Ray material blue feature in sony all in one to stop working but dvd works

Similar Questions

• My C5280 All-in-one has stopped working, I get one! signal on the front panel, please help.

  My HP Photosmart C5280 All-in-One worked perfectly well and suddenly stopped working, started to blink and all I get is a! sign on the front panel, I use Windows 7 64-bit, please help!

  Hello waldonan,

  The first thing that we should try to do is a power reset on her pinter.

  Reset the printer

  Follow these steps to perform a reset of the product.

• 411 wants 110 all-in-in-one: Envy 110 411 a all-in-one has stopped working

  I want to 110 411 a all-in-one. I use the scan function - I don't use it to print or copy. I got it for a few years with no problems.

  Yesterday, when I went to scan a document as usual, he does not work and I had an error on a «transport jam» At the same time, the front where we load open paper sheets and the small arm (or what you call) that one up the paper also balanced out and remained outside. I don't know why that would happen, since I chose Scan and not print or copy them.

  I watched the online instructions and video for a carriage jam troubleshooting and followed the instructions, but transportation seems to be OK and there is no jam. No instructions troubleshooting that I saw mentioned the part about the lifting of the front and the arms of Briefcase to come. So, even if the error message says something about jam of transport, which doesn't seem to not be the problem.

  At this point, I followed the complete sequence of the steps in troubleshooting many times and they have not helped. In fact, I got a message saying that the device will be shut down to avoid damage. Help, please! I don't want to buy a new scanner right now!

  Dianne

  Hi @Dipena,

  Thank you for answering my questions!

  Please double check, that all steps have been taken in the following guides:

  1. Displays a Message ' Transport Jam '.
  2. A message "Paper jam".

  If the guides above are complete and has not solved your problem. Please contact HPtelephone support for further assistance. Repair printer / or replaced. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Sony Self Extracting package has stopped working?

  So, I got an Acer Aspire 5253, and I try to install Sony Vegas Pro 9.0 trial, since it is the cleaner version, produced. I tried Pro 10 and 11, and they run painfully slow. Anyway, every time I try to install it (9 Pro), I get the same error

  "Sony self-extracting package has stopped working".
  I tried to download the trial of countless sites, including the Archives of download of Sony, but nothing works! I have the feeling that it is a driver problem but I tried to modernize, start in safe mode, etc.; But still the same error.
  That's what happens with:
  Signature of the problem:

  Problem event name: APPCRASH

  Application name: vegaspro90_32bit.exe

  Application version: 1.0.0.1

  Application timestamp: 49d55ff5

  Fault Module name: vegaspro90_32bit.exe

  Fault Module Version: 1.0.0.1

  Timestamp of Module error: 49d55ff5

  Exception code: c0000094

  Exception Offset: 0008018d

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789
  The 64-bit version does the same thing, so I don't think that is the question. Another thing is weird, I tried downloading versions Pro 7 and 8, and they say the same thing...
  Help, please! I tried the Sony site, responses from Yahoo and other sites, but I don't think it's a problem with the software, but windows.

  The machine material is perhaps too fast for the software runs correctly?  Do you use SSDS as primary drive?  If so, can you install the program on a slower hard drive?

  This is the type of error, I think, this is only a guide to prove the error and not a solution as such.

  Division by zero
  http://www.Tek-Tips.com/viewthread.cfm?QID=1254517

• All USB keyboard has stopped working

  Hello

  All USB keyboards have stopped working on my installation of windows 7. They work fine in the BIOS or on my Ubuntu installation. When I plug a keyboard, it still gives an error code 29 (drivers not found). I tried using two keyboards: a Logitech Gaming Keyboard G105 and a fairly generic wireless keyboard (a dongle to connect to the computer).

  I tried to uninstall it from the Device Manager and plug or restarted again, but the result is the same. Windows Update cannot find driver updates, and a system repair disc doesn't detect any problems. I temporarily created a fresh install of windows 7, which recognizes the keyboards very well. There is no driver available manufacturer (attempt to all keyboards are supposed to use the base drivers), and the keyboard Logitech gaming software does not see that it is there. 'Control Panel-> devices and printers' keyboards of lists of names, but the shows not even the stuff of work that is just under the Device Manager and the problem-solving the tent and is unable to find the drivers again. Try to select the driver HID keyboard in the Device Manager just in fact give the code 10 error (device does not start) instead.
  Nothing I've tried has gotten me anywhere. I would rather not re-install Windows 7, like all the time and effort to get my system how do I like it took me forever, but I can't see how I solve this problem. Any help would be appreciated.
  Thank you
  Zoden

  There is a good chance a "repair" install will fix the problem as a "repair" install should re-create any missing or corrupt driver installation file.

