Angular2 is running with phonegap?

Similar Questions

• Comply with the requirements for El Capitan if I have a Mac Mini MTN. Lion and 2 GB of memory running with a 2.4 GHz Core 2 Duo?

  Comply with the requirements for El Capitan if I have a Mac Mini MTN. Lion and 2 GB of memory running with a 2.4 GHz Core 2 Duo and 1.07 GHz and 3 MB of L2 Cache bus speed? Recommend - install you more memory and if so, why?

  1. Yes.

  2. Yes. Any newer version of Mac OS X 10.6.8 is likely to be sluggish on only 2 GB of RAM.

  (141471)

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• void VI does not run with the main VI.

  My main and sub VI is attatched.

  danil33 wrote:

  Re: void / VI does not run with the main VI.

  When you start your main program, the Subvi is called and the main VI must wait the Subvi before it can continue. However, the Subvi is not set to open the Panel before, so very probably that it runs in the background for 100 seconds (1000 iteration to 100ms), because no one can press the stop button at the beginning to put an end to the Subvi. Once the Subvi is completed, the last value is returned to the main VI via the output connector and the main VI can process and display this last value. At this point, the main VI stops, because it's done (hopefully you do not "continuous operation").

  Obviously you have some misconceptions of beginners on the stream. Please we tell exactly what you expect the program to do, and we might be able to point in the right direction.

• If you run the program Setup 'Run as Administrator', executable runs with high fees?

  Hello

  Installer of LV chose "run the executable at the end of installation.
  If you run the installation program "Run as Administrator", the executable runs with high fees?

  Best regards

  My apologies - configure when the installer to "run the executable at end of installation", it will run this executable with the admin rights because the installation program itself requires administrator rights.

  LabVIEW installation program can create registry keys for you.

  For your more advanced customization (e.g. selection modules), you have to look different (e.g. InnoSetup) using a solution of installation or you would need to write an executable in LabVIEW that you run after installation that allows you to select the Setup programs you want and run them using System Exec.

• RunAs with the /savecred option does not accept the credentials stored by the cmdkey command

  Hello

  I am trying to automate the storage of credentials for profiles of several people on several servers so that they can use it with scripts, they will use that have the command 'runas' with the /savecred option.  I use the command "cmdkey" to store the user and the password, but when the runas command is run, it prompts for the password anyway.  I know that the /savecred works since if I leave the command-line runas for the password and I enter, on subsequent runs, he is more requested for the password.  Curiously, if I use the cmdkey command to replace the stored credentials, runas invite you again the password so it can store it himself.  Almost as runas does not 'trust' cmdkey.  Any thoughts on why this can happen and how can I get around it?  I really need to automate the identification information storing or it will take a couple hundred manual executions of the runas command to get this store on the profiles of all the people in need.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

• How windows Defender to continue to run with security essentials

  How windows Defender to continue to run with most of the security. When I installed the essentials Defender stopped running. I tried everything I know. missing in admin tools and all programs and it starts and stops. Oh, I'm on Dell Inspiron 545 Vista 64-bit Service Pak 2

  Hello

  Defender is NOT supposed to work with MSE, and there is no worlaround.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Why won't my PC now run with 2 1 GB Ram?

  In April 2008, I bought and built a PC with hardware for Overclockers. 1 card mother Asus P5K, 1 Intel Core Quad Q660 Pro 2, 4 x 1 GB DDR2 Crucial, MS Vista Home 32-bit ballistics. He ran for a while, then began to blue screen - Bios loop, in camera. Discovered that software 32 bit no longer works the 3 GB of Ram, so if she had a dream running with only 2 GB of Ram.

  Recently loaded down what I thought was an update from MS, has proved to be the Windows Live Messenger 2011 (Build 15.4.3502.922) Version. But, Ok!

  Now my current problem. Everything went like a dream for a while, then she started to do some weird things. Then she started the blue screen - Bios loop, in camera. By trial and error, I find that it will run with 1 GB, Ok, (but slow as the 1 GB is used facing upwards). Whenever I try to use the 2nd go. It's the blue screen - Bios loop, in camera.

  I want to get the 2 GB of Ram in. Can someone help me?

  Since Saturday, when, when I posted the Codes to stop, I have re-installed the 2 GB of Ram, to check the Codes to stop with the two GB of ram.

  For reason unbeknownst to me has been operational since the PC without any problem.

  Thanks wb2001 & dax1792 for your time.

  Trevor

• An Android apps runs with Z10 and Simulator, but does not start woth Q10

  My worn for Android application works very well with Blackberry 10 Simulator, my housing on the portal is rejected but the application does not launch with Q10, works however with Z10.

  I checked my code for all uncaught operators who may cause a failure to start, but could not find.

  Do you have ideas on why an application running with Z10 or Simulator would not start with Q10?

  Thank you, imre.

  The size of the screen was really the question. I put Blackberry 720 x 720 for the emulator, the repeated problem, and I fixed it.

  It's all good now!

• Integration of the java code BlackBerry with Phonegap.

