Analyze and display a text string that has HTML tags on blackberry java screen

Similar Questions

• I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

  I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

  Thank you.

  Kelly

  Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

• Xcode opens with 'ICloudSetupView.strings' at startup after a full stop. Xcode is disabled as a startup item, but there is a new startup item called "ICloudSetupView.strings" that has a "sort" of "Strings File". Is this a virus or spyware?

  MacBook Pro	(15-inch, mid 2010)
  OPERATING SYSTEM	OS X El Capitan (Version 10.11.2)
  Processor	Intel Core i7 2.66 GHz
  Memory	8 GB 1067 MHz DDR3
  Startup disk	Macintosh HD
  Graphics	Intel HD Graphics 288 MB

  The past several times I completely stopped my MacBook Pro and booted back up Xcode is the first thing to open, and it opens a window, I've never seen before called 'ICloudSetupView.strings '.

  I went to check if Xcode is checked as a startup item (I usually put off because I do not often use XCode) and Xcode is not even on my list of items that opens automatically when I boot.

  HOWEVER, there is a new startup item called "ICloudSetupView.strings" that has a "sort" of "Strings File".

  I traced the file in its location and found several others with the timestamp date same creation and now I'm worried.

  The path to the file is:

  System/Library/PrivateFrameworks/FinderKit.Framework/versions/A/Resources/SK. LP roj/ICloudSetupView.strings

  
  

  The file has only the following 2 lines of code (technically 1 with overflow) that you can see in the image:

  bplist00 "_uHD " Driveo-7F-8GX.title_H4f-Te-Tzu.title\iCloud

  3 @

  
  

  A screenshot of the Xcode file that opens and my preferences of start programme is attached.

  I'm quite worried about it, especially because it IS NOT defined as part of open automatically but it is.

  I searched online and found no something like this.

  Anyone know what it is?

  Or what the code does?

  Is this a virus or spyware?

  

  It is not spyware. Simply remove it from your login items.

• Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is restless))

  Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated and it is not difficult to work with him because I like and what I should I do?))

  Serial number C02FD2CPDF8V

• Display the text string on the Capture window

  Hello
  

  To capture is used difference two camcorders. What I have is a display of text pasted on the capture window. I do daily catches and what is new. Don't know how the text string is found on the capture window. Capture saves the film along with the display of text. I need to remove this information in order to have a full, clean with only the material captured.

  Attached a picture showing the information that needs to be removed.

  I use Adobe Creative Suite CS6 with Premiere Pro CS6 on a HP with Windows 7 pro 64-bit z800.

  Thank you!

  

  

  Well.

  I played on several bands and this one has its own text. It is burned in. This is most unexpected.

  Other assets play very well, as expected.

  Thanks for the idea!

  Now, I know.

• How can I make the text box caption to display a text variable that is longer than the length?

  Hi all, I would like to do this: make a text caption to display a variable that contains a paragraph of text that the user has typed as soon as possible.

  I created the maximum length of the variable only 1000 and I am able to partially displayed variable in the text caption - only at the end of the first line of caption text.

  ICan someone tell me how to configure the text caption so that it can encapsulate texts? I can't find it in the properties panel.

  Thank you very much.

  No need to shout, even if I'm not native English, I understood your question very well, and this can be done with the enhanced TextArea widget as I mentioned. Here is a screenshot:

  

  Workflow:

  • Create a user variable, I scored it
  • Insert twice the widget with variable TextArea (Jim Leichliter, CaptivatePro), on the screen, these are the two rectangles on the bottom red and blue
  • Configure the first Widget to be associated with v_text and show this variable by inserting a default $$ v_text$ $
  • Configure the second Widget to display this variable by inserting returns a default $$ v_text$ $
  • You will need a button to refresh, so that the text appears in the second widget. Here I used the button, and then assigned to the action "Jump to slide" with the same number of slide so that the playback head rewound to the beginning of the slide
    
  • The text in the second widget shows; as you can see, it can be formatted as you wish.

  If you want to display the text in another slide, no need to make the action update, it automatically displays when you get to this slide.

  It is not a text caption that is displayed, but the widget. Is this a problem?

  Lilybiri

• Check invalid date and display error message for that forms 10 g or 12 c

  Hi all

  a text element text_fdate is of data type date mask and the format is dd/mm/rrrr

  In this text element that I want to display validation message "you have entered an incorrect date that does not exist.

  When the user enters an invalid date as 30/02/2016 which is not exists.

  What trigger I use and when.

  Florian wrote:

  Hey Hamid,

  GET_ITEM_PROPERTY ('ITEM_NAME', ITEM_IS_VALID);<--it is="" not="">

  Above will work only on the query mode.

  The code works, but the below error code you gave does not work in forms 12 c.

  1. IF ERROR_CODE = 50012 THEN
  2. MESSAGE ("Please enter the correct date.");
  3. MESSAGE ("Please enter the correct date.");
  4. END IF;

  The correct error code is 50004 12 c forms.

