Another: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183 but on XP Pro

Similar Questions

• V2v error a server using Vmware Converter has FAILED: cannot create a snapshot VSS of the source volumes. Error code: 109 (0x0000006D)

  I have the above, when you try to v2v, a server or ESXi server as a workstation or a HARD drive.  I have a lot of space on the disk being cloned to, everyone had this before, can you please provide a resolution? #

  Thank you

  Chris

  Looks like what ive solved this now.  Ive disabled SQL VSS Writter and a product called Neverfail (we use to DR our servers).  Since ive done this im now able to create snapshots and images begin to generate.

• VCB error: failed to create a snapshot suspended because the snapshot creation operation has timed out for holding off the coast of I/O in the frozen VM

  Hi all, I have a problem, creating a model by cloning the Live VM for Windows Server 2003 x 64 Standard edition and in fact it happens on my own install Windows Server 2008 R2 Enterprise x 64 as well?

  Here is the error message:

  Creating snapshot of the Virtual Machine

  * _Cannot

  create a suspended because the create snapshot snapshot operation

  timed for the outfit out of e/s in virtual jelly

  machine._*

  I installed the VMWare tools and make sure that the VSS service are all on but he failed.

  any help in this matter would be greatly appreciated.

  Thank you.

  Kind regards

  AWT

  Check out my Guide to proven practices VCB on the VI:OPS website-> http://viops.vmware.com/home/docs/DOC-1392

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• «FAILED: failed to create a snapshot of the source volumes VSS.» Error code: 2147754758 (0 x 80042306). "Down to 1% with autonomous converted 5.5

  Hi all

  I'm trying to convert a physical Windows 2008 R2 (SP1) virtual, using Vmware vCenter Converter Standalone version 5.5 build 1362012, it fails at 1% (after around 40mins) with the following message

  Failed: Failed to create a snapshot VSS of the source volumes. Error code:
  

  2147754758 (0 x 80042306).

  
  

  Windows systems has some LUN (4 x each various size GB) San, being the GUID (GPT) Partition Table.  I went through the wizard as a general rule, by selecting "edited on the machine", a player selected vmware "vmware workstation" or another vmware virtual machine destination 6.0.x and the location of the target being a LUN with 500 GB of space.

  Now for the data to be copied I selected 3 LUN (on a database resides) and put the 'Size' option (but I tried to keep the size of the various passes) to save space.

  
  

  Looking through the logs, I see the following errors

  Server-convert-VMware - 1.log

  2014 01-16 T 19: 42:37.371 - 07:00 [info 08696 'Default'] [serviceWin32, 416] Server vmware-converter service started

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 42:51.006 - 07:00 [08696 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 42:51.115 - 07:00 [info 08696 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] username [ADS] Get failed: 1332

  2014 01-16 T 19: 43:38.898 - 07:00 [10116 info "Libs"] [ADS] subtle failed: 1312

  2014 01-16 T 19: 43:39.023 - 07:00 [info 10116 'Default'] [user, 874] successfully authenticated the user administrator of the local computer (by using pipe)

  2014 01-16 T 19: 43:39.647 - 07:00 [info 07628 "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 44:26.152 - 07:00 [08696 error 'Ufa.HTTPService'] cannot read the request; flow: io_obj p:0x0141b84c, h:-1, < tube "\\.\pipe\vmware-converter-server-soap" >, < pipe "\\.\pipe\vmware-converter-server-soap" > >, error: class Vmacore::TimeoutException (operation timed out)

  2014 01-16 T 19: 47:32.

  Worker-converter-VMware - 1.log

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors when reading partition table

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] disk number 1 has been ignored due to errors during playback of dynamic disks header or LDM database is corrupt

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [MoveActiveDiskIfNeeded] GetFirstBootDisk failed, error mntapi: 176

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] score: Invalid magic number sector.

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 'Default'] [PopulateCapabilities] based on the Volume of cloning has been disabled due to: no volume is recognized >

  ..

  2014 01-16 T 19: 47:34.323 - 07:00 [warning 07248 "Default"] Partition: ERROR: MBR sector must be present and valid initialize to GPT disk.

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 'Default'] signature of disk found 80a2884a-05e9-4c1b-81-3d-35-1b-a3-6c-4b-bc, drive to 225981112, sectors 512 sector size size

  2014 01-16 T 19: 47:34.354 - 07:00 [info 07248 "Default"] Partition found type Efi system / single 4078aaff-430e-4825-bf-07-67-c6-ab-a1-87-3f

  ...

