Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.
I have 4 virtual servers running on a host ESX 4. 3. run OK but 1 gives the following error when you choose works in Vsphere client.
Cannot open disk ' * hard ' or one of the snapshot disks it depends on. Reason: One of the parameters is not valid.
I have attached the log file and the list of files in the folder of servers.
Any help much appreciated.
Welcome to the community,
This virtual machine successfully powered on since July 23?
To me, it seems that something went wrong with the clichés (I guess they are / were created by a backup application). Due to the size of the files I guess more that snapshots were created and not modified.
If this is the case, you can delete the virtual machine to inventory, edit the vmx file by
replacement of
scsi0:1.filename = LHMU-VIC04_1 - 000004.vmdk
with
scsi0:1.filename = LHMU - VIC04_1.vmdk
then right-click on the vmx file in browser data store and add it to the inventory.
Before adding it to the inventory, delete the snapshot vmdk files (those with '00000 x' in their file names) as well as the vmsd file. BTW, you can also remove the zdump file if you want.
If you are not sure if snapshots contain valid data, take a look at the (small) header files vmdk. If the CID and the parentCID match, snapshots were created while the virtual machine has been powered down.
If you are not sure, please post back before doing anything.
André
Tags: VMware
Similar Questions
-
Cannot open my dynamics on my computer. the application is not compatible.
Cannot open my dynamics on my computer. the application is not compatible.
This is a forum intended for consumers. You're more likely to get help from the Microsoft Dynamics community.
Start here--> https://mbs.microsoft.com/customersource/Global/RMSPOS/support
When you ask one of the forums, you have to mention what happened to your system, shortly before the problem started.
-
Advice on the resolution "Error #2004: one of the parameters is not valid."?
Hello
Sometimes my graphs of objects returned by a remote call can be very deep and complex. As you know, if you have not a reference to all the types of objects returned by a call to distance, you get this error:
"ArgumentError: Error #2004: one of the parameters is not valid."
So, I know what the problem is, but I often have a devil of a time finding - this who-class/type on that it chokes. It usually involves a long process of trial and error.
I was wondering if I forget what is obvious or if someone has a method to determine what classes he chokes on?
Thank you!
Usually, if you are using a debug version, you will get a record of the complete stack with line numbers. I find those useful.
Alex Harui
Flex SDK Developer
Adobe Systems Inc..
-
We have microsoft vista and cannot logon - received messages saying the password is not correct Admin and the other account.
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. Mick Murphy - Microsoft partner
-
Cannot open any office files or icons, the Panel even not. Help!
Hello
I really need help desperately. I can't open any office files or icons. I restored to the point the closest that I can, but no difference. Cannot open the Panel even from the Start button. My compuetr crashes every time I double-click or right-click on the icon 'My Computer' or 'My Documents '.
My restore CD that was shipped with the Toshiba Satellite 1800 does not work either. Help, please! I'm really desperate!
JessWhat do you think average with "I tried with the restore CD but nothing '? Have you tried to completely format your HARD drive? I had a similar problem, but in my case it was because of the transplant of BONE... so I reinstalled the system from the beginning and it was ok.
If you can not solve this problem with the cd supplied by the factory... I think it might be a hardware problem, probably due to the HARD drive. Your HARD drive makes strange noises, like "Click - Clack"?Good bye
-
Cannot open a session in analytics if the user is not mapped to the BIAdministrators group
Hello
I created a new user, lets say 'abc '.
The issue I'm facing is: for the 'abc' user, I traced only groups 'Author BI' and 'BI consumer' as I forced her to test the SPR where I didn't that correspond to the BIAdministrators group.
With the above user, if I try to log in analytics, I get the below error message:
An error occurred during authentication. Try again later or contact your system administrator.
When I added BIAdministrators group through the console of the 'abc' user, I am able to connect successfully.
Is the same for all users by default those too - weblogic etc.
But when I tried the same steps (not to add BIAdministrators group to a user) in the system of my colleague, its working fine.
Could someone help me with this problem.
I also checked privileges section to manage both the system and there seems to be no change.
Thank you
Srikanth.
I found the answer on my own. It seems that the role of the authenticated user is not having access to the object.
Therefore, open the RPD-> right click-> properties-> change permissions for the authenticated user to read field
Deploy the RPD now.
Problem solved.
-
icons are not normal, downloaded progam icons do not show up on desktop, errors of all kinds of files, cannot load down internet Explorer.
Thank you
icons are not normal, downloaded progam icons do not show up on desktop, errors of all kinds of files, cannot load down internet Explorer.
Thank you
Rebuild your icon cache. It could be damaged
http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html use an easier Option.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
The address is not valid problem when opening new tab
opening of firefox (I crash usually close under Task Manager), it reloads all tabs as it should.
But when you open a new tab, I get "the address is not valid.
