Another way to generate ORM for database

Similar Questions

• Is there another way the valid values for arguments?

  Hi, I need to know if, when you use a layout that dynamically changes the valid values of the argument can change the valid values?
  
  There is an argumentValidValues(), but when I put:
  
  Table = argumentValidValues()
  
  nothing won't change, does anyone know if this is possible or is there another way to do it?
  
  Thanks in advance

  You can refresh the valid values for an attribute (usually included in a list combo box drop-down list) in the presentation of the subject of a BPM if you call the logic:

  Note that this logic must have double
  quotation marks that surround the name of the attribute
  refreshValidValues ("customerName")

  This means that the attribute (in this example customerName) has its valid values from a 'dynamic method' instead of a 'static' list

  When the logic above is performed, the method associated with the attribute runs automatically and you should see your values in your dropdown menu dow to cool off.

  Be sure to include the double quote characters in the logic. You have to type:

  This logic will NOT work because it does not have double quotes
  refreshValidValues (customerName)

  This is a common mistake and will cost you one day of scratching your head while you try to figure out what went wrong.

  Hope this helps,
  Dan

• Is there a way to generate the command CREATE DATABASE from the DB?

  Version: 11.2.0.3

  Is there a way to generate the CREATE DATABASE command from an existing database?

  You can empty the CONTROLFILE to trace and you'll get a CREATE CONTROLFILE statement which you can turn into a CREATE DATABASE statement.

  ------------

  Sybrand Bakker

  Senior Oracle DBA.

• ORM for Sqlite3

  Hello

  I'm developeing a BB10 request where I have an obligation to use ORM for database.

  Y at - it support for ORM BB10 SDK? I searched a lot but did nothing.

  We decide to use the Sqlite3 database. If native BB10 sdk does not support this, then what should be the ideal way (more precisely, the ideal design) to add the ORM support in our project.

  Thanks in advance.

  There is no ORM for waterfalls. Even if SQLite is supported.
  Take a look at this example: https://github.com/blackberry/Cascades-Samples/tree/master/quotes
  And the loot to the documentation: https://developer.blackberry.com/cascades/reference/bb__data__sqlconnection.html

• Best way to generate dynamic html in apex

  Hi all
  I need to create a complex page as html with tables in tables, ajax and a very large number of elements (text fields).
  Would like to have your opinion to know what the best solution to create this page. The HTML code in PL / SQL, it is difficult to manage in the future. There is another way to generate code HTML, without being inside PL / SQL?

  Hi 819517,

  You should be able to get your desired using regions and sub-regions effect.
  As you create your own custom for both templates.

  You can find issues with more than 50 fields on your form.
  You can work around this by re using domain names (as in a form of multi line).

  If you submit several hundred fields, you will need to look at settings for modplsql in apache (if you use it) because the maximum number of form fields is a parameter in the conf file.

  Concerning

  Michael

• Generating heels for access to the webservices in Eclipse plugin, JDE

  Hello

  I'm developing a sample application to access a Web service using Eclipse JDE rained on.

  I've generated stubs using axis.jar.

  but it's all classes are directly or indirectly pointing to java.io.Serialiazable. is not in the J2ME packages.

  y at - it another way to generate the web services stubs...?

  Please let me know... URGENT...

  Thanks in advance

  Try to fill the rest of the table with null values or strings empty inputObject so that each element of the array has been set to something.

• I want to improve on Icloud storage 5 GB to 50 GB, but I don't have a credit card. Is there another way to pay for it like buying a gift card to itunes and set up?

  I want to improve on Icloud storage 5 GB to 50 GB, but I don't have a credit card. Is there another way to pay for it like buying a gift card to itunes and set up?

  You can use a gift card or a debit card to pay for it.

  (137091)

• Best way to generate the software clock for USB-6501 of Measurement Studio for c# VS2008

  Hi all

  I wonder if there is a better way to generate a clock software for USB-6501 of Measurement Studio for VS2008 in C Sharp?