  2014 01-16 T 19: 47:37.365 - 07:00 [info 07596 "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:37.412 - 07:00 [10164 info "ThreadPool"] Thread has enlisted

  2014 01-16 T 19: 47:37.459 - 07:00 [info 07696 "Default"] MNTAPI: mounted volume \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.584 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.677 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.755 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.849 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:37.942 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.052 - 07:00 [info 07696 "Default"] error 0 when calling GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS: <>

  2014 01-16 T 19: 47:38.098 - 07:00 [10164 info "ThreadPool"] wire removed from the list

  2014 01-16 T 19: 47:38.098 - 07:00 [info 03736 "ThreadPool"] Thread has enlisted

  I wonder if the converter is not able to work on the GPT partitions?  (I think I saw some discussion of the community on this problem using v.5.1, but using 5.5 should be resolved?)

  Any help is appreciated. Thank you

  Your problem is with VSS, it is probably the lack of space, to seek solutions and similar problems.

  Errors that you see are expected, we need a full newspaper bundle for investigation and don't warry on GPT disks, they are supported with converter 5 +.

• More about "ERROR: failed to create a snapshot of a volume of the source.

  I saw the previous posts on this and have tried to follow all the advice, but nothing helped.  I am running XP and you have two hard drives, NTFS and both have plenty of space.  My destination is an external hard drive, FAT32, with plenty of room.  I get the ERROR message: failed to create a snapshot of a volume of the source. Ppossible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough of disk space.

  I installed the converter as an administrator, I rebooted several times, I ran / f checkdsk on both hard drives and external drives, I have disabled all the services that I am uncomfortable, turn off, but just, I get this message.  I have attached the log file.

  Thanks for any help.

  drbking wrote:

  I see that a small part of my answer was missing - the microsoft running thing, I found I was missing vssui.dll.  Downloaded, ran the microsoft thing and am now running the converter again.  Know in the morning, if it works (takes about 9 hours).

  How is the conversion?

  -Ryan

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• Boot Camp install fails: cannot create the partition

  512SSD i7 MacBook Pro late 2013

  Boot Camp Assistant 6.0

  O/S 10.11.2

  true (paid for!) Windows 10 home

  Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming)

  Re-partition Mac SSD in Colombia-British Deputy with 60 GB for windows partition

  Restart the system and boot of Windows Setup

  Enter the key to victory, everything works fine

  When you choose which partition to install windows, select 60 GB

  Installer of Win said partition is not formatted correctly, so I use the formatting tool in the installer

  Formatting tool seems to work but removes the volume name: it was Boot Camp and becomes Untitled

  60 GB re partition - select an installer says "failed to create the partition" or something similar

  Installer refuses to go forward and the only way out is to leave the Setup program

  Mac to Mac o/s boots

  Tried a couple of times and always the same result.

  Someone has an idea what I am doing wrong? I'm just following the instructions of the Boot Camp Assistant...

  This is the case, if you have any other than the USB storage and storage internal connected.

• Failed to create a snapshot with 2 TB of virtual disk?

  I have a virtual file server with a 2 TB virtual disk (vmdk).  When I try to create a snapshot of the system (to save), I get the following error:

  < Unspecified file name > file is larger than the maximum size supported by the data store ' < unspecified datastore >.

  The data store located on the file server is formatted with 5.54 VMFS with size of 1 MB.  It's a data store of 12 TB with about 6 TB free.

  That is right.  If you want to take a snapshot, then the maximum size is GB 2032.   And this is the case even if thin you load the disc.

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• Is impossible to turn on the guest account. Cannot create new user account. "The service user profile Service has no logon. User profile cannot be loaded. »

  Is impossible to turn on the guest account.  Cannot create new user account.  After to try one of those and reboot, the icons of account appear, but when you try to use, the following instructions of error present when you try to log in with the new account or comments: "the user profile Service service has no logon.  User profile cannot be loaded. "I looked at the answers to all the previous ones (including the KB947215) and no not to address specifically.  For the most part, they seem to assume that there is a guest or a new profile in the first place...

  The system is Win 7 Pro 64-bit with all available updates.  I can't say when the last time that the guest account has worked (rarely used) and just found out I can't do new additional user, accounts trying to solve the problem of account of comments... so I have not tried to enter Safe Mode and do a system restore , because I can't yet identify a useful restore point...

  There are no entries in the registry for a guest or a new standard user account.  The registry entries for the three accounts normal-quickly (2 x admin, 1 x level) seem to be appropriate.  Watch register computer/HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  S-1-5-18 = system profile

  19 = local service,

  20 = network service,

  21 long numbers + 1004 plus User1 (admin),

  22 long + 1005 plus 2 user (admin),

  23 plus long + 1006 is user3 (standard,

  and no comments or additional profiles appear.

  C:\Users includes

  All users,

  User1,

  User3,

  By default,.

  Default user (which is inaccessible for me, even as an administrator),

  Public,

  User2,

  No guest or additional profile appear.

