My SA60 - 106 does not URGENT

Similar Questions

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Tecra S10-106 does not see the HARD drive 1000GO

  Hello

  I bought a 1000MB HARD disk and build in on a TECRA S10-106.
  The HARD drive was not identified.

  Do you have an answer why?

  Thank you for the help

  Hello

  He recognized the HARD drive in the BIOS?
  If not, then possibly the BIOS can't handle this HARD drive because of the size
  Try a 500 GB or 750 GB 2.5 HDD

• Satellite A60-106 does not start

  Can anyone help? When I turn on my A60 106 it happens with a text screen that says Windows (XP) will not start and a few basic instructions. There are 5 options listed - Safe Mode - Safe Mode with network - safe mode with command prompt - known last good configuration - and start Windows normally. None of them work, computer goes to the Windows XP logo normally then flashes to the toshiba logo, after what the power seems to cut and it is up to the text with the options screen. Which if left constantly looping. All the ideas!

  Hey Warren,

  Whenever I encountered this behavior it is always caused by a defective hard drive. Indeed the system cannot be loaded because the required files can be read from the HD.

  You can try to re - install your recovery CD system in the hope that it is just the files that have been corrupted, but if this also fails then a new HD will be required.

  concerning

• Satellite a60-106 does not recognise handycam

  Hello
  I got my satellite for about a month and everything works fine but when I try to transfer video to my handycam I get an error on the screen of the camera saying "usb invalid during easy handycam" sony's site is all the answers. Other usb devices work fine.
  Any help appreciated.
  Thank you
  Barrie

  Hey Barrie

  If you have a specific problem like that he will always be interesting to know what external device will connect you to the laptop (with Sony). In my opinion, it is not a USB problem but a specific question. Usually in this case the producer of the outdoor unit must have an answer.

  I assume you are using the software given by cam. Check if there is some play/edit menu and the option of USB stream and assign him normally. Usually, it is set to off and the pc doesn't see the cam.

  Good bye

• A Wi - Fi connection does not work on my Satellite M50-106

  Hello

  I need help with the Wi - Fi does not work on my Toshiba Satellite M50-106
  The pilot is OK but will not.
  I had to format the computer

  Hello

  At first be that wireless network adapter is installed and registered properly in Device Manager.
  If everything is OK he make sure card WLAN is enabled correctly.
  Use the combination of keys FN + F8 to enable it, if necessary.

  After doing this scan the area and connect to your WLAN.

  It sounds simply enough now. Please post comments and to inform us if the problem persists.

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent, Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. BU

  Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Urgent! Script of jargon to display dynamic slides in the projector does not

  URGENT matter!
  
  I've developed a lingo than fileIO uses script to count the number of BMP files in a directory, then jargon creates dynamic actors and then I create a newMember (#bitmap) and importFileInto allows to load BMP images dynamically in the cast. It all works very well within the Director! However, when I publish to a projector not load or not to display the slides for some reason any. I also made sure to include each extra under the Sun with the projector, but it still does not work. I'm including the code that I am running below. I'm at the end of the project and thought, that everything has been well-oiled. All ideas are welcome!
  
  Thank you!
  Charles
  ----------------------------------------------------------------------------------
  

  Believe it or not, I've been tracking the issue. There seems to be some kind of problem with some commands from an other Xtra I was using. I have the resolution running Xtra which allows to force the resolution of the screen among other things. I put comment lines

  -disable_task_switching (xResolution)
  -hide_taskbar (xResolution)
  -hide_desktop (xResolution, 0, 0, 0

  After his comments on these lines, my images loaded fine. Very strange problem and I have informed the author of the resolution xtra on this problem.

  Charles

• I closed about 60 tabs when working on my wife's computer. How to restore the tabs again? Where FF does not save URL lists? It's very urgent - can save my marriage! Thank you.

  This was done on FF6.0 XP

  How can I get Firefox to restore the file? Change of name - .js alone does not seem to trigger a restore.

  Set up your profile in windows you had before, then close Firefox
  Make sure that Firefox is down by checking the "process tab" in the Windows Task Manager, and then make your name change and back up Firefox.

  When Firefox is upward or maybe that's what you've done and I just go the menu history ('Alt + H') and then "Restore last session".

  You can save your profile or at least the files of sessions.

