analyze the 8.5x14?

Similar Questions

• Satellite M100 - I can't analyze the CPU temperature

  I am a Toshiba Satellite M100 series owner (Core Duo T2300, X 1400, etc.). The problem is that I can't analyze the CPU temperature variations in such popular application such as Everest or Notebook Hardware Control. Also any other software provided by Toshiba and installed already on my HARD drive does not include some CPU diagnostics, including temperature changes!

  The only software that seems to work is the HWiNFO32 so there is a thermal probe inside which specifies that Centrino Duo processor temperature, but this software is not very user-friendly :(

  There is a request for Toshiba do something with this... I've updated the BIOS in my template for a version 1.70, but this does not change I could easily noticed (or is he?)  :(

  Hello

  In most cases applications can give you info on the hardware and the different settings but the temperature of the CPU in most cases is not visible. Toshiba has no tool or utility that can read or modify.

  BIOS update has absolutely no influence on it. Satellite M100 is one of the latest devices and I really don t understand why it is so important to you. Important in my opinion is the stability of the system, the operation of the equipment and no problem with the software you are using. Am I wrong?

• Google Cloud Print setup - impossible to analyze the capabilities of the printer

  I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.

  Any help would be greatly appreciated.  I tried the reset email with no luck...

  EDIT - 01/04/11:

  I chatted with HP support, and although the representative was extremely courteous, they could not help me.  The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.

  EDIT - 04/04/11:

  Received a response from the original HP rep that I chatted with online.  In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP...  We shall see.

  EDIT - 05/25/11:

  After 2 months of waiting, HP has corrected the problem.  Don't forget to upgrade to the latest firmware and check all the settings before continuing.

  The fix came from the side server - this defiinitely had nothing to do with the firmware.  I've updated on Monday for the latest on the HP website and it was still not working.   The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.

  Nevertheless, I am happy without worrying how the fix is here!

  It took only 2 months to fix, but I'm glad it is.

• How to analyze the data of 10 bytes encoded in the HH306 of Omegatte data logger/thermometer?

  I am trying to write a simple code for a HH306 of OMEGAETTE thermometer/travailleursduweb.com data recorder.

  That is the problem. I communicate with the device via RS - 232, using Labview 8.5.1 and windows xp. I ask her for "all the coded data", which is actually the only option. He returns 10 bytes of encoded data, the manual describes the meaning of each byte and I understand that. The problem is that I can't analyze the information for use in labview, for example: I want to extract the temperature and simply display it.

  on request, I get: 10bytes (read as a string from the serial port read buffer): display HEX: 02 00 A8 48 FF EF B6 49 B6 03 is perfect, and what I expect.     Display codes: \02\00\A8\B6H\FF\EF\B6I\03 The Normal display is a series of special characters, I don't understand, especially since I don't think they are ascii characters that must match returned hexadecimal numbers!   For the life of me, I can't understand how to extract the information (what are the 48 6 hexadecimal display) of what is returned. All string manipulation functions seem to work only on what is given in Normal view. (The 4th and 5th byte of the data are the codes of the BCD for temperature: for example the temperature was 64.8 degrees farenheight when I took this reading).

  Can someone help me to analyze the data returned by this device?

  Ok... I think that I thought about it. I found this: http://digital.ni.com/public.nsf/websearch/77C8F61D36F5A23086256634005ACB38?OpenDocument.

  I guess the normal display garbled is corresponding to each hexadecimal ascii characters. I'm just not used to seeing characters beyond the decimal number 127 ascii or hex 7F.

  So, basically, to analyze the 10 bytes of data:

  (1) break the string read from the serial port in the 10 ascii characters (using String subset vi)

  (2) son of each output string in the left input of 10 separate Type vi Cast.

  (3) wire a constant U8 in each terminal 'type' VI Type Cast.

  cables of 4) the chain of each Cast of Type vi output to the input of a number hexadecimal string vi.

  (5) concatenate or use as you wish as hexadecimal numbers (now in string format) which cause.

  See you soon.

• analyze the 2 bytes at a time series data

  I am acquiring 8 bytes of serial data and I would like to analyze the data in 2 bytes of data, so that I find myself with 4 measures of different temperatures. I tried a lot of things that I found in the forum, but I can't make it work. I have attached the VI is using string function analysis, but I'm not very familiar with this function. My fault my serial data so that you can see the data that I get.

  Thanks in advance for your help

  Lowski

  See if it's to help you get started. You must understand the scale yourself.

• Analyze the text and identify which columns contain unpaired data

  Hello world

  I want to write an elegant solution in LabWindows-CVI to accomplish the same thing as what I implemented in LabVIEW.

  The client does not use or do not own LabVIEW.  I have to code the solution in the CVI.

