Annex reoccurance of workflow that is part of the main workflow.

Similar Questions

• Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found

  Windows appear on the taskbar, but won't focus, other 3 goes, only 1 that seems to be the main window is not found

  ALT + tab select window; ALT + SPACEBAR; maximize; sigh

• I want to know how to crop a letter in a clipping mask, so that certain parts of the letter are cut out of the bounding box

  letter in the bounding box of culture?

  I have a box of 15 x 15 cm. I have my only inside typed letter.
  I want to clip the letter to the limits of the box so that if I change its scale, part of the letter is cropped to where are the limits of the area.

  I must do this for an assignment.

  Thank you!

  And the R is black or another color?

  The letter must be below the box. Use the layers panel to make sure the letter is below the box. Select both, menu items, clipping, Make.

  If this does not work for you, please post a screenshot showing the Panel layers with extended layers of screen.

• Standard report that provides details of the main category

  Dear,
  
  There are standard report that gives details of the asset (not minor) category which give us total of the net book value of depreciation and the cost of all this major miners.
  
  Thanks in advance

  Try this report.

  Ixr: Capital Book

  Only give broad category and other required details and try to run it. We could help.

  Tarun

• Help the action of the button to open a file that is attached to the main pdf doc

  Hello

  I created a button and used an icon saying "click here...". "the action I want to join him, is having on the mouse down to open the file that is attached to the document.

  Is this possible?  If so, how direct the acton "open a file" to be laid down in the document?  path can not understand...

  He had an idea of how to make a javascript button action to open the fixing Panel...

  That's what was written... and then below that is my question about what was written...

  Thomp wrote:

  Try thisif (app.viewerVersion < 8)
  app.execMenuItem (...);
  on the other
  app.execMenuItem (...);

  What would go in the "(...)" above?

  
  I am very poor in javascript, but I'm guessing that there is something that I need to fill? Am I wrong?
  Thank you...
  I, too, am trying to get my button action to open the attached document in my form pdf - NOT the navigation panel... I've already done this...

  Thanks again for all your comments!

  Hi sicilianmissy65,

  Try this.  Attach the file you want to open in your main PDF.  Now, to add a button and in the dialog box properties on the Actions tab, select go to a Page view and click the Add button.  A small dialog box will appear to the top heading create go to View - don't do anything with it yet.  Now, double-click the attached PDF file to open it.  Now click the set link in this dialog box.  In the main dialog box, you should now see in the action area-

  Navigate to a Page in another document

  Attachment file:PDF

  Hope this helps,

  Dimitri

  www.pdfscripting.com

  www.windjack.com

• a switch that is part of the battery will charge if it loses connectivity to the master?

  If I have 4 switches configured as a stack - where the StackWise ports are connected within 1 to 2, 2 to 3, 3 to 4 and 4-1. Switch1 is the master.

  If something were to break stack connectivity between 4 to 1 battery still works as switch 4 still has connectivity to control through 3 to 2 to 1.

  Below the output of reference-

  switch #show switch retail
  Switch/battery Mac address: 0023.34b3.5600
  Current H/W
  Switch # Mac address priority Version State role
  ----------------------------------------------------------
  * 1 master 0023.34b3.5600 15 0 loan
  0023.0543.aa00 member 2 14 0 loan
  3037.a6ca.2000 member 3 13 0 loan
  3037.a6ca.6900 Member 4 12 0 loan

  Battery nearby Status port
  # 1 Port 2 Port 1 Port 2 Port switch
  --------------------------------------------------------
  1 low ok 2 none
  2 ok Ok 3 1
  3 ok Ok 4 2
  4 bottom Ok No 3

  switch #.

  With this as the current state 2 reload automatically cause the 3 and 4 to charge because they lose connectivity to control completely or they will stay up as of the individual switches

  And same question again - switch 3 cause reloading will rise 4 to recharge automatically as he lost connectivity to control completely?

