Anforderungscode, Rubis

Hallo, beim Offline-Aktivieren von light Room 6 Upgrade von 5 includes yesterday das ebenfalls Internet-problem beschriebene Offline Activation . "Im Schritt 1" die zu verwendende ID wird der weder noch erzeugt displaying. A tun of zu, um die wondering und Weltmarkt ist auch zu koennen use software. Anderenfalls muss ich sharp zurueckgeben. Danke.

Hello

You will need to contact support by calling/chat for this request.

Contact the customer service

* Be sure to stay connected with your Adobe ID before accessing the link above *.

Kind regards

Sheena

Tags: Adobe Licensing

Similar Questions

  • Serial number rubbed off after only 4 days on Satellite Pro L

    I would like to express my shock that important information on the back of my laptop almost completely rubbed off after only four days of use, Inc. serial number, model number, voltage/ampage, etc.. I bought a toshiba laptop on the premise that their laptops were reliable compared to the rest. It bodes not well when something as simple as a series rubs number turned off after such a short time.

    At a point, this information is important for situations of warranty/returns? I hope not. However, even if not, is there anywhere else on the laptop where this information is displayed?

    Thanks for any help.

    Hello

    First of all the series (series of windows key) which is placed at the bottom of the unit is an OEM key. You cannot use it in relation to other OS.
    The OS from Toshiba is already enabled and therefore the serial key is not necessary for you.

    The serial number of the laptop is also placed at the bottom of the unit.
    And as suggested by Feliks portable low s side doesn't touch the table at all. So it cannot be rubbed. What can happen if you carry the laptop in the laptop bag or where the bottom of portable computers would be rubbing against the surface of the bag.
    Perhaps you could ensure the label using a tape or similar

    See you soon

  • 3632 inkjet: ink rubbing

    I have a brand new HP 3632 using expensive HP (HP-63) and HP CR670A 5 star glossy paper ink.  Only black ink rubbed off.

    This occurs only with glossy paper, matte paper does not rub off the coast.      I don't know what good this forum is so HP

    has no entry in the solutions.    HP technical support has been excellent... no more!   Seems that when you can actually

    speak in a human voice, all they do is give you the ideas off a screen and really have no idea what is really bad.   Maybe it's time to switch to another brand of printer.

    RCOM

    Black pigmented ink is not compatible with the glossy photo media.  Make sure you select the type of paper in your driver.  Selection photo glossy in the driver causes the printer to use only the color of dye based inks to render the page, including the black areas.

  • Audio files of e-mail rub through

    Hello world

    I get a lot of noise by e-mail (for my work). I use Apple Mail El Capitan.

    But there is a problem that I can not understand:

    The rectangle control for sound (playback/volume), I can't rub across my sound.

    When the audio is 3 minutes long, can not rub through to the end with a single click, I have to wait.

    Is there a way to activate a preview of actual control sound? Perhaps a work around for a plugin or the change of default player use in Apple Mail?

    I hope that you understand me, I am not

    Try right click on the attachment and select "quick look"... You can rub out.

  • How to rub my laptop in order to prepare for recycling?

    Hello.

    I'm rubbing my MacBook Pro (15-inch, mid 2009) to get ready for recycling.  I want to erase all documents, pictures and applications for security reasons, but I don't know how to do better work on it.  Any suggestions would be greatly appreciated.

    Thank you

    Robert

    This article is a good start: what to do before you sell or give away your Mac - Apple Support

    -AJ

  • I can, t find my serail number its rubbed off the coast in the years

    It is in any case I can find my serail number I have a windows vista home basic laptop

    Hello

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

    Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

    If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

    The methods above do normally not require product key that has rubbed off.

    The recovery process should include the auto Activation using the factory installation product key, in collaboration with the material.

    See you soon.

  • System broke down and I need to reinstall Windows, but the key has rubbed off the sticker. How can I find?

    Windows product key

    ACER ASPIRE

    Windows vista installed installed at the factory. I don't have the disc, but I do not have the upgrade disk that I bought. Windows sticker on the side is rubbed but I don't have the last 5 numbers. my computer crashed, but I go back to where it asks me to enter the windows product key, but this is what I don't have. Windows were told to call acer and acer said it doesn't have this info. any suggestions? If I install a newer version or I have to buy a new windows disk to save it, what I have to buy windows vista? and if windows vista, do you think I can go and install the upgrade disk I have? Thank you

    Hello

    I found this line for you:

    http://support.Acer.com/acerpanam/desktop/0000/Acer/AspireE360/AspireE360faq29.shtml

    http://Acer.custhelp.com/app/answers/detail/A_ID/4587/~/what-is-the-SNID-number%3F

    This site list U.S. phones Acer:

    http://www.computerhope.com/comp/Acer.htm

    There is a phone number here:

    http://us.Acer.com/AC/en/us/content/contacts

    See you soon.

  • The sticker on the back of my laptop has rubbed off. If not, how can I find this information?