  Order to simpify the explanation of what it is that I try to do, I wrote a small example in LabVIEW (see below):

  

  The code needs to parse a string to determine which data column includes unpaired.  To do this, I first removed the unwanted text on the top and bottom.  I also removed the extra space between the 2 groups of data by replacing the two separated by one to facilitate the next step.  The result string has been converted to a table 2D-string.  Only the columns you want to search for remained (total of 16 columns).  Table 2D has been transposed as the table 1 d of research searched each line, I want to look in each column.  2D table transposed in its entirety was sought of all no corresponding values, which fills a table 1 d of boolean.  I converted the table 1 d of boolean to a number to see if data 'no match' has been found.  If none have been found, the value would be zero.

  I need help to encode this in CVI.

  Thank you very much

  RayR

  Ray, aspect string makes me think that it's a memory dump, while I designed a solution that analyzes the values of the whole of the chain and operates on them, instead of working on the string itself. Take a look at the attached example which should be what you're looking for. feel free to add comments or ask for clarification on some instructions if you need.

• Photosmart 7520: Impossible to analyze the documents of legal format on HP7520

  I've read the post of the so-called solved this problem, but NOT for me.

  I use Photoshop > import > HP Photosmart Twain... I have setup the parms legal analysis and I have the document using the charger from the power supply.

  It scans but cut above the bottom.

  I am unable to find any setting in the printer to be configured for legal size, I suppose that the charger has NO need!

  I'd appreciate your help!

  Thanks in advance for any help!

  Hello there @Skoutariotis , I hope you're well

  I read on digitization as legal size problems you are currently experiencing and wanted soft hand with my suggestions.

  The Photosmart 7520 should be set to analyze the legal size through to choose parameters in the HP scanning software, I posted below as an example.

  If the options are not in your printer software as described, perhaps the full functionality driver and the software is not installed, which you can download and install it here: HP Photosmart 7520 e-all-in-one printer full feature software and drivers

  You can also check for a firmware update and complete if necessary, which can help as well:

  Get the latest Firmware and updates

  You should see the option to select to analyze as legal size in the printer software.

  I hope this helps, have a wonderful weekend

  

• How to analyze the data of the cDAQ and Signal Express, especially after analysis?

  In the first series of tests of my instrument, it took longer than expected for the race.  Thus, the data was saved in 6 days.  The file is too large for export to Excel.  At the beginning of the project, I was as ignorant as I could go ahead and add analysis and the scaling of measures.  By the scaling, I mean my data of switching current dew points or whatever it is that I record.

  How to evolve the data to read the output data as expected 4mA = point of dew of-20 C or 0 PSIG?  Can I pre program this to be recognized for each event?

  For real analysis I am doing – I would first analyze the data I recorded and choose different points to send to Excel to graph and analyze.  Is this possible?

  Secondly, I would like to know how to scale and analyze my data in the project without having to do this later analysis in the future?

  I have a cDAQ-9172 with LabVIEW signal Express 3.0 that uses four modules - 9211 2 modules of thermocouple, my 4-20 1-9201 module +/-10V module and 1-9203.

  Thank you for any assistance.

  Hi Patricia,

  "' You can do this by adding a step Load/Save signals ' analog '.  I hope this helps!

• How to analyze the image url in json?

  Hello

  I get the response from the server and crawled through json. And display it in the field

  Like name1 as:

  try {}
  labelField1.setText (jsonObject2.get("name1").toString ());
  }

  catch (JSONException e)

  {
  System.out.println ("JSONException Description");
  }

  Similarly, I want to make the image. How to analyze the url of the image and display it in the BitmapField?

  You must create a separate thread to extract the bytes of the image of the URL you have.

  You can use the following code to get the image to the server.

  public EncodedImage getImageBytesFromURL(String url){
          ConnectionFactory connFactory = null;
          ConnectionDescriptor connDescriptor = null;
          HttpConnection httpConn = null;
          InputStream inputStream = null;
          byte[] response = null;
          try {
              connFactory = new ConnectionFactory();
              connFactory.setConnectionTimeout(10*1000);
              connFactory.setAttemptsLimit(1);
              connDescriptor = connFactory.getConnection(url;interface=wifi);
              if (connDescriptor != null) {
                  httpConn = (HttpConnection) connDescriptor.getConnection();
                  inputStream = httpConn.openInputStream();
                  int responseCode = httpConn.getResponseCode();
                  if(responseCode == HttpConnection.HTTP_OK){
                      response = readStream(inputStream);
                  }
              }
          }catch (IOException e) {
  
          }finally {
              try {
                  inputStream.close();
                  httpConn.close();
                  inputStream = null;
                  httpConn = null;
                  connDescriptor = null;
                  connFactory = null;
              } catch (Exception e) {
  
              }
          }
          EncodedImage encodedImage = null;
          if(response != null){
              encodedImage = EncodedImage.createEncodedImage(response, 0, response.length);
          }
          return encodedImage;
      }
  

  Remember that this method should be in a background thread. Otherwise, your user interface crashes. The encodedImage that returns the method above can be easily converted to bitmap and set in your bitmapfield.

