An array of objects with a filling loop. Noob PHP question.

Similar Questions

• FGV VI within the class method called the array of objects in a for loop

  I have an array of objects connected to the loop for I call the VI method on the object in the loop for. If the method uses/calls some VI with state/memory (such as FGV) State is shared for each method call in a loop despite the called VI is reentrant preallocated. Someone knows how to fix this?

  NVM. I found an answer:

  https://lavag.org/topic/19014-dynamic-dispatch-shared-reentrancy/

• Finishing tool for objects with no fill (transparent)

  Is it possible to create a mixture using the mixing tool with one of the objects to mix transparency (with no fill or a diagram)? If not, could someone please suggest an alternative? I know that I can do something quite similar to gradients, but I really like the mixture control level provides.

  Thank you very much in advance

  Joe Stavitsky

  Set opacity to zero

• With the help of objects with one fill to cut through another

  Sorry for clumsy description in the subject line. Do not know how to look for a solution to this, but it's probably pretty simple.

  This is Illustrator CS3 on Mac. Everything is on a single layer. I used the white alterations forms to fine tune black objects below. I would like to meet constantly so I can be left with the black forms (for a color simple screenshot). Is there a way to 'collapse', objects and constitute an Illustrator to eliminate white? I tried everything in the Pathfinder palette without results I'm after.

  Any suggestions?

  Thank you!

  Brad

  

  a number of questions arise that I see your design:

  1. you send the file to someone to be "silkscreen"?

  2 - is any vector art?

  3. print the gray background?

  IF the gray background doesn't print - delete.

  IF all vector art - make sure that white objects are NOT defined for a recovery - make sure of course black objects are really black and not a RGB or CMYK build.

  IF you send files to someone ' one - after doing what I said above - save as PDF - using the parameters of "high quality print".

  send file

  to test the separations - try to print (assuming you have a connected printer)

• Array of objects display BPM with JSP HOWTO

  Hello!
  
  Could someone please tell me, how to list the elements of an array of objects BPM with JSP? The object has attributes, and I do not know the length of the array in advance, so I would need some kinf of loop.
  
  I have not found any documentation or forum thread on this subject, and I'm out of ideas.
  
  Thanks for any help!

  Hello

  Please find the code below. Hope this code will help you

  <% int count = 0; %>
  
                      
       
       
       
       
       <% count++ ; %>
  

  Sidonie

• Fill several objects with an image

  What's his name when I want to fill several different geometric objects with image «one»  I don't want the fill to be scaled down to fit each object.  Instead, I want to be able to see the whole picture of the research at all together to geometric shapes.  I hope it's clear. Thank you!!

  Steven Houtzager

  Steven,

  In addition to what Monika said, with a clipping mask, you must first select all of the objects and the object > Compound Path do.

  If they overlap each other, you may need a few more to operate properly; in this case, you can use the alternative of an opacity mask: select all objects turning white or black if not already, then Ctrl / Cmd + G to group them, and then in the transparency palette dialog box click the opacity with ticked Clip mask and mask invert checked (if they are black) or unchecked (if they are white).

• Objects in full expansion with a filling

  Hello

  I wonder of there is a way to develop objects with a trim, without creating the lines outside of the nuances that you did to create a fill.

  

  I add a printscreen... The first F is filling, the second is a hierarchical view of the extended seal and the last I want to create. How I create, remove the squares and use pathfinder but it take a long time to do.

  Thank you

  Just hit Pathfinder > harvest, then Pathfinder > unit after expansion.

• Flattening of an object with a race created to fill shifts. Not good.

  Flattening or enlarge an object with a padding of race creates the filling negatively offset half the distance of the sketch of the race.

  Flattening or enlarge an object with an outside boundary creates the fill positively offset the distance of the sketch of the race.

  Flattening or enlarge an object with an indoor or outdoor race creates the negative fill offset half the distance of the plan inside of race.

  Why is this? This is a provision of trapping?

  Can I change the default values in expansion?

  Apply the effect > path > hierarchical object to filling before developing

• Selection of objects from the fill color

  Hi guys

  Is possible to select a color to CMYK using JavaScriptobject?

  I want to group multiple objects with the same fill color.

