Display shows out of reach

Similar Questions

• Connection Internet randomly shows out of reach

  original title: Internet connection

  I have a laptop HP with windows Vista. suddenly the computer cannot connect to the network, I used the wire and wireless. I get a message saying to make sure your computer is within range of the network and the match of the access point or wireless router networking

  Hi Jake 2000,

  When you right click on command prompt, you receive the option to select run as administrator? If not, restart your computer and immediately press the F8 key to access the Advanced Boot Options Menu. Select safe mode with network. You should then be able to type i-pconfig/all.

• applied range__i resolution the resolution of my screen to the highest frequency and my screen is black screen and out of reach, I restarted my pc, but when it came to the login page my affixed screen again the same how can I get it back

  I chose my resolution of windows xp to the highest frequency screen and my screen become black and displayed out of reach, I restarted my pc, but when it came to the login page my screen shows again her even, how can I get it back?

  Hi hcosdihv,

  Start the PC in safe mode then go back to the display settings and set the resolution to a lower level.

  You start in Mode safe by constantly pressing the F8 key as your PC starts. A menu will appear and you must select the Safe Mode option.

  Once you have changed the screen resolution, you can restart your PC normally.

  Make sure that you "only" to select an output of the range option.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

• Apple Watch gives a warning sound or vibration when it is out of reach with your iPhone?

  Apple Watch gives it its warning or vibrates when it is out of reach with your iPhone? If so, how to set up? If this is not the case, why they have this important function, so we do not lose our phones?

  Hello

  Apple Watch does not currently offer them alerts audible or haptic if it is taken out of the reach of the paired iPhone Bluetooth. When devices are disconnected via Bluetooth, if the watch is also impossible to connect to a Wi - Fi network, known at that time, it will display the icon disconnected at the top of the face of the Watch:

  

  However, you can find this application useful third party:

  • Lookout - security, backup and missing device
    • "Tells you the distance between your iPhone and Apple Watch and warns you if they are about to lose the connection."
    • https://iTunes.Apple.com/us/app/lookout-security-backup-missing/id434893913?Mt=8

  If you want to suggest that Apple considers adding Bluetooth disconnection as a built-in alerts, you can do so here:

  https://www.Apple.com/feedback/watch.html

• Error of flow OR MAX and attribute camera out of reach

  I recently bought a camera Point Grey Grasshopper3, it seems to work fine at point software fly Cap Gris provides, but I get an error NI Max when I try to do a simple puncture (see below). This error appears every time I try to catch a time image the first after the opening OR MAX, even if the flow is set to maximum. Then I change the flow under control of the unit to any integer 125000000 max, and the camera works very well for MAX. It will capture images as much as I need. Then I save the camera output MAX, open MAX once again, it shows my saved settings, I'm going to capture images and I get the error again. If I change the range regardless of the number and it works again in the same session in MAX.

  I had a gray point Zebra2 work very well and he used in my program LabVIEW with IMAQdx to acquire images. When I try to use grasshopper3, LabVIEW returns error attribute camera out of reach of the VI camera configuration. I use to test the camera of the VI is the camera just to open, configure acquisition, start acquiring, get the picture, cancel the acquisition and nearby IMAQdx camera configuration. I did twice open MAX, change the flow, save the camera, close MAX without grasping an image and then was able to acquire images in LabVIEW in the first inning. I would run the VI once again and then it returns the error to attribute camera out of reach. I changed the packet size, resolution and the frame rate of the camera with a difference in errors.

  Since I am able to images of the stream from the camera to the gray point fly capture and Max after activating/deactivating the flow layout, it leads me to believe there is some sort of error MAX/LabVIEW that prevent me to capture the images.

  Any ideas? Has anyone else had this problem with MAX and LV?

  Looks like the point Grey cameras showed this error before the firmware on the basis. See this linkfor such a forum. I would monitor the camera (*.icd) file located in the data folder IMAQdx in public Documents to see if the actual value is be replaced after the configuration of the camera has been saved in MAX. There is a chance that the GigE. XML file which is transferred from the camera is overwrite these values in the unacceptable value. See this linkfor a KB about this error, which leads me to believe that this may be the problem.

• Dual monitor dilemma: dvi - d, out of reach

  I have been running this Setup dual monitor since late December and have had no problems so far. But before I did my primary secondary monitor and tried to run 'Civilization beyond Earth' (which I've cranked up for the highest possible settings) on it and was greeted with "dvi - d out of reach of the 67.5 khz/60 Hz" on a black screen. So I restarted my computer, which only complicated the issue because my LG (which again, read "dvi - d out of reach of the 67.5 khz/60 Hz") was my main monitor, and so I couldn't connect. It's been fixed only when I unplugged my other monitors the dvi cable, and my login screen appears.  I can run the other monitor as my primary, but only if the LG is unplugged, and as soon as I plug my LG it becomes main monitor and displays new "dvi - d out of reach of the 67.5 khz/60 Hz", which means that I can't do my other monitor primary so that the two are connected.