  Just change the ERROR_CODE of 50012 to 50004 and it will work.

  I'll check the error code in form 10g and will play with you again.

  I already checked and functional at 10g.

  Hamid

• radio button and display the text

  Hello
  I'm creating a page (index page and action) where the index page has a group of option buttons (4 of them). If one of the four radio button is selected then a text (article about 30 lines) is displayed in the action after a submitt button page or the next button. is this possible?
  
  
  
  If it is possible how and what is the code for it
  Thank you
  
  
  
  
  
  

  display paragraph come from?

  I don't know yet. It would be better if
  can I just save it on the same page where the option button is declared? then send it to the action page myactionpage.cfm

  This is the example so if one radio button (a combination of radio button, it appears in a page)
  What will be displayed for each combination there is a paragraph.

  for example, if a radio button bob and camping, then I'll show in the action (for ex) page "BOB had an exciting camping trip.
  "If bob and the rebound is selected then the message on myactionpage.cfm say in the text" bob bounce and home remained.

  is it possible.
  If so, how

  Here's my example:

  
  
  
  
  
  

  http://www.myactionpage.com/ "method ="POST">"
  

  
  
  Bob
  
  Ken
  
  Carol
  

• Firefox exceeds the page down when a bar at the top of some websites (ThinkProgress) opens and hides the text time that Firefox has already moved to the bottom.

  When I go to one of the new articles (not the home page) of http://thinkprogress.org/ , and then press the 'next page', a bar or window appears in the upper part, which obscures the part of the page. I think it's because the site does not place the bar until after I have scrolled down several rows on the initial page and then that Firefox has already calculated the number of lines to move down. The problem will not occur on the bottom of next page because the bar is already in place. I did not have the bar and want to make him stop appearing.

  -- I already have "block pop-up windows" activated and ThinkProgress is not one of the allowed exceptions.
  -- I am using Mac OSX 10.9.2 on a 3.06 GHz Intel Core 2 Duo
  

  Ahh... This is a header. Some web pages, when you move down, place it in
  the top of the screen. If you go up to the top of the page, it should
  Go away.

• can I retrieve a text message that has been deleted and have not been saved by I the cloud?

  my phone is a phone 9.1.2.

  My husband also has an i phone and it plugged my iphone into his laptop computer to recharge. an update has started and delete a message that i really recover. where not saved messages and I can't get it back. I contacted my transported mobile and they are unable to help him.

  ecros03 wrote:

  my phone is a phone 9.1.2.

  My husband also has an i phone and it plugged my iphone into his laptop computer to recharge. an update has started and delete a message that i really recover. where not saved messages and I can't get it back. I contacted my transported mobile and they are unable to help him.

  No there is no way to recover data, if it has not been saved.

• Transform a string that displays hex data in normal format, in a string that has the same data in hexadecimal format

  I have a string of arbitrary length - say, 1AB1C0 - normal format. I would like to have a function that takes this string in and generates the same accurate, but in hexadecimal characters. If the entry will read 1AB1C0 in the normal string format, and the output will read 1AB1C0 as a hexadecimal string.

  I'm doing this because I found that the terminal works better if I send the bytes string hexadecimal vs as an array of U8. Furthermore, I handle a lot of byte stream in my program and I find the chain tools less cumbersome to use against the array of bytes to analysis of analysis tools - however, they operate only on strings as they appear in normal mode. So I have reasons in different parts of my program to have the channel under conditions normal vs formats hexadecimal; but I can't understand anyway elegant remotely to cast from one to the other.

  CraigRem wrote:

  If the entry will read 1AB1C0 in the normal string format, and the output will read 1AB1C0 as a hexadecimal string.

  Well, you must sweep the bytes of the string formatting hexagonal two at a time for a digital U8 and then cast to a string. There are several ways to do it, here are the two possibilities. (Sure to use the correct representation as Mkae labels).

  

  (I still don't understand your reasoning why you need).

• How use the serial port read and display the text but not scroll off the screen?

  I'm new-ish/return user fan of Labview and trying to change the example VI "Advanced serial write and read VI" is the part of the dev suite 2012.  I need to use the string box for ALL of the text from a serial port, always adding and just roll off the screen when the actuals come to the serial port.

  What actually arrived more than bytes (or no bytes AT ALL!), during reading time text, current rolls out of the box in the chain.  Even when receiving 0 bytes, screen is removed.  I'm not very familiar with the locations of functions and even worse to understand obscure references to functions, so please keep very basic answers so I can follow.

  Just to be clear, I need window of the chain behave as HyperTerminal does always displays the data and it is not pushed by window arbitrarily.

  Thank you

  Steve

  A long shot.

  Is that what you want?

• get the data from the text box by clicking a button and display output text

  Hi all
  
  I have a task flow with two pages. On the first page, I have a text entry box and a command button.whenever I click the button, the data that is entered in the input text box should be displayed as output in the second page.please text after the code for this example.
  
