An attack has been detected from your system. Please contact the system administrator.

Similar Questions

• System Restore has been disabled by your system administrator

  Problem of administrater

  Hello all, I thought that my problem was a simple one but not so much. I am logged on as administrator Windows 7 Ultimate, I went to restore my system files and is turned off by mistake, while I thought was not a problem, I knew not that it deletes the system restore all files, so here I am again to make it back on and guess what, it is said that the administrator should be informed that they are off their After trying several ways to achieve this, I resorted to no protection on my UAC, it has not helped, tried a new UAC which did not help either, so now I'm on my hands and knees hoping someone out there can help, after such a simple mistake that I was allowed to do because I was Admin , I went to not even be able to system restore back on without contact my administrator! Is any way around this, there must surely be, any help would be greatly apreciated.

  Steve.

  Hi Steve,.

  Step 1: Use the Group Policy Editor

  a. Click Start, type gpedit.msc and press ENTER

  b. go to the following branch: Computer Configuration | Administrative templates | System | System restore

  c. double click on disable the Configuration and set it to not configured.

  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.

  d. Quit Group Policy Editor.

  If using the Group Policy Editor do not fix the problem, try the registry fix from the following.

  Step 2: Using the registry editor

  Important: The below mentioned method contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  a. Click Start, type regedit.exe and press ENTER

  b. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  (c) in the right pane, delete the value named DisableConfig

  d. Quit Registry Editor.

  e. restart the computer and check

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• An inconsistency has been detected in your Interface.

  Hello
  
  I have some interfaces that extracts an Oracle system to a staging of Oracle database (and ultimately to Essbase). I use the LKM SQL for SQL.
  
  The question:
  The interface throws the following exception when opened after changing the context:
  Inconsistency detected
  An inconsistency has been detected in your Interface.  This is probably due to changes in your topology. Please re - save your interface.
  
  In addition, the LKM becomes LKM Oracle for Oracle (DBLINK).
  
  Is there something I am doing wrong?
  
  See you soon

  Probably you created the interface to record and then went to the topology change the context... Besides ODI give this warning. You must open the interface once more and to re-record. LKM Oracle to oracle (DBLINK) is the default value KM for this pair of technology... That is why it is back to the default KM. You can change it to your favorite KM.

  Thank you
  Fati

• the ibm product recovery feature has been removed from this system

  I have a thinkpad R51, and recently, I decided to reset to the factory settings. However, I also had installed linux and when I tried this it has failed and to restart, there was a grub error. As I was doing before, I put a CD in XP randomly and did a fixmbr, but this time, when I tried to restart the entire disk had disappeared. So now, windows no longer existed. Then I installed linux again and followed the instructions here: http://www.thinkwiki.org/wiki/Rescue_and_Recovery to allow grub to access the partition rescue and recovery and tried again.

  However, this time when I click on the "content of factory restore", all I get is a saying "the recovery of product feature ibm has been removed from this system"

  Is it still possible to reset this top of the Tower, or I have to install my own OS as if he is not a thinkpad?

  Thank you

  rolandFlagg wrote:
  What do you mean by "spare parts installation media? Do you mean buy a BONE altogether?

  Yes the commercial version of the XP operating system, you have the OEM version of the XP operating system.

• Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. What to do next?

  The complete error message that I receive is less when I try and install SQL Management Studio on a PC running Windows 7 64 bit running SQL Server 2008 R2. The only point is that Visual Studio is not installed then, how can I update something that is not installed in the first place. At the end of the day, I'm trying to install SQL Management Studio so that I can recover my backup of clients.

  Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. Please update all installations of visual studio 2008 sp1 by visiting Microsoft update

  My mistake

  

  Programs installed

  

  Hello

  Please read the following support article:

  https://support.Microsoft.com/en-us/KB/956139

  Maybe you have the Visual Studio Tools for Applications 2.0 installed.

  In addition, you can get a quick response with SQL Server related questions in the following forum:

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• Function HP 8600 locked for adjustment of color. Message reads as follows: adjustment of color has been locked by your system

  We cannot copy in color because this message pops up on our HP officejet pro 8600 premium: locked feature: adjustment of color has been locked by your administratar system or the person who set up the printer.  Copies will be in black and white.  How to rest the printer to copy in color?

  Hello

  Please follow the steps below to activate the color copy:

  1. Enter page EWS from the printer by typing the printer IP address in your web browser.
     To find the IP address, click the icon on the front panel of the printer's network and the INVESTIGATION period is listed.
  2. Enter the settings tab.
  3. Enter the parameters for the administrator.
  4. Under color access control, make sure that the copy of color is selected.

  Kind regards

  Shlomi

• Windows credentials have been disabled by your system administrator problem

  Windows 7 PC to c:\windows\system32\config\systemprofile\desktop is not accessible.  access is denied.

  checking my account 'owner' has of credentials have been disabled by the windows system administrator.  There is no other account on the PC, except 'owner '.

