Always choose Yes, 'take me to <; name >;' instead of ask
When typed a URL in the address bar, if the URL is just a name without a plan or a path and if the name is resolved in the DNS, and if the name contains no points, then Firefox guest "Did you mean to go to < name >?" and redirects to a search for the name rather than take me directly to http:// < name & gt;.
How to force Firefox to always try to load the web page on a name without a point, rather than the default value of the research and generate?
I have a screenshot to show what I mean, but I don't know how to include it here.
If you want, you can attach a screen to an answer for you.
However, as far as I know, the answer to your question, is that there is no way to do this in Firefox 33. This will change in a future version.
Currently, if you find the default behavior useful for research, you're stuck with by clicking the button or by using a protocol before the host name (for example, https://intranet).
Or if you do not usually rely on the address for the search bar, you can disable search from address bar. In this case, Firefox will go directly to the DNS resolution and, if your entry is not a host name is valid, will try fixup (e.g., www.+what you typed+ .com).
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste keyw and make a pause so that the list is filtered
(3) double-click the keyword.enabled preference to switch from true to false.
Tags: Firefox
Similar Questions
-
* Original title: extension of the cda
I asked this before, but apparently what I'm asking is impossible to do, nobody understands my question, nobody has the answer to my question, or those seeking to respond to start putting carts before horses to confuse with 'Troubleshootering,' 'Beware of 3rd party software', etc.
Maybe it's my way of asking the question, I don't know.Here it is again:1 burn audio CDs. This is the original CD, no tears.2. I burn data CDs. In this sense I have archive writing, planning and designs on CD/DVD.3. I know the difference between burning via WinExplorer and WinMedia thing.4. everything I burn work fine where it is supposed to.,.5. my equipment is fine. Nothing is broken. IT ALL WORKS.What I want:I want to burn the Audio CD and have "lists of track/name" instead of XXX1.cda.I DON'T WANT the .cda extension.Is this possible?So please: don't tell me what are the .cda extensions or what they or suggest various utilities for troubleshooting hardware or software that works very well.ALL I WANT IS TO GET RID OF THE cda EXTENSIONS."I WANT TRACK NAMES" on my music CD.Thank you.Mario in Victoria> snip
ALL I WANT IS TO GET RID OF THE cda EXTENSIONS."I WANT TRACK NAMES" on my music CD.Thank you.Mario in Victoria==================================================
I understand that you want track names in the directory of
your Audio CD (music), the same thing that you can on a data CD (MP3).Simple answer...
The extension of the ADC will still be visible in the Audio directory
(Music) CD.Take a look at one of your retail music CDs... and you will see that they
are all like that. There is no way to display the track names in the directory
CD audio (music).Take a look at the following article for a bit of info on the CDA files.
How to work with the Audio CD. CDA files
http://www.techsupportalert.com/how_to_work_with_audio_cd_cda_files.htm -
should I show my name instead of the Skype number
How can I get Skype show my name instead of number when some receives a call from me?
Alrighty then, thanks a lot
-
I am trying to run creator of disc Toshiba to create an audio cd, but when I double click top he asks me if I want to allow this program to make changes to my computer, if I choose Yes or no it does nothing and does not start...?
original title: Disc creator does not work...?Hello
-Did you change on your computer before the show?
Follow these steps and check if they help.
Step 1:
Test if the problem persists in a clean boot State.
Note: Make sure that you do not disable while Toshiba disc creator in a clean boot state, and don't forget to follow the steps in the article to restart your computer as usual.
Step 2:
Reinstall the Toshiba disc creator and check if that helps.
http://support.microsoft.com/kb/307895 - for uninstall.
http://support.microsoft.com/kb/305548 - install. -
Is it possible to display name instead of # spec spec?
For a specification of Production packaging ready, when you add related specifications (base spec packaging), the name of the specification were previously [v6.1.1.x], but now [v6.2.0.0.x], it shows just the # spec.
Is it possible to display name instead of # spec spec?
Thank you
Nefertari
Name next to the Spec number form in the research of Formulation Material Input pop up in point 6.2
Nefertari, please see the solution in the link above.
-
Display name instead of the ID in the user interface
Hello
I have the script below to implement. Please see the description below:
__table 1__
ID name
1 ABC
2 XYZ
Table 2
Tabe1ID col1, col2
1 Col1value1 col2value1
2 Col1value2 col2value2
Table1ID column corresponding to the foreign key from table1.
