"alter database open resetlogs ' not reset one of the data files

I spent the last few weeks and a half, three years recovery of an oracle database (linux 64-bit of 11g) due to a block corrupted in a newspaper online redo (I thought was written at multiple locations). I have restored the files, some of them around displacement in the process; recovered on the last possible point; files moved to their location; has ran "alter database open resetlogs; and one of the files of data (from a bigfile tablespace) does not reset itself. I checked afterwards, and it has been marked offline. I do not remember placing the file in offline mode and can not find such a statement in my last orders 300 sqlplus, that includes orders while I renamed this file and the controls surrounding rename it.

Restore/recovery of the new database will take too long and is a remarkably low option. Even if the database was opened correctly, the affected tablespace not would have been addressed in two or three minutes, that the database has been opened. Is it possible to force the oracle again reset newspapers or the difficulty, otherwise this one file to mark with the same date? Allowing only to the resetlogs option after incomplete recovery seems a poor restriction, in particular, if files gliding through like that. I suspect there is a way to simply set the values of control point for the tablespace, but I don't know where to start. This particular file is < 5% of the database, so if I do a sort of backup/restore with all this, it's probably doable.

Thank you for the necessary information, the image would have been much clearer if you would have posted this initially. There was nothing wrong in procedures that you applied.

Unfortunately, it seems you hit a bug, the command to reset everything... is alter database open resetlogs, and there is no other command.
So, Yes, you must go to this door that says more
'Ogni speranza, voi che entrate leave fare' (leave all hope behind you, you happening. It is the inscription of Hades, the underworld, the Monteverdi's Opera "Orfeo"). This gate is called "My Oracle Support" and if your problem will be solved, who knows.
I don't think that this is a generic problem however, or we would have known, so it's probably still a few 64-bit partner. These days at Oracle quality assurance procedures seems to leave much to be desired.
If all goes well, they will be able to reproduce your problem.
Good luck on your trip across the river Styx!
Although they will probably want to upgrade you to 11.1.0.7
------------
Sybrand Bakker
Senior Oracle DBA

Tags: Database

Similar Questions

  • ALTER database open resetlog?

    Hi all

    I have try the database cloning (new name of the database) in my development environment (Oracle 11 g r1 Windows 2003 Server). While creating a new controlfile, we order as this "CREATE CONTROLFILE REUSE SET DATABASE 'ORCL2' RESETLOGS FORCE LOGGING NOARCHIVELOG"
    1.i just want to know why we need to use resetlogs, when I place this order, what happens internally in the oracle?
    2. when the new name of the database is updated in all the data file during create controlfile or opening of the database?
    3 alter database open resetlogs what happens internally in the oracle when I place the order?

    Please me tips

    Thank you and best regards,

    Shan

    This will help you

    http://Web.NJIT.edu/info/limpid/doc/backup.102/b14191/osrecov009.htm

  • ALTER database open resetlog with ora-01666: controlfile is in standby

    I have a problem after I have restore / recovered a backup of the source.

    On the target, restoration/recovery all finished successfully, but change open resetlog of database with the following errors:

    ORA-01666.

    My steps are:

    (1) make a backup as follows on the source (which is a prod before) complete
    Configure controlfile autobackup on;
    Configure snapshot controlfile name to ' / oracle_backup/rman/snapf.f'
    BACKUP OF DATABASE TAG 'FULL '.
    (2) CPC backupsets above the target
    (3) in rman, set the dbid as the dbid of source, restored the snapf.f and then added the location.
    (4) then restore, recover (everything is fine).
    (5) when I alter database open resetlogs, it gives me error ora-01666.
    (6) change the database open worked, but the PB is now in sleep mode and readonly.

    I checked the settings, the dbname points to the dbname in source and db_unique_name point test on the target name. These two parameters have been reset by RMAN Duplicate.

    We do not want a standby db, we need a test copied from the sourc.e environment

    How should I proceed from here?

    Thank you

    Hello again;

    And there is the problem, the only file of control is a watch. Compare your this example of mine:

    BS Key Type LV Size Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ ---------------
4170117 Full 9.70M DISK 00:00:03 29-NOV-12
        BP Key: 4170119 Status: AVAILABLE Compressed: NO Tag: TAG20121129T125327
        Piece Name: /u01/oradata/RECOVER2_cold/control_RECOVER2_2821_20121129.bak
Control File Included: Ckp SCN: 1307992402301 Ckp time: 29-NOV-12

BS Key Type LV Size Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ ---------------
4170127 Full 9.73M DISK 00:00:01 29-NOV-12
        BP Key: 4170129 Status: AVAILABLE Compressed: NO Tag: TAG20121129T125332
        Piece Name: /u01/app/oracle/flash_recovery_area/RECOVER2/autobackup/2012_11_29/o1_mf_s_800628756_8chcsf10_.bkp
Control File Included: Ckp SCN: 1307992402301 Ckp time: 29-NOV-12

    Note the version of ".bak" auto backup and y.