  Hi all

  I don't know if I have a good question, as I'm new to development Phonegap, not knowing anything about it.

  I want to know how integrate us the BlackBerry with Phonegap code java code, in particular, how a screen be pushed using the code Phonegap? Give me a solution, thanq.

  Hello

  Getting started guides for cordova (on which is based the PhoneGap project) can be found here:

  http://docs.PhoneGap.com/en/2.4.0/guide_getting-started_blackberry_index.MD.html#getting%20Started%2...

  Here are the docs for the creation of plugins based on Java for BBOS (versions 5-7).

  http://docs.PhoneGap.com/en/2.4.0/guide_plugin-development_blackberry_index.MD.html#developing%20A%2...

  For most applications, there is no need to develop plugins with Java. Your screens should be based on HTML and JavaScript.

  Keep in mind the benefit of using cordova is to target multiple platforms (BBOS, 10 BlackBerry, iOS, android and others). You always need to install SDK BlackBerry WebWorks.

  I hope this helps.

• printer hp photosmart 7345 has not run with Windows 7 Professional 64 bit

  Our range of printers hp photosmart 7345 has work perfectly with Windows XP Professional 32-bit, but he has not run with Windows 7 Professional 64 bit. Please could you tell us who should be used?

  Hello

  HP Photosmart 7345 is compatible with Windows 7.

  Download the drivers for your printer from the below mentioned link and check if it helps.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=213999&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=213997

  
  Contact HP support for further assistance.
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

• How to include Reactjs with Phonegap?

  I'm new to Phonegap so I installed the desktop Phonegap app, created a project etc.

  This all works fine with updates in real time on a device.

  Now I want to include Reactjs with es2015 babel using webpack as I would normally,

  but I have no idea how merge these into the startup project I created with Phonegap desktop application.

  Build you just like you normally put your generated file (bundle.js) in the root level www directory and reference in your index.html.

  You can also try to use a template to get started. Something like phonegap-model-react-hot-loader

• Questions, getting started with Phonegap Adobe

  Hello

  I am really new to app relatively new building for java programming, but have a little knowledge in html and css.

  I managed to create a html, css, js page and tested with Phonegap Adobe.

  Issues related to the:

  1. what I need to integrate and use cordova-plugins when you build the application or the application may be just a file html, css and js?

  2. when I created all the resolutions for different devices, how will I be able to implement different html, css, js files for the different devices?

  3 do I have an Apple pc, when you create an application with Phonegap Adobe iOS to iOS devices, or I can build in an environment windows for all devices?

  4. What are the benefits to register, an Adobe Phonegap account?

  1. the app can be just a html, css and js folder except the splashscreen plugin (and the statusbar plugin, if you want to scale well on iPad). In addition, you need graphic icons and screens start and of course a config.xml file with the configuration name and id, icons/projections and a couple of general preferences

  See the Build Phonegap Docs

  PhoneGap Build | PhoneGap Docs

  2. you do not implement 'dimensions' for all devices. Similar to Web design (where you really don't know what size the user opens and will scale to the browser) you just create something in "liquid design", which is supposed to evolve with the different screen sizes and resolutions.

  Also, make sure you look a bit on the html element meta for 'window'

  3. you can build in Windows, iOS, or Linux (or any other OS) when using Phonegap Build. However, iOS apps cannot be published if you have a Mac (whether physical or in the cloud)

  4. the benefits are that you can have several apps at the same time in your account, and the size of each max is more important than in a free account. The benefits of Adobe are obvious: they get your money.

• How to get IMEI number with phonegap app by using Javascript?

  Hello

  I suffer on this the last 2 days to get the IMEI number in phonegap app by using javascript.

  I found all things related to Phonegap with Android, but I want to get the IMEI number with phonegap app by using javascript/JQuery according to requirement.

  Could you please give me the process step by step to get the IMEI number with phonegap app with javascript/JQuery?

  Thanks in advance.

  Thank you

  Jayaram

  You can use the cordova-plugin-device plugin for a UUID of the device (this api is the same on iOS, Android,...)

  This isn't exactly the same as the IMEI, but it is unique enough to identify the device, while protecting the privacy of the owner of the phone.

  If you need to get the IMEI, then google is your friend. This [1] was the first result when searching for "imei cordova.

  There's a good stack overflow article here [2] which has the disadvantage of using this value and encourage you to consider other ways to identify users, because users cannot trust your application if you ask for this info. Read the accepted answer.

  [1] GitHub - aquto/cordova-plugin-imei

  [2] http://stackoverflow.com/questions/1972381/how-to-get-the-devices-imei-esn-programmaticall y-android

• Hi, I'm running with a student cancelled subription but the first run in trial mode. What can I do?

  Hi, I'm running with a student cancelled subription but the first run in trial mode. What can I do?

  Please check, if you subscribe to the CC English language only membership?

  Change the default language of the installation for English.

  And try to activate the product, as previously mentioned.

  For more information, please visit this link:

  Adobe Creative products Cloud launch mode test on non-English operating systems

  Thank you