-Amplitutde and Compression effects

Hello everyone.

Would you explain how much Compression Do?

Thank you very much.

Compression is one of the most useful effects, he very probably asked is on the majority of the securities if speech or music.

All sound recording gives you a dynamic range - which is actually the difference between the quietest part of the signal and the strongest.  In an ideal world you can leave it as is, but most of the time when you mix, if you define things for strong peaks, quiet rooms will be lost.  Alternatively, when someone is listening to your mix on headphones on a noisy bus or something, to hear the bits alone, you need to have the volume up so strong parts would hurt your ears.

.. .and what is that compression.  It allows you to control the dynamic range of your recording.  As a general rule, you can configure it so that it refused the strongest bits and the two leaves the quiet bits along or, sometimes, it can turn up the quiet bits while limiting stronger parts.

The problem is that controls to implement the effect of compression can be somewhat complicated to learn.  The simplest (and very useful) in Audition's effects/Amplitude and Compression/dynamics.  The default setting for this is a GUI rather than buttons and numbers.  If you spend a little time looking at the blue line, it gives you (and perhaps by examining some of the presets) you can see how, by putting mark on the blue line and dragging them, you can set it that way, for example, nothing can be more stronger than-6dB, then things between-30 and -15 are a little stronger (do not take these figures as anything other than an example besides).

By the way, the Compression is usually used with a feature called "Embracing Gain" which raises levels to compensate for the limit you may have applied to the summits.  This can be in the compressor itself or using the feature to 'Normalise' under the menu even Amplitude and Compression.

FYI, in addition to the treatment of the dynamics I mentioned, hearing has several other compressors - tube multiband, single Strip, modelled and so on.  They do things a little different, but I will not try to confuse you by their review.

Finally, if you want to read about some details more compression/dynamic transformation, you can take a look at dynamic - processor technology and Applications on the site "Rane Notes."  It's hardware compressors but those of hearing works the same, and it gives a good description of what the various controls.

I hope this helps.

Tags: Audition

Similar Questions

  • Adobe Audition singing remove compressed effect?

    Hello

    I use Adobe Audition CS6 and I try to use the Vocal effect remove, but I hear still vaguely singing and compressed drum sound. In addition, the voices are more soft and delayed sometimes.

    Is there a way to delete the song still further and make the less compressed sound of drums and singing not delayed?

    Thank you

    -Sam

    You can experiment with the settings in the center channel Extractor, but it is unlikely that you will get much better.

    Remove song depends on how the original mix has been exhausted and the differences in phase, that it is.  If your mix had the voice, because the only thing Pan centrally with everything panned biased then you can get an almost perfect result.  However, this type of pan is rare and something else Central pan will also be affected while things like stereo reverb on voice will not be eliminated.

    The center channel Extractor has some nifty tools to get the best that you can come out of this, but it is rare to get perfect results.   The usual analogy is that you try to unbake a cake and it is very difficult to meet uninterrupted with pure flour and eggs.

  • I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

    I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

    This could be a problem of twitter than compresses uploaded photos?

    Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

    Mylenium

  • Question about Workflow between Premiere and After Effects

    Hey guys, I have Production Premium CS5 (Premiere and AE)

    One thing that has always confused me was between these 2 products basic workflow.  Is it better to your clips, but them in sequence, make effects of base than first supports and the highest quality video output to take into AE and apply effects?

    Or do I take videos, my After Effects work, export as a clip that will then be used in the video composition in first?  I know I don't want to pass a too often because of the compression, then that would be the most optimized workflow?

    For the record, I do a lot of video game of frag movies, so I have many effects, I want to put in it.

    Your best bet here is to take advantage of dynamic linking.  Any changes made to a comp in AE automatically appear in the component in first, no rendering or exporting required.

  • Copy and paste effects between clips

    Is it possible to copy and paste effects between clips and overwrite the previous settings?  When I just stick your ads in existing settings, which means that I have to delete everything before gluing

    Not at the moment. A command "Delete attribute" is something that several people have asked. Use Final Cut Pro--> provide Final Cut Pro Feedback... to add your voice to this request.

  • Win 10 "threshold 2' very strong use of the processor by process"system and compressed memory.

    I did a clean install of Windows 10 threshold 2 (aka version 1511) on my MBP 15 "2015 and I encountered a problem. Well two actually:

    1. installing the Realtek driver hangs when you install the software in support of BC. This is easily fixed by killing the process RealtekSetup.exe.

    2. the process of "system memory and compressed" now use constantly one of the eight nuclei which ruins the life of the battery. I had to actually change the power management in Windows to allow the CPU to only go to the maximum frequency of 60%.

    Some research on Google, I have gathered many suffer from this problem on other brands and it is usually linked to a bad driver. I was not able to find the culprit yet unfortunately.

    Now, here's my question: did someone suffering from this issue as well and if so, where you be able to solve it?

    Thank you!

    Try / sleep or hibernation.

  • Picture and sound effects disappear from my project when I open

    I change my project and insert the photo and its effect in my project, I save it, when I open the next day I get a red sequence rather my sound effect and a photo

    Please post a screenshot of your timeline and clip browser.

    Thank you.

