analysis of the table and compare

Similar Questions

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• Iterator for the table and form is a problem during the cleaning of the records

  Hello

  I use JDev 12.1.2.

  I have an object of the detail view. I represent a part of its fields in a table and the rest in a form. I use the same iterator. Basically, I dragged and dropped the object even from the view of the data control and created a table and form layout with the fields I wanted in each provision. I put in place a clear feature for the rows in the table with a clear"" key. -on click I delete the line of the iterator in the managed bean. When I do this the selected record is deleted and the next record is displayed. But fields entered in the form layout also gets deleted. (the form should also be showing the record currently selected - it shows but entrable fields in the form are deleted because of claire that I did on the previous line.) If anyone can help get this resolved?

  Not use the same iterator for the tables and forms here? The links are in the row (row.bindings...) for the table, but for the form it is (links...). The Delete on the current row operation is causing the iterator delete all fields of links instead of from the line? Please shed some light.

  Thank you

  UMA

  How do you rank on the iterator compensation?

  use resetActionListener in your clear button and let us know what is happening?

  Ashish

• Is it possible to place the table and the text online?

  Hi all

  I have a table need to align with the numbered list. Is it possible in line of the table and text on a single line. EX: 6.12 and top of the 'text' must align horizontally.

  See the screenshot of the problem.

  Currently what I do, it is to place the table in separate frame and place it online using the option of the anchor.

  

  Thanks in advance.

  Kasi

  We could use the options for text blocks to position the first line.
  Fixed value set to 0.

  And a table style that would govern the distance before and after a table.
  If you wish, set both values to 0 .

  We could also do a minimum in the lead with the paragraph formatting to separate paragraph following with the next table.

  

  

  

  Best,
  Uwe

• I have the table and its size is full

  I have the table and its size is full when im inseting records, not insert, how do I increase the size of table

  ALTER TABLESPACE ts_tbsp
    ADD datafile 'c:\oracle\product\10.2.0\oradata\df\ts_data01.dbf'
    SIZE 4M
    AUTOEXTEND ON;
  

  Means-
  In tablespace "ts_tbsp", adding a data file 'ts_data01 '.

  AUTOEXTEND ensures in the future if whenever the data file fills an additional size of 4 M is added automatically.

  Once it is created, a new data with the extension .dbf file is created in the folder Oradata.
  Another file dbf (default) includes:-SYSTEM.dbf, SYSAUX.dbf, TEMP.dbf, USERS.dbf, etc.

  See - http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_3002.htm

  HTH.
  Vanessa B.

• Flexible, set up including the tables and columns of text?

  I need to set up tables (annual report) and some text between the two notes.

  I would like to have frames as little as possible on every page - for InCopy workflow later.

  If I paste the text of the regular column in the frames containing the tables anchored that I must apply the shift of different basis for each block of anchor text, text which is not a nice workflow.

  Can you recommend a skillful means and flexible to set this place that will make the tables and text boxes flows if more lines or more text are added?

  Best regards

  Nina storm

  For this test I did it manually, but I have no reason to think that it would behave differently as part of a style. As far as I know, ID will attempt to balance the two columns automatically. If there is not enough text to divide into two columns it will not appear to divide but always see you any extra spacing and add just enough text to be wider than the column width of Courland and your line will have a gap in it for the gutter of the column.

  OK, I've just defined a style with the attribute of split, and Yes, it works in the same way. If you have a single paragraph, the paragraph is divided. If you have more than one, the block is divided, reading down by the first paragraph to the second (assuming that the linecounts work that way) in the first column before splitting into the second column. Paragraphs distributed individually. ID is to balance my columns automatically and will adjust the break if I edit, and if the number of rows is not divisible by 2 short column is on the right.

• After the reopening of the dreamweaver files, the table and its contents do not appear in design mode

  I had a problem with the deisgn opinion that caught me all week. I designed a Web page with dreamweaver CS4. After having reopened this Web page, I got the problem to see the tables and images inserted in dreamweaver (the images cut into slices of Fireworks works well). Somehow this problem existed only in design, but is NOT seen on browser / see live.  I thought that it is the problem of adjustment, but I tried to reopen the Web page I designed earlier... you have no problem in design or mode live view. I also tried to start another file, same problem existed (tables/images do not display in design) I'm really confused. Any thoughts?

  I've already done my research in the world, but cannot find solution.

  You closed the first cell in what appears to be your content area.

  />

  Must be:

  Write it down / at the end of the is removed from the version "should be." Enjoy. _T

• Bigger disk-swapping, but down two, possible to remove them from the table, and then expand?