  All except the default user (I can't open) seem to have the appropriate, NTUser.DAT files although I don't know how to check for corruption.  Having both a default value

  and a default user folder seems hokey.

  I think I understand instructions how to fix or remove a corrupted profile, but that does not apply to the guest account or profiles that do not exist.

  Help?  Ideas?

  This message contains the strange solution.

  [Plan B - I found one thread where one user said that the same symptoms of the problem that you experience this problem solved]

  - - - - - - - - - - -

  Plan h - while another user said that it was caused by a file Windows Live problem

  This is the thread I can not create a new user account (Windows 7): the user profile service service doesn't have the logon

  You find it difficult to follow the thread as it's long and reported problem by different people to confuse it and there is also a bit of bickering [long filaments often end up being quite incomprehensible].

  ..., See references to the event viewer in the middle of page 4 and Windows Live we [at the bottom of page 2 more on page 3].

  I see not the logic of the any of those things, but if one of them do things long enough that you are trying to create new accounts that works, you will know how in the future until a proper solution is found.

  This is the useful part where this user has tested the solutions proposed in this thread linked above: -.

  This has proved to contain leads to a difficulty.  Have to admit, when I read everything the first time, several days, I did indeed find it confusing and even the parts that I "heard" (sorta) does not appear to be related to my symptoms.

  It turns out that the answer of JDMICHAL May 17, 2011 contained this:

  (1) C:\Users\Default\AppData\Local\Microsoft\Windows open live
  (2) this directory has two subdirectories with a single file of each. Go into each directory and apply the following:
  (a) make a right click on the file, open the properties.
  (b) click the Security tab.
  (c) it will issue a message: "to continue, you must be an administrative user with permission to view this object's security properties. Would continue you? ». Click on the button continue.
  (d) click on the Add button...
  (e) ' everyone' type in the box at the bottom of the dialog box. Click on "check names"; It should be emphasized the "everyone". Click OK.
  (f) ensure that the new "Everyone" entry "read" and "read & run" check under the column "allow".

  After doing this for two files, attempt to connect to the account. He must undergo.

  The procedure (bascially) worked... Although the different answers on my system differed slightly along the way (perhaps due to the slightly different versions of Win 7?, because I was already logged in as an administrator?).

  In any case, "Everyone" with the read and read/execute permissions adding to these two files seems to have done the trick:

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\Bici1_00.sqm

  and

  C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm

  Thank you for leading me to this!

• Running IE8 on Vista Home Premium.I cannot create a backup to restore the system.

  The error is 0x800423F3. A snapshot could not be created for the following reason, that the writer has encountered an error transitional 0x800423F3. The instructions you sent seem to be for Windows7. I was able to stop WMI (a warning appears saying that this action would have an impact on the Security Center, ForceWare IP and IP Helper service. In any case, I still get the same problem. "A snapshot could not be created. Teh writer has encountered a transient error...

  Hi tedfms,

  You can try the following steps to see if it helps with your problem at all:
  It is a solution that has worked for others with the lapse of the well-known writer, 0x800423F3. He has contributed to: WAW8

  Try the following:

  
  1) start the computer in Mode safe mode without network.
  
  2) open an administrator command prompt
  
  3) type "net stop winmgmt" without the quotes and press ENTER to make sure that the WindowsManagementInstrumentation (WMI) service is not working.
  
  4) go to the windows\system32\WBEM\ and rename the drop folder.
  
  5) reboot and restart normally
  
  6) open an administrator command prompt.
  
  7) type "net stop winmgmt" without the quotes and press ENTER to stop the wmi service.
  
  8) type winmgmt /resetRepository and restart the system.
  I hope this helps.

• Failed to create a system image on the computer sony notebook using windows vista professional

  Have tried without success to make an image of a computer system sony vaio notebook to an external Seagate USB drive.  Backup shows underway for hours, then the white of the screen and laptop computer crashes.  Windows Vista business operating system. Have attempted to create an image using Novabackup, it represents a step forward, but when he reached the point of jumping "pagefile.sys and hiberfil.sys" after a few minutes he blocks as well.  Only solution is to turn off.  Data backup jobs.  Run a complete check of the disk. Any suggestions?

