Another problem with AutoText

Similar Questions

• manage the z-index property in the chrome browser (was: is there another problem with Chrome?)

  Hello

  I wonder is there another problem with Edge and Chrome.

  I know that something got sorted out but now I have a problem with rectangles (such as the hitboxes) not appearing is not in Chrome.

  Anyone know why this is happening?

  Hi Robyn,

  Looks like a problem with chrome. He is not able to manage the z-index property (although set) in this case. Due to which the user is not able to click on the button that is hidden by another element.

  There is a workaround solution you can do on board animate:

  You simply select the item named "s_cpl_fa_nav_x2" in the Panel edge ' Elements' animate and drag just below the element named "s_cpl_fa_0_guide_page1" and delete the selected item. This will place the first below the latter, with regard to the stacking order of the UI, and so the click event will work.

  I hope this works.

• Perhaps another problem with Css

  I think this is another problem with my CSS is applied because of a problem but I have really no idea.

  The site is Alliance of injuries. The problem is with the images in the middle of the page. They are supposed to be in three rows of 3-3-2, but for some reason some they just below the other. When I click on Home.css in the "View Source", it is titled 'Page not found' don't know why.

  Anyone who has any ideas I would appreciate it.

  Brad

  First thing - you must stop using filenames with spaces in them.  That can get you into trouble.  Use only letters, numbers, dash or underscore - nothing else.

  Next thing, the image and CSS links in this page (located at the root of the site) are all (except two) wrong links related document, for example,.

  If the page is already at the root of the site, there is no ".." as possible.  It is sure to cause you problems.  All these links need to be just like this one (which is correct)-
  (although the Home.CSS file does not appear on the server!)
  The reason why your images are displayed in a vertical table is that each of them is contained in a

  container with no specified width (was this width specified in the Home.css file does not exist?).  So that they appear along a horizontal line, you need to specify the width of the div and float tag he left.

• Yet another problem with WRT54G2...

  Well I had on and off problems with my WRT54G2 router, I got it for about 3 months now and recently full of endless problems... No, my problem is when I turn on my PS3, I get a pop-up message on my computer, there is an IP address conflict, I've never had this problem until today... my PS3 has its own IP address... so when I turn on my PS3 I lose connection on my computer... honestly im tired of having problems with the * beep * thing... anyone has a solution?

  Toomanydonuts is right, can be your PS3 and your computer gets the same Ip address of your router, which is causing this problem and this is why you are not able to go online. It's better, you provide a static Ip address to your PS3 and this will solve your problem.

  You can assign a static Ip address on your PS3. IE: 192.168.1.10 subnet mask: 255.255.255.0 default gateway / router: 192.168.1.1 preferred DNS: 4.2.2.2 and auxiliary DNS: 192.168.1.1. Once provide you this static IP address to your PS3 it will solve your problem.

• Another problem with socket: socket does not receive the although it is ready

  Hello!

  I read a lot of discussion about the casings, but I wasn't able to find a working solution:

  I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.

  I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!

  For this I use wap2.

  5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).

  Can you give me a clue what I'm doing wrong?

  This only happens on the device, not in the Simulator!

  That's what I tried:

  -with the help of a DataInputStream (I wasn't able to find a difference)

  -using another overload of. read()

  P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.

• Another problem with a Microsoft Docx. file

  I have a sandisk cruzer, which contains the installation of adobe CS5.5 Master Suite and a docx. [word document] file with the corresponding product code. A few days ago, the program has been deleted from my computer. I was able to copy the configuration of my USB on my computer with no problems. For some reason, I can't copy the docx. file. It loads as if it was copy it, but it found no visible copy. I also tried for the devil of it to remove the file again, it will act as deleting the file is started & completed, but the file is still there. This may be the cause? And, is there a program that can help?

  Hi Kristie,

  It sounds like possibly the file on your SanDisk may have a problem.  Take a look at the article below on the topic of recovering your data:

  http://KB.SanDisk.com/app/answers/detail/A_ID/4985/~/data-recovery-for-memory-cards-and-Flash-drives

  I hope this helps!