  I have a R710 with a PERC 6 / i, Win 2008 R2 running. I have a small disk for the operating system, the other 5 bays are filled with 1 TB disks in a RAID array-5.

  I need to add more storage, so I want to buy three discs of 3 TB. I plan on the withdrawal of old readers, and then put it in the new, bigger. I assume that it will take 1 of the 3 TB and repair. Leaving free 2 TB disk. Repeat this step twice more, which will result in three discs of 3TO with 6 TB of disk space not used in the RAID.

  Is it possible to have the controller expand storage in my table of RAID-5 existing free space, and then delete the two remaining 1 TB disks in the array?

  Who is? Is it still possible? Or do I have to backup the data on another storage device and delete the table and simply start a new one with the three discs of 3 TB and copy the data back?

  This will not work:

  (1) the PERC 6 won't take 3 TB drives; the maximum size is 2 TB.

  (2) you cannot delete records in a table - your RAID 5 5x1TB must always have records of 5 or more (you can add without deleting).  Even when using the same number of disks, isn't it possible to do the smaller table/VD.

  (3) even if you used 2 TB disks, there is no way to expand the RAID 5 using the extra space on the disks - with 5 disks in RAID 5, it will remain the same size. The only thing you can do with the new space is to create a second RAID array on the disks (called "slice").  This new VD is handled by the operating system as another "drive."

  Keep in mind if backup and restore in a larger painting, as if the VD ('disc') is greater than 2 TB, the disc "" MUST be converted to GPT and active UEFI bootmode (instead of BIOS).  Make sure that your backup software is capable of restoring one using the BIOS install on a system UEFI (and the 'disc' TPG 'disc' MBR).

• generate the search pages the tables and forms using templates speed

  Hello
  
  I have a table-form page and would like to have a quick search on two windows. Currently, I'm copying the form of generated code page jspx table on page jspx form to achieve. Speed models can be modified to allow this? I looked at the formGroup.vm and the searchArea.vm, but the below lines
  
  If ($JHS.current.pageComponent.hasSearchArea)
  if(${JHS.) Current.Group.generateSearchAreaInRegion})
  
  seem to be stumble me...
  
  We develop in JDev 10.1.3.4 and JHeadstart 10.1.3.3.88
  
  Thank you!
  
  Lana

  Lana,

  You can make a custom searchArea.vm and a custom formGroup.vm model where you uncheck the box for #if ($JHS.current.pageComponent.hasSearchArea)

  You will then get a search box in the table and the page of the form.

  Steven Davelaar,
  Jheadstart team.

• How to see the lock on the table and query?

  Hi all
  How do we see the lock on the table and query?
  
  
  Thank you
  Rafi

  Yes Rafi,

  It works fine at my end... see below:

  Opening of Session 1 with scott/tiger and:
  setting a day emp set ename = 'xx' where empno = 7499;

  Opening of Session 2 with scott/tiger and:
  setting a day emp set ename = 'xx' where empno = 7499;
  > This session is locked by a superior.

  Open 3 Session with pw/sys as sysdba and:

  SQL> set serveroutput on
  SQL> BEGIN
    2  dbms_output.enable(1000000);
    3  for do_loop in (select session_id, a.object_id, xidsqn, oracle_username, b.owner owner,
    4  b.object_name object_name, b.object_type object_type
    5  FROM v$locked_object a, dba_objects b
    6  WHERE xidsqn != 0
    7  and b.object_id = a.object_id)
    8  loop
    9  dbms_output.put_line('.');
   10  dbms_output.put_line('Blocking Session : '||do_loop.session_id);
   11  dbms_output.put_line('Object (Owner/Name): '||do_loop.owner||'.'||do_loop.object_name);
   12  dbms_output.put_line('Object Type : '||do_loop.object_type);
   13  for next_loop in (select sid from v$lock
   14  where id2 = do_loop.xidsqn
   15  and sid != do_loop.session_id)
   16  LOOP
   17  dbms_output.put_line('Sessions being blocked : '||next_loop.sid);
   18  end loop;
   19  end loop;
   20  END;
   21  /
  .
  Blocking Session : 139
  Object (Owner/Name): SCOTT.EMP
  Object Type : TABLE
  Sessions being blocked : 134
  
  PL/SQL procedure successfully completed.
  

  HTH
  Girish Sharma

• Popup do not insert in the table and not refreshing called page...

  Greetings
  
  
  
  Environment: APEX 3.1.1.00.09 on AIX 5.3 with 10 gr 2
  
  
  
  I read a lot of threads about my question and I think I'm getting closer to the answer but in some sort have combined a too big number of suggestions and am tripping over my own code.
  