  Thank you very much for your time...

  Please see the picture below...

  

  Hello Puthoskey any good?

  Well, I wrote something like what I said, notes:

  This code works just to PathItems;

  Just CMYKColor;

  You must select a pathItem before running the script.

  Read selected item fillColor and a loop in all pageItems document, if the pageItem is a pathItem and having the same fillColor or strokeColor, it will be grouped with others;

  If you want to do it in other objects like textItems, you must follow the same logic;

  Try, test and enjoy, contact us for more rule.

  function selSameColor (){
  
      if(app.activeDocument.selection.length == 0){alert('Select a pathItem.'); return};
      if(app.activeDocument.selection.length > 1){alert('Select just one pathItem.'); return};
  
      var selFillColor = function(){
  
          var groupColor =  app.activeDocument.groupItems.add();
  
          if(app.activeDocument.selection[0].typename == 'PathItem'){
          var colorSel = new CMYKColor;
          colorSel.cyan = app.activeDocument.selection[0].fillColor.cyan;
          colorSel.magenta = app.activeDocument.selection[0].fillColor.magenta;
          colorSel.yellow = app.activeDocument.selection[0].fillColor.yellow;
          colorSel.black = app.activeDocument.selection[0].fillColor.black;
          }else{alert('This is not a pathitem.'); return};
  
          var itemsLength = app.activeDocument.pageItems.length;
          var items = app.activeDocument.pageItems;
  
          for (i = 0; i < itemsLength; i++){ 
  
              if(items[i].typename == 'PathItem'){ 
  
                  if(items[i].fillColor.cyan == colorSel.cyan && items[i].fillColor.magenta == colorSel.magenta && items[i].fillColor.yellow == colorSel.yellow && items[i].fillColor.black == colorSel.black){
                      items[i].moveToBeginning(groupColor);
                  }else if(items[i].strokeColor.cyan == colorSel.cyan && items[i].strokeColor.magenta == colorSel.magenta && items[i].strokeColor.yellow == colorSel.yellow && items[i].strokeColor.black == colorSel.black){
                      items[i].moveToBeginning(groupColor);
                  };
              };
  
          };
      if(groupColor.pageItems.length > 0){groupColor.selected = true};
      };
  
      selFillColor ();
  
  };
  
  selSameColor ();
  

  I hope this useful, see ya soon man.

  Best regards

  -Vinícius Baptista

• How to upgrade an array of objects?

  Dear friends,

  I have a number of objects stored in a table.
  It seems that the table does not point to objects, but has copies.
  The element of the array is only updated with the notation table [index] prop, not with the object.prop notation.

  It would be possible to always use the prop table [index] notation for an update of the issues, but I want to understand why the other method does not work. And of course, there should be no copy...

  var objArray = [oObject0, oObject1, oObject2];    
  
  function oObjTpl (name, scheme, start, incr, current, decimals, items) { // 'prototype' definition
    this.Name =       name;
    this.Scheme =     scheme;                       // numermic | roman | ROMAN | text
    this.Start =      start;                        // start value
    this.Incr =       incr;                         // increment, may be a formula string
    this.Current =    current;                      // Last inserted value or item
    this.Decimals =   decimals;                     // relevant only for numeric scheme
    this.Items =      items;                        // array of list items, relevant only for text scheme
  }
  
  var items0 = ["one","two", "three", "four", "five", "six", "zz", "seven", "eight", "nine", "ten"]; 
  var oObject0 = new oObjTpl ('CountingEN', 'text',     1,  1, undefined, undefined, items0);
  var oObject1 = new oObjTpl ('oObject1',  'numeric', 17, -1, undefined,         0, undefined);
  var oObject2 = new oObjTpl ('oObject2',  'roman',    1,  1, undefined,         0, undefined);
  
  // replace the zz by soemething else
  oObject0.Items[6] = "AAAA";       // this does not update objArray
  $.writeln (objArray[0].Items);
  
  objArray[0].Items[6] = "BBBB";    // this updates objArray
  $.writeln (objArray[0].Items);
  
  oObject0.Items[6] = "CCCC";       // update of objArray effective in next run
  $.writeln (objArray[0].Items);
  

  When you run the script 3 times, I get this console output:

  one,two,three,four,five,six,zz,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  Result: undefined
  one,two,three,four,five,six,CCCC,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  Result: undefined
  one,two,three,four,five,six,CCCC,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  Result: undefined
  

  Thank you Apollo, but this has not been around.

