An excerpt from the sqroo-up memory

Similar Questions

• Inspiron 5150 - cannot get dvd player to be removed from the Bay of memory.

  I need to replace the power jack on my laptop. To get to the power supply, I need to remove virtually all of the computer.

  I removed and replaced the dvd drive in the past on mine.  However, I had dell replace my motherboard disk about 9 months, just before my warranty expires.

  I now can't seem to get the dvd drive lever to work (from the Bay of memory).

  I don't want to force the lever, but nothing happens when I move the lever.  It doesn't seem to be catching anything to release the dvd player.

  Is there another way to get the dvd drive.  I try to avoid the shipping of my unit for repair.

  Thanks in advance

  
  

• excerpt from the previous version of create

  Hello!

  Is there a way to create and save a snippet of the block diagram for an earlier version? I realized that even if I save my VI for the previous version and open, the excerpt from png created by this version sooner is always LV 2014 version.

  Is it possible somehow?

  Thanks for the info!

  It should not conflict with those, but there was a bug in VIPM which caused the CTC to enter in conflict with itself in certain circumstances. You can read about it in the CTC support thread starting here. According to the changelog, the latest on the LAVA (3.2.3) should solve this. If you got all of the network tools, it's probably not the updated, so you should get the lava. If this isn't the case, I've also posted a temporary for the support wire, in order to get that one.

• Cannot create an excerpt from the DVD - unspecified error. What can I do?

  Trying to create a DVD from windows DVD creation.  When I try to listen to excerpts, video the error screen appears: unspecified error.  What should I do?

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of Windows is installed on your computer?

  Reference: http://windows.microsoft.com/en-US/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Try to change Windows DVD Maker DVD-Video settings and check.
  Reference: http://windows.microsoft.com/en-US/windows7/Change-Windows-DVD-Maker-DVD-Video-settings

  Method 2:

  Check if the audio and video filters are causing this issue.
  Reference: http://windows.microsoft.com/en-US/windows7/Video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Also, please take a look at the article.
  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 3:

  Clean boot your computer performance.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as Normal mentioned in step 7 in the above article.

  Method 4:

  Try to perform a SFC scan on your computer and check to see if that fixes the problem on your computer.

  Click on the link below and follow the instructions in the article.

  http://support.Microsoft.com/kb/929833

  Use / scannow command from the command prompt.

  Note:

  ·         You must be logged on as administrator to run sfc.

  ·         /scannow: Scans all protected system files immediately.

  ·         If sfc detects that a protected file has been replaced, it retrieves the correct version of the file from the %systemroot%\system32\dllcache folder, and then replaces the incorrect file.

  If the %systemroot%\system32\dllcache folder is corrupt or unusable, use sfc/scannowto repair the contents of the Dllcache directory.

  Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• I burned a DVD of my camcorder via the pc. I tile not the video and now am not able to remove it from the pc's memory since I'm not. My memory is all sold out.

  I burned a DVD of my camcorder via the PC.  I have not the job title and the I am currently not able to find the data in order to remove it from the computer - memory is all sold out.

  Hello Netzoo,

  Welcome to the Microsoft Answers Community!

  First place to check would be the place that the program saves by default. You can test it by importing a video (maybe a few seconds of blank film), then click on the registration option. That first record appears in the Save dialog box is where the program normally / last saved a file. Each program is different, but generally unless the project is recorded information is stored in a .tmp (temporary) format and then cleaned when the program stops. You can clean any .tmp among other files using Disk Cleanup:

  ·         Click Start

  ·         Click on all programs

  ·         Click on Accessories

  ·         Click Disk Cleanup

  ·         Check the boxes for the files you want to clean

  ·         Click OK

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Messages from the C drive memory

  I started having a message not enough memory for the C drive a few days ago.

  I have a gateway with Windows Vista Home Premium laptop.

  Windows is updated automatically, and I sometimes have to update it manually.

  I use Microsoft Security Essentials to protect my computer and continue to say that my computer is protected, and that no threats were detected. I run a Quick Scan daily and a full Scan weekly. It is updated daily.

  I use disk cleanup and Disk Defragmenter at least once a week.

  The last thing I installed was a software program, that I bought there is almost 4 months, to help clean and compact the registry of my computer, in order to help speed up the performance of my computer.

  During the process of cleaning, compaction and laundering of deleted files, is most needed, in the last months, I had been seeing about the same amount of memory available for the past few months for drive C (86.6 GB) and recovery drive D (3.14 GB).

  Then, in just a matter of 2 or 3 days, I started to receive messages from memory to the C drive.