I show data from Table2 in the user interface. while displaying the data in the UI instead of the value of the column Table1ID, I need to display the values of corresponding name column in table1.
that is my view of the user interface should look like below:
Tabe1ID Col1, Col2
ABC Col1value1 Col2value1
XYZ Col1value2 Col2value2
could if it you please let me know how I can achieve this in ADF?
Thanks in advance.
Published by: user8673275 on December 12, 2012 06:27What version of Jdeveloper? Since you are new to the forums... Please read this before posting so that we can help best-
https://forums.Oracle.com/forums/Ann.jspa?annID=56If you use ADF BC, you can create a VO with a join between the table 1 & table 2 exposing all the fields.
Then you can drag and drop the original Version as an array of attributes required on the user interface.This should focus on what I said - the name instead of id
-
Take a string name of a linked object and do
Search terms for this could not understand.
Basically, the game, that I'm working on has several enemies (one on the screen at once).
There's additional info together with the enemy, using a table.
Anyway, the way I want to do is->
I have a MovieClip linked AS, link is mcEnemy.
I have
var enemyLink = "mcEnemy";
enemy of the var =?
Take a string name of a linked object, the use of a function to assign the object actually.
Sorry if the message is confused, he confused myself while typing this.
Anyway,.
Thank you.
You would like kglad you asked. In your case, it would be something like:
var:Class=Class(getDefinitionByName("enemy01")) C;
var c: * = new C();
addChild (c);
Otherwise, the normal way is just like:
enemy of the var: MovieClip = new enemy01();
addChild (enemy);
So if your name is in a table, you could do like:
Add all the enemies
enemy var: Array = new Array ("enemy01", "enemy02");
for (var i: int = 0; i< enemies.length;="">
var:Class=Class(getDefinitionByName(enemies[i])) C;
var c: * = new C();
addChild (c);
}
-
When I opened iMovie automatically opens to the last played film instead of asking me what I want to do. I then shut down the film before I was presented with the opportunity to create a new project. How can I stop this waste of time boring? I use the old iMovie HD 6.0.4 because I find that it is superior to the new versions. IMac 27 "2.66 GHz Intel Core 2 Duo.
This has always been a 'feature' of iMovie 6!
The only solution I know is to move the project current iMovie to another folder, which is in documents, for example, where iMovie can't see it.
-
How can I get firefox to read instead of asking to download an mp3 file?
for example here... http://dota2.gamepedia.com/Abaddon_responses ... I want to listen to one of the files, but instead, he asks me what I want to open it with. If I refresh the page a few times it works... He asks not to open it with something, but 95% of the time, he asks "open with". Someone help please.
There is no need to disable the full filter list, only the particular filter rule that blocks this content must be disabled for this site. If you disable the filter all the value, then you do completely useless ABP. You can probably click or right click on the ABP icon on the bar of modules to see what to be blocked and by what article. I've never used ABP personally, so I can't give precise instructions.
You can try to ask for advice on the Adblock Plus forum:
-
How can I download the English version of Photoshop CC, being located in Finland? Without a few special maneuvers (which I am now to the topic), I always get the Finnish language version, I have never asked my preference.
Change the language setting of your Cloud Creative applications<>
-
I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.
where will be the second serial number?
Help me please.
Thanks, Abe
Hi,
Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error
Kind regards
Sheena
-
Hosts the naming - how to use VMware name instead of file name
Please see attached file.
All hosts based on the same models appear under the same name in hosts. Is it possible to configure vFoglight to extract the vCenter appoint to the host instead of using the file name of the VMware disk for guests of actual spending?
You are looking in the wrong place in the object model.
Machine virtual VMWare is an extension of the host object model. Think of the host as the base model by the dealer and the virtual machine as the base model with all the bells and whistles added to make a street racer.
If you enter a virtual machine name in the top search bar, you will see that the returned results include objects of different types, probably a Machine virtual VMWare and a host. Select the virtual machine VMWare will take you to the model object VMWare-specific screens. Similar results for HyperV, etc..
There is always a host record for each virtual machine, just as each car factory has the model of base somewhere. He just won't have all the bells and whistles.
Looking at your attachment, I think that what you see on the dashboard can be what you see in Virtual Center. Virtual machines have a name that appears on the list of the Virtual Center, which can be separated from the real name assigned to the VM inside the operating system. If you fix the naming in VC, I think you will find that the correction automatically flows to vFoglight.
-
How can Moto em330 - I get ID call to show names instead of some numbers?