  I have developed a clock using C Sharp "Thread.Sleep (msecPauseTime)"; and statements to switch digital output high and low. There are a few things I noticed in creating a software clock in this way:

  1. The smallest delay by the Thread.Sleep command time is 1 millisecond (which means higher clock period is 2 msec-500 Hz, not holding not ball account no. 2 below).
  2. Sometimes the delay I see on an oscilloscope is considerably longer than the delay that I specified in the sleep command.

  In my application, I create signals (a clock, a latch enable and data series) to control what an attenuator step through the USB-6501 RF connected to a USB 2.0 on my computer. This particular step RF attenuator can accept clocks with frequencies up to 10 MHz, so I would like to generate a software clock (without having to connect to an external clock to a line of input on the USB-6501) which is closest to this maximum frequency, and I think that the USB2.0 line could handle clock speeds over 500 Hz. Also, I would like to know why the delays that I see on the scope are sometimes longer than the time specified by the Thread.Sleep command. Is it caused by the suspension of the execution of my program processor for something else, as I suspect? Of course, this isn't a big deal, because it does not affect the time as my serial data and pieces change compared to my clock. However, I would like to know why it does this.

  I appreciate your help.

  Thank you

  Jonathan Becker

  Doctoral research engineer

  Carnegie Mellon Silicon Valley

  Jonathan,

  Since the USB-6501 DIO is software programmed, you are at the mercy of the planning of the operating system and won't be able to work reliably with an external clock in the software.

  You can try to set the priority of your thread 'generation of clock' to improve performance, however, because Windows is not a deterministic operating system, there are still no guarantees.  Operating systems are not required to honor the priority of threads.  You can find examples and information on the definition of the priorities of the threads in c# here:

  http://msdn.Microsoft.com/en-us/library/system.Threading.thread.priority.aspx

  Kind regards

• Best way to generate a PWM for a stint with LabView2010 and a laptop

  Hello

  as mentioned in the title, I'm looking for the best way to generate a PWM signal to a relay. I want to use a laptop computer and the LabView2010 for she. I have read through several topics, but after a time that he just got more confused. For example the NI USB-6008 OEM case seems to be a solutiion at low prices, but I don't know if I can use for the generation of PWM signals like this thread says is not possible:

  http://forums.NI.com/T5/Multifunction-DAQ/using-PWM-on-NI-6008/m-p/231860/highlight/true#M13339

  But then again this thread right here makes it seem as if it was doable:

  http://forums.NI.com/T5/Digital-I-O/generating-a-PWM-using-USB-6008/m-p/421654/highlight/true#M5527

  Once again in abbreviated form.

  What I need:

  -the best way to generate a PWM signal to control a relay

  What I have so far:

  -LabView2010

  -Laptop

  If possible, it would be good to have two channels for two separate signals, but it is more low importance right now.

  Hey Kambra,.

  The first thread you mention is correct, you can't make output PWM in any deterministic mode with a 6008. The 6008 is strictly software timed, which means that each digital writing that is done in the unit must go through the operating system and down to the device. And there is a lot of jitter of the involved BONE. The second article you mention says the same thing. They emphasized that they could reduce the jitter of some, but still can not remove it entirely. In the second thread, they mention using a M-series USB device do output PWM deterministic (timed material).

  The compromise really down to your application and its requirements. If your application to control the relay requires no determinism, then you can use the 6008. If you need precise control over the relay, try the USB M series.

• Y at - it another way to download update Windows 8.1 for Windows 8?

  I tried to download the update Windows 8.1 all day (Finally, in all cases for the past 4 hours) and get literally anywhere I can't tell if the download happens at all, because the Windows 8 interface provides no details.  So, as far as I know, nothing has been done and the download is stuck at 0%, or maybe it's to 99.99% and the bar did not update.  I know that the bar does not move.  I also know that I can download other applications on the store and they download and install quickly, I also know that my current download speed is 81 MB/s and finally (I calculate the expected download time, but the user interface does not provide sufficient details to find out), I know that I got the same problem with an update earlier today When you try to download from the Windows Update application, but when I used my browser to download the file you download instantly.  So, is there another way to get the Windows Pro 8.1 update?

