A USB device has malfunctioned... Problem with Bluetooth?

Similar Questions

• P70 Lenovo has a problem with Bluetooth car

  Hello

  I am the proud owner of a Smartphone P70. This drug so far works fine but the bluetooth stereo / hands-free driving me crazy. I can connect to the Bluetooth car without problem but when I get a call or make a call via the car radio - I'm losing GSM connectivity on both SIM cards.

  This question is also presented to others using the same model.

  So I think that there is a problem with the Bluetooth drivers installed on the phone.

  Can someone help me because this is driving me crazy and I can't dirve Vitsin - must carry the phone while talking and driving at the same time... The safety is not guaranteed!

  Apart from that, all the other features I need properly.

  Thank you!

  Ivan

  
  

• Windows is unable to recognize the device, one of the connected usb device has malfunctioned

  in my pc it shows the error when I connect a usb device is something like this perhaps datacard or USB key via a M/F, else if usb cable connected directly connected to the pc port it works fine... even changed the cable twice there is no cable fault

  It would seem that the cables tried maybe not until the correct USB connection plug. If you test this, according to the post Michael75951, and it still does not work, perhaps he could confirm bad cable(s.)

• Laptop HP Pavilion dv6 - 3016 s: USB (device not recognized) problems

  Hello

  on my laptop (Pavilion dv6-3016sl, bought in 2010) for a few months the USB connections give many problems with different devices.

  The first issue with the key external communication 3G (ONDA TM201) Internet: the USB key (which has worked for many months) is not recognized. I tried to reinstall the software and drivers (get the latest version from the website of the producer), but it is always unclear correctly.

  The visible in USB Device Manager error message is "cannot start (code 10) machine.

  Recently other USB devices have ceased to be recognized: powered USB Hub (HAMA USB 2.0 Hub 1:4, bus) and the Wired Optical mouse (Logitech).

  It is also not possible to install new USB devices (for example, a device of wireless sync to a cuff of training).

  I've done many controls of Microsoft on the integrity of the system, and I frequently run the Windows Update to be aligned to the latest version of the fix.

  You have any suggestions to analyze/fix this locking problem?

  Thanks in advance,

  Moreno

  I know this may seem a rather harsh to suggest method, but at this point, I suggest backup of important things on your laptop computer to online storage. This is because you can use the USB storage for the moment.

  Once you have done this, it's time to locate your drives support usb recovery and licenses of all other programs that you have installed or recovery.

  Start on the recovery media.

  Use the HP Recovery Manager to perform a factory image recovery which will reinstall the operating system.

  Since you say that the usb ports work under Linux, then reinstalling the operating system Windows needs to solve the problem of usb port that you are experiencing.

• problems with bluetooth

  Hello everyone.

  I have an aspire8290g with bluetooth button. My mobile samsung works with usb is plugged. I tried all of the updates. He won't know.
  Am I missing something easy?
  Thank you

  Hi Steve,

  1. what operating system is installed on the computer?

  2. are you able to connect other Bluetooth devices to the computer?

  The first thing you need to check is that the Bluetooth device is installed correctly or not. Check in Device Manager and see if you have a yellow fringe on the Bluetooth.

   

  Step 1:  Check if one recognizes oneself in the Device Manager, go to Device Manager follow the steps listed below.

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note: If the control panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand the device; check if it shows all the marks on your drivers listed.

  Check the Bluetooth device is discoverable and that your computer is set to enable Bluetooth devices to connect to your computer.

  Step 2: Also, try the following steps:

  a. click the Start button, select Control Panel, click hardware and sound and then click Bluetooth devices.

  b. click on the Options tab, select the Allow Bluetooth devices to connect to this computer check box and then click OK.

  Follow the steps in the below items to solve the problem.