• Another problem with sound

  Hi all! As you can see, I have a sound problem. I searched a lot, but not found any solution.

  I do an application 'easy' with native SDK, that play a sound when you press the buttons.

  I used the MMR and DSL, and each of them does not work as I expected it.

  ROR play a sound, as expected, but when I type two or more buttons in a row, it's first time all sounds and then make all the graphics button at the same time.

  Now, I'm trying DSL. I used wave.c example. It is true of work I press the buttons, but its start late (topic after 1 second). If I type a button 2 times with an interval, it is working too much. About 1 second his 'old' cheek and then restarts.

  I found a topic with the same problem here, but there is any solution.

  I hope that my English is not so bad, and hope to see any help here. Thank you.

  OpenAL may be a better fit for your application?

• Another problem with the configuration of Cisco VPN Client access VPN Site2site

  We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site.  JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support.  So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0

  Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.

  CORP netowrk 192.168.1.0

  IP VPN 192.168.12.0 pool

  Colo 10.1.0.0 internal ip address

  Also, here's an example of my config ASA

  : Saved

  :

  ASA Version 8.2 (1)

  !

  hostname lwchsasa

  names of

  name 10.1.0.1 colo

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  backup interface Vlan12

  nameif outside_pri

  security-level 0

  IP 64.20.30.170 255.255.255.248

  !

  interface Vlan12

  nameif backup

  security-level 0

  IP 173.165.159.241 255.255.255.248

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  switchport access vlan 12

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group network NY

  object-network 192.168.100.0 255.255.255.0

  BSRO-3387 tcp service object-group

  port-object eq 3387

  BSRO-3388 tcp service object-group

  port-object eq 3388

  BSRO-3389 tcp service object-group

  EQ port 3389 object

  object-group service tcp OpenAtrium

  port-object eq 8100

  object-group service Proxy tcp

  port-object eq 982

  VOIP10K - 20K udp service object-group

  10000 20000 object-port Beach

  the clientvpn object-group network

  object-network 192.168.12.0 255.255.255.0

  APEX-SSL tcp service object-group

  Description of Apex Dashboard Service

  port-object eq 8586

  object-group network CHS-Colo

  object-network 10.1.0.0 255.255.255.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.1.0 255.255.255.0

  host of the object-Network 64.20.30.170

  object-group service DM_INLINE_SERVICE_1

  the purpose of the ip service

  ICMP service object

  service-object icmp traceroute

  the purpose of the service tcp - udp eq www

  the tcp eq ftp service object

  the purpose of the tcp eq ftp service - data

  the eq sqlnet tcp service object

  EQ-ssh tcp service object

  the purpose of the service udp eq www

  the eq tftp udp service object

  object-group service DM_INLINE_SERVICE_2

  the purpose of the ip service

  ICMP service object

  EQ-ssh tcp service object

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0

  outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq www

  outside_pri_access_in list extended access permit tcp any outside_pri eq https interface

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100

  outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface

  outside_pri_access_in list extended access permit icmp any any echo response

  outside_pri_access_in list extended access permit icmp any any source-quench

  outside_pri_access_in list extended access allow all unreachable icmp

  outside_pri_access_in list extended access permit icmp any one time exceed

  outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586

  levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

  levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0

  outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0

  outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0

  outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0

  Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list

  OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0

  L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  exploitation forest asdm warnings

  record of the rate-limit unlimited level 4

  destination of exports flow inside 192.168.1.1 2055

  timeout-rate flow-export model 1

  Within 1500 MTU

  outside_pri MTU 1500

  backup of MTU 1500

  local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 100 burst-size 5

  ICMP allow any inside

  ICMP allow any outside_pri

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  interface of global (outside_pri) 1