  Thank you.

  Hello

  1. create a bean with a scope of application with any appropriate instance name: myBean_Request.
  2. create a property of the bean with any appropriate name. For example:

  private String textValue;
  

  3 generate the getters and setters in the bean for the text argument.
  4. set the value attribute of the text box to something like this.

  value="#{myBean_Request.textValue}"
  

  5. can insert setPropertyListener for the CommandButton as follows

  6. in the next page set the value of the text output to the

  value="#{pageFlowScope.textValue}"
  

  I hope this helps.

  Kind regards
  Sicard.

• [LIKE, CS4] Import and export text file that contains the tag: encoding problem

  Hello

  I have a script that exports a text selection into a temporary folder (Unicode) text file with label. This file is then loaded in a variable AS and transformed line-by-line for some changes to the text. Subsequently a new text file with the modified content is written.

  Up to CS2 (and 10.4 PPC) this script worked like a charm. He stopped working with the new system and Intel. Meanwhile, I discovered that it must have something to do with encoding problems. «Everything in the old writing with ' as a unicode text "forced a mistake (since AS 2 each text is processed as UTF - 16), so I changed these lines to ' as text '.»

  In addition, I realized, that InDesign exports to tag text Unicode like UTF-16 (little endian), but importing tagged text to UTF-16BE (big-endian). "As variables and" write iconv ' command uses MACROMAN, so I added a few conversions with ""and it worked.

  Unfortunately the last conversion of MACROMA in UTF-16BE converts all spaces in the output string en normal spaces.

  I am therefore a little at my end of the problem. Can someone help me please?

  See you soon

  Tobias

  [InDesign 6.0.4 with AppleScript on Mac OS v2.0.1 X 10.5.8, Intel]

  A code for the relevant parts:

  Export as referenced text selection:

  on TMPexportTaggedText(myFileName, myText, myEncoding)
      tell application "Adobe InDesign CS4"
          tell tagged text export preferences
              if myEncoding = "ascii" or myEncoding = 1 then
                  set character set to ASCII
              else if myEncoding = "ansi" or myEncoding = 2 then
                  set character set to ansi
              else if myEncoding = "unicode" or myEncoding = 3 then
                  set character set to unicode
              else if myEncoding = "jis" or myEncoding = 4 then
                  set character set to shift JIS
              else if myEncoding = "gb" or myEncoding = 5 then
                  set character set to GB18030
              else if myEncoding = "ks" or myEncoding = 6 then
                  set character set to KSC5601
              else
                  set character set to ansi
              end if
              set tag form to abbreviated
          end tell
          export myText format tagged text to (myFileName) without showing options
      end tell
      tell application "Finder"
          try
              do shell script "iconv -f UTF-16LE -t UTF-16 " & (POSIX path of myFileName) & " > " & (POSIX path of myFileName) & "1"
              set myFileName to myFileName & "1"
          end try
      end tell
  end TMPexportTaggedText
   
  

  Line and placement in InDesign (circleLines not the textual changes and throw a string with):

  set theOutput to my circleLines(IN_File & "1", myOptions)
      
  if theOutput ≠ "" then
    tell application "Finder"
      open for access file (OUT_File & "1") with write permission
      write (theOutput) to file (OUT_File & "1")
      close access file (OUT_File & "1")
      try
         do shell script "iconv -f MACROMAN -t UTF-16BE " & (POSIX path of (OUT_File & "1")) & " > " & (POSIX path of OUT_File)
         do shell script "cat " & (POSIX path of OUT_File) & " | tr '\\n' '\\r'"
      end try
    end tell
  end if
      
  place (OUT_File) on curSel without showing options
  
   
  

  The string output with

      write (theOutput) to file (OUT_File & "1") as unicode text
  

  an error of InDesign (bodychecking).

  The problem is not as long as ID's export is little-endian - someone ' one has not heard of Intel chips - but it does not add a byte order mark. If you add a BOM, the problem should go away. Here's how you can add a Bill adapted to an exported file to tag:

  the fileRef value (open for access file "Macintosh HD:Users:shane:Desktop: Untitled - 16.txt" with write permission)

  the value of x to read fileRef

  Set x to character id {711, 731} & x - add THE BOM

  write x to fileRef starting with 0

  FileRef close access

  Then you can read it using "text Unicode", and it should also cross-platform very well.

  And stop putting your file read/write inside blocks Finder - is not the business of the Finder.

• How do you communicate float and image or text so that it remains centered for a given browser window size (aligned horizontally).

  Is it possible to float images horizontally in muse (aligned horizontally) such as an image or a text remains in the middle of a browser window, regardless of its size. The pin function is able to solve this problem but it has the side effect of, well, it pinning. There must be some other way than manually changing the code outside the muse after each change.

  Thank you

  There will not be entered if you have the page open and adjust the width of the browser. It's delicate design and not supported by Muse. Refresh the browser after that resizing should the be seized again.