  I don't see anything definitive where observer records but can provide you with the following file, which can provide more specific information:

  C:\Windows\inf\setupapi.dev.log

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  How can I get HP 3015 all-in-one Scanner to work with Windows 7?

  Probably, you mean a Laserjet P3015 series multi function device?

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=3815798&prodTypeId=18972&prodSeriesId=3815797&swLang=8&TaskID=135&swEnvOID=4062

• On eBAY, I can't use the sorting feature, expand, or look at this point - I used to be able to do with firefox and all of a sudden stopped working. I think it was the last update of Mozilla Firefox. What can I do?

  eBAY has stopped working the way that it used with Firefox, my browser. Sort, enlarge the picture, look at this point - they are all no longer work.

  URL of affected sites

  http://eBay.com

  Firefox 3.6.4 and 3.6.6 use a process called, "plugin - container.exe" who was using much of my CPU when I open several tabs containing Adobe Flash files and locked up Firefox.

  My solution is to use Firefox 3.5.10, which you can get on the Mozilla site at http://www.mozilla.com/en-US/firefox/all-older.html
  I use Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the date of issue, in my opinion, it contains all the latest security fixes in "Firefox 3.6.4".

  If all goes well, they will set Firefox 3.6 in the next version (for example Firefox 3.6.7), until then you should probably use «Firefox 3.5.10»

• DeskJet f335 all-in-one: deskjet f335 all-in-one, says no paper but prints a sheet of test without problem

  DeskJet f335 all-in-one does not recognize that there is paper in it.  Prints a page of test very well.  Will not print a document.

  So far, I disconnected and detached, has released the ink cartridges, expected 5 minutes, then restarted the computer, plugged into the printer and attached the usb between the 2.

  The message on the screen of the computer has changed to "error: no more paper" to "on paper."  Otherwise, no change.

  Any suggestions?  I think there is a secret combination of buttons to push, which will operate - as pressing undo while pressing the color printing prints a self-test.  Anyone know the secret?

  Hello @eac510!

  Thanks for posting on the HP Forums!

  I see that your computer displays the printer's paper when you print a document.  You also mentioned that the printer is successful when you make a report self-test.  If the printer is able to print a self-test report then the material works correctly and you are probably looking to a software problem.  Unfortunately there is no combination of buttons on the printer to solve this problem.

  The first thing I recommend is to uninstall the HP software. Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To perform a disk cleanup, click here: perform a disk cleanup

  To download the HP software, click here: HP Deskjet full feature software and drivers

  Please post back and let me know if this worked for you.

• C410a HP e-all-in-one: C410a stopped printing during the conversion to Yosemite

  My HP C410a printer will no longer print.  When I go through a normal print request, the pop-up on the printer says it's "An opening printer connection" and then after generating download % complete feeling, he said: "the printer is unresponsive.   What should I do to get the printer to work again?

  I turned off, disconnected from the power source, restarted the printer and the iMac, deleted the list of Printers/Scanners and re-installed printer.

  Hello @rmahp,

  Thanks for getting back to me on this subject. I'm glad to hear that you are able to print correctly on your computer Mac OS X 10.10 to your HP Photosmart Premium Fax e-all-in-one printer. Because your printer is working and you see your device in your dock, it would seem that you are using the correct driver.

  When you run the permissions of the drive stage, it's OK not to check before repairing disk permissions. But it's a good habit in the future to check before the repair as the verification process will help identify all the questions that are found on your computer that will resolve itself with the repair process. However, if everything works you shouldn't have to worry about this step.

  The version of the HP 3.0 software package is supposed to install on your computer by using the Apple updates feature. I suggest only manually downloading as a troubleshooting step because I can't guarantee that your Apple updates will find this package. I'm being proactive making you just do this step manually. Once again, no worries for having your printer no download function and installation of this driver package manually.

  I suggest that you continue using your printer. If, on the road, print starts to act up again just run the steps I provided in my post to manually resolve this problem.

  Good day!

• All equipment Linksys has stopped working! But having internet with NO LinkSYS equipment

  My setup is eccentric, but worked for a long time. It stopped working Friday. Let me first say there is a reason why I put in this way. The reason for my configuration is based on the location of the different IP and hardware when I bought at the origin of the material (in case your wondering why I am not a different route). All network card/devices and routers are Linksys. The LinkSYS device not only is a Netgear print server and 1 PCI card installed on a 2nd PC.

  Here is my configuration: A modem high speed, a wireless BEFW11S4 (4 port on the router). 1 unused port. Port 2 of a second wired router (for DIRECTV VOD and VUDU future) across the House. Port 3 to a local PC. 4 port wireless router WRT54G on the end of the House (I used one of the ports not the WAN connection). Wireless is enabled for both routers. DHCP is disabled except for router main basement. I treated all the routers beyond basement one as gateways by saying.