• Satellite A60-106 keyboard does not

  I have the laptop above that I took apart to clean the fans. I had to remove the keyboard to do this, and when I put back it together that happened something strange. The first time I started it only half the keyboard worked. I took apart again to check the water and he was sitting and implemented correctly. When I turned this back, reworked keys.
  However, I have noticed when it lights up, caps lock light flashes as it should. However, I can't enter the BIOS or windows boot menu or type nothing when the operating system is loaded.
  I bought a new keyboard now and it does exactly the same thing is not that.
  The USB keyboard works well and I noticed that when I put the caps lock on the caps lock on the keyboard of the laptop also comes on but the keyboard still does not work.
  I downloaded the latest toshiba Web site bios but when I try to start it (this is a windows-based program) it says 'UpdatePlatform failed '. It is the correct bios found here: http://support.toshiba-tro.de/tools/eula/info_eng2.asp
  Here, any advice would be appreciated.

  Hi dude

  > I have the laptop above that I took apart to clean the fans. I had to remove the keyboard to do this, and when I put back it together that happened something strange.

  Have you deleted parts more than only the keyboard to clean the cooling module?
  I guess you did!
  What to tell my friend to me it looks like a hardware problem and it seems that you have done something wrong during disassembly, but portable.

  I put t thing that could update the BIOS helps you because it doesn't look like a BIOS problem. Why? Because it looks like the laptop successfully ran before the opening!

  In my opinion, that you should contact a mobile technician as a common user like you who have no experience will not be able to remedy!
  The ASP can help you. Guys have more experience and use special tools to locate the failure!

  Good luck

• Urgent! T440S Touchpad does not

  Hi all

  Thank you for your attention.

  I have a T440S and the touchpad does not work. I tried to reboot the system, reinstall the driver, update the driver, and no one who does not. I will describe the problem in more detail as follows:

  1. the touchpad does not work

  2 using the tools of diagnosis Lenovo, shows "Lenovo UltraNav pointing device disabled."

  3. the device checked under "Mice and other pointing device", Manager there is that one thing named "mouse HID-compliant" listed, I guess that's my USB mouse?

  4. run the driver Lenovo Manager, watch my touchpad driver is 16.2.19.13

  How can I solve this problem?

  My mouse battery is dying and I need the touchpad when I travel. Help, please!

  
  

• URGENT: Quick Launch software does not

  Hello

  I had formatted by laptop HP G42, whereupon f3, f2 and brightness keys do not work.

  I was told to install software quick launch for her since this link - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en... that I had tried to install however, told him that I already have a Quick lauch in my PC. When I checked, I already have a Quick Lauch 2012 C softwareshore that I tried to run, repair and also uninstalled and installed the same new however, f2 and f3 still does not.

  I also tried to install the new software from the link mentioned however, f2 and f3 still does not.

  Kindly help solve as soon as POSSIBLE because I have to use laptop every day and brightness should be adjusted. Kindly solve as soon as POSSIBLE.

  Kind regards

  Isha Abrol.

  Ok...

  I didn't know that you have Windows 7 32 bit installed.

  I gave you some 64-bit drivers.

  This is why you got this error... Make sure it is designed to work with Windows for 32-bit systems

  See if this graphical 32-bit driver works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90548-2&cc=us&DLC=en&LC=en&OS=4062&product=4301647&sw_lang=

  Try the manual installation, if auto installation does not work, but this time navigate to C:\SWSetup\sp50871.

• [URGENT] My laptop does not light

  Hello, so my Compaq Notebook 15-a003sa will not start. He also had a problem the day before as a black screen appeared, but I was able to fix it with a hard reset. This time, when I try to press the power button, the led of the wireless button flashes orange. I tried to load, however, when I press the power button, the light on the side of the laptop to become white to indicate he's going to turn it back on and then back to orange. I need my laptop to complete my essay, I tried a hard reset, but it's not effective. The screen remains black.

  Useful information:
  Laptop model: Compaq Notebook 15-a003sa
  Was working fine the night before outside the black screen that was the first time it has occurred
  Laptop is less than 4 months
  I have windows 8

  Hello @XxAnisaxX,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that your laptop is not able to put on with success, and I'd be happy to help you in this case!

  To power your computer on again, I advise you to follow the steps described in this document on the computer does not (Windows 8). I also suggest test the adapter using this resource to helpand the power adapter testing.

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• URGENT: sprtcmd.exe does not

  sprtcmd.exe does not

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/9eb9ea5f-ec4b-4d5b-b0d6-279101af7c63]