An excerpt from the clips do not play after upgrade

Similar Questions

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• Old videos downloaded from the phone will not play sounds

  original title: video phone

  video files recently downloaded from the my phone will play with his still earlier, who do not play with the sound, now are not... Troubleshooting said there is no problems, map its reports etc works well... someone has any ideas please?

  Hello

  1 did you change on your computer prior to this issues?
  2. What is the exact error message and the error code?
  3. what version of the Windows operating system is installed on your computer?
  4. what type of file format you are trying to play?
  5 are you facing this problem with specific videos?
  6. what application you're using to play the video?

  Try the following and see if it helps.

  
  Method 1:
  
  Step 1:

  If you use Windows media player to play videos, then I recommend you to install the appropriate Codecs and check if that helps.

  
  Codecs: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Codecs-frequently-asked-questions

  Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

  Step 2:

  If you use any non-Microsoft player to play videos, then I suggest that get you in touch with the program to build support.

  Method 2:

  Set the audio output device by default using steps below and check if it helps.

  a. click the Start button and then click Control Panel. In the search box, type sound, and then click sound.
  b. click playback devices.
  c. Select the device by default and set as default to make sound come from specific device.
  For more information, see the following Microsoft article.
  http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

  Method 3:

  No sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  See also:

  Tips for solving common audio problems: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

• I'm doing a DVD on Windows Movie Maker, but some of the clips do not play during the slide show there at - it a way to solve this problem? __

  I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.

  I'm trying to make a DVD on Windows Movie Maker, but some of the clips won't play during the slide show, is there a way to solve this problem? I tried the reset, I tried to put videos a few times more, but whenever I play, a clip works very well, because it progresses and plays for the next clip, it appears white, but if I play the clip in an individual file, it works fine. Help, please.

  =======================================
  Just some thoughts...

  It may be useful if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

  Also... it might be a compatibility problem with your source files...
  (videos / photos / music files)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Also... If it is a large complex project, you could have a system
  the question of resources. The answer would be to create
  more modest projects.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Excerpt from the photos does not not for thumbnails in the Windows Explorer Windows 7. How can I fix?

  When you navigate to the folder my images via the Windows Explorer in general image preview would be in thumbnail mode. Now when I click on a folder that contains the image previews files all deposit 1 second after you open the file and be replaced by the standard Windows icon.

  I want to know how to fix this. I was not able to view previews via Windows Explorer since the discovery of this question, even if I chose all miniature views.
  I appreciate your help.

  No guarantee... but already posted the info
  by: Shekhar S - Microsoft technical support.   maybe worth a try.

  =====

  Q:
  Cannot view thumbnails

  A:
  Before you start make sure that you are logged on as administrator.
  Then proceed as follows:
  a. first of all, to disable the creation of thumbnail by opening Windows Explorer, by clicking on
  hold the button and selection of folder and Search Options.
  Click the view tab and check always show icons, never thumbnails. Click
  the OK button.

  b. then, run the disk cleanup on the C: drive and empty the cache so that you can retrieve
  disk space. You can find it in accessories | System Tools. Place one
  check the following thumbnails and click OK.
  Click on delete files in the confirmation window. Disk Cleanup will now be
  clear the cache of thumbnails and close.
  Note: This will delete the database of thumbnails and after reboot ing the
  computer it will automatically create.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  (c) in Windows Explorer, navigate to the AppData\Local\Microsoft\Windows
  file under your name.
  If you can't find it, simply copy the following text:
  %LocalAppData%\Microsoft\Windows
  Paste it into the address bar and press ENTER.
  d. right-click on the file in Solution Explorer and select Properties.
  e. Select the Security tab.
  f. click on the Advanced button.
  g. in the permissions tab, click Edit.
  h. check to include the permissions that can be inherited from the parent of this object.
  i. click on the OK button on the permissions tab.
  j. click the Yes button in the Windows security box that opens.
  k. close all open mailboxes.
  l. return to the folder and Search Options and uncheck the show always
  icons, never the photos and you're done.
  Mr., restart the computer.

  =====

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• Audio clips mp4 not recognized after upgrade to CC 2015.1

  Just upgraded to CC 2015.1 on a Windows 7 Pro workstation. A former CC 2015 project file opened yesterday, received an error message about missing a missing MultibandCompressorCore.dll, saved as CC 2015_1, did a few editig, seems ok, and smooth. But today many clips are offline, when I repeat the tracks audio and audio clips are not recognized (screenshot). When I simply import the clips of same, there is also no audio what either is. When I check under change clip audio channels are grayed out. When I play the clips via Quicktime or Windows Media Player all sounds is there. I'm lost in the darkness, silence, please help.

  

  

  Exact same file on another workstation (with the same characteristics). One with and one without sound? Import the same video in After Effects and Audion works like a charm, the fable is there. What I'm missing here? A first adjustment?

  

  I had the same problem. What I've done. 1 / I chose all mp4 files in Windows Explorer. 2 / I created a new folder very close to the original (s) 3 / I moved the clips (without the cfa and so on...) for the new records. 4 / premiere Pro will be automatically "relocate" the missing clips when you reopen the project. And now, they have audio too. I hope this will help.

  Best regards

• Presario CQ58-241SA: video does not play after upgrade to win 10

  Upgraded to Windows 10, but now the videos won't play - even videos of 'getting started '.