  Global 1 interface (backup)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside_pri) 0-list of access OUTSIDE-NAT0

  backup_nat0_outbound (backup) NAT 0 access list

  static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns

  static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns

  Access-group outside_pri_access_in in the outside_pri interface

  Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1

  Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254

  Timeout xlate 03:00

  Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  the ssh LOCAL console AAA authentication

  http server enable 981

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outside_pri

  http 0.0.0.0 0.0.0.0 backup

  SNMP server group Authentication_Only v3 auth

  SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt connection tcpmss 1200

  monitor SLA 123

  type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri

  Annex ALS life monitor 123 to always start-time now

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto ipsec df - bit clear-df outside_pri

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto outside_pri_map 1 match address outside_pri_1_cryptomap

  card crypto outside_pri_map 1 set pfs

  peer set card crypto outside_pri_map 1 50.75.217.246

  card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5

  card crypto outside_pri_map 2 match address outside_pri_cryptomap

  peer set card crypto outside_pri_map 2 216.59.44.220

  card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  86400 seconds, duration of life card crypto outside_pri_map 2 set security-association

  card crypto outside_pri_map 3 match address outside_pri_cryptomap_1

  peer set card crypto outside_pri_map 3 216.59.44.220

  outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  card crypto outside_pri_map interface outside_pri

  crypto isakmp identity address

  ISAKMP crypto enable outside_pri

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 10

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  !

  track 1 rtr 123 accessibility

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  management-access inside

  dhcpd auto_config outside_pri

  !

  dhcpd address 192.168.1.51 - 192.168.1.245 inside

  dhcpd dns 8.8.8.8 8.8.4.4 interface inside

  rental contract interface 86400 dhcpd inside

  dhcpd field LM inside interface

  dhcpd allow inside

  !

  a basic threat threat detection

  statistical threat detection port

  Statistical threat detection Protocol

  Statistics-list of access threat detection

  a statistical threat detection host number rate 2

  no statistical threat detection tcp-interception

  WebVPN

  port 980

  allow inside

  Select outside_pri

  enable SVC

  attributes of Group Policy DfltGrpPolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  internal GroupPolicy2 group strategy

  attributes of Group Policy GroupPolicy2

  Protocol-tunnel-VPN IPSec svc

  internal levelwingVPN group policy

  attributes of the strategy of group levelwingVPN

  Protocol-tunnel-VPN IPSec svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl

  username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard

  aard attribute username

  VPN-group-policy levelwingVPN

  type of remote access service

  rcossentino 4UpCXRA6T2ysRRdE encrypted password username

  username rcossentino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  bcherok evwBWqKKwrlABAUp encrypted password username

  username bcherok attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username

  rscott username attributes

  VPN-group-policy levelwingVPN

  sryan 47u/nJvfm6kprQDs password encrypted username

  sryan username attributes

  VPN-group-policy levelwingVPN

  type of nas-prompt service

  username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0

  username cbruch attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  apellegrino yy2aM21dV/11h7fR password encrypted username

  username apellegrino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5

  username rtuttle attributes

  VPN-group-policy levelwingVPN

  username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin

  username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0

  username nbrothers attributes

  VPN-group-policy levelwingVPN

  clong z.yb0Oc09oP3/mXV encrypted password username

  clong attributes username

  VPN-group-policy levelwingVPN

  type of remote access service

  username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0

  username attributes finance

  VPN-group-policy levelwingVPN

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  type of remote access service

  IPSec-attributes tunnel-group DefaultL2LGroup

  Disable ISAKMP keepalive

  tunnel-group 50.75.217.246 type ipsec-l2l

  IPSec-attributes tunnel-group 50.75.217.246

  pre-shared-key *.

  Disable ISAKMP keepalive

  type tunnel-group levelwingVPN remote access

  tunnel-group levelwingVPN General-attributes

  address LVCHSVPN pool

  Group Policy - by default-levelwingVPN

  levelwingVPN group of tunnel ipsec-attributes

  pre-shared-key *.

  tunnel-group 216.59.44.221 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.221

  pre-shared-key *.

  tunnel-group 216.59.44.220 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.220

  pre-shared-key *.

  Disable ISAKMP keepalive

  !

  !

  !

  Policy-map global_policy

  !

  context of prompt hostname

  Cryptochecksum:ed7f4451c98151b759d24a7d4387935b

  : end

  Hello

  It seems to me that you've covered most of the things.