  Hello

  check this link for the same issue:

  http://www.SevenForums.com/performance-maintenance/39188-cannot-create-system-image-backup-computer.html

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/cannot-create-system-image-on-64GB-USB-flash-drive/496c26c8-13E7-4CAE-914F-039a7a4d6074

  http://social.Microsoft.com/forums/en/offtopic/thread/91b5c020-8d78-4427-9f68-0c39374155a0

  It will be useful.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• Cannot create a .db file in the assets folder

  I am trying to create a quizz.db file in the current folder by creating first a temporary quizz.db in the folder data and then creating tables inside and then copy it in the current folder. By debugging code, it shows that the folder is created. But I can't find it in the current folder. Here is the code

  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace bb::data;
  
  SQLTest::SQLTest(bb::cascades::Application *app): QObject(app)
  {
      const QString fileName = QString("quizz.db");
      QString dataFolder = QDir::homePath();
      QString newFileName = dataFolder + "/" + fileName;
      QTemporaryFile file(newFileName);
  
      // Open the file that was created
      if (file.open())
      {
          // Create an SqlDataAccess object
          SqlDataAccess sda(newFileName);
  
          // Create a table called Employee in the database file
          sda.execute("CREATE TABLE Employee( firstName VARCHAR(50),lastName VARCHAR(50), salary INT);");
  
          // Insert employee records into the table
          sda.execute("INSERT INTO Employee (firstName, lastName, salary) VALUES (\"Mike\", \"Chepesky\", 42000);");
          sda.execute("INSERT INTO Employee (firstName, lastName, salary) VALUES (\"Westlee\", \"Barichak\", 55000);");
          sda.execute("INSERT INTO Employee (firstName, lastName, salary) VALUES (\"Ian\", \"Dundas\", 47000);");
          if(sda.hasError())
          {
  
          }
          else
              copyFileToAssetsFolder("quizz.db");
      }
  }
  void SQLTest::copyFileToAssetsFolder(const QString fileName)
  {
      QString appFolder(QDir::homePath());
      appFolder.chop(4);
      QString originalFileName = appFolder + "app/native/assets/" + fileName;
      QFile newFile(originalFileName);
  // If I enable this `if` condition the code satisfies it and removes the quizz.db file and then it satisfies the next `if` condition and successfully copies the quizz.db file from `data` folder to `assets` folder.
      /*if(newFile.exists())
          QDir().remove(originalFileName);*/
      // this `if` condition is not satisfied. Which should mean the quizz.db file has been created on assets folder.
      if (!newFile.exists())
      {
          // If the file is not already in the assets folder, we copy it from the
          // data folder (read and write) to the assets folder (read only).
  
          QString dataFolder = QDir::homePath();
          QString newFileName = dataFolder + "/" + fileName;
          QFile originalFile(newFileName);
  
          if (originalFile.exists())
          {
              // Create sub folders if any creates the SQL folder for a file path like e.g. sql/quotesdb
              QFileInfo fileInfo(originalFileName);
              QDir().mkpath (fileInfo.dir().path());
  
              if(!originalFile.copy(originalFileName)) {
                  qDebug() << "Failed to copy file to path: " << originalFileName;
              }
          } else {
              qDebug() << "Failed to copy file data base file does not exists.";
          }
      }
  
     // mSourceInDataFolder = newFileName;
  }
  

  If activate the commented "If" condition of "copyFileToAssetsFolder" int he removes already created quizz.db file in the current folder (that Im unable to find) and goes inside the next ' if' and copy the quizz.db created on the folder "data" of active fodler. But in any case I don't find the quizz.db in the current folder. I really need help with this quickly. Thank you.

  Thanks to read this to learn why you can have an application change the assets folder: https://developer.blackberry.com/native/documentation/bb10/com.qnx.doc.native_sdk.devguide/com.qnx.d...

• Cannot create a PDF file after the upgrades: Adobe 9.2 and Mac OS 10.6.2

  After the upgrade to Adobe Professional 9.2 and Mac 10.6.2 I lost the ability to create PDF files.

  The printer Adobe (display says that the printer is v. 9.0) indicates the status of the job as "Mistake" and has the following message; "You must install the software to use this printer. To install the software, choose software update from the Apple menu. If the software for your printer is not available in software update, contact the manufacturer of your printer. »

  I get errors when I try to create a PDF from a Web page.

  I get the following error when I try to create a pdf from a word file: "Acrobat cannot open 'AAA.docx' because it is not a type of supported file or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  To create an Adobe PDF document, go to the source application. Then print the document in Adobe PDF format".

  (I can create a PDF from jpg files... but I never really have a need to do this...)

  I uninstalled Adobe Professional by using the uninstall program (then emptied the trash and restart), then reinstalled Adobe Professional from disk (and restarted).  After the reinstallation, I always get the same problems, even if I get no error message until Adobe Professional updates from 9.0 to 9.2.  Before the upgrade Adobe, v9.0 attempts to print to pdf just act as the pdf is created (no error message), but I do not get a backup fast, nor is a new pdf no matter where the document is located.

  Help, please!

  With OSX.6.x, the possibility of using the Adobe PDF printer has been lost. See the ad at the top of this forum (known issues with Snow Leopard).