  
  
  Please look at my sample application on apex.oracle.com:
  
  
  
  Workspace: galway
  
  User: gwicke
  
  Password: gwicke
  
  
  
  Please start by Page3, select any agency and then click on "add a new contract."
  
  There are currently a label "BOLD" < facilities > < strong > 'Add new Builder' which is a link that should open a popup window. Type a name in the field, and then click 'Create Builder'. This should INSERT the row into the table builder, close the pop-up window, assign the new name of the generator to the item page calling "Name Builder" and fill the screen element.
  
  
  
  In current state, the application will open the pop-up, allow entry and close by clicking on the button "create Builder." However, the new constructor is NOT inserted into the table and the calling page element is not met.
  
  
  
  Looking at the Page elements and Session State, I can see the correct values assigned to the elements "Pn_BULDER_NAME" on the popup page (4) and the calling page (2), but the value does not appear on the screen.
  
  
  
  I read here where there really two parallel universes, not forgiveness, Articles of two versions of the screen, a State of Session and the other which is displayed in the browser and there are measures to be taken to be sure that is displayed is updated to state of Session I want in this case.
  
  
  
  I entered the Javascript code on Page4 - header to set the 'passBack2()' function and the code in the section "Option URL Redirect" to the button "Add Builder" if all goes well perform protocol ARP for the INSERT, assign items to page 2 and close the pop-up window. He gets not quite everything.
  
  
  
  Any helpp is greatly appreciated. Thanks to Dene for most of the suggestions I have followed by code.
  
  
  
  -gary

  Hi Gary,.

  I think that there is a very simple solution to this topic - is not this spot really last night.

  First, Yes, you could use a "button" to manage the call for the popup - make sure that the button is a type of URL 'button', which is actually an A tag with the appeal under target URL. Otherwise, you could take you existing a tag and use the same class for one of your buttons attribute because this should make it look like a button.

  More importantly, however, I think we could do as:

  1. on your call popup page 2, clear cache for page 4 (the popup page) - I already did in your application by updating the url

  2. on page popup, allow the user to enter their desired P4_BUILDER_NAME value (not sure if you want to do something to make it unique?)

  3 let the user click on create on the shortcut menu. He will submit the page, that will make your P4_BUILDER_RANK (pk) value and insert a new record in the table (you might consider the creation of a sequence and a trigger to handle the creation of new value PK?).

  4 - assuming that the P4_BUILDER_RANK then exist (it would not if there is a mistake somewhere), then conditionally display a region that had a piece of javascript submit page 2 and closes then itself - we don't need to move everything back to page 2 (see below)

  5. as the P4_BUILDER_NAME and the P4_BUILDER_RANK exist in the session, to which page 2 be reloaded, (A) the selection list should be updated with the new generator (still not sure why all my entries appeared downstairs instead of in alphabetical?) and (B) the P2_BUILDER_NAME and the P2_BUILDER_RANK can have Post calculation calculations together (NVL) ((: P4_BUILDER_NAME,: P2_BUILDER_NAME) and NVL (: P4_BUILDER_RANK,: P2_BUILDER_RANK) respectively)-l' effect is, if there are the values stored in the page P4 elements, we use them, otherwise, we use whatever values were in the elements of page P2

  6 - Finally, to stop (5) that happens in all the loading of page 2, you would need to clear the cache of page 4 in as many places as possible - for example, branches for a 2 page or buttons on page 2

  The reason why we cannot pass values back to page 2, it is one of the elements is a list of selection. The value we want to select will appear not on the selection list until the page has been sent. So, we can set the value and submit because the value is not there. We can introduce and define the value, because the javascript don't know when the page has been updated (or, at least, you need an independent mechanism to identify, which can get complicated).

  So, in other words, as long as we know that if the values are in the session, we can use Post calculation calculations to set our fields to these values. The only thing to keep in mind is that we must ensure that these session values only exist when in need - so we empty the cache. This principle should work for any type of terrain - but as you have no doubt seen, simple text fields can be updated by the popup directly as the field must accept any value that we give.

  My only recommendation would be to completely remove the MRU of the page process because they are not necessary (they simply confuse the issue) and you could make your fetch PK and record insert into a single process - just to keep things clean and tidy, you understand!

  When I finished last night with your app, I will leave so that javascript can create an option on the select list, and then set the value. But the method described above seems to be much simpler.

  Andy

• Construction in real time of the table and the data tracing

  Hello

  I have a project in which I am waiting for a message from the chain coming to my serial port that contains two parameters of a voltage sensor compared to the position

  I will then draw two parameters for a XY chart as they arrived at my port to build a chart that is continuously updated with all the points came to the COM port (all from the position of the reading pressure readings).