  My questions are: You have an idea, what is the problem? Or how to fix it? I can't stop the LG to the monitor main spot? Why is it read "dvi - d out of reach of the 67.5 khz/60 Hz" when the two are connected?

  Graphics card: AMD Radeon R9 270 X

  Monitior problem: 20 "backlit LED LG 1600 x 900 display

  Hey Joe,

  Thanks for posting your concern on the Microsoft community.

  With the description you've provided, looks like there could be some problems with the resolution of the video card.

  I suggest you increase the refresh rate of the video card and check if that helps. You can follow the steps described in the following article:

  http://Windows.Microsoft.com/en-us/Windows/correct-monitor-flicker-refresh-rate#1TC=Windows-7

  Note: If you notice flicker on a CRT monitor, you may need to change your screen resolution before changing the refresh rate. The resolution is high, the higher your refresh rate should be, but not every screen resolution is compatible with every refresh rate.

  For more information, see

  Change your screen resolution:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Changes to the refresh rate affect all users who log on the computer.

  Hope this information helps. Let us know the State and do not hesitate to write back to us for assistance.

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• HP 15-R033TX: not able to adjust the brightness, it's showing out of stock?

  I installed win 8.1 on my new laptop. But I am not able to adjust the brightness. (as pictured)

  Brightness is showing out of stock,

  also "standby" mode does not work.

  (does not appear the option to sleep)

  Suggest a solution?

  

  Hello:

  First download and install the chipset driver and reboot.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-140540-1 & CC = US & DLC = in & LC = on & os = 4158 & productOid = 7308901 & sw_lang =

  Then download and install the Intel HD graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130111-1 & CC = US & DLC = in & LC = on & os = 4158 & productOid = 7308901 & sw_lang =

  Then download and install the Nvidia graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130198-1 & CC = US & DLC = in & LC = on & os = 4158 & productOid = 7308901 & sw_lang =

• HP Officejet 4630e all in one: the time on my printer display shows the wrong time

  The clock on the display shows the wrong time.  Does anyone know how to rectify this please.

  Hello

  The date and time settings would cause problems of synchronization with Eprint if incorrect. The date and time should be accessible from the Preferences menu.

  Try this

  Power reset

  1. Without putting off the product, disconnect the power cord from the back of the product.
  2. Wait 30 seconds and then plug the power cord into the back of the product.
  3. If the product is not already on, press the power button to turn it on.

  Now, try to change the date and time and check.

  Where this fails, try this

  Setup > tools > restore defaults

  Try to set the date and time of return

  NOTE: This will remove network also settings so you need to redo the configuration of the network

  Measures to restore the network configuration

  http://support.HP.com/us-en/document/c03834108

  Although I am an employee of HP, I speak for myself and not for HP.

  Click on the thumb BRAVO upwards on the left to say 'thank you '.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The Smartband is supposed to vibrate if out of reach of Bluetooth of the phone?

  I read somewhere that if the Smartband speech is out of reach of Bluetooth of the phone, it starts to vibrate. However, I left the phone somewhere and walked very far until I lost the connection, but the talk of Smartband never vibrates. I was wondering if there is a feature or I need to do something to turn it on. Thank you!

  This was the case for SWR10, he did. And SW3 can do it if you take a google reader app. But never noticed on my SWR30.

• I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  After starting my Windows I got these message below

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 2052

  More information about the problem:
  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82E9837B
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini041011-01.dmp
  C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
  C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt

  
  C:\Windows\Minidump\Mini041011-01.dmp

  View your dump using file:
  BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

• movedleft page screen out of reach. How to get back right in sight?

  page of the screen moved left out of reach. How to get back right in sight?

  If you can see and take the title bar, start here. If this is way off the screen, see this.
   
  How can I move a window off the screen in Windows 7?
  http://ask-Leo.com/how_do_i_move_an_offscreen_window_in_windows_7.html

   

• BlackBerry Smartphones GPS works out of reach?

  If I am out of reach of the cell phone, is the GPS still works on the curve?

  Thank you

  Well, I'm back from my camping trip and the answer is that the GPS component does NOT work if you are out of range of the network.  I was at the top of a mountain of ft 12 k and he said "clear need from the sky."  What a pity.  I would like to think that I had a lifeline GPS even when I was on the range of cells.  (I use Sprint).