• How to analyze the object in the soap response in Blackberry

  I am new to blackberry develipment.i developed using Momentics IDE. Now, I'm working on the integration of Soap Web service. Now my webservice function call works. I answer also. My webservice response, it's like

  http://shidhints.com/">booleanstringstringint    string    string
  

  While parese the answer, now I can analyze and get the token, NumberofReferral but I can't analyze the ListEmails object. How do I analyze this ListEmails, me, pleasehelp

  const QtSoapMessage& response = m_soap.getResponse();const QtSoapType& responseValue = response.returnValue();
  
  m_Token = responseValue["Token"].value().toString();
  m_NumberofReferral = responseValue["NumberofReferral"].value().toString();
  

  use QtSoapArray for that.

  I think this could work:
  QtSoapArray & email = (QtSoapArray &) responseValue ["ListEmails"];
  work with count() and iterate over the table to retrieve the values.

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• How cut the length of the string IE channel name here, if it exceeds 20 characters or letters. The channel name is dynamically analyzed the spreadsheet/xml file.

  How cut the length of the string IE channel name here, if it exceeds 20 characters or letters. The channel name is dynamically analyzed the spreadsheet/xml file.

  My Council of Europe in the .js file is

  function generateHTMLMarkup (i, channel) {}
  Alert ("this is lang" + str);
  var str ="";
  "Str += '.

  ";
  str += "" +
  "" channel ['name'] +.replace("Low",".") + ""+""
  ";
  "Str += '.
  "+ ""+""+"
  ";
  Alert ("this is lang" + str);
  return str;

  }

  nerateHTMLMarkup: function (i, channel) {}
  Alert ("this is lang" + str);
  var str ="";
  "Str += '.

  ";
  str += "" +
  "" +
  "" + channel ['name'] + "" +.
  "" + "
  ";
  "Str += '.
  "+ "" + "
  ";
  Alert ("this is lang" + str);
  return str;

  etc.

  Give mthe rhythm and the exact code where Ihave tio get implemented.

  in the code, replace change

  channelName var = channel ['name'];

  TO

  channelName var = channel ['name'];

• How to analyze the .m3u?

  Hi all

  I get a file m3u of URL containing the playlist. can someone suggest me or give any idea to analyze the .m3u file and how to get the url of file m3u mp3.

  Thank you...

  Download the m3u as a string. then extract the location of the mp3 files and feed them to the application of data flow.

• How can I analyze the flow on SF302 - 08 p

  Hello

  I have a SF302 switch - 08 p and I'm looking for an option to analyze all streams on it. I tried to enable netflow, but it seems that the product does not support because I can't access the stream ip like here: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/netflow/configuration/12-4t/nf-12-4t-book/cfg-nflow-data-expt.html

  Here is some information on the switch:

  switch08G4 #show version
  SW version 1.3.5.58 (date October 10, 2013 time 17:15:41)
  Start the version 1.0.0.4 (April 8, 2010 time 16:37:57)
  HW version V30
  switch08G4 terminal #configure
  switch08G4 (config) #interface range 1-8 FE
  switch08G4 (config-if-range) #ip
  ARP ARP configuration commands
  configuration DHCP DHCP services
  Guard-defined source enable IP Source Guard on the interface status
  switch08G4 (config-if-range) #ip infiltration flow
  % Unrecognized command

  Thank you for your answer

  Hi Emmanuel, this product does not support anything like Netflow. Your next bet is SNMP and who would probably not do what you want, if you are specifically looking for the Netflow feature sets.

  One thing I have a question, when you say "analyze the flow of all", does that mean that you want to capture all the traffic, you can record and read it again? The closest you can do with is doing a session on the monitor for a VLAN integer and launch wireshark there to capture the data. I'm not sure that's what you want, but if you want to capture all packets and save it somewhere, it's a way to do it, but a bad way to do it.

• analyze the logs of pix

  With Websense software, we can get a very detailed report of active internet. What time, what web page that requires not only the web site in the report.

  I can get the information in the report by analyzing the pix message? I want to get not only the web site web page. For websense is very expensive.

  Unfortunately, the pix provides only the IP address and not the FULL domain name. That could change in v7.0, given that the Pix will be URL inspection capabilities.