  I've seen this happen... so need to confirm if what is expected or we must check and solve another question that might have caused this!

  This is not the expected behavior. A member of the battery is disconnected does not cause other switches to restart. They work as individual switches.

  Cisco documentation:

  An active switch connected to a fully operational
  stack becomes member of the stack. It receives the functioning
  setting up the master of battery
  . When you disconnect a battery Member
  Uh, numbers and port switch
  numbers of the remaining members of the battery
  no change and the switches do not recharge.

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst3750/software/...

• What is KB967723 security update for Windows Vista (KB967723) (that's part of the history of the update from Windows Update)

  There were 68 'important' or 'recommended' updates automatically installed since 03/09/09. What concerns me, is the amount of disk space I'm dedicated to these updates.  Replace the previous updates or are they cumulative? How do I know what to do these updates and their size?

  myrmur,

  You can find the details about the particular update you want from http://www.microsoft.com/downloads/details.aspx?familyid=7d72f845-9feb-4685-a669-f9d6ab54f9ed&displaylang=en

  Simply enter the number in the search box and you will get the details about the update.

  Various updates are of different size. You can check if you need all of the updates and install only those you think necessary. If you are not sure about this, you can go ahead and install the important updates!

  Let us know if this has been helpful!

  See you soon!

• Windows Media Player (32-bit Vista) has stopped working. It does not open when I click on a file that uses or from the main menu. I tried to download and re - install, but get the message "you already have the latest version of Windows Media Player.

  Windows Media Player does not work for music or videos (Vista)

  Hi Palmdoc,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  You cannot uninstall and reinstall Windows media player in Windows vista, because it is integrated inside the operating system.

  This problem occurs because the Windows Media Player library database is corrupted.

  See the below Microsoft article and try the steps mentioned, check if it works.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When registering downloaded as part of the name of the files is saved and there is no file with the name name extension.

  I GET MY MAIL MOBILE. ME AND SINCE THE TWO LAST updates TO FIREFOX, I GOT THIS PROBLEM.
  THE FULL NAME AND THE EXTENSION WILL APPEAR IN THE BOX, BUT WHEN I SAVE THE FILE ON THE ONLY DISK THAT A PART OF THE NAME APPEARS WITHOUT EXTENSION.

  I GET MY MAIL FROM MOBILEME SITE FIREFOX LATEST VERSION.

  AS OF MARCH 14,2011 AT 06:50 IT IS NOT RESOLVED.

  Try putting quotes around the whole file name before you save it.

   "file name.mp3" 
  

• I have Adobe Acrobat 9 Pro Extender. When I try to convert a Word file to PDF that says that it cannot find the drivers from the Adobe PDF printer and reinstall Adobe Acrobat 9.0. In addition, when I open just the program Acrobat 9 Pro Extender an error m

  I have Adobe Acrobat 9 Pro Extender. When I try to convert a Word file to PDF that says that it cannot find the drivers from the Adobe PDF printer and reinstall Adobe Acrobat 9.0. In addition, when I open just the program Acrobat 9 Pro Extender an error message comes up saying that a part of the Capture 3D plugin has been damaged. I went to customer service and they sent me here. Please tell me that this is not another race. I'm running out of patience! I have 10 window.

  Acrobat 9 is quite old and not longer supported. The last Windows OS that could use Acrobat 9 has Windows 7 and Acrobat had to have all updates applied.

  You need to upgrade to Acrobat DC.

• File recorded incorrectly and parts of the image are missing

  I was working in Photoshop CC and saved that I made changes.  I have added teeth, skull, the eyes and recorded.  No problems.  I added the background and not registered, no problem.  I added the flame and saved... photo is destroyed.  When I clicked saved it changed the image and now the bottom is that partially, the flames have missing parts, the dog has missing pieces and my picture once done for a class assignment is destroyed.  If there is a solution, please help me.  Otherwise I'll have to go back and redo everything.  Which waste far too much time because I have 3 other assignments to do and who does not understand to make posts on the site of the student and watching the video tutorials for other assignments.

