also problems with the visa information

Similar Questions

• Problems with the VISA series connection (missed the ticks in the data)

  Hello

  I designed a DAQ card with USB connection. The USB connection works in virtual Com Port mode.

  The main vi a while loop. The sampling time is defined by the user and the hand while loop iterates of this time of the sample (for example, 5ms, 10ms or...). Communication of the data is made in the present while loop using VISA read or write tools. Data are stored in global variables so the other could read or change.

  There are screws separate for each part of the DAQ card input analog, digital output and... Each vi has its own time while in a loop which iteration step may be different from the large loop.

  The program works correctly, but there are a lot of ticks of "rate" in the communication of data. I've attached a screenshot of input analog vi. A sine wave is produced with output analog vi and this output is connected to an analog input. As you can see the data transmission has problems.

  This caused several loops work simultaneously? Or communication VISA has problems?

  Thanks in advance.

  The main problem I see with your VI is that you use bytes to the Port which is the wrong thing to use about 99% of the time.  It seems that you are trying to break around 31 bytes and turn them into numbers.  Suppose that at the moment, you check the bytes, a port, you have received only 28 of these bytes.  Some of the variables will find 0 because you have all the data.  But on the next play, you will have the remaining 3 bytes so everything from the.  Now your data package is misaligned.

  I suggest that if you want 31 pieces of information, you just put a constant 31 reading VISA and get rid of bytes to node Port.

  Other advice.  Index table is EXPANDABLE!  You don't need to create 31 copies of the index table and wire a constant to each of them.  Remove a node, and expand the bottom border down that you need.  You don't even have to add all the constants, because by default it will give you index 0, index 1, index 2...

• Anyone else having problems with the payment information section does not load?

  Im trying to put in my payment information in and it will not appear. don't think its connection. I have tried everywhere

  Try a few steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

• Also problems with the PSE12 - Mac series

  I also have the problem in PSE12 with serial number. He said, it is not valid.

  System: OS x 10.8.5, MacBookPro

  Adobe is becoming a real nuisance!

  We worked on that and it should be resolved now.

  At this stage, the hope is that the numbers of series that you ALREAY have will work after that we changed some things on our side, and the changes have propagated to the servers.

  Potentially, this had to be fixed today at noon PST, but we already have reports from users succeed with their serial numbers now.

  I recommend to try and help > Sign In and see if the serial number is accepted for you guys.

  Let me know how it goes,

  Concerning

  Pete

• Problems with the Visa Business for Vista Ultimate 64-bit upgrade

  I have been a loyal customer of ThinkPad T for 10 years. I just got my new T500. In my efforts to save money and wanting to be the best that I bought a 2089-2KU with 2 GIG RAM, Vista Business and a core 9400 processor duo, and then I started immediately at this level to 4 GIG of RAM and Vista Ultimate 64 bit. This has not been fun and my upgrade does not work as I had hoped for. Miss me a lot of drivers after downloading everything on the sites of Lenovo, Microsoft and Intel.

  Is there anyone in the community who can give me some constructive advice outside of spending $500 at a sum of $1,000 on a support, or telling me to clear the machine and buy a new one set up correctly by Lenovo in the factory?

  The easy way to upgrade is to use the Vista Business 64 recovery disks. Like you bought Vista Business 32 Microsoft license is also valid for Vista Business 64. Unfortunately Lenovo support don't honor the Microsoft licensing system and refuse to embark a recovery disc Vista 64 for you if your system came with Vista 32.

  But if you google on thinkpad recovery disks, you'll find U.S. resellers of spare parts online who are willing to sell you the Vista Business 64 recovery discs you need.

• Problems with the display settings in Windows XP on my acer aspire netbook

  Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions

  Hi CharlesHefty,

  1. do you get an error message or error code?

  Check the event viewer for the newspapers of the related events that could help us solve the problems:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  I suggest you try the steps from the following links in the article and see if it helps:

  How to solve problems of hardware and software drivers Windows XP

  How to configure and use multiple monitors in Windows XP

  Overview of multiple monitors

  I hope this helps.

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• I have a problem with the information in the gateway in "network card".

  Original title: I may be a security issue.

  I may be a security issue. When I select control panel - network map, a gateway is displayed with the following information.

  IPv4 192.168 94-fe-f4-Oa-1d-a6 1.254 and MAC address. I use Windows 7 with Security Essentials. Advice appreciated. With our thanks.  Alan

  Exactly why do you think that it is a security problem?

• There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  Hello

  Please contact support: -.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Hope this helps!

• How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder

  How do I monitor/find where is the State of my download?  I don't know how long it takes or if there is a problem with the download that I can't find anything.  Also, is it supposed to be an icon for my purchase of Photoshop and light in my apps folder?  Where can I find that when it's done download?

  Could you please confirm the operating system you are using.

  You can see the status of the application of CC desktop download.

  The CC app desktop click the creative cloud icon located in the taskbar (Windows) or the Apple bar (Mac OS) menu, to open the creative cloud desktop application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Problems with the resource of labview execution 2 visa

  I use two loops in a labview code all-in - connects to a motor controller and other is used to connect to a multimeter agilent. As soon as I run this VI, the loop to connect to the controller stop working and only used to configure agilent machine works. If I remove the second loop (connecting to the computer of agilent), the code works fine. I guess it's a problem with the execution priority. Could you please review the attached code and let me know any problems with it.

  COM1 and Com3 share an interruption.

  Go to the BIOS of the computer and set the port to Com3 to the Com2 port, then they will be on their own interrupt and see if that helps.

  FYI

  COM1 and Com3 share IRQ3

  COM2 and Com4 share IRQ4