    I think you need to take another backup. If you use Oracle 11 I have even more options.

    For example, I update my test system using this:

    http://www.Visi.com/~mseberg/RMAN/diff_database_duplicating.html

    Sometimes I save on users, roles etc and replace later to hide.

    Subsequently

    You may be able to save what you have by creating a trace on the source file and then use it to re-create a control on the copy file.

    If you run a backup trace command daily you can probably pull some SQL from your daily trace file like this.

CREATE CONTROLFILE REUSE DATABASE "RECOVER2" NORESETLOGS  NOARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 100
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
...
...

    You can save as say cf.sql, then:

    SQL> startup nomount 

Run the SQL as shown above

SQL> @cf.sql

Control file created.

SQL>

Check the status of the database

SQL> select status from v$instance;

-- should be mounted

If the database is mounted, can it be opened?

Open the database

SQL> alter database open;

Database altered.

    Best regards

    mseberg

    Published by: mseberg on November 29, 2012 19:10

  • ALTER database open resetlogs

    Hello

    When we do not control the recovery of files using cold backup apply us redo logs and archive logs.

    so here we are going to complete recovery.

    and when I try to open the database with > alter database open;

    It is said to use the resetlogs or noresetlogs option.

    That is why we open the database need with > alter database open resetlogs;

    Why > alter database open; does not work.

    Please let me know.

    Thank you

    It has to do with the incarnation of the database which would be affected when retrieving control files is done. It's the OPEN clause will not work.

    Aman...

  • ALTER database open resetlogs throw error

    Hi all

    My db version is 10.2.0.4

    Trying to open the database

    ALTER database open resetlogs throws error like

    ORA-04098: trigger ' APPS. LOGON_TRGR' is invalid and does not re-validation

    suggestion?

    Thank you
    Baskar.l

    Unresolved questions 45 / 48?

  • Yosemite OS, cs6 ext, that's what I get when trying to open, could not initialize Photoshop because the preferences file was invalid (it was deleted). Please help me

    Yesterday it was working fine, this morning, I tried to open cs6, and I get the above message. Tried to put the file in my laptop (copied to a USB key) and when I close all the windows files is not displayed again, and ps6 shows me this message above. I use a 27 "iMac computer. I've installed a plugin (WhiteWindowworkaround.plugin1_0_6.zip) to correct my problem of cursor. PLEASE HELP ME...

    The first thing I would try would be to manually reset preferences. If this fails, try to uninstall the plugin and see if the problem goes away.

    In case you don't know how to reset:

    Reset preferences

    (1) close the program, and then press Ctrl + Alt + Shift (Win) / command + Option + shift (Mac) (not reversible) starting

    or

    (2) move the folder. See:

    http://www.Bugge.com/family-and-friends/Illy/Illy.html

    -OB

  • Defining the new path for the data files for restoring using the VALUE of NEWNAME FOR DATABASE

    Version: 11.2.0.3 Linux

    Today, I had to do a restore RMAN to a new server and I came across the post following RTO on the VALUE of NEWNAME FOR DATABASE

    ALTER database open resetlogs upgraded;         error to throw

    So, I thought to use it to indicate the new location of the data files to restore.

    That's what I did
    ===================

    Restore the control file and catalog items to backup using the command of CATALOGUE START WITH. Then I started the restoration
    $ rman target / cmdfile=restore.txt

Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:40:41 2012

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: SPIKEY (DBID=2576163333, not open)

RMAN> run
2>  {
3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
4>  restore database  ;
5>  }
6>
7>
8>
executing command: SET NEWNAME
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of set command at 07/26/2012 04:40:43
RMAN-06970: NEWNAME '/fnup/hwrc/oradata/spikey' for database must include %f or %U format

Recovery Manager complete.
    Don't know how it worked for Levi without %f or %U. So, I added %f
     $ vi restore.txt
 $ cat restore.txt
run
 {
 SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
 restore database  ;
 }