  But I found that the order of definitions is crucial here. The following works as it should:

  function oSeries (name, scheme, start, incr, current, decimals, items) { // 'prototype' definition
    this.Name =       name;
    this.Scheme =     scheme;                       // numermic | roman | ROMAN | text
    this.Start =      start;                        // start value
    this.Incr =       incr;                         // increment, may be a formula string
    this.Current =    current;                      // Last inserted value or item
    this.Decimals =   decimals;                     // relevant only for numeric scheme
    this.Items =      items;                        // array of list items, relevant only for text scheme
  //return this;      // ahs no effect
  }
  
  var items0 = ["one","two", "three", "four", "five", "six", "zz", "seven", "eight", "nine", "ten"];
  var oSeries_0 = new oSeries ('CountingEN', 'text',     1,  1, undefined, undefined, items0);
  var oSeries_1 = new oSeries ('oSeries_1',  'numeric', 17, -1, undefined,         0, undefined);
  var oSeries_2 = new oSeries ('oSeries_2',  'roman',    1,  1, undefined,         0, undefined);
  
  var aSeries = [oSeries_0, oSeries_1, oSeries_2];    
  
  var a1 = aSeries[2].Scheme;      // roman
  $.writeln (a1);
  
  // replace the zz by octogon
  oSeries_0.Items[6] = "AAAA";   // this does not update aSeries
  $.writeln (aSeries[0].Items);
  
  aSeries[0].Items[6] = "BBBB";  // this updates aSeries
  $.writeln (aSeries[0].Items);
  
  oSeries_0.Items[6] = "CCCC";   // update of aSeries effective in next run
  $.writeln (aSeries[0].Items);
  /*
  one,two,three,four,five,six,AAAA,seven,eight,nine,ten
  one,two,three,four,five,six,BBBB,seven,eight,nine,ten
  one,two,three,four,five,six,CCCC,seven,eight,nine,ten
  */
  

  The order is now: implement the objects and then set up the array of objects.

• How to put an external glow on a shape with no fill effect?

  Hey everybody.

  
  

  I need to have form stoke No Fill/No with the outer glow effect. I tried but all in vain. I fill the shape with white and then put multiply, but this multiple effect, making the two invisible. When I go into the layer and change the fill multiply then the outer glow seeps into the form, and it's not what I want.

  
  

  My form is a form of lotus/Crown. Screenshot attached.

  I need to this 1 highlighted the form striking the outer glow that is present on the 2nd form but with no fill.

  Kindly help me out here. As I had struggled with this problem for over a week now, to start from forum to forum and tutorial tutorial but without success.

  Thank you.

  
  

  make your object with two fillings in the appearance palette.

  give the upper fill opacity to 0%.

  Apply an outer glow for the background fill.

  Select the object in the appearance palette (i.e. the entire object is selected, not one of its individual fillings).

  in the transparency palette, check the piercing group.

• How, in Illustrator CS5, select all objects with the three points (or nodes)?

  I'm fairly new to Illustrator, but it seems like it should be simple.  (It's trivial in CorelDraw X 4: after selecting an object with three knots, I go to Edition > search and replace > find objects > find objects that correspond to the currently selected object and navigate the menus left.)

  In Illustrator CS5, select options > identical do not seem to include the selection of all objects with the same number of nodes under the currently selected object.

  A double click on the magic wand tool also does not provide such an option.

  Thanks for any help.

  PS also useful would be knowing how to add other criteria to this search, for example, how to select all objects with three points * and * the current fill color.

  advictoriam,

  I'm afraid that you have better luck with the number of anchor Point.

• fade out / objects with flipping?

  Hey there,

  Is it possible to leave an object which is empty in normal mode, fade (and I don't mean transist but appear) when scrolling, rather than the sudden appearance?

  best wishes, lucas

  Hi Lucas

  You can define reports with opacity, but it works with no fill, so use the fillings and apply a minimum opacity with scrolling.