    Original title: KEY of MICROSOFT

    THE STICKER ON THE BOTTOM OF MY TOWER H HAS RUBBED OFF THE KEY NUMBER OF MICROSOFT WHERE I CAN FIND

    This freeware will reveal the information you're looking for:

    http://www.Belarc.com/free_download.html

  • The serial number on the bottom of my laptop has been rubbed off. I can find it somewhere in the system?

    Original title: my serial number

    The serial number on the bottom of my laptop has been rubbed off.  I can find it somewhere in the system?

    Hello

    If the operating system is preinstalled, as it appears as the product key sticker was on the bottom of the laptop, NO, you will not find a product key that you can use for any purpose useful in your system.

    The only product key you would find in your system is the manufacturer factory Installation product key that is used for multiple facilities only during the original production.

    If you want to reinstall the operating system, contact the manufacturer and ask him either send you recovery disks to reinstall the operating system, what they should do for a small cost and also ask them if you have a recovery partition on your laptop to do the same thing, which is to reinstall the operating system.

    None of these methods relocation normally requires that you insert a product key when reinstalling.

    See you soon.

    p.s., serial number (SN: xxxxx) is to do with the identification number to the manufacturer if you ever contact them so that they can search for details of your laptop and there's nothing to do with the product key.

  • What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows?

    The key to Windows inlegible sticker, want to reinstall windows

    What can I do if I can't read that the key is for Windows because of the part of the key on the sticker has rubbed off and must be re-installed Windows?  The product ID is located under the control panel > system maintenance > system > Windows Activation of a useful?  I don't want to end up with a Clipboard after that reinstalling Windows because I have a legitimate copy of Windows, but the key became disfigured over time, since it's on the bottom of the laptop.  I have Windows Vista Home Premium SP 2 running on a Dell Inspiron it's way outside the guarantee of its window.

    Thank you!

    Hello

    If you have a product key on a sticker in your computer, this means that you have an OEM product key. If you have OEM keys, this means that the windows you have here is preinstalled.

    If you reinstall windows OEM copy, you must use either the original manufacturer recovery disk or the recovery partition. If you use one of the people, should not be put to any start-up because the windows OEM versions are technically preactivated.

    If you don't have a disc or a recovery partition, you can contact your OEM (DELL) so that they can send you a disk. Alternatively, you can contact Microsoft Support just in case. : D

  • I have vista, want to move to 7 but need to save on the hard drive content; Please suggest how I rub off the coast of virus, evil & spy when recording off content before loading of 7... ?

    OS: Vista home prem

    h/w: Dell Studio w/Centrino core 2, 2 GHz, 4 GB ram

    I want to rub the data as I save to an external hard drive, and then reload the OS with 7.

    Don't know what to use as a scrub tool and how to perform the backup off with scub.

    Please notify

    Hello

    1. which version of Windows Vista is installed on your system?

    2. you try to upgrade from Windows Update?

    First of all, I suggest you perform a scan complete antivirus on your computer and make sure your computer is free from Virus or malware.

    Method 1: Run a virus scan

    I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

    Now you can transfer your files by using Windows Easy Transfer

    Method 2:

    Step 1:

    I suggest you to Windows easy transfer to download and install it to transfer files on a hard drive.

    http://www.Microsoft.com/download/en/details.aspx?ID=14179

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

    Step 2:

    Know if your PC can run Windows 7

    http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

    Step 3:

    To upgrade Windows Vista to Windows 7, follow the link below.

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

    Note: If your edition of Windows Vista can not be upgraded to the edition of Windows 7 that you want to use, you can always install Windows 7 using the custom to place installation option. However, the custom option keeps your files, programs or settings.

    It will be useful.

  • Vista license rubbed off the bottom of the netbook.

    Long story short, I was able to recover the key to home premium 32-bit to vista with jelly beans, but when I try to activate this key, it gives me the error 0XC004E003 code.

    The tag under the netbook rubbed off so I can't copy. I made sure that I copied the key correctly but no luck.

    I don't want to pay $50 for phone support or even $15 for the recovery disc (like the one on the partition does not) because it is a legitimate question and not a joke to mark a free window (more wouldn't you want to get windows 7 anyway?)

    Please help me I have 29 days left.

    Thank you for your help.

    frenchfrog_69

    Thanks for your help,

    I just use my other computers button, and then the phone number came, so now that it has validated. Thank you!

    FACT!

  • How can I find my product key if my hard drive is empty, my product key is rubbed off and I don't have the owner of the instillation

    How can I find my product key if my hard drive is empty, my product key is rubbed off and I don't have the owner of the instillation

    Hello

    "my HDD is empty, my product key is rubbed off and I don't have the owner of the instillation.

    in this case we cannot help you find your product key

    If vista is preinstalled ask that the manufacturer of the computer is that they will sell you recovery disks and also ask them if a product key entry is required on your part when installing the same

    It is not normally; but ASK them

  • My activation code for Vista has rubbed off the label

    How can I get it back? I had to do a total reinstall and now vista needs a product key and half of it is rubbed off

    Contact the PC manufacturer, only that they can provide the key

  • Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

    I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

    * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

    Hi jsserrano68,

    Read the following article about the product keys for Windows:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

    In addition, if you need to contact Toshiba support:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

    Thank you

    Deb

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for