  I can't make another account apparently because I have no right to system more.

  can someone help me out here?

  Suggestions:

  1. If you go in Safe Mode, will you be able to run a full scan of your account?

  2. in safe mode, find you the admin rights at all?
  If so, do a system restore. Choose a date when you don't have a problem as your restore point.

  3. in safe mode with networking, you have administrator rights to download?
  If so, please download Malwarebytes. It is very good for fishing to the virus. Use it.
  If you are unable to download, you can go to your friend who has a computer, download the Malwarebytes and burn it to a flash drive or a CD, take home and run it on your computer.

  Link to download Malewarebytes:
  http://www.Malwarebytes.org/MBAM.php
  Way scroll and select the FREE download version. No need to buy it. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• malware has been detected: partially removed, how to remove the rest of it - operate: Java/CVE-2010-0840. EX

  Exploit: Java/CVE-2010-0840. EX

  The above malware was detected on my computer; has been partially removed, how

  remove the rest?

  Hello
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• "" Se error message "No. DVD player has been detected on your computer" when you try to insert DVD

  Original title: DVD and CD Driver problems and do not know what to do! I need help...

  My dvd drive is not detected. For example, when I insert a cd, I can hear it running, but it is not bring up windows media player or DVD does not play. I ran a fixed and got Player error: No. DVD 2 was detected on the computer, and 2nd mistake was this player Windows Media can not be placed in properly and may not work as expected. He told me that the two problems are not fixed. I also follow steps start clicked then clicked on computer and then under duct only showing local disk C: and hp recovery D: I do not see a DVD or CD drive. Please help me it is frustrating.

  Hello

  
  1. what fixit did you run?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the status in Device Manager?
  
  Run the FixIt mentioned below, if you have not tried and see if it helps.
  http://support.Microsoft.com/kb/314060
  http://support.Microsoft.com/mats/windows_media_player_diagnostic
   
  Hope this information helps.

• "diagnoses have been disabled by your system administrator.

  How can I fix it?  I am, of course, the admin...

  Thank you

  Is the same thing you has done, and uninstalled & reinstalled office - still NO GO.

  Finally, start the registry editor & sought "diagnostics" under "HKEY_USERS" and found

  'DisableOffDiagnostics' was set to '(1) '.   Also "NoOfficeSessionsLogging" has also been updated '(1) '.

  I changed both to account (0) & that restored ALL the Diagnostics Office.

• This operation has been cancelled due to restrictions on your computer. Please contact your system administrator.

  Title: original operation canceled
  When I start right click then properties, this happens "this operation has been cancelled due to restrictions on your computer. Please contact your system administrator. "Same thing happens when I click on the taskbar and Start Menu. Also, there are very few programs listed in the start menu. Can someone find it?

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, since it has no Group Policy Editor in XP Home and only
  really does not tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• Error: "your account has been disabled. Please, see your system administrator.

  Original title: accidentally disabled administrative account in windows XP

  When I was trying to figure out how to remove the login screen, I turned off accidentally my own admin account once I have restart my PC log on screen always there and says "your account has been disabled. see your system administrator. I don't have guest account on the computer and now I can't log on. I've tried safe mode, but could not = (.. What do I do?)

  using Windows XP Media Center Edition

  y at - it a way to get to the page of the log on screen computer management to enable administration account... Please help me.

  Hi NineFoxes,

  1. have you tried to connect to the same account in safe mode?
  2. do you think that user built-in in Safemode administrator account?
  3. what happens if you press Ctrl + Alt + Delete in SafeMode on the login screen?

  The built-in Administrator account cannot be disabled. We recommend that you check if there is a visible administrator in safe mode and login to the other user account admin user account.
  See disable or enable a user account

  Please provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C660D - a problem with the cooling system has been detected

  My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

  I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

  I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

  Please help quickly, this prevents me from working and even other things now.

  Thank you

  Hello

  Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

  But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Satellite A40 - attention: problem with the cooling system has been detected.

  Hello guys,.

  From time to time, I get the following message is displayed:

  WARNING: a problem with the cooling system has been detected Toshiba
  Please turn off computer immediately and return it for service.

  I have Windows XP on it.
  I opened the cooling fan and clean it. Of course, I found it dirty rally.
  But still, I get this message!
  What should I do?
  I live in Northern Germany.

  Any advice is welcome and thanks in advance.

  Ibrahim

  Hello

  The message says it all!
  In this case you should contact the service provider authorized in your country!

  > I opened the cooling fan and clean it. Of course, I found it dirty rally.
  Eventually, the cooling modules don t like needs and that is why the message again!

  Nothing to my friend... you need help laptop technician