  You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel

  outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo

  Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.

  -Jouni

• Another problem with Windows 7

  Hello

  I thought that the customer view was ok in Windows 7, but I encountered a problem. I have 2 factor authentication configured for remote access. I can connect to the infrastructure of the outside view and open a connection on my desktop, but when I enter the user name and password for the virtual machine, I get the error:

  There is no secure connection to the view connection server.

  Try to reconnect...

  This continues to repeat until I click on "Exit Client"

  The customer to display works fine on Win7 inside the corporate LAN (only single-factor authentication required) and I tried various permutations of the firewall settings (including turn it off completely), but it makes no difference.

  I know I'm jumping the gun a bit with Win7, but thought that I report this and ask if anyone had ideas.

  See you soon,.

  Iain

  imclaren,

  Check all versions of your software.  I had this same problem trying to reconnect and found that my security server is not on the same version.  Customer latest is not backward compatible.  Sweat all the servers are running the same version as the client

• Another problem with bluetooth

  I have a new headset to use with my Sony m2, my old helmet (shaped headband) works fine with Skype, the new works of good headphones with all other apps phone call, the music, but nothing when I try to call via Skype credit ect. The icon on the appeal shows no Bluetooth connection? .... Someone at - it help him?

  Haha do not know if this will help anyone else, but I connected my ear via plug jack 3.5 piece, then turned on my helmet, and bluetooth headset succeeded ok ear piece... And connected hehe

• Another problem with Bluetooth x 220?

  My wireless keyboard shortcut seems to leave out the blue tooth in total and didn't give me a wireless 802.11 radio option. I have small blue tooth LED light, but not once have seen options seen bluetooth on my computer or work. Any input would be helpful!

  Hello

  Could you please check if Bluetooth is enabled in the BIOS?

  Press F1 when you start the system to get into the BIOS. On the Security tab, select access port i/o. turn on Bluetooth and check if Bluetooth is displayed in Device Manager. Also, check if you are able to find Bluetooth radios in Device Manager.

  After the back if the problem persists!

  Best regards

  Mithun.

• Another problem with DateField in JDE 4.2.0! ??

  I have a custom date field object. It looks like this:

  [code]
  SerializableAttribute public class CustomDateField extends HorizontalFieldManager {}
  / the field bandwidth custom date * /.
  private int preferredWidth;
  / the field height custom date * /.
  private int preferredHeight;
  / * the date field * /.
  private DateField dateField;
  / * the checkbox field * /.
  private CheckboxField checkboxField;
   
  Private boolean readOnly;
   
  /**
  * Constructs a new custom date field.
  *
  @param date - long
  @param width - int
  @param height - int
  @param police - police
  @param LectureSeule - boolean
  */
  public CustomDateField (long date, int width, int height, are police, Boolean LectureSeule) {}
  Super (Manager.NO_HORIZONTAL_SCROLL);
     
  preferredWidth = width;
  preferredHeight = height;
  readOnly = LectureSeule;
     
  If (! readOnly) {}
  preferredWidth = 100;
  new CheckboxField = checkboxField ("", (date!) = Long.MIN_VALUE)) {}
  protected boolean trackwheelClick (int status, int time) {}
  If (getChecked()) {}
  dateField.setEditable (false);
  } else {}
  dateField.setEditable (true);
  }
  Returns false;
  }
  };
  checkboxField.setFont (do);
  }
     
  dateField = new DateField ("", 0, new SimpleDateFormat ("dd MMM yyyy"), DateField.DATE | ") DrawStyle.HCENTER) {}
  protected boolean trackwheelClick (int status, int time) {}
  If (isEditable()) {}
  If (GETDATE () == Long.MIN_VALUE) {}
  setDate (System.currentTimeMillis ());
  }
  Returns false;
  } else if (! readOnly) {}
  Dialog.Alert ('check the box to change the date!');
  }
  Returns true;
  }
  };
  dateField.setFont (do);
  dateField.setDate (date);
     