  Here is the version incorrectly saved as a png image of the image that it was recorded so wrong what he was:

  

  Help, please!

  Julie S.

  Please see file saved incorrectly and that some parts of the image are missing

  (Double Post)

• How to configure the zxp so that he will place the related files for the Panel in one specific folder other than the folder "C:\Program Files (x 86) \Common files \Adobe\CEPServiceManager4\extensions\ ' usual?

  Hello

  I'm working on a Panel for Adobe Premiere pro CC, now we have a group set on foot which will install all the files that are part of the Extension and associated content files folder in the

  Folder C:\Program Files (x 86) \Common files \Adobe\CEPServiceManager4\extensions \Panel\CONFIG. But we have to change this location to C:\Users\USER\APPDATA or any other folder specified for the user during the installation itself.

  Is it possible to do Builder extension?

  Thank you and best regards,

  Anoop NR

  Thanks guys,.

  I have it! Extensions of the hybrid.

  I use Adobe Extension builder 3 in Eclipse to code and create the zxp for Premiere pro panel.

  See the hybrid extension HTML panels advice part: #10 packages / installers ZXP | Photoshop, etc I added a hybrid extension using the manifest editor Panel within the extension Builder. It creates an automatically mxi file with all the properties, I have to change the maximum version number of host in the mxi file to make the extension in the first pro CC 2014. Using the hybrid option in the Bundle manifest editor you can choose a set of folder paths to put the files during the installation itself and can be used later using "csInterface.getSystemPath (SystemPath.CODE)" of javascript functions to edit.

  Thanks for your relpies,

  Anoop NR

• InDesign display only part of the image

  I do work for a client in InDesign CS5. I haven't worked in before CS5, so don't know if this is a bug or if I'm doing something wrong.

  It seems to happen randomly and I checked the preferences and tried using different settings for display performance. I even tried the work of viewing with preview of overprinting on.

  Where to place the images that a part of the image shows. When I convert them to PDF or print the file, and then displays the entire image. This makes it very difficult to make the layouts, especially in cases where I need to crop an image.

  In InDesign, it looks like this:

  

  When I convert them to PDF format (it is a low resolution output, just to demonstrate my point) the entire picture shows:

  

  In InDesign, it looks like this:

  

  When I convert them to PDF:

  

  The machine I'm ding this work on is an iMac, 2.66 GHz Intel Core 2 Duo with 4 GB 800 MHZ DDR2 SDRAM. It runs Mac OS x 10.6.4. And InDesign version 7.0.2.

  This is definitely not normal and not a bug, but something on your system or configuration. If Eugene'ssuggestion does not work, try http://forums.adobe.com/thread/526990

• DataPump export part of the table

  Hello
  
  I have the pattern, where I ca. 100 tables and two large tables, with hundreds of millions of records. I want to export the schema with restriction on this two tables with data pump so that only part of the data is exported as custom where condition. Is this possible with expdp?
  I have hard to create the new table in the contours with my selection of data from large tables and then exclude the original paintings using the option EXCLUDE, however it seems to me a waste of resources and time on the server. Welcomes all ideas, thank you!
  
  Published by: kamilp on October 5, 2009 07:25

  Hello

  Yes, just use the query clause and specify a table name:

  Lets say, you want to get everything from the last 10 days of the big table 1

  Anais = large_table_1: ' date_column > sysdate-10.

  If you want to get everything with part_number more than 1000 for large table 2

  Query = large_table_2 "part_number > 1000.

  Use this solution in the export command

  expdp System/Manager schemas directory of my_schema = dpump_dir = my_schema.dmp charly dumpfile = large_table_1: ' date_column > sysdate-10 "query = large_table_2"part_number > 1000.

  Dean

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.