AMPe ADF with Dynamic tab Shell not made in iPAD 1 +.

Similar Questions

• Version dynamic tab shell 12 c

  Hi all

  I use JDeveloper 12 c (12.1.2.0.0).

  I would like to know if there is a version of 12 c shell available dynamic tab and if so, from where I can download the source of it.

  Thanks in advance,

  Gijith.

  Hi Frank,.

  In the link you provided above ( Shell of the user interface - interface user ADF templates - dynamic tabs UI Shell model functional model UI ) now I can see that the zip source name has changed to dynamic-tab-shell-src - 121200.zip. Is it a changed which is fully compatible with 12 c?

  Gijith.

• Oracle Dynamic tabs Shell - open same workflow in multiple tabs

  Hello
  
  Summary of the problem:
  Is there a way to open a workflow (bounded task flows, with always create new scope txn) in multiple tabs using a page (jspx) based on the model of dynamic tabs Oracle shell. That is, the user must be able to work on the two tabs (loaded with the same workflow) independently.
  
  Problem scenario:
  I use model Oracle Dynamic tabs Shell in one of my .jspx page say default.jspx. This default.jspx is the entry point of my app via adfc - config.Xml.
  
  Tell my navigation menu a itemNode node1
  
  Node1-> corresponds to a stream of flow available1 (bounded task flows, with always create new scope txn)
  
  The navigation of the user I wanted to is as below:
  
  When the application is run default.jspx is loaded with above the navigation menu.
  (1) when the user clicks on node 1, it must open the stream in a dynamic tab available1 say tab1
  (2) when the user clicks on node 1 again, it must open the stream in another dynamic tab available1 say tab2
  The user must be able to work on the two tabs (loaded with the same workflow) independently.
  
  Question: When I tried the application above that I encounter the error below:
  Caused by: oracle.adf.controller.activity.ActivityLogicException: ADFC-00020: workflow ' / WEB-INF/flows/homeTF.xml#homeTF' requires a new transaction, but surgery is already open on the chassis.
  
  Thank you and best regards,
  Pramod Gujjeti

  Pramod salvation,

  Have you tried to set the attributes of your workflow Transaction? Open your workflow definition and then go to preview Tab. Change the appropriate attributes as defining the transaction as 'Always start new operation' or by unchecking the ' data controls share with calling workflow. Try to mix the settings and find the one that meet your needs.

  Kind regards
  Pino

• How to put logoImagePath in oracle Dynamic tabs Shell

  Hello
  I use the model 'oracle Dynamic tabs Shell', and I want to replace the logo 'oracle' with my own logo image.
  Unfortunately, I do not know how to set the "logoImagePath".
  Can someone help me?
  
  
  Thanks in advance

  Hello
  If your logo image file is for example in the public_html/images folder, then you can set the logoImagePath as follows:

  Pino

• A single Firefox window with multiple tabs is not displayed, and yet other new windows will be

  Question [1], a problem that I need help. .

  Is this a window of my browser, with all my precious tabs will not appear anywhere but the taskbar. [2] I know that windows have loaded, but they cling. [3] this I theorize is the fulfillment of one page - one tab - among the 30 + other tabs. [4] this same thing has happened before, but very rarely. .

  I was wondering if there was anyway to solve this problem all always back my very important tabs? Thank you. .

  [1] I have already once previously written this question altogether, but he disappeared after I registered my email. . Once again, rewrite.

  [2] I can always raise new windows and new tabs within these windows, however, the other window, with all other pages are stuck.

  [3] because it pushes me with a download, or play some videos of nowhere to commissioning.

  [4] may not be the case, who knows. . It's happened before, never go to the beta version.

  I solved the problem easily. What I did was stationary my mouse on the preview of the window in the bar of tasks, right click and you press on enlarge. It seems that one of the scripts on one of the windows made the window very small Firefox, or something similar.

