AMD Radeon 7400 (switchable graphics) on dell vostro 3350 does not work under Windows 8 (error code 43)

Similar Questions

• Reference Dell LR 6 does not work for Windows 10

  Is there a problem with Dell computers using the new 10 Windows and download of CC of LR 6? I can only download LR 5.

  Hi storytellerdoll,

  Please check the OS version you have on your Dell computer, if its 32 bits, so won't it able to install Lightroom 6 thereon.

  If its 64 bit OS, then refer the link for download Lightroom 6: Install Photoshop Lightroom

  Hope that helps.

  Kind regards

  ~ Mohit

• my sex cam dell vostro 1500 is not working or projection in Device Manager

  my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

  I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

  I am using windows 7 ultimate.

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Switchable redeon HD 6470 M does not work in windows 8 Pro, my graphics card? Why?

  I use a HP Pavilion g series

  In my edition of Pro windows 8, my graphics card ATI redeon switchable HD 6470 M does not work? Why?

  I ve installed driver but its says not at all.  No driver problem?
  Do you have windows do not develop this series graphics card driver software?
  Hello!
  I had the same problem with ATI HD 6470 M graphics card on my HP Pavilion G7 1223sm and I found the solution here.
  Drivers for my model of laptop from official page has not worked for me either. After install drivers, Windows 8 was always detect my graphics card such as ATI HD 7400 M with error code 43.
  I downloaded SP58660 and installed, when the catalyst Logo appeared that I canceled the installation (this retrieves the SP58660 on my HDD only).
  I went directly to the control panel-> device-> graphics card Manager. Right-click on 7400 HD and update the driver. I mentioned it in the location 'C:\swsetup\SP58660\Packages' and automatically installed Windows driver.
  Now everything works fine, in the device manager is ATI HD 6470 M without any error code.

• Dell Vostro 220 does not turn on

  Hello I have a Dell Vostro 220 desktop computer purchased in 2009.

  I noticed yesterday that is not switching on.  When the power cord is plugged into the outlet, I see a green light on the back on the power supply (under the voltage 110V setting) but that's all.  By pressing the push button on the front, nothing, absolutely nothing happens.  No fan, no LED inside.

  What can be wrong here? bad power supply or bad mother or push button simply bad diet?

  Any help will be greatly appreciated.

  Thank you

  ndhaya

  It is a Vostro 220 Mini-Tower

  No, the power supply fan does not work.

  Power LED button is also DISABLED

  No there are no beeps at all.

  Apart from the green power light on the back near the power cord, there is nothing else...

   
  ndhaya
   
  First, try to connect the power cord directly into another outlet and see if it makes a difference.
   
  No difference, then replace the power supply with a unit of work to 'know '.
   
  More generic standard ATX power supplies, with a 24-pin or 20 + power connector 4 - pin main motherboard, with or without the on/off switch, would be compatible with the Vostro 220 m

  You should be able to buy a compatible power supply either a local computer or online store.

   
  http://support.Dell.com/support/eDOCS/systems/vos220/en/SM/PSU.htm#wp1181010
   
  Bev.

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Brand new Dell 2808 router does not work.

  1. the 2808 is not connected to the internet.

  2. when it is received, the 2808 under tension with the disabled DHCP server and port active routing. It is the default setting. Not good to use normal, but worked as advertised. The DHCP server is usually needed in a small switch. I needed an active DHCP service.

  3. I've changed managed and connected fashion. A "saved to restore configuration screen" appeared. Horrible thing. Trashed the router. There is no saved configuration, the 2808 restarts. 2808 completely stopped working after that.

  4. after resetting 2808, the 2808 seemed no longer routing packets, so nothing works now with the exception of the web client, which does not seem to do anything for the networking.

  5 I did activate the DHCP client and configure the IP pool. However, no routed packets, nothing works. Port au port data routing does not work. The DHCP server is not required to allocate IP addresses.

  6. I paid 80 dollars to a so-called "Dell Customer Service" held to solve the problem. They have failed. It turns out that they did not know how to work the 2808.

  7 I have not understood how to contact customer service the Dell directly for the 2808. Not good. I bought a T7810 workstation in 2015 with 5 years of service from Dell, and I don't know how to contact Dell support technical support. I use the 2808 with the T7810. Both should be covered if the customer service could be found.

  8. bottom line, I bought the 2808 on July 27, 2016, and many hours later my effort and more hours of a consultant, I am frustrated trying to run home mode: a router 8-port 1000-baseTpacket with a DHCP Server enabled. I'm about to box 2808 router back to Amazon because it does not work and cannot be implemented.

  Any ideas?

  Thanks in advance to 1 million.

  Keith

  The simplest method to contact support is to enter the serial number on our support site.
  http://Dell.to/20VqlwQ The site will then list the various methods to contact support for this range of products.

  The 2808 PowerConnect doesn't have a console port, so recovery is somewhat limited. If the switch is on firmware version 1.0.0.38 or earlier, then a factory reset can be done by simply changing the transition from managed to not managed and then again. If the switch is on more recent firmware, however, this process does not reset the switch to factory default.

  Being a new switch, it should be under warranty. If the switch is not recoverable, support should be able to get a replacement sent to you.

• Shift + del does not work in Windows 7 SP1

  My shift + del key does not work when I try to remove something permanently, but when I am pressing on delete only the key to his work. How to fix?