  Available memory on the C drive went from 86.6 GB to 454 MB unexpectedly in just a few days.

  I ran the Diagnostic Microsoft memory tool, which indicated that there is no memory error.

  Hoping that I might be able to free up some space on the C drive, I deleted most of the entries on my list of favorites.

  I've been watching all the programs installed on my computer, but I don't think that any of them are not needed. And none of them use more than a few MB of space.

  I am still reviewing each of the articles or short videos, which I had downloaded over a year ago to assist me in my studies, to see if I might be able to get by without that none of them, hoping that remove anything could improve the available memory on the C drive.

  Microsoft mentions the warning signs of a low disk space, whereas we could take steps to avoid any data loss.

  Anyone have any suggestions for other diagnoses I could try running?

  In the meantime, I will continue to read the information on the use of my computer Gateway and Windows Vista Home Premium, as well as try to read articles on the Microsoft Web site.

  I would like suggestions of any person, who suffered a similar, unexpected and unexplained loss of memory on disk C and how you could improve your memory.

  Hello

  The last thing you need is a registry cleaner.

  They can no longer hard for your operating system as any good claimed in their sales pitch.

  You should never touch your registry unless you know what you do and then do it manually yourself.

  These automated programs from the registry will destroy your system.

  "The available memory on the C drive reached 86.6 454 MB Go unexpectedly in a few days".

  This free program lets see what occupies space in C:

  http://www.Jam-software.com/treesize_free/

  And to ensure that there is no Malware, run this program;

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• How to transfer photos from the disc on memory stick

  I want to transfer wedding pictures from a dvd to a memory stick

  Connect the memory stick (I assume you mean a flash player), and Windows will assign a drive letter to it so that it looks like a small hard drive.  Then use copy and paste from the DVD in the flash player.

  Good luck.

• an excerpt from the new messages

  When new email arrives in Apple mail, I get a box of fine print in the top right of my screen. Quite often, it covers an area of research that tend to be in the same place. Rather than fiddling with, can I have the preview appear elsewhere?

  Thanks for the tips.

  You cannot change the position of the alert, but if it does not disappear after a few seconds, open the Notifications pane in System Preferences, select mail from the list on the left and change the style alert from the alerts to the banners. You can also turn off notifications, if desired.

• How can I block "excerpts" from the homepage of firefox

  Home page of Firefox with big Firefox logo, search box and logos link at the bottom.

  If you prefer not to see excerpts on the topic: home page or if there are problems with a snippet of code, you can set this pref to a value of empty string on the topic: config page by removing the current value through the context menu (change) or a double click.

  • topic: config page: browser.aboutHomeSnippets.updateUrl (current value to delete)

  Delete the storage\persistent\moz-safe-about + House in the closed Firefox with Firefox profile folder (Firefox '3-bar' menu button > exit/Quit) remove code snippets stored in IndexedDB and make Firefox to use a default extract value.

  You can reset the pref browser.aboutHomeSnippets.updateUrl through the context menu on the default to reactivate the code snippets and make Firefox recreate the moz-trunk-fort-about + folder.

  Close and restart Firefox after changing the value of the preference of browser.aboutHomeSnippets.updateUrl.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• An excerpt from the clips do not play after upgrade

  None of my clips seen in the library play when I tap on space or select the game from the menu.  Please help solve this problem.

  Thank you

  PS, I've already trashed preference and it is not yet one of my clips play in the event browser.

• Excerpt from the IP address of the JIT

  Hello.

  I'm new in the world of Cisco

  There is a task where I need to extract the ip address of the output from the cli interface.

  I am trying to achieve through EEM.

  The script works when I entered the 'sh ip int brief command.

  However, when I replace this command "ping routerA.com".

  and run the applet, there is no output.

  The script is shown below:

  Event Manager applet showIP

  event no yes synchronization

  command action 1.0 cli 'enable '.

  Action 1.5 cli command "ping routerA.com".

  Action 2.0 regexp '[0-9.] '. + "$_cli_result result.

  Action 3.0 puts "$result".

  Can someone help me?

  Try this:

  event manager applet getIP
  event none sync yes
  action 1.0 cli command "enable"
  action 1.5 cli command "ping 10.1.1.1"
  action 2.0 regexp "to ([0-9\.]+)" $_cli_result match ip
  action 3.0 puts "$ip"
  

• Excerpt from the photos does not not for thumbnails in the Windows Explorer Windows 7. How can I fix?

