Another problem with bluetooth

Similar Questions

• Another problem with Bluetooth x 220?

  My wireless keyboard shortcut seems to leave out the blue tooth in total and didn't give me a wireless 802.11 radio option. I have small blue tooth LED light, but not once have seen options seen bluetooth on my computer or work. Any input would be helpful!

  Hello

  Could you please check if Bluetooth is enabled in the BIOS?

  Press F1 when you start the system to get into the BIOS. On the Security tab, select access port i/o. turn on Bluetooth and check if Bluetooth is displayed in Device Manager. Also, check if you are able to find Bluetooth radios in Device Manager.

  After the back if the problem persists!

  Best regards

  Mithun.

• problems with bluetooth

  Hello everyone.

  I have an aspire8290g with bluetooth button. My mobile samsung works with usb is plugged. I tried all of the updates. He won't know.
  Am I missing something easy?
  Thank you

  Hi Steve,

  1. what operating system is installed on the computer?

  2. are you able to connect other Bluetooth devices to the computer?

  The first thing you need to check is that the Bluetooth device is installed correctly or not. Check in Device Manager and see if you have a yellow fringe on the Bluetooth.

   

  Step 1:  Check if one recognizes oneself in the Device Manager, go to Device Manager follow the steps listed below.

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand the device; check if it shows all the marks on your drivers listed.

  Check the Bluetooth device is discoverable and that your computer is set to enable Bluetooth devices to connect to your computer.

  Step 2: Also, try the following steps:

  a. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  b. click on the Options tab, select the Allow Bluetooth devices to connect to this computer check box and then click OK.

  Follow the steps in the below items to solve the problem.

  Connect to Bluetooth and other wireless or network devices:

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Method 1:

  The problems with Bluetooth devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

• manage the z-index property in the chrome browser (was: is there another problem with Chrome?)

  Hello

  I wonder is there another problem with Edge and Chrome.

  I know that something got sorted out but now I have a problem with rectangles (such as the hitboxes) not appearing is not in Chrome.

  Anyone know why this is happening?

  Hi Robyn,

  Looks like a problem with chrome. He is not able to manage the z-index property (although set) in this case. Due to which the user is not able to click on the button that is hidden by another element.

  There is a workaround solution you can do on board animate:

  You simply select the item named "s_cpl_fa_nav_x2" in the Panel edge ' Elements' animate and drag just below the element named "s_cpl_fa_0_guide_page1" and delete the selected item. This will place the first below the latter, with regard to the stacking order of the UI, and so the click event will work.

  I hope this works.

• Perhaps another problem with Css

  I think this is another problem with my CSS is applied because of a problem but I have really no idea.

  The site is Alliance of injuries. The problem is with the images in the middle of the page. They are supposed to be in three rows of 3-3-2, but for some reason some they just below the other. When I click on Home.css in the "View Source", it is titled 'Page not found' don't know why.

  Anyone who has any ideas I would appreciate it.

  Brad

  First thing - you must stop using filenames with spaces in them.  That can get you into trouble.  Use only letters, numbers, dash or underscore - nothing else.

  Next thing, the image and CSS links in this page (located at the root of the site) are all (except two) wrong links related document, for example,.

  If the page is already at the root of the site, there is no ".." as possible.  It is sure to cause you problems.  All these links need to be just like this one (which is correct)-
  (although the Home.CSS file does not appear on the server!)
  The reason why your images are displayed in a vertical table is that each of them is contained in a

  container with no specified width (was this width specified in the Home.css file does not exist?).  So that they appear along a horizontal line, you need to specify the width of the div and float tag he left.

• Problem with Bluetooth and audio playback

  Dear Sir

  I have laptop Dell latitude E5430 with windows 8.1 installed I successfully add the device LG HBS 730 Bluetooth headset all drivers are installed correctly but the sound playback in from not headphone the sound is still come from speakers computer, and sound reproduction apparatus, it has speakers / headphones and headset communication options. Here are a few shots that I join you for a better understanding.

  I'm waiting to hear about the problem

  Thank you

  

  Hello Ahmad,

  I would like to know some information about the problem so that we can help you better.

  Have you tried to connect another Bluetooth device? If so, it worked properly?

  Thank you for details on the question and your efforts to resolve.

  I also realize the inconvenience that you are experiencing due to problem of Bluetooth. I will definitely help you.

  This problem can occur because corrupt driver Bluetooth and settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please run this Microsoft fixit and check.
  See this link:
  http://aka.Ms/diag_device

  If this does not help, use method 2.

  Method 2:
  Please Update Bluetooth and audio drivers from the following link and check the number.
  Reference:
  http://www.Dell.com/support/home/us/en/04/product-support/product/latitude-E5430/drivers/Advanced?OS=w764

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• P70 Lenovo has a problem with Bluetooth car

  Hello

  I am the proud owner of a Smartphone P70. This drug so far works fine but the bluetooth stereo / hands-free driving me crazy. I can connect to the Bluetooth car without problem but when I get a call or make a call via the car radio - I'm losing GSM connectivity on both SIM cards.

  This question is also presented to others using the same model.

  So I think that there is a problem with the Bluetooth drivers installed on the phone.

  Can someone help me because this is driving me crazy and I can't dirve Vitsin - must carry the phone while talking and driving at the same time... The safety is not guaranteed!

  Apart from that, all the other features I need properly.

  Thank you!

  Ivan

  
  

• Problem with Bluetooth.

  Hello

  I have a problem with my Bluetooth, I can't allow it.

  I think that the image says more than words.
  Any idea?
  OS: Windows 8
  Laptop: HP Pavilion g6.

  Thank you.