  If (readOnly |) (date == long.) MIN_VALUE)) {}
  dateField.setEditable (false);
  }
     
  If (checkboxField! = null) {}
  Add (checkboxField);
  }
  Add (dateField);
  }
   
  public int getPreferredWidth() {}
  preferredWidth return;
  }
   
  public int getPreferredHeight() {}
  return preferredHeight;
  }

  {} public long getDate()
  If (dateField.isEditable () | readOnly) {}
  Return dateField.getDate ();
  }
  Return Long.MIN_VALUE;
  }
   
  }
  [/ code]

  When I check the box, the date has become editable field, but I can just concentrate the subfield of day of the date field. So the only way to change the months or years is to increment the day. Do you have any suggestions? The problem would be the Director of horizontal field (I tried the FlowFieldManager also - without success)? Thank you!

  You have overridden navigationMovement anywhere?

• HP 635 - another problem with BIOS.

  Having failed to learn from the mistake of my previous post and the password protect all laptops to school a little... "dears" put a power on password on a laptop another 635 HP.

  After 3 has no passwords are: disabled system - 97126102

  If you could help once again, it would be much appreciated once again.

  Hello

  Try to enter: 28884124

  Kind regards

  DP - K

• Google Analytics - yet another problem with the tracking code

  My site is: Codyiddings.com

  I put the Script needed both in the "Page Properties" and a random HTML Widget as well. If you look at the source, it's here.

  But I get this message within the GA:

  Status: Tracking not installed

  Last review: November 8, 2015 8:34:59 AM PST

  
  

  I use BusinessCatalyst to host my Web site and I have codyiddings.com as the default URL and the URL associated with GA.

  
  

  Any ideas?
  

  There may be several reasons as domain not verified, please check if all controls are carried out with GA for the domain that you added to your site.

  Thank you

  Sanjit

• Another problem with countdown timer.  Don't know why

  Hi all

  I noticed on my 30 minutes to count down the seconds seem to ignore or hesitate at different intervals.  It seems to work for 30 minutes, but it will be displayed on a GIANT screen and the seconds of the movements is very obvious.  Someone would show me how please correct the code to a total accuracy of the calendar?  Not sure if I should add milliseconds.  (I don't want to show in the timer, just minutes and seconds 00:00.  Thanks in advance.

  Here is the code

  totalTime = 1800;

  Start from 30 minutes

  startTime = getTimer();

  function timer() {}

  timeLeft = (totalTime * 1000)-(getTimer () - startTime);

  seconds = Math.floor (timeLeft/1000);

  minutes = 0;

  While (seconds > 59) {}

  seconds = seconds-60;

  minutes = minutes + 1;

  }

  If (minutes < 10) {}

  minutes = String("0"+minutes);

  }

  If (seconds < 10) {}

  seconds = String ("0" + seconds);

  }

  Time_text. "Text = minutes +": "+ seconds;

  If (timeLeft < = 0) {}

  Time_text. Text = ("00:00");

  _root.gotoAndPlay (11);

  clearInterval (timer1);

  }

  }

  Timer1 = setInterval (timer, 1000);

  You walk a fine line with a 1 second interval.  Increase your sampling rate and you are less likely to ignore a value.  Here is an approach that samples at rate of the file.  Note that 'var' has been addded in many places.  You should always declare your variables without worrying that AS2 allows you to not have to.

  totalTime var = 1800;

  Start from 30 minutes

  startTime = getTimer() var;

  this.onEnterFrame = function() {}

  timeLeft var = (totalTime * 1000)-(getTimer () - startTime);

  var seconds = Math.floor (timeLeft/1000);

  var minutes = Math.floor (seconds/60);

  seconds = seconds % 60;

  If (minutes<10)>
  minutes = String("0"+minutes);
  }

  If (seconds<10)>
  seconds = String ("0" + seconds);
  }

  Time_text. "Text = minutes +": "+ seconds;

  If (timeLeft<=0)>
  delete this.onEnterFrame;
  Time_text. Text = ("00:00");
  _root.gotoAndPlay (11);
  }
  }