 $ rman target / cmdfile=restore.txt

Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:45:45 2012

Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

connected to target database: SPIKEY (DBID=2576163333, not open)

RMAN> run
2>  {
3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
4>  restore database  ;
5>  }
6>
7>
8>
executing command: SET NEWNAME

Starting restore at 26-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK

channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /fnup/hwrc/oradata/spikey/1
channel ORA_DISK_1: restoring datafile 00002 to /fnup/hwrc/oradata/spikey/2
channel ORA_DISK_1: restoring datafile 00003 to /fnup/hwrc/oradata/spikey/3
channel ORA_DISK_1: restoring datafile 00004 to /fnup/hwrc/oradata/spikey/4
channel ORA_DISK_1: restoring datafile 00005 to /fnup/hwrc/oradata/spikey/5
channel ORA_DISK_1: restoring datafile 00006 to /fnup/hwrc/oradata/spikey/6
channel ORA_DISK_1: restoring datafile 00007 to /fnup/hwrc/oradata/spikey/7
channel ORA_DISK_1: restoring datafile 00008 to /fnup/hwrc/oradata/spikey/8
channel ORA_DISK_1: restoring datafile 00009 to /fnup/hwrc/oradata/spikey/9
channel ORA_DISK_1: reading from backup piece /u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
channel ORA_DISK_1: failover to piece handle=/u07/dump/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk tag=SPIKEY_FULL
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:56
Finished restore at 26-JUL-12

Recovery Manager complete.
    As you can see, RMAN restore data files to the desired location. But the data file names ended up as
    1
2
3
.
.      
.
9
    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -----------| Holy Cow |-----------------------------


    So I had to rename each file as below
    $ mv 1 /fnup/hwrc/oradata/spikey/system01.dbf
$ mv 2 /fnup/hwrc/oradata/spikey/sysaux01.dbf
$ mv 3 /fnup/hwrc/oradata/spikey/undotbs01.dbf
    I would have been better in execution of the order for each data below file
    SET NEWNAME FOR DATAFILE
    Now, I think, there is no advantage in using NEWNAME SET of DATABASE to. Only the disadvantages. I did anything wrong above?

    Martin;

    On the issue of the VALUE of NEWNAME FOR DATABASE, you must specify at least one of the first three of the following substitution variables to avoid collisions of names: %b f % U. see semantic entry for TO 'filename' for a description of the possible substitution variables.

    You use %f

    %b

Specifies the filename without the fully qualified directory path. For example, the datafile name /oradata/prod/financial.dbf is transformed to financial.dbf. This variable enables you to preserve the names of the datafiles while you move them to different directory. During backup, it can be used for the creation of image copies. The variable cannot be used for OMF datafiles or backup sets.

%f

Specifies the absolute file number of the datafile for which the new name is generated. For example, if datafile 2 is duplicated, then %f generates the value 2.

%U

Specifies a system-generated unique filename. The name is in the following format: data-D-%d_id-%I_TS-%N_FNO-%f. The %d variable specifies the database name. For example, a possible name might be data-D-prod_id-22398754_TS-users_FNO-7.

    Source - E10643-01

    Backup and recovery reference

    http://docs.Oracle.com/CD/E14072_01/backup.112/e10643/rcmsynta2014.htm

    I see CKPT and I agree on that!

    Best regards

    mseberg

  • Database does not start... ALTER database open; change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

    HI during startup of the database of the following errors is. Please help solve the problem.

    SQL > alter database open;

    change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

    ============================================================

    Please see the alerts log entries

    --------------------------------------------------------------------------------------------------------------------------------

    Commissioning:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    With the options of partitioning, OLAP, Data Mining and Real Application Testing.

    Using parameters in spfile D:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEATTNDPRD server-side. ORA

    Parameters of the system with default values:

    process = 400

    sessions = 624

    memory_target = 4G

    control_files = 'D:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB0M_. CTL.

    control_files = 'C:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB13_. CTL.

    DB_BLOCK_SIZE = 8192

    compatible = "11.2.0.0.0."

    log_archive_format = "ARC%S_%R.%T."

    db_create_file_dest = 'D:\oracle\oradata. '

    db_create_online_log_dest_1 = "D:\oracle\oradata".

    db_create_online_log_dest_2 = "C:\oracle\oradata".

    db_recovery_file_dest = 'C:\oracle\oradata\flash_area. '

    db_recovery_file_dest_size = 8G

    undo_tablespace = 'UNDOTBS1.