• Dynamic tab Shell cut Images and text

  I use the Shell dynamic tab on a page and try to get a few images-links and output text display correctly in the global toolbar.  I want the links to the image on the left side of the toolbar and the output on the right side text.  The problem is the pictures are cut off and the text is envelope in a small space and is not entirely legible.  The images are 32 x 32 pixels.  Should I resize them to something smaller?  I tried to use small images previously, but it seems simply push down and still cut.

  The full text of output must be "logged in as: username", but it is force into a small space and cutting the username like this:

  Connected

  as:

  username (this line is not visible in the toolbar)

  Here is my code.  Any help is appreciated.

  ...

  "< af:pageTemplate viewId="/oracle/ui/pattern/dynamicShell/dynamicTabShell.jspx "value =" #{bindings.ptb1} ' "

  ID = "pt1" >

  ...

  < f: facet name = "globalToolbar" >

  < af:panelGroupLayout id = "pgl5" layout = "horizontal" valign = "top" >

  < af:toolbar flex = '1' stretchId = 'stretch1"id ="tb1">

  < af:group id = "grp1" >

  "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.dashboardSelected} "id ="cil1"icon="/images/AsIconDashboard.png "partialSubmit ="true"/ >

  "" < af:commandImageLink text = "' actionListener =" #{tabmanagement.toggleSelected} "id ="cil2"icon="/images/AsIconToggle.png "partialSubmit ="true"/ >

  < / af:group >

  < af:spacer id = "stretch1" width = "10" height = "35" clientComponent = "true" / >

  < af:outputText id = value = "#{tabmanagement.loggedInAsText}" / "loggedInAsOT" >

  < / af:toolbar >

  < / af:panelGroupLayout >

  < / f: facet >

  ...

  Move text output of the globalToolbar facet in the facet globalSearch fixed problems and gave me the results:

  ...

  Icon="/images/AsIconDashboard.png" partialSubmit = "true" / >

  Icon="/images/AsIconToggle.png" partialSubmit = "true" / >

  ...

  ...

• Dynamic tab does not display data

  11.1.1.4, JHS 11.1.1.3 JDev
  
  I have a table with a groupLink field that opens another group in a dynamic tab. When I put in a debug output I see the underlying view for the new dynamic tab performs a query to the top the correct data, but when the tab opens, it says 'no rows found. I have a couple of other groupLinks on other pages, one of which works, one of which gives the same result as this one. They are all setup according to the instructions in the JHS Developer's guide. Any idea, that all would be appreciated.
  
  Here's the JDev console output (lines starting with 'Debug' are my output inserted in the executeQuery method):
  
  < BreadcrumbManager > < processBreadcrumbs > processBreadcrumbs of execution for null
  < BreadcrumbManager > < loadBreadcrumbConfig > loadBreadcrumbConfig: pagePath is null
  < SetCurrentRowBean > < run > call queryByKeyValue on module app with voUsage MyView1 and rowKeyValue 1028
  < JhsApplicationModuleImpl > < queryByKeyValueInternal > queryByKeyValueInternal(value=1028) of execution for MyView1
  < JhsApplicationModuleImpl > < queryByKeyValueInternal > queryByKeyValueInternal of execution (key = Id value = 1028) to MyView1
  Debug - execute query
  Debug - SQL [statement]
  Debug - 1 lines found
  Debug - found = 1028 line ID
  Run < JhsPageLifecycle > ValidateRegion < validateRegion > to the com_pq_tracs_view_pageDefs_AccountsPageDef_WEB_INF_adfc_config_Accounts_xml_AccountsTaskFlow region
  Run < JhsPageLifecycle > RefreshRegion < refreshRegion > to the page fragment current region com_pq_tracs_view_pageDefs_AccountsPageDef_WEB_INF_adfc_config_Accounts_xml_AccountsTaskFlow: / AccountsTaskFlow/accounts
  < JhsApplicationModuleImpl > < applyBindParams > applyBindParams of performance for Lookup1
  < JhsApplicationModuleImpl > < applyBindParams > ViewObject Lookup1: bind the values of the parameters have not changed, no. Requery performed
  < JhsApplicationModuleImpl > < applyBindParams > applyBindParams of execution for Lookup2
  < JhsApplicationModuleImpl > < applyBindParams > ViewObject Lookup2: bind the values of the parameters have not changed, no. Requery performed
  < JhsApplicationModuleImpl > < applyBindParams > applyBindParams of execution for Lookup3
  < JhsApplicationModuleImpl > < applyBindParams > no binding query parameters not passed in applyBindParams for Lookup3, do nothing
  < JhsApplicationModuleImpl > < applyBindParams > applyBindParams of performance for Lookup4
  < JhsApplicationModuleImpl > < applyBindParams > ViewObject Lookup4: bind the values of the parameters have not changed, no. Requery performed
  < BreadcrumbManager > < processBreadcrumbs > processBreadcrumbs of execution for/AccountsTaskFlow/accounts
  Common thread of < BreadcrumbStack > < add > add stack: "null" (accounts/AccountsTaskFlow /)
  < BreadcrumbManager > < processBreadcrumbs > processBreadcrumbs of performance for /UIShell