  

  Hello:

  If you are sure, it came with bluetooth and it has a Ralink WiFi card, see if you install the latest driver bluetooth of Mediatek (Ralink) work...

  Bluetooth Driver (RT3290/MT7630)

  25/06/2014

  V11.0.754.0

  Win7 Win8 Win8.1

• Yet another problem with WRT54G2...

  Well I had on and off problems with my WRT54G2 router, I got it for about 3 months now and recently full of endless problems... No, my problem is when I turn on my PS3, I get a pop-up message on my computer, there is an IP address conflict, I've never had this problem until today... my PS3 has its own IP address... so when I turn on my PS3 I lose connection on my computer... honestly im tired of having problems with the * beep * thing... anyone has a solution?

  Toomanydonuts is right, can be your PS3 and your computer gets the same Ip address of your router, which is causing this problem and this is why you are not able to go online. It's better, you provide a static Ip address to your PS3 and this will solve your problem.

  You can assign a static Ip address on your PS3. IE: 192.168.1.10 subnet mask: 255.255.255.0 default gateway / router: 192.168.1.1 preferred DNS: 4.2.2.2 and auxiliary DNS: 192.168.1.1. Once provide you this static IP address to your PS3 it will solve your problem.

• Problems with Bluetooth connectivity

  For years I tried to get some Bluetooth designs to work on Windows 7.  I had never succeeded and was convinced, it must be a hardware problem, but a new network controller does not solve the problem.  Even a mouse brand Lenovo brand new, I bought has never been able to connect.  After having tried several forums and proposed corrections, I came finally on a dark patch using MS services to reset the password to logon.  Finally, I was able to use the mouse, I bought about 5 years ago.  This hotfix now allowed me to use my bluetooth designs as I should.  The absence of useful answers is troubling, but the fact that there is still the issue is even more troubling.  A quick search will show you how common is the prblem, and I think that NOT getting a bluetooth device to connect is more common than to make it connect.  Given how long the bluetooth has been around, I find this totally unacceptable, and it seems that MS is unable or refuses to address the issue.  So, what gives?  Is this a problem that will not be fixed anytime soon?  Even with the fix that I applied, bluetooth connectivity is never guaranteed to start, and I always ask myself if I have to go through to reset the password to logon through 'services', restart services, re-login to the design and reload designs them drivers.  I wish I could count on my legacy and connect without any additional steps.  Or I have to wait another ten years before the bluetooth is a viable technology?  I have a $25 speaker that always connected immediately, without fail once.  I think that MS could find a permanent solution to another perfect close of OS, or at least the best I've ever used.

  I tried to locate the forum which has the solution that worked for me.  Sorry for the late reply.  The problem occurred on a laptop Lenovo Y530 'Ideapad '.

  The fix involved using MS services to reset the "password" under: Bluetooth Support Service > properties > log (tab), select "this account", and then browse to (?) "Local service".  Remove password in local service and confirmation PW.  Select 'apply' and then Windows prompts you to restart the service for new PW.  Select 'ok', and then restart the service.  Once I did my bluetooth products have been 'discovered' and drivers would charge.

  Sorry I can't explain it better.  I'll try to find the real tutorial I used.

• iOS10 problems with Bluetooth

  Being deaf, I rely on my Oticon streamer is a Bluetooth device and since the installation of iOS 10 I fought for it to work properly.  I did a hard reboot, coupled with the unit several times, and even reset network settings - nothing seems to solve the problem of the phone switching device to stream on phone I try to have a conversation.  I hope that there is a difficulty, and perhaps an iOS 10 day to continue the work some of the many bugs besides the lack of Bluetooth.

  Ignore.

• 15z-j100 wanted: problems with bluetooth

  I have a bluetooth TV and it works with my computer, but when I tried to use the Bluetooth headset I can't do.

  I can't find a program or what ever I need to solve this problem.  Would appreciate any help.  The computer is a

  Want 15z-j100.  I can't find when I ask it to search for bluetooth devices.

  Try this:

  Using Bluetooth (Windows 8) devices

• A USB device has malfunctioned... Problem with Bluetooth?

  I tried the suggestions.  Recently upgraded to window 10 - does not work on my machine.  Had to go back to windows 7.  Only problems since then.   Bluetooth works fine so am not sure why the message keeps appearing.  Tried, Fixit but no luck?  Any suggestions?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  As all devices have same also have USB device associated drivers. Sometimes correct drivers did not get detected after the

  initial setup for the reinstallation of the drivers to solve the problems.

  Method 1: Run the hardware and devices troubleshooter.

  The hardware and devices Troubleshooter is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  Open the hardware and devices Troubleshooter

  If the problem persists, follow method 2.

  Method 2: Uninstall and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  2. Click the hardware tab.
  3. Click the Device Manager button.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer and reinstall the USB controllers.
  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

  Method 3: Install the USB driver manually

  Reference: install a USB device

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• Another problem with socket: socket does not receive the although it is ready

  Hello!

  I read a lot of discussion about the casings, but I wasn't able to find a working solution:

  I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.

  I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!

  For this I use wap2.

  5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).

  Can you give me a clue what I'm doing wrong?

  This only happens on the device, not in the Simulator!

  That's what I tried:

  -with the help of a DataInputStream (I wasn't able to find a difference)

  -using another overload of. read()

  P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.

• Problems with Bluetooth on the computer.

  my laptop is having windows 8 pro but wanted devices show offline Bluetooth pls help

  Hi Bobo,

  Paired Bluetooth devices appear offline when you are looking for available devices?

  Please explain the problem more clearly so that we would be able to help you with this problem. Alternatively, you can refer to this Wiki for instructions on displaying a query with the correct information:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/effective-questions-get-help-faster/18584631-7f2b-4F01-88f5-f6660a5943c3