  When you navigate to the folder my images via the Windows Explorer in general image preview would be in thumbnail mode. Now when I click on a folder that contains the image previews files all deposit 1 second after you open the file and be replaced by the standard Windows icon.

  I want to know how to fix this. I was not able to view previews via Windows Explorer since the discovery of this question, even if I chose all miniature views.
  I appreciate your help.

  No guarantee... but already posted the info
  by: Shekhar S - Microsoft technical support.   maybe worth a try.

  =====

  Q:
  Cannot view thumbnails

  A:
  Before you start make sure that you are logged on as administrator.
  Then proceed as follows:
  a. first of all, to disable the creation of thumbnail by opening Windows Explorer, by clicking on
  hold the button and selection of folder and Search Options.
  Click the view tab and check always show icons, never thumbnails. Click
  the OK button.

  b. then, run the disk cleanup on the C: drive and empty the cache so that you can retrieve
  disk space. You can find it in accessories | System Tools. Place one
  check the following thumbnails and click OK.
  Click on delete files in the confirmation window. Disk Cleanup will now be
  clear the cache of thumbnails and close.
  Note: This will delete the database of thumbnails and after reboot ing the
  computer it will automatically create.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  (c) in Windows Explorer, navigate to the AppData\Local\Microsoft\Windows
  file under your name.
  If you can't find it, simply copy the following text:
  %LocalAppData%\Microsoft\Windows
  Paste it into the address bar and press ENTER.
  d. right-click on the file in Solution Explorer and select Properties.
  e. Select the Security tab.
  f. click on the Advanced button.
  g. in the permissions tab, click Edit.
  h. check to include the permissions that can be inherited from the parent of this object.
  i. click on the OK button on the permissions tab.
  j. click the Yes button in the Windows security box that opens.
  k. close all open mailboxes.
  l. return to the folder and Search Options and uncheck the show always
  icons, never the photos and you're done.
  Mr., restart the computer.

  =====

• Excerpts from the import in the libraries of CC

  Is it possible to import existing code snippets, photos etc from the finder directly to CC libraries.

  As we use a large number of extracts for different projects (using the minijonction so far), it is not really an option to import each simple code snippet in Indesign and save it from there.

  Grateful for any suggestion

  My understanding is that mini-Bridge was based on the now deprecated Flash technology, is probably not return this form, even with the public reaction.

  Now that it is gone, we have to understand the new workflows... and maybe you need to add an adult beverage for that coffee that I suggested earlier.

• excerpt from the LOB values

  Hi all
  
  I activated the audit on 2 tables of the database and got the below outputs (in view). Please note that the data type of column are LOB
  

  INSERT INTO PO_CONTROL_RULES(RULE_TYPE_CODE,AMOUNT_LIMIT,INACTIVE_DATE,OBJECT_CODE,CONTROL_RULE_ID,LAST_UPDATE_DATE,LAST_UPDATED_BY,LAST_UPDATE_LOGIN,CREATION_DATE,CREATED_BY,PROGRAM_UPDATE_DATE,REQUEST_ID,PROGRAM_APPLICATION_ID,PROGRAM_ID,LOCATION_ID,SEGMENT14_HIGH,SEGMENT12_LOW,SEGMENT12_HIGH,SEGMENT1_LOW,SEGMENT13_LOW,SEGMENT1_HIGH,SEGMENT13_HIGH,SEGMENT2_LOW,SEGMENT14_LOW,SEGMENT2_HIGH,SEGMENT3_LOW,SEGMENT15_LOW,SEGMENT3_HIGH,SEGMENT15_HIGH,SEGMENT4_LOW,SEGMENT16_LOW,SEGMENT4_HIGH,SEGMENT16_HIGH,SEGMENT5_LOW,SEGMENT17_LOW,SEGMENT5_HIGH,SEGMENT17_HIGH,SEGMENT6_LOW,SEGMENT18_LOW,SEGMENT6_HIGH,SEGMENT18_HIGH,SEGMENT7_LOW,SEGMENT19_LOW,SEGMENT7_HIGH,SEGMENT19_HIGH,SEGMENT8_LOW,SEGMENT20_LOW,SEGMENT8_HIGH,SEGMENT20_HIGH,SEGMENT9_LOW,SEGMENT21_LOW,SEGMENT9_HIGH,SEGMENT10_LOW,SEGMENT21_HIGH,SEGMENT10_HIGH,SEGMENT22_LOW,SEGMENT11_LOW,SEGMENT22_HIGH,SEGMENT11_HIGH,SEGMENT23_LOW,SEGMENT23_HIGH,SEGMENT24_LOW,SEGMENT24_HIGH,SEGMENT25_LOW,SEGMENT25_HIGH,SEGMENT26_LOW,SEGMENT26_HIGH,SEGMENT27_LOW,SEGMENT27_HIGH,SEGMENT28_LOW,SEGMENT28_HIGH,SEGMENT29_LOW,SEGMENT29_HIGH,SEGMENT30_LOW,SEGMENT30_HIGH,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,ATTRIBUTE_CATEGORY,CONTROL_GROUP_ID) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9,:10,:11,:12,:13,:14,:15,:16,:17,:18,:19,:20,:21,:22,:23,:24,:25,:26,:27,:28,:29,:30,:31,:32,:33,:34,:35,:36,:37,:38,:39,:40,:41,:42,:43,:44,:45,:46,:47,:48,:49,:50,:51,:52,:53,:54,:55,:56,:57,:58,:59,:60,:61,:62,:63,:64,:65,:66,:67,:68,:69,:70,:71,:72,:73,:74,:75,:76,:77,:78,:79,:80,:81,:82,:83,:84,:85,:86,:87,:88,:89,:90,:91,:92)  ;
  