  Graphics card is "AMD Radeon HD 7310"

  Tried to update the video through settings, but don't not solved

  Any suggestions? (Simple answers, please, I'm not very profficient)

  @rosenpete100,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Satellite C50D-B-120 - buttons on the touchpad does not work after upgrade to win 10

  I just bought this new laptop. I have updated to Windows 8 Windows 10. Everything worked fine before the update. I am now active on Windows 10 and the mouse pad does not work. Initially, the entire mouse pad not working, I couldn't even move the mouse on the screen. I had a play around in the settings and have managed to get the work of the mouse, but now the button of mosuepad. I searched around the computer for the settings to solve this problem, but I had no luck.

  Please any help would be great, begin teaching and could do with getting this issue sorted.

  Thank you!

  You need to uninstall the driver for the touchpad (MOMENTUM or Synaptics)
  After that, restart the laptop...

  You can also try to update the driver in Device Manager... but the unit must be connected to the internet...

• Keyboard and the mouse do not work after upgrade to Windows 7.

  The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

  MS Security Essentials:
  Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

  Windows 7:
  Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

  Update for Windows 7 for x 64-based systems (KB3004394) - recommended
  Update for Windows 7 for x 64-based systems (KB3020338) - recommended
  Update for Windows 7 for x 64-based systems (KB3021917) - recommended

  X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

  The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

  For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

  (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

  (2) went in mode Bios and the keyboard works until I leave.

  (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

  (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

  (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

  6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
  but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

  (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

  I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

  So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

  Now I'm wondering if anyone knows why these problems are happening or fix them for good?

  Hi Floyd,

  I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

  Just a few questions in order to get a clear picture of the issue.

  1. make all the windows updates installed successfully?

  2. What is the full error message you see in Device Manager?

  Follow the thread and check them off below if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

  I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

  Get back to us if the problem persists.

• Time space capsule from the OLD account not released after deleting account...

  Help!  I had an old installation 'account' on the Time Capsule for tim machine backups.  The account has been using more than 2.5 TB of the available 3 TB and causing all backups to fail without space.  The machine which was supported until the account had a HDD 500 GB while it was difficult to understand how he was taking so much room so fast.  I finally understood that the .inprogress file has not been cleaned and had leftovers backups.   I tried everything to remove/reset it but nothing worked so I finally just deleted the account on the Time Capsule via airport Util expecting that all space used by that account would be released - but no, it wasn't.  Now all space is exhausted and I can't seem to find a way to connect to the root drive or to somehow be cleaned and released!

  How to solve this without losing the backups of the other accounts that share this time Capsule for their respective Time Machine backups?

  Do you mean that the hard drive Time Capsule... called 'Data', unless you changed the default name... are not accessible using the Finder... or... the Finder / order... or, you aren't sure how to access the Time Capsule disk?

  Are still using OS X (10.7.4) on your Mac, as you indicate in your profile?  If this is not the case, what operating system is currently installed?

• "show my windows and tabs from last time ' does not work after upgrade to 8.01

  After I've upgraded to the latest v8.01 I lost all my tabs sites and even trying to add them and save them with the tools > Options > general > start > when Firefox starts selected have to "show my windows and tabs from last time" she does not hold registered sites and browser restarts it always loses all tabs and shows only a tab with Firefox home Web page. I need to open several sites to work and the only way to do it now is to make sure, I click on the current use in "pages" under General Option of the tools. It's getting very boring because I keep changing my tabs to different sites in a meeting and I am used to simply close the browser, based on making them all back in when you restart Firefox.

  Have you tried to delete the file or move it to another location?

  There should also be a file sessionstore.bak that contains the previous session, i.e. the sessionstore.js file found at the beginning of the current session and is used to restore the previous session via ' history > restore previous Session '.

  Also, make sure that Firefox is closed correctly and that there is not any suspended the process Firefox

• Runes of Magic will not play after upgrade to Windows 7 64-bit

  Have upgraded to window7 64 bit that I use now the 8 GB of ram

  Runes of Magic was playing on my old windows version but usually install a new

  Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

  Game Launcher now returns but crashes after I selected the game

  Any help would be greatly appreciated

  Thank you

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the full error message or error code?

  I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: Runes of Magic is compatible with Windows 7 64 bit

  Reference:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

  Note: If you still have the problem then I suggest you to contact the game manufacturer.

• The contents of the folder are not displayed after upgrade

  When you click to open more folders of bookmarks toolbar to not display all bookmarks. Instead, they display a small square under the left side of the folder name. On one that opens subfolders under him displayed the same square. Its as if they tried to open but could not draw the menu. Bookmarks are available and display pages if I choose to open in a tab when right-clicking, but they cannot be seen otherwise. I have the following extensions that are not currently enabled: Adblock Plus, Adblock more pop - up, download status bar, download helper, Leet Key, IP Norton, Norton Toolbar, password exporter, personas. All have been updated to the latest version. I have Image zoom which is activated. IO have several additional plugins that are not enabled. Please let me know if they are needed.

  Do you use a character (Tools > Modules > themes)?

  See also http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

• Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU

  I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beeps. After you have installed the Celeron back everything works fine. i5 CPU is brand new. What can be?

  In my previous post, I explained the reason it has not worked, and listed the CPU that will work.

  HP tests CPU in the laboratory and publishes a list of processors that will work in a notebook.

  Notebook motherboard BIOS has a list of processors that will work. If it is installed, which is not encoded as OK in the BIOS ROM file, then this will not work.

  Processors published (in the maintenance guide & Service for your nttebook series model) are available in models that can be deilvered in State CTO (configured to order).