  I know that to draw the two parameters against each other that I must use the XY-graph and for this, I have to insert my data in the tables first and then give them to the chart.

  The problem is that the message of the series is not at fixed intervals (for example a message now comes, the other may be after 1 minute, then another after one half minute.. .and so on). and the chart should be updated with the points once they arrive (in addition to displaying the previous points too of course).

  I don't know where to start! can someone put me on a track for it?

  Note: I have no problem with the interpretation of the data series, at the end I will have two numeric values which I'll then draw against each other

  Thank you

  One thing that I had not noticed before on your VI is that you use the wrong function when generating data in your table.  You should use table to build.  No insertion in the table which is more intended for stuff that goes in the middle of a table.  And the way you use it, you insert in fact data at the beginning and not at the end.

  I don't know what you have tried and why you think that the circular buffer is not what you want to do.

  Take a look for a function called data queue Pt by Pt that effectively does what you want.

  I will attach a Subvi I used.   I changed it to something that I found.  I think I found somewhere in LabVIEW itself, or an example, maybe the forums, but I can't find the original source.  And I don't see in the comments of the VI. (If anyone knows, please comment.)

• Use the value of the sum and compare

  I have a table with data below

  T1

  ID, amount

  12,20

  13,10

  14.5

  create table T1 (ID number, amount);

  Insert into T1

  Select double 12.20;

  Union

  Select 13,10 double;

  Union

  Select double 14.5;

  I need the sum of the quantity and the value of the sum compares the values as flat > display then 10 0 otherwise amounted

  output

  ID, amount, derived

  12,20,20

  13,10,10

  14,5,5

  If my table has a

  T1

  12.0

  13.5

  It should be

  T1

  12,0,0

  13,5,0

  You can use the analytic function SUM

  select id, amount, case when sum(amount) over() > 10 then amount else 0 end derived from t1
  

• Need help on repeat lines of the table and the subform

  I hope someone can help me find a way to accomplish things with a subform of repeating table in a form I'm building.  I have attached the file here.

  https://workspaces.Acrobat.com/?d=2nUNZuTf2T4tsdSykMTlXw

  I have a table (AssessChart1Table) set up on pg 7 (analysis) and built in buttons (AddRowAssesChart1 and DeleteRowAssesChart1) so that the user can add or remove rows of additional data according to the needs.

  The problem is that the user enters also cross the line header (AssessChart1HeaderRow1) in this data table.  There are 10 available columns; However, they will have to add more data than that. Therefore, I made a button (AddMoreCourses) for the user to click on to add another instance of the subform table (AssessEvalChart1) and also to cancel adding the subform with this button (UndoAddMoreCourses).

  In addition, I setup that whatever data the user enters in the cell of this table cell (Prog-DeptObjChart1) are automatically transferred to another table (AssessChart2Table), cell (Prog-DeptObjChart2), which is located on the next page (AnalysisCont1).

  All above works very well except that whenever the user presses the button (AddMoreCourses) I don't want it to automatically fill cells of text field that are copied from (AssesChart1HeaderRow3) because I need the user to be able to enter different values rather than add more columns to fit their data.  In addition, I would like that the values of the cells in the left column to repeat well because these values will not change. Currently the values of the cells in the left column that wear down (AssessChart2Table) to get stripped on (AssessChart2Table) whenever I the user pushes button Add more courses or cancel add more courses.

  In summary, the tables would look like the attached screenshots:

  :

  Any help would be highly appreciated.  I'm not experienced with Livecycle Designer.  The form I built by reading the forums and the examples.

  Where you need it, I use Livecycle Designer v. 9.0.0.2.20120627.2.874785 on a Windows 7 Pro platform.

  Thank you!

  They will need to copy in a similar way as with the other lines. I would say on the exit event for the field of Prog-DeptObjChart1, add the code that copies the rawValue of him in the second table. Your code has something there now, but it does take into account that there will be multiple instances of the same line.

  Thus, in the constructor of your action, add another result to the condition of AddRowAssessChart1.click: Add a new instance of AssessChart2Row1.

  Then exit to Prog-DeptObjChart1 in the event, add this code.

  xfa.resolveNode ("AnalysisCont1.AssessEvalChart2.AssessChart2Table.AssessChart2Row1 [" + this. "]") parent.index +"]. Prog-DeptObjChart2") .rawValue = this.rawValue;

  Now when you exit the field you typed in, the text is copied in paragraph2.