I tried all the parameters of the start of the blank home page and latest opening option.
I have tried all suggestions in other markets, reset... Subject: config
I wish it had a document giving detailed information for all parameters
When on the topic: config and search newtab, the only user adjustment (not default) is
browser.newtabpage.storageVersion; 1 and I tried 0,1,2,3,4,5 restart no change even between the two.
Have been re-intall, reset, safe mode, nothing works
the tab works normally after the error, which means that I can start typing in the address bar and even complete works of auto... I restarted just fz and he did a 27.0.1 update
that did not fix it either... I'm bored of the default page of fx that has recent photos.
-
I stop a virtual machine after a certain time, I tried to power. Its has ended up in the following error message
Reason: The specified file is not a virtual disk. Cannot open disk ' / vmfs/volumes/4d48ad95-ad5e027a-67f4-e41f1360cc9e/Iso/ser01/ser01.vmdk' or one of the snapshot disks it depends on.
The machine was working fine before the closure.
In the data store, the file type of the virtual machine is 'file' instead of 'virtual drive '.
Help, please
You are missing the file descriptor hard. The xxxx - flat hard is the file that contains the data effectively. But the xxxx.vmdk is missing, which is a text file that connects to the flat file.
AWo
-
Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.
I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.
-
Cannot open disk (Moved from Windows XP to Win7)
Because a hardware failure I had to buy a new laptop. Using an external HARD drive Bay I could record my VM and copy the folder on my new laptop. After the installation of VMWare server and add my virtual machine, I tried to start it but I failed for the following reason:
Cannot open disk 'D:\Virtual Machines\dev\dev.vmdk' or one of the snapshot disks it depends on. Reason: Cannot lock the file.
I already tried to remove the hard disk from the virtual machine and add it again but no luck.
Please I need some advice!
Thank you in advance
Seems that the backup was made VMware Server again looked at the file. If please delete all files *.lck (and folders), then try again.
André
-
My iCloud and shared calendars has stopped working in MS Outlook today. They worked yesterday. Now, I get the error message "cannot open this series of records. The information store cannot be opened? I tried the fix standard support.
Same thing here. Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)
I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies. The system cannot find the specified file. "It started after restarting the Windows Update as well. I imagine that the two are related in the same problem to iCloud.
-
Please help me!
I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.
Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)
Thank you.
Hello
Follow these methods and see if the problem still occurs.
Method 1:
Scan an System File Checker (SFC) on your computer and see if that fixes the problem.
Method 2:
Test the issue in a clean boot State.
Note: follow step 7 to your computer as usual.
Method 3:
Follow the steps in this link as well.
-
Server ESX to power a machine virtual "cannot open disk scsi0:0. »
Hi, I get the following error message when trying to turn on a virtual machine, which I copied into the ESXi 4.0 data store u1 server from a vmware workstation. I added to the inventory and tried the power. Here is what I get:
Cannot open disk scsi0:0: type of disc not supported or not valid
7. have you forgot to import the disc first? Failed to create virtual
SCSI device for scsi0:0, ' / vmfs/volumes / 4 b 318298 - 16aee860 - bf19
-f4ce46aecd31/CentOS-54-32/CentOS-54-32-01.vmdk' Module
DevicePowerOn switch has failed.
I created the virtual machine in vmware workstation 7. It is a Centos 5.4 32-bit.
-
I opened a new tab, but the boxes disappeared and comes with "the address is not valid.
I opened a new tab and it used to show my recent history in about 12 boxes but now I get this:
"The address is not valid
The URL is not valid and cannot be loaded.
Oh dear.
Unfortunetly, you'll have to do a clean reinstall of firefox.
https://www.Mozilla.org/en-GB/Firefox/new/
Don't forget to restart your PC inbetween facilities
Good luck
Maybe you are looking for
-
E/s digital USB-6008 changes when the system starts
I was intending to use the USB-6008 housing in a critical application in which the digital I/o lines are used to trigger relays. The relay should activate when I ask them programmatically. Otherwise, they must remain open. The problem is that duri
-
I open the door with a paper clip
-
HP Color LaserJet CP1217: Smoke when printing
What impression of this printer started smoking the crack where the printed paper emerges. I have turned off the machine and I'm worried about its use. There is no smell of burning smoke very well. What is the problem? I got the machine second hand,
-
When I start my lap top it says disk checking in vista (C): arrested
When I try to reboot the drive check, it won't work, I also tried to restore but it won't work becuse of vista (C): fault. now everything on screen is very big and I can't resize
-
Pavilion dm1-4135ef / short DST failed
My pavilion dm1 stuck at windows startup, the interface is black and PC is locked. When I do a start of test: memory test: PASTSmart check: PASTDST short: FAILURE I had a FAILED ID = MAHXVW-62472N-MFPX01-60R403 This means, the hard drive is dead... b