When someone who is listed in my 'contacts' calls, it shows that their number and not their name. I can't memorize all the numbers, I just want to see the name of the contact whose name. How to pay for that to happen. I tried everything I can think of already. Thanks, Matt
Matt-
How do you have the numbers stored in your phone? They are in the form of 15555551234 or 5555551234? Choose a contact in your phone that will do a test to deal with you. Go to your phonebook and remove their contact. Then, ask them to call you. Save this number in your phone book and then, ask them to call you again. I guess their name will be displayed. It will probably take something simple like adding a 1 or the removal of the 1 in the phone number.
Mark
Support Forums Manager
-
Auto email address becomes a different name instead of a different email.
When I write a new email, I type in the person's name in the To: field. For example, I'll type in "Michael Smith". As usual, a list of all of the possible 'Michael' e-mail addresses complete for me to choose. I selects the correct address, and then press return. When I hit the return, the e-mail address becomes an any other 'Michael' or 'Susan '. This occurs whenever an address fills and I knocked back.
This is known and reported bug the developers are working on a fix critical. Please note that this bug only occurs if you are using TAB or ENTER.
Two options, but I recommend option 2.
1. if you use your mouse to select the email address and use the mouse to move to the next line then it does not.2. suggest using this method. This method does not require using the TAB or ENTER keys, so will not produce the bug.
Write a new message.
- Use the Contacts Sidebar
- 'View' > 'Contacts sidebar' or toggle view using the f9 key.
- Select address book only SELECT strung
- Click on the button 'TO Addto' or other options.
You can follow the bug here:
You can "vote" for the bug... in the upper part, where it is said:
- Importance:-criticism with 13 votes (vote)
This is not a forum 'cat' or 'support', it is used to report bugs and developers will use, then do not enter do not comment, unless adding new useful data, but you can vote for it. You must register to vote etc.
-
I sent this way new emails (not responses): click on address book. Place comes the space to insert a name. I do, find the name (among some close to it), select it and then click on "write". The result is an email address, which I proceed to write and send. But since there is one day, when I click on the address book, what appears is a long list of names and email addresses. It fills most of the screen of the iMac. And there is no space to insert a name.
Without doubt, I did something stupid to get there. What have I done? And how I turn the tide?
Thank you.
ArthurThis isn't answering your question on what is wrong.
I think that the address book is a pretty lame place to start.
Click on write or reply or forward and window of writing messages appears. pre-populated with the text of the previous message if it is a reply or forward.
If you select the To: box and start typing, it will feature names in the address book corresponding to what you typed.
If you really prefer to choose from a list, you can open a Contacts Sidebar which lists one of your address books. There are buttons to add Contacts selected to your message. You can drag and drop and use right click too. On a PC, F9 opens this sidebar, or you can use alt + v to get the view menu and choose the Contacts Sidebar in the submenu. I don't know how much it works on Mac.
It is so easy to add multiple addresses. You can set them as Cc or BCC.
Your method allows you to send a new message, but does not support the answer or transfer. It penetrates into all recipients regarding: and you have to change one by one, if that is not appropriate.
You see why I think that the address book is a bad place to start from?
If this alternative approach does not work then I suggest that corrupted address book. You have a recent backup to restore from?
Maybe you are looking for
-
Transfer ALL my windows 7 (free upgrade for 10) to my iMac
Good evening (Sydney, Australian time is &.08 PM). My problem is (in addition to being a LONG PERIOD STARTING), is I'm tired of my Windows 7, breaking with respect to the car. updates Microsoft seems not to care. (see their community forums). So I bo
-
Evernote web Clipper is correctly installed. The version is exactly for Firefox. The icon does not appear as promised on a toolbar, so I can't webclip my pages of Mozilla. Kind regards Andris Ozols
-
my internet is going according to a certain time, but the connection still shows. When I reconnect the LAN cable, the net returns...
-
I want to home network Windows 7 64 bit PC and XP Pro 32 bit PC over a wireless network.
I have problems to make the 64-bit machine to recognize the 32-bit computer. I followed the advice help and support on 7 64-bit computer, but it just won't work. They seem to see and recognize each other sometimes, but I can't share files between t
-
Need help for the button to trigger on the text caption effect
Hello worldI work inon a Mac (chart below)I'm very new to Captivate (only my second week), but am familiar in other Adobe programs. I'm trying to get a dynamic object that I made in a button to trigger an effect on a text caption. I scrolled the foru