  Connect to Bluetooth and other wireless or network devices:

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Method 1:

  The problems with Bluetooth devices:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• Driver for old parallel port; This device has a problem: Code = 28 (0x1C)

  We organize a Dos based Windows 98 application and I need to find a driver for the integrated parallel port. The motherboard is an ASUS P5GD2-TMX/S. Both the local provider and ASUS only provide XP and more drivers for the motherboard. How can I determine the manufacturer of the parallel port and download the driver directly from their site? I done this before for the serial port and downloaded and installed a Sunnix driver, which worked.

  I did some research on the North Bridge, South bridge and the Super i/o chip set, but to no avail. Here is a copy of the output of sysinfo32.

  [Peripheral problem]

  Unknown device
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * INT0800\0
  Alloc resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xFFB80000 End = xFFBFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  Memory address range: Base = 00000000 00000000 Min End = x x = xFFB80000 Max = xFFBFFFFF
  Driver: Driver is not installed

  Standard 101/102-key or Microsoft Natural Keyboard
  Keyboard
  This device has a problem: Code = 27 (0x1B)
  System failure: try changing the driver for this device. If this does not work,
  see the documentation for your hardware.
  The registry key: HKEY_LOCAL_MACHINE\enum\ACPI\ * PNP0303\0
  Alloc resources: None
  Forced resources: None
  Start resources: no
  Filtered resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Core resources: logical Configuration 0
  IRQ: mask 0: x 0002
  IO range: Base = x 0000 End = 0000 Min = Max = x Alias 0060-0060 x x = x 00, decode = x 00
  Base = x 0000 End = 0000 Min = Max = x Alias 0064-0064 x x = x 00, decode = x 00
  Driver: Keyboard\0003
  Driver date: 23/04/1999
  Driver: idvkd.sys
  File size: driver not installed
  File date: driver not installed
  Driver: hidparse.sys
  File size: 44368 (0xAD50)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidclass.sys
  File size: 23520 (0x5BE0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.2222
  Driver: hidvkd.sys
  File size: 5088 (0x13E0)
  File date: 23/04/1999-22:22
  Legal name: Microsoft Corporation
  File version: 4.10.1998

  PCI card
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_2668 & SUBSYS_81A71043 & REV_04\BUS_00 & DEV_1B & FUNC_00
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C0000 End = xD20C3FFF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  Universal Serial Bus PCI
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_265C & SUBSYS_265C1043 & REV_04\BUS_00 & DEV_1D & FUNC_07
  Alloc resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Forced resources: None
  Start resources: logical Configuration 0
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  Memory address range: Base = xD20C4000 End = xD20C43FF minutes = x 00000000 Max = xFFFFFFFF
  HW revision: 004
  Driver: Driver is not installed

  PCI system management bus
  Unknown
  This device has a problem: Code = 28 (0x1C)
  The drivers for this device are not installed correctly. To install the driver
  for this device, click the driver tab, then click on set to update driver.
  The registry key: HKEY_LOCAL_MACHINE\enum\PCI\VEN_8086 & DEV_266A & SUBSYS_266A1043 & REV_04\BUS_00 & DEV_1F & FUNC_03
  Alloc resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Forced resources: None
  Start resources: logical Configuration 0
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  Filtered resources: None
  Core resources: logical Configuration 0
  IRQ: mask 0: xFFFF
  IO range: Base = x End = x051F minutes = x 0500 0000 Max = xFFFF Alias = xFF, Decode = x 00
  HW revision: 004
  Driver: Driver is not installed

  The motherboard seems to be Intel 915P chipset.

  Don't know if it will help, but try installing the software Intel(r) utility V6.0.1.1002 of Installation for Windows 2000/XP/2003 (under Win2K - others) for P5GD2 motherboard from the following link that appears in support of Windows 98 Second edition:

  http://www.ASUS.com/motherboards/P5GD2/HelpDesk_Download/

  Then restart the computer.

• IAM has a problem with my product key

  IAM has a problem with my product key

  Hello, Arm883,

  Product key for which the application: Windows, Office

  Windows: Select Windows version from the drop-down list and repost the question.

  http://answers.Microsoft.com/en-us/Windows/Forum?tab=answered

  Office: Select desktop from the drop-down and repost the question.

