?

  Hi Scottking69,

  There are questions about the compatibility of Windows 7 and DMA (as a few years ago). Linksys/Cisco, it has been verified that it is NOT officially supported. But some do work but not at full capacity. Hope that this would settle the question whether it is supported or not.

  See you soon!

• StripChart paused for a moment and resumed again

  Hello

  I have showing graphic problem of the band. I created the x-axis in continuous mode.

  I update data using "PlotStripChart (DisplayHandle, Chart [idx].chartCtrl, PlotBuf [idx], 2,0,0, VAL_FLOAT)";.

  He did not always but sometimes watched table break and resumed again with gaps.

  If I watched carefully, the values in the chart change very slightly. But axis label X does not change and graphic band is not moving to the left to display the new data.

  The CPU usage is looked OK. I think that it happenes more often for fixed data.

  You have no idea why this is happening?

  Thank you

  Momo

  PS. I tired the multithreaded program and abandoned due to synchronization.

  Yes, I have maximum 12 graphic strips with 2 tracks in the Panel and also have a change of function of the axis scale y.

  I agree that I've used them too.

  After simplification of the scaling of the y-axis, the behavior is much better.

  My version is CVI/2013.

  Thanks for the reply.

• How can I MOVE buttons on taskbar to a new location without having to close all programs and resume in the order I want?

  I like to keep the buttons in my taskbar has organized with the browser and messaging on the left, followed by Windows Explorer and other items. If they get out of order or programs are loaded into a different order, how can I MOVE the buttons to a new location without having to close all programs and resume in the order I want? In addition, sometimes, one of program buttons seems in itself to migrate out of place and I need to get back to where it should be: same problem.

  Hi shohareZohre

  Thank you for using the Microsoft Answers Forums!

  The task bar is the horizontal bar at the bottom of your screen time. In contrast to the office, which can get obscured by the windows on top of it, the taskbar are visible nearly all the time. It includes four main sections:

  ·         The Start button, which opens the start menu.

  ·         The Quick Launch bar, which allows you to start programs with a single click.

  ·         The middle section, which shows you what programs and documents you have open and allows you to quickly switch between them.

  ·         The notification area, which includes a clock and icons (small pictures) that communicate the status of certain programs and computer settings.

  Add or remove programs on the Quick Launch toolbar

  The Quick Launch toolbar is located on the task bar and is a convenient way to open programs. You can add or remove program icons in the Quick Launch toolbar so that you have easy access to the programs that you use frequently.

  To add a program icon to the Quick Launch toolbar

  Click the icon for the program to add (you can find most icons of programs on the start menu or the desktop) and then drag it to the Quick Launch toolbar.

  Note: If you don't see the toolbar tools quick launch, right-click on an empty area of the taskbar, click Toolbars, and then click quick launch.

  To remove a program to the Quick Launch toolbar icon

  Right-click on the icon of the program and then click Remove.

  Notes: ·         Delete an icon from the taskbar does not remove its corresponding computer program.

  ·         If you want to stop showing a toolbar on the taskbar, right-click an empty area of the taskbar, point to toolbars, and then click the item that you want to stop broadcasting.

  NOTE: The ability to move the programs in the taskbar is not possible in windows Vista but the same functionality is available in Windows 7. Please see the link below.

  http://www.Microsoft.com/Windows/Windows-7/features/Windows-taskbar.aspxand

  Check out these links for more information:

  http://support.Microsoft.com/default.aspx/KB/253679

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-programs-on-the-Quick-Launch-toolbar

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-icons-in-the-taskbar

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Brand new XPS 8900 Win 10 won't turn on, flashes yellow 2 times power made a break of 7 times pauses then resumes.

  Brand new XPS 8900 Win 10 won't turn on, flashes yellow 2 times power made a break of 7 times pauses then resumes.

  I've not seen a chart explaining flashing power on the 8900 XPS button codes. And there is nothing in the Manual.

  You need to contact Dell tech support immediately. You have 21 days from the date of billing (no delivery date) to pick them up. And then you can order another.

  Otherwise, technical support should work with you to solve the problem under warranty on this system.

  If you are comfortable working inside the case, it is possible that something got its place potted during shipping. Then you can try reseating the RAM and PCI-e cards modules and cables between motherboard and drives and connection etc. Don't forget to read the instructions on the inside of your PC use in the manual before opening the case.

• Some Web sites load very slowly for me, and I already checked for viruses and cleared my cache and cookies.

  I had problems with some websites load incredibly slowly and direct to other websites very slowly. Some of them I can't access because it says my connection has been reset. One of them where it says the connection has been reset is YouTube, but when I go to a video through a direct link everything okay.

  What else is odd, is that blogging on Tumblr is loading very slowly for me, but the dashboard went very well and load perfectly.
  I've done a virus scan on my computer and I have already cleared my cache and cookies.
  What can I do else?

  You can try to disable IPv6 (also check other possible causes).

  • https://support.Mozilla.org/KB/Firefox-cant-load-websites-other-browsers-can

• FF ver 11.0; I have a download in the download window that is stuck on Pause and cannot get rid of it.

  Downloading Sumatra PDF reader, I clicked on Pause. When you work on something else, my PC has restarted (WinXP). The download window continues to show download paused and I can't restart the download or cancel it. I can ignore it, of course, and will continue to do so if there is no easy solution.

  Try to delete the downloads.sqlite (and downloads.rdf, if it exists) in the profile folder , the files will be regenerated when needed.

  See manually remove history downloads

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• I've upgraded to the latest Firefox, but something prevents reading Web sites that I have. I already tried to uninstall and reinstall.

  I've upgraded to the latest Firefox, but something prevents reading Web sites that I've updated. I already tried to uninstall and reinstall.

  At first, I thought it was a specific Web site, but I found that it is affecting my sites on a set path. Yet once, I already tried uninstalling and reinstalling firefox. It doesn't seem to affect one of my other internet browsers.

  It would not be a problem, but most of the sites are demanding I upgraded and even disabling certain features until I do.

  Your user agent is corrupt and which identifies you as Firefox/3.0.13

  see your user agent:

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.0.13) Gecko/2009073022 Firefox/3.0.13 (.NET CLR 3.5.30729)

  you need to reset the user agent

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.