  My problem: I have several PCs with wireless cards / devices. That work is 1 XP Dell laptop, as shown below (not Linksys) and the fact wireless and also via a wired connection. Directv is also wired router (2nd line). The Wii also works or wireless router. Of course, my PC to the first router also sees the internet. All locations to see both routers with 80% of signal. My House is small, but limitations of the wiring, it's the best solution to get internet.

  MY PC, given models configurations are Linksys except as indicated:

  1 PC XP w/WUSB54G (USB adapter)

  1 2000 pro w / Netgear WG311 (PCI card) very old PC and sees no internet, what to look for and find two routers with high signal. Internet has worked in the past, though that is not used for a while. I can possibly assume it just does not work or can also be linked to this issue.

  1 Dell XP with internal wireless (works very well!) Will work with a router wireless and communicates also with print server with success.

  1 2000 pro w/WPC11 PCMCIA card

  1 XP with Linksys PCI card (don't have handy model number)

  I also changed the ports of wireline equipment to check that it was not a bad port. I have an internet connection on non-material Linksys. Some of the computers that I use on a daily basis, others not were lit in a time very long. After the problem, I decided to check these computers also. I did not any changes to the configuration. As I said I came home and noticed no internet and went to fix the problem. I used the Linksys software on all of the products listed to configure the network. (Supplied with each equipment original disks) It will show you, we can see the routers, shows NO internet connectivity but appear sees a router, it is not the internet. I want to emphasize that I did not change any installation, it just stopped without warning.

  Initially, I assumed that it may just be the wire to a router. (WRT45G). I have also unplugged all the material, renewed IP, rebooted the PC and modem repowered. What bothers me is that the DELL works fine, including being able to print, the Wii is very well and speaks and I can renew IP and download VOD since the second wired router and receiver DIRECTV. Also, I assumed that maybe it was a problem with a new patch from Microsoft, but some of the PC were not on months, although until this problem. Thank you for taking the time to read this long post. I tried to be as complete as possible. Any suggestions or ideas appreciated. I have found no solution on this forum or on the internet.

  NOTE: I also reinstalled 2 PC software, including returning my WEP. This has not solved problem either. Problem remains the same. I also checked the internet properties and network configs (on the PC) although I can't imagine every PC has changed itself.

  It doesn't seem to be an adapter or your computer problem, from what you described, I guess that your router has some problems of connectivity... You must reset your router and then re - configure both...

  As you explained that a computer for the first router connects to the internet, you can download the firmware of the router first and upgrade... You can download the firmware here

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Similarly, upgrade your second router and update its firmware... I think that after this, you should be able to get the connection on all computers...

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP f2110 all-in-one will not work

  Just my laptop was restored following a nasty BSOD. Printer has worked before. Does not work now. Printer has power and works. When I click on HP digital imaging monitor I get a box saying - peripheral Hp No. have been detected. HP Solution Center will close now. I downloaded the driver online (can not find disk) still no luck. Any ideas?

  Hi Dominicjack,

  1. You are able to print using other Windows applications?
  2. You are able to print a test page?
  3. Ran the installation of the printer setup?

  I suggest you see if you can print the atest page.

  Print a test page

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

   

  If you are unable to print the test page and then download and installdriver and full features software on the HP site, check if it works.

  See also below link for more information.

  The all-in-One HP products - solve installation problems for connected USB all-in-one Windows products

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• [Re: C4240 all-in-One] Printer is installed, but am trying to re - install when

  Greetings-

  I'll have a more annoying problem. My C4240 is installed and works fine, except that whenever she is on (I'm not my gear on 24/7), the

  PC detects it as "new hardware" and 'new storage device' and passes by the automatic installation procedure. It is terribly boring, and I can't seem to stop. I do not understand why the installation attempt is performed when the printer is already up and running.

  I searched on this topic, but have not found anything yet, but will continue until I find something or someone responds here to research. Thank you to

  advance for your time.

  Data sheet:

  Windows XP Home Edition SP1

  HP C4240 all-in-one

  Wireless Internet

  Hope that is enough information.

  Thanks again-

  C.M.

  Thanks for your messages

  Recommended here is a critical update which can be downloaded here

  critical update

  Suggestion of Dextre is a workaround that disables the CUE device detection and the client might lose some features

  Run the update as the best solution.

  Once you have installed the update please check that CUE Device Discovery working again

  Kind regards

• OfficeJet 7310 all-in-one will send faxes but not receive them!

  My fax test says 'success' completely, faxes come, but my all-in-one ignores the incoming faxes.  It is set up as usual to answer on the second ring, double joints.  It just will not pick up... All solutions?

  Cachou

  the auto answer option is turned on?
  
  and follow THIS document.