    Remote_login_passwordfile = "EXCLUSIVE."

    db_domain = «»

    dispatchers = "(PROTOCOL=TCP) (SERVICE = ATTNDPRDXDB)" "

    audit_file_dest = "D:\APP\ADMINISTRATOR\ADMIN\ATTNDPRD\ADUMP".

    AUDIT_TRAIL = 'DB '.

    db_name = "ATTNDPRD".

    open_cursors = 300

    diagnostic_dest = "D:\APP\ADMINISTRATOR".

    Sun 24 May 13:43:09 2015

    PMON started with pid = 2, OS id = 5792

    Sun 24 May 13:43:09 2015

    VKTM started with pid = 3, OS id = 6500 high priority

    VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

    Sun 24 May 13:43:09 2015

    GEN0 started with pid = 4, OS id = 13072

    Sun 24 May 13:43:09 2015

    DIAG started with pid = 5, OS id = 1424

    Sun 24 May 13:43:09 2015

    DBRM started with pid = 6, OS id = 8240

    Sun 24 May 13:43:09 2015

    PSP0 started with pid = 7, OS id = 2980

    Sun 24 May 13:43:09 2015

    DIA0 started with pid = 8, OS id = 12956

    Sun 24 May 13:43:09 2015

    MA started with pid = 9, OS id = 13356

    Sun 24 May 13:43:09 2015

    DBW0 started with pid = 10, OS id = 14248

    Sun 24 May 13:43:09 2015

    DBW1 started with pid = 11, OS id = 17900

    Sun 24 May 13:43:09 2015

    LGWR started with pid = 12, OS id = 5564

    Sun 24 May 13:43:09 2015

    CKPT started with pid = 13, OS id = 16736

    Sun 24 May 13:43:09 2015

    SMON started with pid = 14, OS id = 14068

    Sun 24 May 13:43:09 2015

    RECCE has started with pid = 15, OS id = 16288

    Sun 24 May 13:43:09 2015

    MMON started with pid = 16, OS id = 10884

    commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

    commissioning or shared server 1...

    Environment ORACLE_BASE = D:\app\Administrator

    Sun 24 May 13:43:09 2015

    ALTER DATABASE MOUNT

    Sun 24 May 13:43:09 2015

    MMNL started with pid = 17, OS id = 16128

    Mount of redo thread 1, with mount id 3325657453

    Database mounted in exclusive Mode

    Disabled lost write protect

    Completed: ALTER DATABASE MOUNT

    Sun 24 May 13:43:23 2015

    change the database open

    Sun 24 May 13:43:23 2015

    LGWR: FROM PROCESS ARCH

    Sun 24 May 13:43:23 2015

    Arc0 started with pid = 21, OS id = 10084

    Arc0: Started archiving

    LGWR: FROM PROCESS ARCH COMPLETE

    ARC0: FROM PROCESS ARCH

    Sun 24 May 13:43:24 2015

    Arc1 started with pid = 22, OS id = 18400

    Sun 24 May 13:43:24 2015

    ARC2 started with pid = 23, OS id = 17280

    Arc1: Started archiving

    ARC2: Started archiving

    Arc1: become the "no FAL' ARCH

    Arc1: become the "no SRL" ARCH

    ARC2: Become the heartbeat ARCH

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

    ************************************************************************

    You have choice to free up space in the recovery area:

    1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

    then consider changing POLICY of DELETE ARCHIVELOG RMAN.

    2 back up files on a tertiary device such as a tape with RMAN

    SAFEGUARDING RECOVERY AREA command.

    3. Add space drive and increase the db_recovery_file_dest_size setting to

    reflect the new space.

    4 remove the unnecessary files using the RMAN DELETE command. If a service

    the system control has been used to remove the files, and then use the RMAN DUPLICATION and

    Commands DELETE has EXPIRED.

    ************************************************************************

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-19809: limit exceeded for file recovery

    ORA-19804: cannot recover disk 44571136 bytes limit 8589934592 space

    ARCH: 19809 error creating archive log file to ' C:\ORACLE\ORADATA\FLASH_AREA\ATTNDPRD\ARCHIVELOG\2015_05_24\O1_MF_1_10343_%U_. ARC'

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-16038: log 2 # 10343 sequence can be archived

    ORA-19809: limit exceeded for file recovery

    ORA-00312: wire 2 1 online journal: ' D:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYD8B_. JOURNAL"

    ORA-00312: wire 2 1 online journal: ' C:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYDF6_. JOURNAL"

    USER (ospid: 10400): put an end to litigation because of the error 16038

    Sun 24 May 13:43:24 2015

    ARC3 started with pid = 24, OS id = 2188

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_arc2_17280.trc file:

    ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

    ************************************************************************

    You have choice to free up space in the recovery area:

    1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

    then consider changing POLICY of DELETE ARCHIVELOG RMAN.