  Thank you

  Sanjit

• Problems with selection.fill/pathItem.fillPath--Ps CS6, JSX, Windows

  Hi all

  First post here

  I recently started playing with scripting languages javascript extended (jsx) Photoshop CS6 (using the 32-bit version on Windows 7 Ultimate).

  I had a lot of trouble with orders "fill."

  This person here gives me a

  Error 1200: Internal error

  Line: 5

  -> app.activeDocument.selection.fill (myColor);

  var myColor = new SolidColor();
  
  app.documents.add( 100, 100, 72, "tmp", NewDocumentMode.RGB, DocumentFill.TRANSPARENT );
  app.activeDocument.selection.selectAll();
  app.activeDocument.selection.fill( myColor );
  

  I read somewhere that all parameters to the fill method can solve it, but he gave me the same result.

  I also tried the PathItem fillPath method, but he also gave an error internal (1200).

  var myColor = new SolidColor();

  var app.documents.add = docRef (500, 700, 72, "single line")

  var lineArray = new Array()

  lineArray [0] = new PathPointInfo

  .kind lineArray [0] = PointKind.CORNERPOINT

  .anchor lineArray [0] = Array (100, 100)

  lineArray [0] .leftDirection = .anchor lineArray [0]

  lineArray [0] .rightDirection = .anchor lineArray [0]

  lineArray [1] = new PathPointInfo

  .kind lineArray [1] = PointKind.CORNERPOINT

  .anchor lineArray [1] = Array (150, 200)

  lineArray [1] .anchor lineArray = .leftDirection [1]

  lineArray [1] .anchor lineArray = .rightDirection [1]

  lineArray [2] = new PathPointInfo

  lineArray [2] .kind = PointKind.CORNERPOINT

  .anchor lineArray [2] = Array (100, 200)

  lineArray [2] .anchor lineArray = .leftDirection [2]

  lineArray [2] .anchor lineArray = .rightDirection [2]

  var lineSubPathArray = new Array()

  lineSubPathArray [0] = new SubPathInfo()

  .operation lineSubPathArray [0] = ShapeOperation.SHAPEXOR

  private lineSubPathArray [0] = true

  lineSubPathArray [0] .entireSubPath = lineArray

  var myPathItem = docRef.pathItems.add ('a line', lineSubPathArray)

  myPathItem.fillPath (myColor, ColorBlendMode.NORMAL, 100, true, 0.0, true, true)

  This example only works if there is no fillPath parameters given at all (it fills with black).

  Does anyone know how I could get around this problem? Is this a known bug?

  Thank you all!

  Hello Radsvid789,

  your script:

  var myColor = new SolidColor();
  
  app.documents.add( 100, 100, 72, "tmp", NewDocumentMode.RGB, DocumentFill.TRANSPARENT );
  app.activeDocument.selection.selectAll();
  app.activeDocument.selection.fill( myColor );
  

  Cannot run.

  As a first step, you must define the new SolidColor for example like this:

  var myColor = new SolidColor();

  myColor.rgb.red = myColor.rgb.green = myColor.rgb.blue = 0;

  Try this one:

  var myColor = new SolidColor();
  myColor.rgb.red = myColor.rgb.green = myColor.rgb.blue = 0;
  app.documents.add( 100, 100, 72, "tmp", NewDocumentMode.RGB, DocumentFill.TRANSPARENT );
  app.activeDocument.selection.selectAll();
  app.activeDocument.selection.fill( myColor );
  

  The same problem in your second example.

  Have fun

• Power supply an array of objects returned by a remote object using AMFPHP remote procedure calls.

  Hi guys,.

  I'm working on an AIR Application that uses Flex Remoting AMFPHP, the data type returned is an array of objects that contains a shot of a url to an image on the server, how to link it to a tilelist component, so I have a list with images representing the icons and the string representing the Tilelist labels?

  We assume that the object has these fields:

  -label
  -image

  Thus, you can first pass the array to the dataProvider of the TileList and make an ItemRenderer (with a label and an image). Then, in the ItemRenderer, go to the fields with the data objects:

  ItemRenderer.mxml