  Hi Billy,

  Normally, when you delete files that they are sent to the Recycle Bin and so always take disk space hard until you clear. Now, if you press shift + delete button does not work, then I suggest you follow the response of Syed N on this wire.

  Let us know if you need more assistance.

• My Dell D520 microphone does not work

  IAM using 8 Microphone Pro on my Dell D520, but external windows does not work, what can I do guys?

  Your external microphone should work when the Sigmatel driver is installed. He is not one for Windows 8 so you must use the version of Vista and install using the Vista compatibility mode. Driver SigmaTel audio, R171788
  Download the driver package. Extract the files (unzip or decompress) but cancel the installation process. Go to hard disk
  c:\Dell\Drivers\R171788 (this should be the folder that is created when you unzip the download. It contains the driver files).
  Right click on setup.exe and select Properties. Search the Compatibility tab, choose Vista.

• Multimedia keys on Dell USB keyboard does not work.

  I have a Dell Studio XPS 9000 with keyboard Dell USB connected.  All of a sudden the shortcut keys of those (top-right on the keyboard) stopped working.
  What may have caused this?  What can I do to make them work again?

  Original title: Dell USB keyboard

  More often when a device does not work, it's because of a driver.  Try to reinstall your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP envy 6-1012tx with AMD radeon 7670M, switchable graphics does not

  Hello

  I want HP 6-1012tx, I have upgradedfrom of windows 7 to windows 8 and installed any thing and everything was working fine, but yesterday I clean install windows 8 and installed everything again. now everything works fine, but "SWITCHABLE GRAPHICS don't work" even if I tried to install amd radeon 7670 drivers of hp and site Web of AMD, the drivers are installed successfully, but there was no option "CHART COMMUTABLE CONFIGURAtion."... "when I clik ondesktop right.

  Please help me.

  I thought about it myself... first of all update the BIOS and then clean installation OOF amd radeon hpp Web site

• HP Pavilion 15-n057sr: AMD graphics card does not work on windows 10

  Hello!

  I have an AMD graphics card in my laptop, but there is no drivers for windows 10 forher.

  Installation driver Windows 8.1, latest drivers from amd or windows has always led to a screen of death, and after him, he appears each time you start. To solve it, I fix it using restore points. So, why hp doesn't have a driver for his own material? I'm looking for a working one?

  Thank you in advance.

  OK... so what this means is that, while HP provides two models of this laptop, with pre-installed Win8x and the other with Win10, they have different hardware.  The Win10 version apparently does NOT use the AMD chipset, so HP provides no driver for it.

  This means that you're stuck with having upgraded a laptop computer for which there aren't the necessary drivers for HP Win10, and given that HP no longer produces Win10 drivers for older laptops, this situation will not improve over time.

  If you want to have all the features on your laptop, you should consider to return to Win8xs - and that the upgrade of Win10 is known to corrupt recovery information HP OEM, the ONLY way to do that is using recovery media HP to restore laptop factory.

• (Redirected) Dell Vostro 1510 does not restart after the replacement motherboard (CPU the question!)

  Dear,

  I have a problem with my laptop (dell vostro 1510). For the second time my screen went completely black. I couldn't see anything, but the computer was not working. I assumed it was for the same reason as the first time (burnt video card). I have replace it with it and when I try to start the laptop I just get three led among that flashes on the left. It is not go further and I don't have access to the bios. The diagnostic led codes say it is a problem with the processor. How can I test if the processor work? For me, it's weird with the old motherboard, it began. I also tried to reset the CPU on a different time slot. I don't know what to try anymore.

  If you have any suggestions please let me know

  Have a nice day

  Gian

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Graphics ATI DV7 - 4087CL Pavilion does not work on the games! and on windows. Only Intel HD

  Hello everyone, I have the problem on my laptop (Pavilion DV7-4087CL_. I have windows 7 64 bit and all drivers are updated and special ATI AMD Radeon LAST. After installation too, I can't play 3d games or whatever the game with my ati.

  DXdiags also said INTEL HD not ati amd...

  What solution have with this and how im taking all the power of the laptop because is very slow with intel

  Concerning

  Arkadios

  Hi @arkas

  Welcome to the HP Forums! I see you're a few graphic problems. Did you install the ATI driver on the AMD website? If so, that's the problem. You have switchable graphics, which means that you have two video cards. The Intel card is designed for your treatment of basic graphics every day while the ATI card is designed to handle most of the work. Switchable graphics drivers are configured by the manufacturer of the laptop not the manufacturer of the graphics card.

  I suggest that you install your AMD HD graphics driver and your high-definition Intel Graphics Driver. If you need more information on the switchable graphics this document HP Switchable Graphics on laptops equipped with Intel and ATI GPU.

• Audio Dell by MAXX does not work with external soun card

  Hi, I use my Dell Inspiron 15 7537 with Win 8.1
  I plug in external audio interface / sound card Focusrite Scarlett 2i4.
  I installed the drivers and all the inputs/outputs work fine when they are defined in the Windows Audio Manager.
  But in the application Dell Audio (supplied with Windows), I can not change any settings, Sound does not change. (Looks like the settings to change the internal souncard output, but not outside :()
  I love this app Audio Dell with EQ etc. But can I use it with my external USB sound card?

  Thank you!
  David of the Czech rep.

  Duvik

  But can I use it with my external USB sound card?

  Hello David. The answer is no. WavesMaxx is a software that is supplied with the audio driver from Realtek and works only with the Realtek audio hardware on the motherboard.