  Steve,

  I think you hit a problem that we solved in the next version.
  Can you try to replace the macros GROUP_HAS_ROW and PARENT_GROUP_HAS_ROW of common.vm with the code below?

  #macro (GROUP_HAS_ROW)
  # Through viewObject instead of current line directly from binding of the iter
  # a query of entire table otherwise will be always performed during automatic query off!
  # but we express it only self-investigation turned off, otherwise the alyout form, the
  # switch element shows 'no line '!
  #if ($JHS.current.group.databound) #if ($JHS.current.group.autoQuery) #ITERATOR (.currentRow)! = null #else (#ITERATOR (.viewObject)! = null and #ITERATOR (). viewObject.currentRow! = null) #else (true) #end #end #end

  #macro (PARENT_GROUP_HAS_ROW)
  #if ($JHS.current.group.databound & $JHS.page.group! = $JHS.current.group) #if (${JHS.current.group.parentGroup} & ${JHS.current.group.parentGroup.databound}) #if ($JHS.current.group.parentGroup.autoQuery) #PARENT_ITERATOR (.currentRow)! = null #else (#PARENT_ITERATOR (.viewObject)! = null and #PARENT_ITERATOR (). viewObject.currentRow! = null) #end # true else #end #else (true) #end #end

  Steven Davelaar,
  Jheadstart team.

• I'm having a problem with the tabs is not responding after deleting localstore.rdf

  After the 4.0 update b7, I had a problem with my toolbar to reset and (a little), I corrected by deleting localstore.rdf. Now, however, my tabs do not respond when you click them, and Firefox is essentially locked on the first tab ideas?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: a new profile

• The browser always opens with 10 tabs home, not just 1.

  Whenever I open the browser instead of just the home page, 10 tabs are filled with home pages.

  You can check for problems with the sessionstore.js file in the Firefox profile folder that stores the session data.
  When sessionstore.js is deleted, you lose App Tabs and groups of tabs and tabs open and you will have to recreate them, so possibly make a note or bookmarks.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Qosmio x 870-Drag & drop with alt - tab is not possible using the touch pad

  Hi all

  I have a problem with my Qosmio x 870 and drivers touchpad Synaptics on Win7 64 bit.
  They do not drag-and - drop between applications.
  As soon as I press Alt - Tab, all by dragging a file to switch to one another application, dragging instantly stops.

  I use official & later (15.3.41.7) drivers of Toshiba touchpad http://goo.gl/pKHAI here

  I tried to install the generic Synaptics drivers and they do not have such a problem.
  With them, everything works very well with drag and drop.
  However, their implementation of two fingers to scroll is really buggy and more than half the time it does not work so I can't use them.

  Does anyone know if this bug and when?

  Any help? Thank you!

  Hello

  Maybe you should check the settings in
  Control Panel-> mouse-> advanced-> Advanced Settings tab

  There is an area called operations during key entry
  Make sure that the options are not checked.