  
  
  
   #1(7):INCLUDE #2(5):99999 #3(0):  #4(14):DOCUMENT_TOTAL #5(5):12001 #6(19):11/14/2012 12:48:47 #7(4):1160 #8(7):2373388 #9(19):11/14/2012 12:48:47 #10(4):1160 #11(0):  #12(0):  #13(0):  #14(0):  #15(0):  #16(0):  #17(0):  #18(0):  #19(0):  #20(0):  #21(0):  #22(0):  #23(0):  #24(0):  #25(0):  #26(0):  #27(0):  #28(0):  #29(0):  #30(0):  #31(0):  #32(0):  #33(0):  #34(0):  #35(0):  #36(0):  #37(0):  #38(0):  #39(0):  #40(0):  #41(0):  #42(0):  #43(0):  #44(0):  #45(0):  #46(0):  #47(0):  #48(0):  #49(0):  #50(0):  #51(0):  #52(0):  #53(0):  #54(0):  #55(0):  #56(0):  #57(0):  #58(0):  #59(0):  #60(0):  #61(0):  #62(0):  #63(0):  #64(0):  #65(0):  #66(0):  #67(0):  #68(0):  #69(0):  #70(0):  #71(0):  #72(0):  #73(0):  #74(0):  #75(0):  #76(0):  #77(0):  #78(0):  #79(0):  #80(0):  #81(0):  #82(0):  #83(0):  #84(0):  #85(0):  #86(0):  #87(0):  #88(0):  #89(0):  #90(0):  #91(0):  #92(3):201

  The first is the used insert command and then the values passed above the insert command. Now, I need to extract only the column AMOUNT_LIMIT
  LAST_UPDATE_LOGIN LAST_UPDATED_BY, LAST_UPDATE_DATE, column and its corresponding values from the view...
  
  Any idea?
  
  Kai

  Try as...

  Select regexp_substr (substr (name, instr (name,'#2(5):', 1, 1) + 7),'[0-9] *') in soln_log

• Excerpt from the hours between two dates

  Hello

  This is the value stored in the table of my database.

  I want to extract betwwen hours two dates. How can I extract it.

  I try to run like this

  Select to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM') double, but it gives the answer as the format 21:10:00.000000000 + 000000365

  I want simple hours, minutes, and seconds

  What is the format of this value as "dd-MON-yy."

  27 JANUARY 14 01.30.00.000000 PM

  26 JANUARY 14 06.22.32.170033 PM

  Use the Extract function. Like this.

  () AS T1 (C1)

  Select to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM') of double)

  SELECT EXTRACT (DAY OF C1) | ' DAYS '.

  EXTRACT (HOUR OF C1) | ' HOURS '.

  EXTRACT (MINUTE OF C1) | ' MINUTES '.

  EXTRACT (SECOND C1) | ' SECONDS

  FROM T1;

  OUTPUT:

  365 DAYS 21 HOURS 10 MINUTES 0 SECONDS

  If not try it.

  SELECT EXTRACT (DAY OF to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM')) | ' DAYS '.

  EXTRACT (HOUR FROM to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM')) | ' HOURS '.

  EXTRACT (to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM') MINUTE) | ' MINUTES '.

  EXCERPT ((SECOND from to_timestamp('27-JAN-14 05.30.00.000000 PM')-to_timestamp('26-JAN-13 08.20.00.000000 PM')) |) ' SECONDS

  DOUBLE;

  Post edited by: Parth272025