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?TM=1372280499137

  Or, a response back with what software is the product key and we can move to the correct forum.

  Thank you.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• My end of 2010 has a problem with wifi: no other device on the network is

  Hello

  I have Cox 30 broadband down and 10 + up - connected with the new airport

  For some time my late 2010 MacBook Air worked really slowly on the network. My Pro iPad speed test of 25 + down and 10 + - while the macbook directly next to it not less than 10 years down and under 5 up

  Does anyone know if an update or something had an impact of Air?

  Thank you

  Graeme

  If you hold down the option key by clicking on the icon of your airport. You should get an option to run network diagnostics. You could also try removing the network of Macbook Air and add it again. If by chance you are using bluetooth, it could be a problem with switching in the router. The bluetooth works on 2.4 GHZ. Configuration of the router to run on 5 GHz could help. Or change the channels.

• A USB device has exceeded the limits of its hub port power

  Hello. a problem occurred while my daughter was using my pc. She is often in and out with his flash drive. I'm come home to find that she had swapped mouse USB cos the orig had stopped working. Same thing happened with the replacement and I got the above error message. Now the mouse has frozen and no USB device is recognized. thought I had a defective mouse but brand new purchased and all also died. Have tried to throw the mouse in all USB ports but none works.

  I'm not getting no messages. My flash drive lights up momentarily when inserted then goes dead and does not appear on the list of Solution Explorer. I'll have to navigate in Windows using the keyboard only - a pain.

  I tried to uninstall all USB devices through Dev mgr, then restart. Everything went through the reinstallation but no joy.

  I have 4 in the back and 2 on the side front of the PC.

  PC is a HP Pavilion, Pentium® 4 CPU 3 Ghz, 1 GB RAM, Windows XP Home SP3.

  Can someone please help? I have followed several threads on the net, but none fit my situation.

  ' ppreciate it.

  Hi turloch.

  • Have you recently had any power surge?

  You can try to perform a restore of the system on the computer to the point while it was working fine and check if it helps.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Because the uninstall and reinstall all USB controllers on the computer did not resolve the issue there is a possibility that it's defective hardware device on the computer that is independent of the windows.

• Problem with Bluetooth and audio playback

  Dear Sir

  I have laptop Dell latitude E5430 with windows 8.1 installed I successfully add the device LG HBS 730 Bluetooth headset all drivers are installed correctly but the sound playback in from not headphone the sound is still come from speakers computer, and sound reproduction apparatus, it has speakers / headphones and headset communication options. Here are a few shots that I join you for a better understanding.

  I'm waiting to hear about the problem

  Thank you

  

  Hello Ahmad,

  I would like to know some information about the problem so that we can help you better.

  Have you tried to connect another Bluetooth device? If so, it worked properly?

  Thank you for details on the question and your efforts to resolve.

  I also realize the inconvenience that you are experiencing due to problem of Bluetooth. I will definitely help you.

  This problem can occur because corrupt driver Bluetooth and settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please run this Microsoft fixit and check.
  See this link:
  http://aka.Ms/diag_device

  If this does not help, use method 2.

  Method 2:
  Please Update Bluetooth and audio drivers from the following link and check the number.
  Reference:
  http://www.Dell.com/support/home/us/en/04/product-support/product/latitude-E5430/drivers/Advanced?OS=w764

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with Bluetooth.

  Hello

  I have a problem with my Bluetooth, I can't allow it.

  I think that the image says more than words.
  Any idea?
  OS: Windows 8
  Laptop: HP Pavilion g6.

  Thank you.

  

  Hello:

  If you are sure, it came with bluetooth and it has a Ralink WiFi card, see if you install the latest driver bluetooth of Mediatek (Ralink) work...

  Bluetooth Driver (RT3290/MT7630)

  25/06/2014

  V11.0.754.0

  Win7 Win8 Win8.1