    2 back up files on a tertiary device such as a tape with RMAN

    SAFEGUARDING RECOVERY AREA command.

    3. Add space drive and increase the db_recovery_file_dest_size setting to

    reflect the new space.

    4 remove the unnecessary files using the RMAN DELETE command. If a service

    the system control has been used to remove the files, and then use the RMAN DUPLICATION and

    Commands DELETE has EXPIRED.

    ************************************************************************

    Instance of stopped by USER, pid = 10400

    --------------------------------------------------------------------------------------------------------------------------

    Regarding

    Ngoyi

    Hello

    Now it works very well... with following

    --------------------------------------------------

    using sqlplus

    • Startup mount
    • ALTER database noarchivelog;
    • ALTER database open;

    -------------------------------------------------------------------------------

    Concerning

    Ngoyi

    -------------------------------------------------

  • ORA-1113 marked during: alter database open

    Help, please!

    While in retrospect was backing one of the index file of the database on our server, I started accidentally services and the Oracle database. When trying to connect to SQL, the following error message occurs:

    ORA-01033: Oracle initialization or shutting.

    I opened the alert log database and the following error message was published at the time, that I started to the Oracle database.

    ORA-1113 marked during: alter database open

    Is the version of Oracle 8i and the operating system is Windows NT 4.0.

    If anyone knows how to fix this problem without having to perform a database recovery, I would appreciate your help.

    Thank you in advance.

    ORa-1113 error means that your application of backup ("retrospective") an ALTER TABLESPACE BEGIN BACKUP and END for each tablespace.

    In 8i, you wouldn't have the command "ALTER DATABASE END BACKUP". Neither the "ALTER DATABASE DATAFILE... BACKUP COPY OF THE END. "

    What you would do is:
    1. start the service.
    2. go to the quick Windows command line as administrator or the account of the OS_DBA Group (with the right ORACLE_SID, ORACLE_HOME and path)
    3 sqlplus / as sysdba
    4 start editing - or ALTER DATABASE MOUNT so it start but not mounted
    5 ALTER TABLESPACE (tablespacename_that_was_in_backup_mode) BACKUP end;
    (if there were spaces of multiple tablespaces in backup mode, issue the END BACKUP for each other)
    6. ALTER DATABASE OPEN;

    The other option in step 5 is the "RECOVER DATABASE". Oracle can ask any archivelogs to synchronize the files data back.

  • ORA-1092 marked during: ALTER DATABASE OPEN...

    Oracle 11.2.0.1

    Running in noarchive mode - so no backup. This is a new test database.

    The database was working fine. I used SQL Developer 'data copy' to bring objects of production database for test. The program ran for hours and never finished. So I clicked on the button "Cancel". And "the copy database" program closed cleanly.

    I was able to connect to the database, but when I tried to create a db link it hung. So I made an immediate halt and the database closed properly.

    But when I tried to put the database in the rear seat... that's when the problem started.

    SQL> startup
ORACLE instance started.

Total System Global Area 1.3495E+10 bytes
Fixed Size                  2218032 bytes
Variable Size            6845106128 bytes
Database Buffers         6576668672 bytes
Redo Buffers               71471104 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
Process ID: 5555
Session ID: 191 Serial number: 3

SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist

    Here's what's in the newspaper of the alerts:

    <msg time='2014-11-07T07:30:05.326-08:00' org_id='oracle' comp_id='rdbms'
 msg_id='opiexe:3056:2780954927' client_id='' type='NOTIFICATION'
 group='admin_ddl' level='16' host_id='dub-ImrORA2.americas.epicor.net'
 host_addr='10.20.0.88' module='[email protected] (TNS V1-' pid='5555'>
 <txt>ORA-1092 signalled during: ALTER DATABASE OPEN...
 </txt>
</msg>
<msg time='2014-11-07T07:30:05.343-08:00' org_id='oracle' comp_id='rdbms'
 client_id='' type='UNKNOWN' level='16'
 host_id='dub-ImrORA2.americas.epicor.net' host_addr='10.20.0.88' module='[email protected] (TNS V1-'
 pid='5555'>
 <txt>opiodr aborting process unknown ospid (5555) as a result of ORA-1092
 </txt>
</msg>
<msg time='2014-11-07T07:30:06.531-08:00' org_id='oracle' comp_id='rdbms'
 type='UNKNOWN' level='16' host_id='dub-ImrORA2.americas.epicor.net'
 host_addr='10.20.0.88' pid='5555'>
 <txt>ORA-1092 : opitsk aborting process
 </txt>
</msg>

    Please tell me how to recover this database.