  You said you tried the driver generic Synaptics you chose this one:
  http://www.Synaptics.com/resources/drivers

• OSX El Capitan - bridge and switch program with cmd + tab, does not always

  Hi all

  We are having the same problem on iMac 5, El Capitan and whole Addobe CC Pack running.

  Formerly bridge freezes a bit and sometimes cmd + tab I does not. The user can switch program´s if they tap the icon in the dock.

  The iMac´s have been respect resettled 3 months ago - Imac 27 "in 2013, 32 GB of ram, 1 TB latest version by car, Wacom Intuos 4, Fuzion Adobe CC, 1 screen next to the generation of 27".

  Hope to hear from someone out there

  Hi Allan,

  We released a new version of THE bridge bridge CC 2015 July 19, 2016. Please install from your application client creative cloud and check if the problem persists.

  If bridge CC 2015 does not appear under the applications Panel, click the gear icon and select 'Search app updates' or sign out and sign back to the creative cloud desktop application.

  I tried to run the cmd + tab switch between google chrome and bridge CC 2015 on Mac OSX 10.11.6 the workflow and I faced no question too.

  Kind regards

  Gerard

• I need assistance with the transparent background not made

  I recently bought the BlueFx ultimate lower third Megabuck with Adobe Effects 13.7.2. I am currently changing my current project on Camtasia Version 2 Mac. I also bought the new open 2 with BlueFX and had no problem by adding text, changing colors and make the file for my new open. Everything was going well until I started working on the lower third. By changing colors and adding text were no problem, but when I went to make the black background is always showing and there is no transparency. After Googling it and reading some of the threads of this forum, I went back and clicked on the bottom graph BC, they said it was for transparency, but he has not yet worked.

  What I have read you are supposed to be in the defined format in Quicktime, channel: RGB + Alpha, depth: MultiColors + color: tangled. Also, Format Options: PNG. It's on "Animation", but that has not worked. So far ALL I get after MANY renderings is my low animation third with a black background.

  I could REALLY use some help here because I am confused.

  Frankie

  

  

  Camtasia is does not support alpha channels. I use it because I have a screen cap app that does a much better job for me. If taken Camtasia support alpha channels, you should be able to find something in the help files or settings to turn it on. The problem is with Camtasia, not AE. I would check with their customer.

  I would never do my final Assembly in a screen Cap program. A NLE such as Premiere Pro goes much faster and have much better audio tools and it is easier to call outs and mix with other media.

  I apologize for the lack the only problem you had was with Camtasia. Maybe I was able to save 3 hours.

• Map integrated with the tabs Panel not centered

  When I integrate the html code of google maps to a panel tabs for a given location, that location does not appear in the center of the map, but is right next to the map in the upper left corner.  In preview mode, property is centered, but publish mode it is biased.  Any suggestions? Web site: www.netlease.net, hit page: available properties

  Hello

  I tried to check the url of the site and position pointer seems to work very well, I think you've already fixed.

  If this isn't the case, then please let me know.

  Thank you

  Sanjit

• Dynamic tabs Shell Docs/tutorial

  I have spent a lot of time looking for documentation on this point - please prove me a retard and provide a link. Thank you!

  Trouble finding documentation is a lot of relevant links in the forum and maybe also point to the wrong location because of a recent migration of OTN. Redirects are underway with the OTN admins. Used, of course, like a band-aid until we can update all the links - manually.

  Meanwhile the method more reliable and perhaps the long practice of obtaining information on this model is to install the documentation locally as an extension JDev. It is very easy to do. Just follow the steps here:

  http://forums.Oracle.com/forums/Ann.jspa?annID=1272

• Oracle adf dynamic Scroll tab shell

  Hi all

  I use 11.1.2.4.0, i developed ADF application with shell tab dynamic Oracle JDeveloper.

  the problem is that I have a few pages too large jsff, should I add scrolling to the dynamic tab?

  Kind regards

  If you use a container that can be scrolled if the area is too small, it should work out of the box. Check Oracle ADF: a model with a behavior, if you add a scroll of type panelGroupLayout to the region, it should amine if the tank is too small.

  Timo