    Russ

  • No voice in the audio, only music and sound effects - while playing the movie in Media Player

    Original title: Media Player

    I get everything on trailers, but when I get to the movie there is no audio voice only music and sound effects, how can I fix it's on media player and centre

    Possible solution:

    After spending the afternoon to tackle this (troubleshooting, downloads driver updates, etc.) I just found out that my subwoofer cable is bad!  If I raise to create a good connection, the sound is fine... until I can replace it.  Then you can try it.  :)

  • First and After Effects crashed. Uninstalled is not for them. Use the cleaning tool. I deleted everything else. Tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

    Hello team,

    First and After Effects crashed.

    I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).

    I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.

    I deleted everything I found CC remaining manually.

    I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.

    I don't know what to do anymore.

    Could someone help me?

    Virginia

    I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.

  • Upgrades require reinstalling Photoshop and After Effects filters

    Confound it Adobe, I have more than 50 third-party filters in Photoshop and After Effects and you are updates always force me to reinstall them. Surely there is a way you can upgrade without wipe these stars every time!

    [As published for the clarity of the question and the future forum search... MOD]

    Hi Jacquess,

    Photoshop 2015.5 CC is a major version update it will install completely separate from the current version of Photoshop CC (version 2015.1.2) and have a separate plug-ins folder.

    Then, you must reinstall all of your Plugins, check the Web site or updates to plugins manufacturer and install your plugins.

    You can check the crawl space of digital imaging of Jeff Tranberry | Adobe Digital Imaging tid - bits, served in a dirty ashtray.

    Kind regards

    Assani

  • The Bokeh (Defocused backgroud) on Premiere Pro and After Effects effect

    I have Premiere Pro and After Effects and I want to do the effect 'Bokeh '... How can I do this?

    Preferably, I really want to use Premiere Pro.

    I want the subject to focus, but the background must be defocused very, very blurry so that only the object is visible.

    Thank you

    Copy the clip,

    Overlay,

    Use a mask opacity on the subject in this clip,

    Fade less attached.

  • overhead dedup and compression

    I enabled dedup and compression in a cluster of 4 guests with 1.56 TB of usable space, and I see that the overload of compression and dedup is 85GB.

    How is the space for the overhead of compression and dedup calculated? Is it possible to predict?

    Estimate the General needs of the format the virtual disk SAN.

    = Format on disk version 3.0 and later adds an additional burden, usually no more than 1-2

    percentage by device capacity. Deduplication and compression with active software checksum

    require additional overhead of about 6.2 percent capacity per unit.

    Page 24: http://pubs.vmware.com/vsphere-60/topic/com.vmware.ICbase/PDF/virtual-san-62-administration-guide.pdf

  • How to convert a 2D Image into 3D to create a video with still photograph old 3D Photo converted video 2d style 3D (Photoshop and After Effects)

    Hello

    How to convert a 2D to 3D Image

    Create a video with always shoot in 3d

    Old Photo converted to 3D as video 2d

    (Photoshop and After Effects)

    Thank you

    It's called a cinemagraphs.com. You slice the image in the foreground and background elements, plug the holes and then place them in a 3D space - in after effects or a 3D program, no PS

    Mylenium

  • HI, I want to be adopted, the Prime Minister and after effect... what I please

    HI, I want to be adopted, the Prime Minister and after effect...

    I have a window of 10. I am a beginner

    What should I do please?

    Hi Khaled,

    I checked with your Adobe ID / Email ID on the forums and did not find any subscription registered ago bought.

    So, if you are trying to install the evaluation version of 2015 CC of these please refer to the below given link:

    Download and install Adobe Creative Cloud apps

    Let us know if that helps.

    Kind regards

    Sandrine Bani

  • Is it possible to have cc photoshop and after effect cc? instead of cc of photoshop and lightroom cc? because im not not using lightroom and I would like to replace it with after effect

    Is it possible to have cc photoshop and after effect cc? instead of cc of photoshop and lightroom cc? because im not not using lightroom and I would like to replace it with after effect

    Hello

    You have a plan of photography which includes Photoshop and Lightroom. Replacement of lightroom with AE CC is not possible with the current subscription. You can go for creative cloud all apps which includes any software or subscription only app for Photoshop and AE.

    You can check https://creative.adobe.com/plans

    or contact the Adobe customer support contact customer service

Maybe you are looking for

  • Toshiba LCD 8 "Panel - need pinout diagram

    I bought this LCD monitor (part # LTA080B820A) precisely because he says that he has input RGB analog instead of digital inputs that accept most of the LCD.http://www.geeks.com/details.asp?invtid=LTA080B820A&cat=Mon Now, I need to find a pinout diagr

  • Hanging of USB 2 card

    My card USB 2 used to work, then I reformatted my hard drive to get rid of the junk and now when I insert it, you thing just hangs and I have to disconnect everything. It seems trying to start a backup, file transfer and I tried to work around this p

  • 4GB CF card in XP - type partition not there place and only 2 GB

    Hello I have problems with my Toshiba 4 GB (Toshiba THNCF4G09QG) CF card in the PCMCIA (for IBM microdrive actually) adapter in my laptop.I tried to format my Canon ixus 5 and XP pro (FAT and FAT32), and both show only 2 GB. Under XP I then used the

  • Indexing on front panel controls

    Hello I have a large number of controls on my front. Is it possible to reference programmatically with an index instead of wires to each control on front? Thank you Matteo

  • Upgrading a dv6000 to 4 GB of ram

    Hello I dug just my old HP and would like to get a few programs running that are not available on Mac. Most of them need 4 GB of ram, however, and my laptop, according to Crucial system scanner can support 2 GB. I'm no expert on upgrading a laptop an