  If you want to switch to Windows 8.1 free the only way to do it is to download from Windows 8.0 store. The only other way is to buy it. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it is

  employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• I have photoshop elements for Christmas 14.  When I go to install it, he invited me for a serial number which I can't find anywhere on the disc, disc sleeve or box product.  Y at - it another way to find the serial number for this product, so I can't cont

  I have Photoshop elements for Christmas 14.  When I go to install it, he invited me for a serial number which I can't find anywhere on the disc, disc sleeve or box product.  Is there another way to find the serial number for this product, so I can continue the installation?  And no, I have not installed or registered this product before.

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

• The creation of Oracle 11 g DSN for database on another server

  Hello

  How to create a database of Oracle 11 g DSN for a database that is lying on another server? I tried to use the Microsoft ODBC Administrator tool, but it gives me options only for databases on my own machine.

  Hello

  Check this thread can help you https://forums.oracle.com/thread/2479208

• I want to add content that changes in a civil way, such as 'thought for the day'. It can then display another text or an image on a proposed agenda. Is this possible? Robert.

  I want to add content that changes in a civil way, such as 'thought for the day'. It can then display another text or an image on a proposed agenda. Is this possible? Robert.

  Hello

  If you have the code incorporated with you, then you can insert it in the Muse.

  You just need to go to the page creation and go mode to "object > insert HTML code ', paste the embed code, and click OK.

  Place the output area according to the requirement of you.

  Concerning

  Vivek

• Generate URLS for form

  How can I generate a url for a form in Eloqua 10?

  or I have to put the form on a landing page, first?

  I need the URL of the form to place in an iframe so don't want to create a whole landing page as such.

  I'm new to 10 Eloqua so apologies for the basic question, but I couldn't find the answer elsewhere on topliners.

  Hi Martin!

  Welcome to Eloqua and Topliners.

  Unfortunately, you will need to create a landing page where you place the form and then put the URL of the page in an iFrame. It of really easy and simple to do and takes only minutes. Make sure that the dimensions of the page corresponding to the dimensions of the iFrame. Coders may be another way, but it propably takes more time.

  The form will have a url that you have defined in the parameters form, but as far as I know it can be used as a stand-alone www url.

• I have a HTML5 form that sends a null (%) if the user does not have a choice. It works fine, but I get an error of W3c on the value of '% '. Is there another way to send a NULL value?

  I have an HTML5 form that allows the user to select 1 of 6 provinces of Costa Rica. If they do not select a Province, I use php code to send a NULL value and the other selections research of the form looking for all Provinces. If they choose a province, we are looking for database records that are found in this province.  Currently I use the value = '%' as the selected value if the user does not have a choice. It works and looks in all provinces, but I get an error of W3c checking on the value = '% '. Y at - it another way to send a NULL value. PS: I have the same problem on the following form which allows you to select the Business category. The page is http://www.yellowpagescr.com

  Here is a copy of the code. The RED line works but gets a W3c issue error of the test page. :

  < form = class "navbar-form Center navigation bar" role = "Search" action = "#searchresults" method = "get" name = "selectterms" id = "selectterms" title = "" >

  < select name = "province" autofocus class = 'copyright' title = "Click to select a Province (optional)" >

  < option value = '%' selected = "selected" > all Provinces < / option >

  < option value = "alajuela" > Alajuela < / option >

  < option value = "cartago" > Cartago < / option >

  < option value = "Guanacaste" selected > Guanacaste < / option >

  < option value = "heredia" > Heredia < / option >

  < option value = "Limon" > Limon < / option >

  < option value = "Puntarenas" > Puntarenas < / option >

  < option value = "San Jose" > San Jose < / option >

  < option value = "Other" > other < / option >

  < / select >

  The correct way.

  " value =" " " selected disabled> - optional Province.

  Nancy O.