    It seems that you have corrupted objects "bootstrap", such as access$, which is necessary for the open operation. Only solution is to restore from a backup, or re-create DB.

  • Cannot run 'alter database open"in the file of RRS

    Hello

    My OS is Sun solaris,

    Version of DB - 10.2.0.2.0

    I am currently performing an offline backup in the file RRS by RMAN.
    but when he reached never to
    alter database open;
    the code is
    connect target RMAN/*****@abcd

startup force dba;
shutdown immediate;
startup mount;

configure retention policy to recovery window of 31 days;
configure controlfile autobackup on;
configure default device type to sbt;
configure device type sbt parallelism 1;
configure channel device type sbt format '%d_%s_%t_%p';

RUN
{
set command id to 'RMAN off full to nsr';
backup database;
}    \\===============> full backup is successful here.

alter database open; //=================>but never reaches to this line

RUN
{
allocate channel d1 device type disk;
copy current controlfile to '/aib-oa/ar/oraA378/backup/copy_A378.ctl';
release channel d1;
}

allocate channel for maintenance device type disk;

RUN
{
delete noprompt backup of spfile completed before 'sysdate-7';
}
    What is the problem with the script?

    any help in this...

    Thank you

    You would be able to open the database if you include it in the execution block

    C:\Documents and Settings\Administrateur > rman target sys/oracle

    Recovery Manager: release 10.2.0.5.0 - Production Fri Jan 13 18:03:40 2012

    Copyright (c) 1982, 2007, Oracle. All rights reserved.

    connected to target database: PRIM (DBID = 769308260, is not open)

    RMAN > run
    2 > {}
    3 > alter database open;
    {4 >}

    using the control file of the target instead of recovery catalog database
    open database

    RMAN >

  • How can I fix this error message, the address has not been understood Firefox doesn't know how to open this address, because one of the following values for protocols (connectag

    We have a new computer and I can't get my watch running from garmin for synchronization with mozilla. The error message I get is "address not was heard.

    Firefox doesn't know how to open this address, because one of the following protocols (connectagent) is not associated with any program or is not allowed in this context.

       You might need to install other software to open this address."

    Help please

    Hi grranchgirl, if you have an "Always enable" and "never activate?

    I don't know if the terms 'modern' and 'classic' mean anything to you, but there is a thread on the Garmin forums that might be useful - it is very long and I didn't read it all.

    https://forums.Garmin.com/showthread.php?79956-modern-Garmin-connect-mostly-doesn-t-work-in-both-Firefox-and-chrome & p = 330634 #post330634

  • I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You mi

    I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You may need to install additional software to open this address. "Someone knows what's going on?

    Please try to download from: https://helpx.adobe.com/creative-cloud/help/install-apps.html. You can also try to download using the different browser.

  • I just bought a Canon 7 d, Mark II, new DellXPS and 5.2 of Lightroom.  The Lighthouse is not open the 7DMark II, but opens the older 7 d that I imported.  I checked the update of the home page and do not see one for the 7 5 d Mark II.  Please say what t

    I just bought a Canon 7 d, Mark II, new DellXPS and 5.2 of Lightroom.  The Lighthouse is not open the 7DMark II, but opens the older 7 d that I imported.  I checked the update of the home page and do not see one for the 7 5 d Mark II.  Please that's where - otherwise what.  I'm "waiting until what his doing."  Thank you.

    Upgrade to the current version, which is Lightroom 5.7.1. You can do it from the Lightroom Help menu and choose updates.

  • Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

    I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.

    Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.

    I have attached the log file and the list of files in the folder of servers.

    Any help much appreciated.

    Welcome to the community,

    This virtual machine successfully powered on since July 23?

    To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.

    If this is the case, you can delete the virtual machine to inventory, edit the vmx file by

    replacement of

    scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk

    with

    scsi0:1.filename = LHMU - VIC04_1.vmdk

    then right-click on the vmx file in browser data store and add it to the inventory.

    Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.

    If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.

    If you are not sure, please post back before doing anything.

    André

Maybe you are looking for